Synchronising SQL CE Database With SQL 2000 Using Active Sync In 2003
Feb 8, 2007
HI ,
I Created one database named login.sdf in sql Ce ,i created one table login having two fields (username and password).it is working well.I trying to synchronise these with SQL2000 using Active sync.it is not working ..And one more things ,i tried to connect the default pocket PC 2002 emulator with Active sync.it is also not working.can anybody give some solution for these problem
Thanks in Advance
Regards
Ihsan
View 8 Replies
ADVERTISEMENT
Nov 3, 2005
Hi there,
Is it possible to, somehow, get a specific users password from active directory? The reason I ask is that I am writing a new system and really don't want the users having to remember yet another password, but rather be able to use there network password? I would like to write the logon section myself and not use any built in functions that anything may have.
Please can someone advise. I don't think it is possible but have been asked to persue the issue.
Thanks
View 2 Replies
View Related
Feb 20, 2008
hi i am using windows mobile application5.0 .i am new to this .while debugging it is showing error active sync not installed.what is this active sync,how to install it,how to use it .can you hlep me
thanks
View 1 Replies
View Related
Feb 28, 2006
Hello,I need a permanent synchronization between the "Active Directory" and the UserTable in my WebApp.I think a good solution for my interface can I realize with the "Stored Procedures" in SQL Server 2005. Is this the right way?I can create a Stored Procedure and a AD-Reader separately, that's no problem. But how I can import the "System.DirectoryServices"-Assembly in my Stored Procedure?Or is there an other solution?Thanks a lot!NussyStar*
View 2 Replies
View Related
Nov 17, 2006
Hi
I have a production system running sql 2000 server 32 bit
Now i am planning to move to SQL server 2005 64 bit setup .
I need to have a set up of both SQL 2000 and sql 2005 in parallel for some time until it is sure that the sytem can completly move .
The problem is how do i synchronize the data in the two servers when they are operating parallely.....
Please advice.
Thanks in advance......
View 1 Replies
View Related
Nov 29, 2006
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
View 2 Replies
View Related
May 12, 2008
Is there anyway to disable this functionality?
View 7 Replies
View Related
Oct 12, 2002
ACTIVE/ACTIVE SQL Server 2000 Cluster
This was my plan.
Physical box - box1,box2
virtual box - virtual1
i have a active/passive cluster virtual1 (primary node box1, secondary box2)
I am creating another virtual box on box2 as primary node by name virtual2)
whenever my installation setup runs my default server name is greyed out. it always requires a instance name.
Is that the way it should work?
i can only use instance for active/active failover?
please advice
View 1 Replies
View Related
Mar 22, 2007
We run several SQL 2000 SP4 instances on IA64 active/active cluster. The OS we run with is Windows Server 2003 SP1. We have different network cards : 2 network cards teamed for production purposes in domain X and 1 network card dedicated for problem solving in domain Y.
First we configured the cluster with only the 2 teamed network cards for production purposes in domain X. Later we introduced the second network card for problem solving in domain Y.
Everything looks fine. The (virtual) SQL instance listens on two different IP adresses on TCP port 1034. If we try to make connection via isql, EM or Query analyzer than we can directly contact the SQL instance from a workstation/server within domain X but this doesn't work form a workstation/server within domain Y. However if we use the specific TCP port in the connection in domain Y the connection is setup. We wish however not to use explicit TCP ports in setting up connections.
Has anyone experienced the same problem before or has anyone an idea how to solve the problem?
View 1 Replies
View Related
Sep 26, 2007
I have a Microsoft Cluster running on Server 2003 Entrprise. SQL 2000 8.00.2039 (SP4). 5gb physical memory installed.
With the databases online we run a test failover from the Cluster administrator. It takes about 30-40 seconds and completes without generating any Server Event log errors nor SQL log errors. Everything looks good from an administrative stand point.
However, when we test with running a series of queries to the databases, then failover, we notice that it can take up to 3 or 4 minutes before some of the databases will respond. Connections are not refused, they just sit there.
How can we troubleshoot this or does anyone have a similiar experience with this scenario?
View 5 Replies
View Related
Nov 4, 2006
I'm trying to replicate a table(s) in access 2000 to MS SQL server 2000/2005 programatically on a timed instance and then have these tables merged in SQL to create one table.
Any guidance appreciated.
Thank you,
View 1 Replies
View Related
Sep 27, 2002
Hi
Is there anyone who knows where I can get some information about
installing an ACTIVE/ACTIVE SQL 2000 Cluster server (MSCS).
I have no problem setting up an active/passive failover cluster.
Where can I get more information? Do I need two instances? Two databases?
What's the difference between active/active and active/passive?
Thanks!
View 2 Replies
View Related
Sep 11, 2007
Hi,
I need to import an SQL string from MS Excel 2003 to SQL SERVER 2000.
The string I need to import is composed by 5 different several blocks and looks like:
Code Snippet
CommandLine01 = "USE mydb"
CommandLine02 = "SELECT Block ..."
CommandLine03 = "GO
ALTER TABLE Block...
GO"
CommandLine04 = "UPDATE Block..."
CommandLine05 = "SELECT Block..."
The detail of the SQL string is at:
http://forums.microsoft.com/msdn/showpost.aspx?postid=2093921&siteid=1&sb=0&d=1&at=7&ft=11&tf=0&pageid=1
I am trying to implement OJ's suggestion:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2117223&SiteID=1
to use multi - batch processing to import the string to SQL SERVER, something like:
Code Snippet
Dim SqlCnt, cmd1, cmd2, cmd3
'set the properties and open a connection
cmd1="use my_db"
cmd2="create table mytb"
cmd3="insert into mytb"
SqlCnt.execute cmd1
SqlCnt.Execute cmd2
SqlCnt.Execute cmd3
Below is the code (just partial) I have, and I need help to complete it.
Thanks in advance,
Aldo.
Code Snippet
Function TestConnection()
Dim ConnectionString As New ADODB.Connection
Dim RecordSet As New ADODB.RecordSet
ConnectionString = "Driver={SQL Server};Server=myServer;Database=myDBName;Uid=UserName;Pwd=Password"
ConnectionString.Open
CmdLine01 = " USE " & myDB
CmdLine02 = " SELECT ACCOUNTS.FULLNAME FROM ACCOUNTS" ...
CmdLine03 = "GO
ALTER TABLE Block...
GO"
CmdLine04 = "UPDATE Block..."
CmdLine05 = "SELECT Block..."
RecordSet.Open CmdLine01, ConnectionString
RecordSet.Open CmdLine02, ConnectionString
ConnectionString.Execute CmdLine01
ConnectionString.Execute CmdLine02
'Retrieve Field titles
For ColNr = 1 To RecordSet.Fields.Count
ActiveSheet.Cells(1, ColNr).Value = RecordSet.Fields(ColNr - 1).Name
Next
ActiveSheet.Cells(2, 1).CopyFromRecordset RecordSet
'Close ADO objects
RecordSet.Close
ConnectionString.Close
Set RecordSet = Nothing
Set ConnectionString = Nothing
End Function
View 7 Replies
View Related
Jul 23, 2005
I may not be the best forum for this post, however I believe some onecan still help me or direct me somewhere else.I'm finding that win 2003 x64 and SQL 2005 CTP is slower than win 2003and SQL 2000.Machine A: Opteron 2.2 (248) w/ 2 cpus. 8GB memory. SCSI disk array.Windows Enterprise 2003 x64 final release. SQL Server 2005 enterpriseCTP.Machine B: Opeteron 2.2 (248) w/ 2 CPUs. 4GB Memory. IDE Drives.Windows Server 2003 (32bit) and SQL Server 2005 (standard).I'm using Cognos' DecisionStream as the ETL tool (32bit). I have theidentical job on both machines. Machine A is slower to do my nightlybuild (1h 20m) vs. Machine B (50m).I've done no tweaking of the databases. I Used SQL 2005's studio tocopy the database from Machine B to Machine A.The only major difference is the O/S and SQL, the machines are samespeed, however Machine A has twice the memory and faster disk; so Iwould expect it to be faster.Can anyone think of smoking guns I might be missing?TIA
View 2 Replies
View Related
Mar 19, 2006
I need to make a sync between 3 or more SQL Servers. We have 3 Small Business server with sql server 2000. In all the 3 locations, branch and headquarters we've the same databate data.
For sync with 2 there's no problem. I need to make it with three and then at the end of the year with four.
Can anyone help me?
Cheers
João Almeida
View 1 Replies
View Related
Jul 20, 2005
I am just beginning development of a new app and I need a little advice onthe best way to go about doing something.The app is a project management tool for a construction company. Users inthe field will need to do remote updates both receiving and submitting databack to the main office. I can't just make it a live web app because theusers will have to be able to work off line and sync data later (presumablywith a VPN connection).What is the best way to go about this? I planned on using MSDE 2000 w/Accessfront end. I will install MSDE on each laptop but what is the safest/mostreliable way to sync only that information which pertains to a specific useralong with other general information.Any books that helpful with this specific issue? Any one have reusablemodules/code they'd be willing to send me?TIA,--Jake
View 1 Replies
View Related
Mar 15, 2006
Hi all,
I have a module in power builder with Sybase database as its backend. The other modules related to the same application are running on Delphi with SQL server as backend.
My requirement is to sync between the Sybase database and SQL server (2000) in order to update the SQL server with all the transactions ( online ) done in the Sybase database.
Thanks in advance ,
Hari Haran Arulmozhi
View 2 Replies
View Related
Apr 15, 2008
Hello,
I have SQL Server 2000 and 2005 running on the same server. My current system is in SQL Server 2000 and the new system is in SQL Server 2005. My users will be using SQL Server 2000 for the most part, But for the part the processes that have been migrated to 2005, they will be using SQL Server 2005 as well. The database schema is different on both servers eventhough the data will be similar in most respects.
Is there is a way through which any data that is inserted/updated in SQL Server 2000 via content Management System/ manually/ via a batch job, the data is automatically populated in SQL Server 2005 tables or vice versa?
Please advice at the earliest.
Thanks.
View 1 Replies
View Related
Apr 3, 2008
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran
View 4 Replies
View Related
Jul 11, 2007
Hi,
I have a legacy sql 2000 database with numerous stored procedure and tables.
I need to find out the top 20 most used/accessed tables in the database
Any one know how i could do this type of trace with profiler?
View 3 Replies
View Related
Nov 17, 2006
It's me again guys. First let me say that I truly appreciate the knowledge that I see on this forum. Now on to my question.
How can I use SQL Server to import the active accounts from our Exchange Server? Thanks.
Everything I know I learned from the web.
View 7 Replies
View Related
Feb 20, 2003
hi,
we currently have a web server/db on-site and a similar backup machine across the country. we're using a pretty bad backup strategy. we zip up a backup file, thats done on the main server every night, then ftp over to the back up server then run a restore.
lately ive been having problems with the main server. i would like to have the machines sync'd up as close as possible.
ive searched the threads and noticed replication and log shipping to be the most practical, but im assuming most of the machines are on the same domain.
what would be my best bet for machines connected over the internet, no vpn?
also the db on the main machine get queried/inserts all day from 7am - 6:30pm
thoughts?
thx
View 1 Replies
View Related
Jan 17, 2008
I want to synchronize two databases. Is there a query or a tool to synchronize them?
View 3 Replies
View Related
May 10, 2007
Hi,
i am working with windows mobile Cf 2.0 and desktop. i got problem when i were trying to synd mobile database and ms-access database.
my requirement is online i want to transfar data records from mobile to desktop vice versa.
but how? i dont knwo any body would like to guide me.
i am ready to accepting yours valuable views.
waiting
bye
Rajat.
View 9 Replies
View Related
Dec 23, 2006
Hi
Scenario: In general user will take database backup from database server to local system. User perform some changes to his local database based on his requirement. Again user connects to database server and click on update, local database should update to server database by informing each record status to the user. ex: record 1 updated / call closed do you want to update?
Here local database is going to be Pocket pc database and server database is on SQLDatabase. Can any one suggest best way to implement this feature in Windows Pocket pc, c#. I would appreciate your reply.
Thanks,
View 2 Replies
View Related
Nov 3, 2004
I was wondering how exactly one can search the Active Directory with SQL Server 2000. There is all kind of stuff on the Internet about how to connect them and how useful it is to connect them together - plus how you can use Active Directory to query SQL Server, but I`ve never encountered any article where they explain how SQL Server can search the Active Directory.
I`m thinking about how one has their user-database in Active Directory with all users in groups, but only uses groups in SQL Server. How exactly can SQL Server figure out how a user belongs to a group?
Does Active Directory tell SQL Server about that when the user tries to access something from SQL Server, or does SQL Server already knows which group is accessing it as soon as the user authenticates in Active Directory?
View 7 Replies
View Related
Jul 20, 2005
Hello All,I have a linked ADSI Server to our company Active Directory andeverything is fine. I'm running queries and such using LDAP. BUT howcan I aquire a list of attributes for the classes and categories. Suchas if i wanted to see a user's telephone number and email address foruse in a corporate database? Is this possible?Thanks
View 4 Replies
View Related
Mar 19, 2008
Hi all,
just want to confirm this:
We have a department and want to grant them access to various databases on a sql server 2000 instance. Can we create an AD group for these users and just add the group as a login to SQL Server? Or do we have to create a db user for each member of the group and map the logins one by one?
Thanks
View 1 Replies
View Related
Feb 12, 2007
I have an active x script written in vb that just counts the records in a table and fails the step if there are not enough records. It is simple and effective. But when I transfered this task to my SSIS package I get a function not found error.
I am not familiar with active x or vb script so I have no idea what is wrong. I can do without while I build the package but I need it in the end to prevent possible problems....
Here is the script...
'**********************************************************************
' Visual Basic ActiveX Script
'************************************************************************
Function Main()
dim myConn
dim myRecordset
dim iRowCount
' instantiate the ADO objects
set myConn = CreateObject("ADODB.Connection")
set myRecordset = CreateObject("ADODB.Recordset")
' Init ADO Connection object
With myConn
.ConnectionString = "File Name=D:Data Linksmusic_load.udl;" 'Full path to the UDL
.Open
End With
mySQLCmdText = "Select 'totalcount' = Count(*) from fulltext"
myRecordset.Open mySQLCmdText, myConn
set Flds = myRecordset.Fields
set iRowCount = Flds("totalcount")
If iRowCount.Value < 1000000 then
' MsgBox "The number of products is: " & iRowCount.Value & ". The total number is wrong"
Main = DTSTaskExecResult_Failure
Else
' MsgBox "The number of products is: " & iRowCount.Value & ". The total number is good"
Main = DTSTaskExecResult_Success
End If
End Function
View 2 Replies
View Related
May 12, 2007
hi.
I have two database( one on local system and another on my host ) there are same in table and stored procedure. i just want to sync data between there in my application ( ...on button on click event ! ). please help me to do it. tnx
View 1 Replies
View Related
Oct 15, 2007
SQL Database Schema Sync
We have development and production databases, when we change database schema in development database how can I synchronize it to production without creating data problems in production, is this possible in SQL2005? Or any external tool I can use?
View 1 Replies
View Related
Mar 24, 2008
I'm working on an application that will be running on two or more machines. Each machine is logging data to a local SQL Compact database. I would like to make these two computers sync the data with eachother, but I am unsure what the best method is to transfer data between machines in a table format. I think XML would work well, but there may be something easier, so I thought I'd ask. Do I want to use sockets to do this, or is there another type of connection that would work better?
All PCs will know the IP addresses of their peers. I forsee each PC having a server thread that is listening all the time. Each PC also has a client that checks to see if it can connect to the server on the other side. It then requests certain data, which the server part sends. Does this sound right?
The rest of the app is in Visual Basic 2008 Express.
Thanks,
Lance
View 16 Replies
View Related
