Hi
If I dump a replicated Db and restore it onto another DB, how do I switch off replication from the restored DB. I believe there were some scripts developed for this in 6.5.
Any suggestions will be appreciated.
Rich
I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.
When i tried the sample on a newly created database it worked fine.
Is there any solution to make the restored database to work for service broker.
Thanks
Prashanth
At the moment my asp.net app is working ok and I can connect to the database using windows authentication, however i'm trying to use sql authentication on my local computer.i'm using sql server studio at the moment to manage the database. And tried numerious combinations of things to try and get it working and allow me to connect to the database using SQL authentication but still no luck :(can anyone give me some rough step by step instructions to setting up the sql username and password for forms authentication and activating it for a certain database?thanks
View 1 Replies View RelatedHi
If I have a connection open which is in database master, can I switch to another database within that connection without having to close the connection and recreating it?
Thanks
Steve
Guys!
I'm using SQL Mail to send out Emails to Customers re: outstanding Invoices. I also use SQL Mail on the same box to send out emails to our Sales Reps with summaries of outstanding invoices. Now, I've set up multiple outlook profiles on the server. I tried using
xp_startmail @user = 'CreditControlDept'
xp_sendmail .... (to customers)
xp_stopmail @user = 'CreditControlDept'
xp_startmail @user = 'InvoiceTracker'
xp_sendmail...(to internal sales reps)
xp_stopmail @user = 'InvoiceTracker'
DOES NOT WORK!!! the profile does'nt switch at all. SQL Mail sends out all the emails using the profile that it started with. How can I use xp_startmail and xp_stopmail to switch between different user profiles.
Regards
Uday
Could anyone help me to find out how to switch signs of "+" and "-" in matrix drilldown?
In columns drilldown i have wright (that means "+" for drilldown and "-" for drillup)
In rows I have it conversely, don't know why and don't where I can change this.
Thank you!
We have an active database that sits on SQL Server 2000 that currently has per seat license...but now want to switch to per processor.
If I go to ControlSQL Server 2000 License Set up...it doe not give me the option to choose per processor.
Do I need to un-install/re-install SQL Server 2000 and choose the per processor choice and then re-attach our database ?
It seems like a lot of work..please advise.
Thank you
I sometimes have problems when running index rebuilds due to the tran log growing too big. MS suggest switching the db from full recovery mode to bulk-logged mode fur the duration of the rebuild. Question is, when you switch a db from full recovery to bulk logged, does that invalidate the tran log backups up to that point? When the db is switched back into full-recovery mode, are the following tran log backups still in sequence?
Clive
Do you know of any resources in terms of Transact SQL in order to migrate from 6.5 to 2000?
View 1 Replies View RelatedI would like to know how I can switch from one database to another within the same script. I have a script that reads the header information from a SQL BAK file and loads the information into a Test database. Once the information is in the temp table (Test database) I run the following script to get the database name.
This part works fine.
INSERT INTO @HeaderInfo EXEC('RESTORE HEADERONLY
FROM DISK = N''I:TESTdatabase.bak''
WITH NOUNLOAD')
DECLARE @databasename varchar(128);
SET @databasename = (SELECT DatabaseName FROM @HeaderInfo);
The problem is when I try to run the following script nothing happens. The new database is never selected and the script is still on the test database.
EXEC ('USE '+ @databasename)
The goal is switch to the new database (USE NewDatabase) so that the other part of my script (DBCC CHECKDB) can run. This script checks the integrity of the database and saves the results to a temp table.
What am I doing wrong?
Hi
My C# application has a DataGridView which is bound to a DataSet. I used Visual Studio to add/configure the data source. Everything works fine on my computer. When I try to run the application on another computer I can't connect to the database, because it uses a wrong connection string.
How can I make a specific connection/connection string permanent for a specific application?
Thanks.
I've got a situation where I need to execute portions of a script against every database on a given instance. I don't know the name of all the databases beforehand so I need to scroll through them all and call the "use" command appropriately.
I need the correct syntax, the following won't work:
DECLARE DBS CURSOR FOR
SELECT dbname
FROM #helpdb
ORDER BY dbname
OPEN DBS
FETCH NEXT
FROM DBS
INTO
@dbname
WHILE @@FETCH_STATUS = 0
BEGIN
USE @dbname
The last line - the "USE" statement - is invalid. The following for example works:
USE master
But when supplied a declared variable a syntax error results for the use command because it expects an identifier.
So .. what is the correct syntax to pass a declared parameter to "USE", or is there another way to meet this requirement?
Thanks for your time.
i want to upload reports in ssrs , when i trying to configure reporting service configuration manager, getting error" there was an error while switching panels. The most likely cause is an error retrieving wmi properties. the exception details are access is denied . You must have an administrator on the report server computer to use this tool".
View 2 Replies View Related
It is simple question, just slipped out of my mind at this time...... how do we change Security Context for 2005 version from network to local system.
thanks,
Hi,
One of our client application launches a execuatable on server by calling master..xp_cmdshell. We are migrating to SQL 2005 and I would like to use the Context Switching feature
We have sql login client? which is used by clinet application and has very least privelge and have only required access to requried database and tables.
xp_cmdshell is disabled by default on our server and I would like to enable xp_cmdshell, launch the executable on the server and disable xp_cmdshell.I have created another SQL Login Bob? and is member of sysadmin. The below SP is created by logging in as Bob?. My objective is to grant execute access on this SP and grant impersonate access to sql login client? . So that client application connecting to SQL server can launch the executable by calling the SP
create proc Bob.[Bob_enable_xp_cmdshell]
with execute as 'Bob'
as
EXEC sp_configure N'show advanced options', N'1' RECONFIGURE WITH OVERRIDE
EXEC sp_configure N'xp_cmdshell', N'1'
RECONFIGURE WITH OVERRIDE
EXEC sp_configure N'show advanced options', N'0' RECONFIGURE WITH OVERRIDE
-- launch the application using xp_cmdshell and disable the xp_command shell
When I try to execute (exec [Bob].[jtr_enable_xp_cmdshell]
) the above SP by logging in as Bob, Im getting the below error
Msg 15247, Level 16, State 1, Procedure sp_configure, Line 94
User does not have permission to perform this action.
Msg 5812, Level 14, State 1, Procedure jtr_enable_xp_cmdshell, Line 4
You do not have permission to run the RECONFIGURE statement.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
The configuration option 'xp_cmdshell' does not exist, or it may be an advanced option.
Msg 5812, Level 14, State 1, Procedure jtr_enable_xp_cmdshell, Line 6
You do not have permission to run the RECONFIGURE statement.
Msg 15247, Level 16, State 1, Procedure sp_configure, Line 94
User does not have permission to perform this action.
Msg 5812, Level 14, State 1, Procedure jtr_enable_xp_cmdshell, Line 7
You do not have permission to run the RECONFIGURE statement.
Please note the SQL Login Bob? is a member of sysadmin fixed role. Thank in advance for you help.
With regards
GK
Hi,
I need to allow only a specific group of users to use a linked server. Rather than granting each user access in the linked server I create and give access to a local SQL login "link_user" and then grant the group impersonate to "link_user". The folllowing statements then work fine:
EXECUTE AS LOGIN = 'link_user'
SELECT * FROM OPENQUERY(linked_server, 'SELECT * FROM ...)
But when I use the exact same statements in a stored procedure I get the folllowing error:
Msg 7416, Level 16, State 1, Procedure linktest2, Line 5
Access to the remote server is denied because no login-mapping exists.
I need to be able to work with the result set which is why I use OPENQUERY rather than EXECUTE... AS... AT which works fine also in stored procedures!?
Is there another workaround then to create all users in the linked server security?
Rgds
Bertrand
Hello,
I need to pull data from an Excel Workbook (DTS Excel Source) where the data is stored in worksheets that are each named one of the twelve months of the year. The package is fired by a job that runs once a month. Currently, I have to go into the select statement of the Excel source before the process runs and change the name of the Worksheet that the data is pulled from.
How can I set up the sql statement for the Excel source so that I can pull from the Worksheet that contains the name of the current month?
Thank you for your help!
CSDunn
I have a query that gets the tables, columns, indexes, index_columns for all tables in a data base.
But, I need to be able to select any data base on the server
and then drill down into the tables, columns, etc.
I looked at sys.databases but can't see how to relate that to the
sys.tables to extend my query.
Is there a way?
I've looked at the information_schema area and catalog views
but I don't see a solution yet.
I would like to run the same query on multiple tables. So say I have a list of tables
@tableList = a|b|c|d
And then I have my query looping through the tables
for (@table in tableList)
{
update from @table
set = ''
}
Is there a simple way to do this in an mssql query, if so how do I get to loop through the query switching the table name?
I have a table which has been partitioned on BIGINT column.
Partitioned_Table (ID BIGINT, Name VARCHAR(10), Gender VARCHAR(2))
I have a left range partition function on ID column.
CREATE PARTITION FUNCTION Partition_Function ( BIGINT )
AS RANGE LEFT
FOR VALUES ( '20150601000', '20150602000', '20150603000' );
That means the first partition is IDÂ >= 20150601000Â to ID < 20150602000.
 I have to switch in a table into an empty partition.
Switching_In_Table(ID BIGINT, Name VARCHAR(10), Gender VARCHAR(2))
Before the switch in, I am creating a CHECK constraint on Switching_In_Table CHECK(ID LIKE '20150625%') Can I use like clause in this scenario?
Hi,
Can someone help me, I have this DB that needs to be restored. I have the full backup and the differential backup.
When I'm trying to restore my differential backup it prompts me this error "System.Data.SqlClient.SqlError: The log or differential backup cannot be restored because no files are ready to rollforward. (Microsoft.SqlServer.Smo)".
Then I try to create a test DB and restore my full backup there, it was succesfully restored and now try to restore my differential backup since I need the newest backup I received that error. I have already used the option leave the database non-operational but still the same.
Thanks.
Russell
Hi all--I used the following type of script to migrate tables, views and stored procedures from 'dbo' to 'hqmsuser':
alter authorization on dbo.PK_T_PQ_MASTER to HQMSUSER
alter schema HQMSUSER transfer dbo.PK_T_PQ_MASTER
go
This was per recommendations from the BOL to use instead of the 'sp_changeobjectowner' procedure. I returned the following error:
Msg 15346, Level 16, State 1, Line 3
Cannot change owner for an object that is owned by a parent object. Change the owner of the parent object instead.
Msg 15347, Level 16, State 1, Line 4
Cannot transfer an object that is owned by a parent object.
How do I find and change the parent object on this from 'dbo' to a non-dbo schema ownership?
Iâm looking for clearity on partition switching. The idea is to use many BULK INSERT statements into table dbo.X_n in parallel and when BULK INSERT for table dbo.X_n is completed, switch dbo.X_n into dbo.bigdaddy. I think this is the fastest way to upload a couple hundred GB of data.
In learning about partition switching (in part) from The Data Loading Performance Guide under Partition SWITCH, I hear the instructions to say copy the main table exactly to become a target. But in that same step (#1), I read that we need to change the default file group of the target (dbo.X_n) from the default file group. Then it says I need to match indexes and lists the filegroup as something we need to match with the main table.
As an overview of the partition switching strategy, I think the whole point of BULK INSERT with partitioning is to have seperate files (in same group) to enable concurrent uploading where each table has its own file. Once the upload is completed to a table (dbo.X_n) then we do the partition switch into the main table (dbo.bigdaddy). The data we just uploaded doesnât actually move, just the metadata for it.
When I read the instructions linked above, I hear âDonât have the same filegroup on your target as the main table. You must have the same filegroup on your target as the main table.â
Where am I disconnected?
I have 2 SQL Servers 7.
DBs on the first were upgraded from 6.5.
A DB has 2 users: dbo + user1. User1 is also uses user1 login
I created a DB backup on the first server copied it on the second & restored on the second into existing DB.
The problem is that after that user1 is not in the list of the restored DB on the second server & I can not
include it in the DB & grant access to user1 login to the same DB
and error message is
"15023 User or role "user1" already in exists in the current DB.
Hello,
Im running SQL 7.0 in production with no SQL service pack applied. I am trying to copy the database over to a test box running SQL 7.0 SP3. Both servers are NT 4.0 with SP6.1a. When I restore the database on the test box, I do not get the Users restored but I do get the Tables and other items. The SQL backup Im restoring from is a complete backup. Could the fact that the server Im restoring on is SQL 7.0 SP3 and it came from a pure SQL 7.0 server?
Thanks
Hello,
Is it possible to use a dump from a database to do a restore of a db on a different server?
I have a SQL 2000 server and having been given a file called test.dmp (I am not sure what SQL version this is). Can I use this to do a restore to a new db I have created on my server? If so what method do I use?
Thanks
reorg
The consultant hired as our Remote DBA for SQL Server 2005 recently changed the recovery model on our user database from Full to Simple. He explained this was necessary because the transaction log was growing very large and backing up the database when the model was set to Full was not shrinking it. Now, the master database and the msdb database are backed up daily along with our user database.
When we need to restore our user database, do we need to restore the master database and the msdb database too? What order should the databases be restored in?
Greetings!
I'm wondering if a db from an sql server 2000 restored on a sql 2005 server will use algoritms from sql 2000 or sql 2005. It seams to work quite well with a few exceptions, it's only for test anyway.
I'm sorry if this has been asked before but I could not see it.
Thanks
IceDread
hi all,
our datbase was restore but the publications were all gone.
however replication monitor shows publication and subscription.
worst. can create the publication with the same name because
it raises an error saying that it can't drop publication becuase
there is a subscription in it.
how can i remove the publication when the are already gone in the publication
folder but exist in the replication monitor
thanks for the help
Iâm looking for clearity on partition switching. The idea is to use many BULK INSERT statements into table dbo.X_n in parallel and when BULK INSERT for table dbo.X_n is completed, switch dbo.X_n into dbo.bigdaddy. I think this is the fastest way to upload a couple hundred GB of data.
In learning about partition switching (in part) from The Data Loading Performance Guide under Partition SWITCH, I hear the instructions to say copy the main table exactly to become a target. But in that same step (#1), I read that we need to change the default file group of the target (dbo.X_n) from the default file group. Then it says I need to match indexes and lists the filegroup as something we need to match with the main table.
As an overview of the partition switching strategy, I think the whole point of BULK INSERT with partitioning is to have seperate files (in same group) to enable concurrent uploading where each table has its own file. Once the upload is completed to a table (dbo.X_n) then we do the partition switch into the main table (dbo.bigdaddy). The data we just uploaded doesnât actually move, just the metadata for it.
âDonât have the same filegroup on your target as the main table. You must have the same filegroup on your target as the main table.â
Is there a way to restore a 2000 database to 2005?
will the restore process convert automatically to 2005?
I submitted the following T-SQL:
--BACKUP CERTIFICATE EncryptTestCert
-- TO FILE = N'c:backupEncryptTestCert.cer'
-- WITH PRIVATE KEY
-- ( FILE = N'c:backupEncryptTestCert.pvk',
-- ENCRYPTION BY PASSWORD = N'T0yp0calypse'
-- )
[Code] .....
However, the return data just contains nulls, instead of the original decrypted data. You can see above that I deleted the certificate, but then restored the certificate from backup. However, it doesn't work.
Hey Guys,
I have a .dmp backup file from an oracle database. I want to restore it into an sql server database. Can this be done?