Synchronization Error:The Buffer Pool Is Too Small Or There Are Too Many Open Cursors.

Mar 15, 2006

Hello:

I tried to synchronize the SQL 2000 database with the SQL mobile server on PDA with SQL server management studio from SQL 2005. I got the error as ��The buffer pool is too small or there are too many open cursors. HRESULT 0x80004005 (25101) �?. The SQL database file size is 120MB.

I create the .sdf file on PDA with the following C# code:

string connString = "Data Source='Test.sdf'; max database size = 400; max buffer size = 10000;";
SqlCeEngine engine = new SqlCeEngine(connString);
engine.CreateDatabase();

I think the 400MB max database size and 10000KB max buffer size are big enough to hold that SQL database data and I have already successfully synchronized my PDA with another smaller SQL server database file. I have been kept trying and searching this for couple of days and still can not figure it out.

Moreover, the synchronization always stops at the same table.

Please help and a lot of thanks in advance.

View 1 Replies

SQL 2005 Mobile Edition Error: The Buffer Pool Is Too Small Or There Are Too Many Open Cursors.

Feb 2, 2006

I am working with merge replication. The db server is running Windows 2003 Server Std x64 with SQL 2005 Std x64. The IIS server is running Windows 2003 Server Stx x86. The clients are Windows Mobile 5.0 running SQL 2005 Mobile.

I have previously been able to get the test client to initialize a subscription to the publication. I made some changes recently and added about 7 tables, bringing the total articles to 104. Some of the articles have unpublished columns, which means they are using vertical filtering as well. This publication is also using parameterized filters. During publication creation, there are several warnings that "Warning: column 'rowguid' already exists in the vertical partition".

The snapshot agent runs without any errors. When the client attempts to initialize, I get the error "The buffer pool is too small or there are too many open cursors."

My question is 2 part. First, what is causing this error, and second, how can it be resolved?

View 1 Replies View Related

SQL 2012 :: Backups And Buffer Pool

Jan 23, 2015

I am sure I have seen in the past in a monitoring tool that PLE drops off to 0 whenever we do a backup. I was doing some reading around this however and found something that said backups use a different portion of memory external to the buffer pool (minmax settings).

Is this correct and how can I tell how much memory will be required for a backup?

View 2 Replies View Related

Tyring To Figure Out What's In The Buffer Pool

Apr 16, 2007

Hi, I'm trying to chase down some bottlenecks, and am currently tyring to figure out what's actually in our data buffer pool.

We've recently upgraded to SQL Server 2005 (sp2a); there's 4GB memory on the box (an active/passive cluster) with the /3GB switch set. I'm working on the learning curve for

sys.dm_os_buffer_descriptors and sys.allocation_units [and boy I sure wish SSMS's query windows wouldn't "copy" in HTML]. Based on BOL and some poking around, I've come up with the following query to list pages used within a given database:

SELECT

count(*) cached_pages_count

,isnull(obj.name, '<unidentified object>') TableName

,obj.index_id

,ind.name

from sys.dm_os_buffer_descriptors bd

left outer join (select

object_name(object_id) name

,object_id

,index_id

,allocation_unit_id

from sys.allocation_units au

inner join sys.partitions p

on au.container_id = p.partition_id -- 2005 compatible, but maybe not in future versions

) obj

on bd.allocation_unit_id = obj.allocation_unit_id

left outer join sys.indexes ind

on ind.object_id = obj.object_id

and ind.index_id = obj.index_id

where bd.database_id = db_id()

group by obj.name, obj.object_id, obj.index_id, ind.name

order by cached_pages_count desc

This would appear to list how many pages are sitting in our buffer pool for which objects for the currently selected database. The thing is, for our "main" database, the vast majority of pages fall in that "unidentified" bucket -- their allocation_unit_ids are not in sys.allocation_units (or tempdb, I checked there just in case).

My question is: what are these pages? Where is this data coming from? Might these somehow be related with our execution/query cache, which appears to be larger than our data cache?

As may be obvious, this is all new to me, and any help would be greatly appreciated!

t

View 1 Replies View Related

Will Buffer Pool Extensions Have Benefit If Already On SSDs?

Sep 24, 2015

I am reading about Buffer Pool Extensions, and how it stores data pages on media like an SSD, to speed up retrieval in future. Would this be useless if my mdf files are already on SSD media? At most, I envisage it meaning that instead of grabbing the data from the mdf, it would grab the data from the buffer pool extension drive, but if they are both on SSD's, I'm not sure of how much return I would see.

Has any user decided to use BPE when their data is already on SSD's, and have they noticed any improvement in these cases?

View 1 Replies View Related

DB Engine :: Buffer Pool Extensions On Shared SSD

Oct 9, 2015

Extending the buffer pool onto an SSD drive that is shared ? For instance, if we had a mirrored system drive(The C logical partition) on SSD's, can we use the remaining space on that mirrored partition to extend my SQL 2014 buffer pool ? I understand that in this scenario, there is some competition for the I/O throughput between SQL Server's extended buffer pool and the OS. We intend to have the pagefile on a different disk, other than this specific SSD.

View 11 Replies View Related

SQL Server Admin 2014 :: Buffer Pool Extensions On Shared SSD?

Oct 8, 2015

extending the buffer pool onto an SSD drive that is shared ? For instance, if we had a mirrored system drive(The C logical partition) on SSD's, can we use the remaining space on that mirrored partition to extend my SQL 2014 buffer pool ? I understand that in this scenario, there is some competition for the I/O throughput between SQL Server's extended buffer pool and the OS. We intend to have the pagefile on a different disk, other than this specific SSD.

View 1 Replies View Related

SQL Server 2008 :: Identify Size Of Data Cache Allocated From Buffer Pool

Oct 20, 2011

How do i check the size of the datacache allocated from the buffer pool by sql server?

DMV or anything to show me the pool allocation sizes for the various pools in sql server i think i may be able to work from there.

View 9 Replies View Related

SSDT Error - Size Necessary To Buffer XML Content Exceeded Buffer Quota

Apr 18, 2012

I encountered the following error while attempting to preview an RDL report I was developing in VS2010 using SSDT:"The size necessary to buffer the XML content exceeded the buffer quota"

View 3 Replies View Related

Error: The Buffer Manager Failed To Create A New Buffer Type

Apr 28, 2006

Hi

I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.

There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".

SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).

I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.

Does any one have any idea what happened?

TIA . . . Ed

View 2 Replies View Related

Synchronization Of Business Contacts In Outlook With Small Business Accounting

Jun 10, 2006

Can anyone take me through synchronization of contacts within Business Contacts Outlook into Microsoft Small Business Accounts?

I run a stand alone PC with NO network. When SBA came SQL was also installed. Apparently you can synchronise Contacts within Business Contacts with SBA but both SBA & Outlook should work through the same SQL server.

Has anyone tried this?

Can someone walk me through the process?

Thanks

Debbie

View 1 Replies View Related

Cannot Allocate More Connection.connect Pool Is At Maximum Increase Max Pool Size

Feb 21, 2007

hi i'm having this error on my application"cannot allocate more connection.connect pool is at maximum increase max pool size" the proble is when i do testing this error does not apply it only Appears when the application is been used by many people
How can I resolve this?
Thanks

View 1 Replies View Related

Timeout Expired. The Timeout Period Elapsed Prior To Obtaining A Connection From The Pool. This May Have Occurred Because All Pooled Connections Were In Use And Max Pool Size Was Reached.

Feb 11, 2004

What does this error message imply?

View 3 Replies View Related

Getting A Pool Timeout Error

Sep 8, 2007

I have pages which are using a master page.
An example page on my site would be the homepage, it makes 3 connections to mssql.
1) Get the keywords of the page
2) Get a list of news articles
3) Get the content of the page.
When I visual web express to debug the site it's giving me a pool error message, neither can I get the site to load directly via IIS. It says theres been a pool timeout.
I've read on the internet about making sure connections are closed when you are finished and I've checked that all database connections are closed using
finally{conn.Close();}
does anyone have any idea why I would be having this problem?
How can I see what connections the site is opening, or maybe theres a limit on my server?
I'm using my own test server running windows 2003 and IIS

View 6 Replies View Related

How To I Enter A Small Square Or A Small Circle In A NVARCHAR Field?

Dec 25, 2006

I want to store a small cirle in a text field. Can anyone tell me how I can enter it in ascii code.

Thanks

View 4 Replies View Related

Reporting Services :: Size Necessary To Buffer XML Content Exceeded Buffer Quota

Oct 7, 2015

We have a set of reports with same header section in all the reports. So while developing a new report i used to copy that header section to the new report with same dataset names (without any change) , but while rendering the report it is throwing error " The size necessary to buffer the XML content exceeded the buffer quota".

View 2 Replies View Related

Error: Value Does Not Fall Within The Expected Range. Error In Buffer.DirectRow Method

Oct 10, 2006

Hi

I am trying to make a custom task. The custom task has one input, which i map to externalmetadata column in the task and one output.

When i run the task it fails with this error ( I am putting the whole SSIS message)

SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, Lib [2387]: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectRow(Int32 hRow, Int32 lOutputID)
at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectRow(Int32 outputID)
at Lib1.LibPM.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Lib" (2387) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x80070057.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (1855)" wrote 0 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
----------------------------

This is my piece of code which is trying to put the data in the output buffer (ProcessInput function).

int GoodOutputId = -1;

IDTSInput90 inp = ComponentMetaData.InputCollection.GetObjectByID(inputID);

//GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex);

GoodOutputId = ComponentMetaData.OutputCollection[0].ID;
System.Console.Write("Here i am");
System.Console.Write(GoodOutputId);
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
if (_inputColumnInfos.Length == 0)
{
buffer.DirectRow(GoodOutputId);
}
else
{
buffer.DirectRow(GoodOutputId);
}
}
}

I have put any code in the else part as i am just trying to run the task as of now and later put the functionality in it.

Please let me know if i have missed something. Thanks in advance.

Vipul

View 1 Replies View Related

Warning - Kept Reference To Buffer - What Can Be Done About These Buffer Warnings?

Mar 6, 2008

Good day everyone,

I'm experiencing a completely random warning from any given row count component within any given data flow task. It occurs sporadically. Whilst distracting, I don't see any adverse effects to the data after the packages complete. Can someone weigh in on this warning and let me know if it is indeed benign or what I maybe able to do to fix it?

Here's the warning:

"A call to the ProcessInput method for input 75997 on component "CNT Rows sent for STG table" (75995) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned."

Thanks,

Langston

View 4 Replies View Related

Error: The Size Specified For The Link Is Too Small

May 29, 2008

Hi All!

I've got some data in a table called Dim.Sources that I generated by a program to generate data, so the characters are wierd, but it is in the database.

When I process the dimension, I get an error like: the size specified for the link is too small, and it will truncate one or more values of the column...

It is only for the name column, but not for the id column (I guess because in this column there are only numbers).

I'm getting nuts! please, any help will be much appreciated! No way to find any information on the internet about it!

I don't remember defining any link size!! Where can I change it?? What is it??? : )

Thank you all in advance!

View 1 Replies View Related

Buffer Error !! NEED HELP FROM SQL GURU

Nov 20, 2000

Upon running DTS manually to transfer data from Excel into SQL Server, I
get the error:

-----------------------------ERROR OUPTUT ------------------------------------
Error at Source for Row number 264. Errors encountered so far in this task: 1. General error -2147217887 (80040E21).
Data for source column 3 ('Value') is too large for the specified buffer size.
---------------------------END ERROR OUTPUT----------------------------------

*** 'Value' is varchar(4000); largest having length of 1000.
*** The network packet size is 4096.

?? AM I SUPPOSED TO CHANGE THE BUFFER SIZE??

Your kind help is greatly appreciated
Thanks
Ziggy

View 2 Replies View Related

Buffer Size Not Specified Error

Jul 13, 2006

Error: "The specified buffer size is not valid. [buffer size specified = 0]

Hello, im very new to SQL 2005 everywhere but looked like it could do the job for what i needed:

Im working on a c# (.net 2.0) project and loaded data

(one column from one table, 800 rows, text, no greater than 80characters in length)

from an access db into a data set, then lnserted the data in SQLce, great it works fab!

but as soon as I select another field(text, <=10) from the access db, and try to insert it into sql i get the error...

what have i missed???

View 3 Replies View Related

Error With Web Synchronization

Sep 14, 2006

Hello,

We have SQL2k5 SP1 as our database server. We have another box running IIS for web synchronization. We are seeing a lot of errors on the client side stating that they are unable to connect to the distributor. When we look at the event log on the IIS box we find application errors with the replisapi.dll. Below is a dump from the event log of the IIS box. Both boxes are 2003 with the currect patches and each have 4 GB RAM. Any help would be appreciated.

John
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 9/12/2006
Time: 8:12:48 PM
User: N/A
Computer: SERVER-IIS5
Description:
Faulting application w3wp.exe, version 6.0.3790.1830, faulting module replisapi.dll, version 2005.90.1399.0, fault address 0x0002bd67.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 77 33 77 ure w3w
0018: 70 2e 65 78 65 20 36 2e p.exe 6.
0020: 30 2e 33 37 39 30 2e 31 0.3790.1
0028: 38 33 30 20 69 6e 20 72 830 in r
0030: 65 70 6c 69 73 61 70 69 eplisapi
0038: 2e 64 6c 6c 20 32 30 30 .dll 200
0040: 35 2e 39 30 2e 31 33 39 5.90.139
0048: 39 2e 30 20 61 74 20 6f 9.0 at o
0050: 66 66 73 65 74 20 30 30 ffset 00
0058: 30 32 62 64 36 37 02bd67

View 4 Replies View Related

Synchronization Error

Mar 20, 2006

Hey everyone,

I have a SQL Server 2000 Publisher and a SQL Mobile 2005 Subscriber. I had to reinitialize the publication because it was set to expire and I changed it to never expire.

When I try to synchronize it through SQL Management Studio, I get the following error:

TITLE: Microsoft SQL Server Management Studio
------------------------------

The database file is larger than the configured maximum database size. This setting takes effect on the first concurrent database connection only. [ Required Max Database Size (in MB; 0 if unknown) = 129 ]
HRESULT 0x80004005 (25104)

------------------------------
BUTTONS:

OK
------------------------------

I can't find anything on MSDN. Any suggestions?

Thanks,

Lee

View 4 Replies View Related

Windows Synchronization Manager And Subscriber Web Synchronization

Dec 7, 2005

Hi,

View 5 Replies View Related

Waiting For Buffer Latch Error

Jul 20, 2005

Does anybody know what might cause the following message to show up inthe SQL Server Error Log?:Time out occurred while waiting for buffer latch type 2, bp0x12260f80, page (5:77914), stat 0x40d, object ID 7:421576540:0,waittime 500. Continuing to wait.I've read several articles about what to do about this situation onSQL Server 2000, but I'm running SQL Server 7.0. Specifically, I'mrunning version 7.00.842. Is there a way to resolve this problemwithout upgrading to some flavor of SQL Server 2000?

View 2 Replies View Related

Error On Web Synchronization Wizard

Jan 28, 2007

Got the following error on the last part of the wizard, after setting all the requirements:

Setting the snapshot share permissions (Error)

Messages

The operation completed successfully. (Exception from HRESULT: 0x80070000) (mscorlib)

View 4 Replies View Related

Out Of Memory Error (bUFFER SWAPPING )- SSIS

Feb 27, 2007

HI ,

Need some quick fix Help

I have been
trying to load data from AS400 to DB2 (windows) using ADO.NET connection in
Data reader source and OLEDB Destination (IBM Oledb provider )

The files, I��m trying to load, have
number of rows more then 15 million.

On execution of the package I get
Out of Memory Error (see below)

My Destination Box is 4GB+ RAM and 4
CPU Box.

There seems to be some Buffer and
Swapping related issue which I��m not able to figure out. It says that System is
unable to allocate memory

Please help me on the same.

Thanks in Advance

Amit S

SSIS package "ABCDE
1.dtsx" starting.

Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at ABCDE
2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at ABCDE
2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at ABCDE
2003 to 2004, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0202009 at ABCDE
2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error
code: 0x8007000E.

An OLE DB record is available.
Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description:
"Out of memory.".

Error: 0xC0047022
at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component
"OLE DB Destination" (12) failed with error code 0xC0202009. The
identified component returned an error from the ProcessInput method. The error
is specific to the component, but the error is fatal and will cause the Data
Flow task to stop running.

Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with
error code 0xC0202009.

Error: 0xC02090F5
at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.

Error: 0xC0047038 at ABCDE
2003 to 2004, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.

Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with
error code 0xC0047038.

Information: 0x40043008 at ABCDE
2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at ABCDE
2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at ABCDE
2003 to 2004, DTS.Pipeline: "component "OLE DB Destination"
(12)" wrote 289188 rows.

Task failed: ABCDE 2003 to
2004

Warning: 0x80019002 at ABCDE
1: The Execution method succeeded, but the number of errors raised (6) reached
the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.

Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
2.dtsx

Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.

Information:
0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed
a memory allocation call for 10484320 bytes, but was unable to swap out any
buffers to relieve memory pressure. 3 buffers were considered and 3 were
locked. Either not enough memory is available to the pipeline because not
enough are installed, other processes were using it, or too many buffers are
locked.

Error: 0xC0047012
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating
10484320 bytes.

Error: 0xC0047011
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory
load. There are 4294660096 bytes of physical memory with 1548783616 bytes free.
There are 2147352576 bytes of virtual memory with 227577856 bytes free. The
paging file has 6268805120 bytes with 3607072768 bytes free.

Error: 0xC02090F5 at ABCDE
2005_04 to 2005_11, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.

Error: 0xC0047038 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.

Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited
with error code 0xC0047038.

Error: 0xC0047039 at ABCDE 2005_04
to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown
signal and is terminating. The user requested a shutdown, or an error in
another thread is causing the pipeline to shutdown.

Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited
with error code 0xC0047039.

Information: 0x40043008 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at ABCDE
2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB
Destination" (12)" wrote 0 rows.

Task failed: ABCDE 2005_04 to
2005_11

Warning: 0x80019002 at ABCDE:
The Execution method succeeded, but the number of errors raised (7) reached the
maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.

Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
3.dtsx

Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.

��.

��

View 11 Replies View Related

Memory Fills Up Then A Buffer Error Is Generated.

Jun 22, 2007

I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.

The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.

Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:

The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.

This message is followed by a bunch of other messages:

SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.

SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.

SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.

...

SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.

I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.

Nothing works. The package fails everytime within 20 minutes of its start.

I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.

Any ideas would be greatly appreciated.

Thanks.

-Scott

View 5 Replies View Related

Temp Buffer Error Allocating ######## Bytes

Jan 11, 2008

Hi Guys,
i've found many threds with SSIS buffer errors but non of them seems to work, or have a good solution. i'l explain the story short.

i've got a DB server running on Windows 2003 R2 Enterprise with 10GB RAM 20GB Virtual memory with same spec another machine for the web server.

both machines have "Lock Memory in memory" group policy enabled for

Network Service
System
DomainSQLServiceAccount (in DB server)
and in the DB memory "awe allocation" is also enabled.
both servers have /PAE /3GB switches enabled in boot.ini file

problem: i run all my SSIS packages in the web server through IIS. so the processes are devided between DB and web server. i.e SSIS service is also running in web server.

when i run packages under load (transforming - 200,000 records) i get buffer allocation errors.

A buffer failed while allocating 10485760 bytes.
Error Code = -1073450990
all packages i run i have set the default buffer temp to my web servers e: emp (got 260GB space left). and defaultbuffer size is 10mb with 10,000 defaultbuffermaxrows.

funny this is when it hit 8.33GB (approx 875 files) i get the above error message. it always seems to give me errors after 8.33GB.

Note: all packages run in IIS (w3wp.exe). i'm configuring my new production boxes. the old production with similar envirnment (less speed) work with the same data and packages fine under load.

new production machine got more memory than the old machine but i get memory error (buffer). it doesn't even use up all available physical memory, only about 3gb (max), then start buffering to disk.

any help would be greately appreciated.

i also got

The system reports 31 percent memory load. There are 10734981120 bytes of physical memory with 7326126080 bytes free. There are 3221094400 bytes of virtual memory with 283840512 bytes free. The paging file has 12661686272 bytes with 9633767424 bytes free.Error Code = -1073450991
this was before i increased virtual memory to 20gb(from 4gb).

Any ideas i can try out?

View 4 Replies View Related

ODBC, SQL Server, FOR XML && Cursors Error

Oct 14, 2004

Hi,

Has anybody had any luck using the Microsoft SQLServer ODBC drivers (Driver version: 03.81.9030, ODBC version : 03.52)

to connect to a SQL Server 2000 database and passing in a SELECT with a FOR XML clause. I keep

getting Error [Microsoft][ODBC SQL Server Driver][SQL Server]The FOR XML clause is not allowed in a CURSOR statement

., State: 42000, Error: 6819.

Is there a work around (eg putting the select in a stored procedure) or am I missing something ?

I am using SQLExecDirect() to execute the statement.

Or could any one suggest a better way to retrieve data from a standard table in XML formated string?

Please Help!!

View 1 Replies View Related

Error Handling W/o Using Cursors In SQL Server 2K

Jan 13, 2008

Hi,

I've the following program structure:

For every record
-- insert into table1
-- insert into table2
....

if I encounter an error in the table1 insert, is there any way (other than using cursors) to continue processing the next record?

Thanks for your help.

Subha Fernando

View 11 Replies View Related

Error On Configure Web Synchronization Wizard

Jan 29, 2007

View 4 Replies View Related

SQL Error: 16931 (There Are No Rows In The Current Fetch Buffer)

Sep 15, 2007

Hi,

I am having problem with the CRecorset::Update() function.
I have declared a CRecordset object in client Application in VC++6.0.
I open the recordset in dynamic mode.
Before opening the recordset , I have obtained the UPDLOCK on the base table.( Obviously this UPDLOCK is in transaction).
When I try to call CRecordset::Update() it gives me exception 16931(There are no rows in the current fetch buffer).
I have define a clustered index on this table.
But I still get the exception 16931 on calling CRecorset::Update().

Any help is much appreciated.
Thanks in advance.

View 2 Replies View Related