Hi!
I recently installed the Technical Refresh for SPS v2. Now I keep getting an error in the application log that says " Synchronization exception occurred" . This occurs every 30 seconds since the technical refresh install.
Has anybody been in this situation and actually resolved it?
Thnaks, Kumsi
Hi,
I am getting below error in the event Log after followed by a Event saying Database stopped. Can anybody tell me the resolution for this error.
Below is the system info
1. Microsoft Windows Server 2003 Enterprise Edition Service Pack 2
2. .Net Framework 2.0
Event Type: Warning
Event Source: ASP.NET 2.0.50727.0
Event Category: Web Event
Event ID: 1309
Date: 3/28/2008
Time: 1:55:46 AM
User: N/A
Computer: HostMachine
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/28/2008 1:55:46 AM
Event time (UTC): 3/28/2008 8:55:46 AM
Event ID: 6651c52c0a7a45c2bcc904514bab99f2
Event sequence: 68
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/root/Reports-1-128511680648122031
Trust level: RosettaMgr
Application Virtual Path: /Reports
Application Path: D:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportManager
Machine name: HostMachine
Process information:
Process ID: 2096
Process name: w3wp.exe
Account name: NT AUTHORITYNETWORK SERVICE
Exception information:
Exception type: ReportServerException
Exception message: Execution 'aogqmz45z4at1q3oui2elc55' cannot be found (rsExecutionNotFound)
Request information:
Request URL: http://ViewReports/Reports/Reserved.ReportViewerWebControl.axd?ReportSession=aogqmz45z4at1q3oui2elc55&ControlID=1ff944bddbce45f9860fdf44300bf3bf&Culture=1033&UICulture=9&ReportStack=1&OpType=SessionKeepAlive&TimerMethod=KeepAliveMethodctl141TouchSession0&CacheSeed=Fri Mar 28 01:39:34 2008
Request path: /Reports/Reserved.ReportViewerWebControl.axd
User host address: 172.19.97.233
User: Valid User
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITYNETWORK SERVICE
Thread information:
Thread ID: 15
Thread account name: NT AUTHORITYNETWORK SERVICE
Is impersonating: True
Stack trace: at Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo()
at Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId, Boolean fullReportLoad)
at Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters, Boolean fullReportLoad)
at Microsoft.Reporting.WebForms.ReportDataOperation..ctor()
at Microsoft.Reporting.WebForms.HttpHandler.GetHandler(String operationType)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Custom event details:
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Aditya
32 Bit Vista RTM - Patch Level up todate. - Desktop
SQL CE V3.5
VS2008 - RTM
I have a really strange problem where I am receiving a ""An overflow occurred while converting to datetime Exception."
I have an existing database where I am making a copy of an old row, and updatting date/time fields. The old fields were filled with date/time and the columns are datetime columns.
Private Function CopyChildRowsDST(ByVal SearchID As Guid, ByVal CurrentParentID As Guid, _
ByVal dsttbl As DataTable) As Boolean
Dim Rows() As DataRow = Ds.Tables("SrcTbl").Rows.Find(SearchID).GetChildRows(ChildrenRel)
Dim NewEntityId As Guid
For Each Row As DataRow In Rows
NewEntityId = Guid.NewGuid
Row(MDTbl.cgParentID) = CurrentParentID
Select Case Row(MDTbl.csRecordType)
Case RecordTypes.Directory
CopyChildRowsDST(Row(MDTbl.cgEntityID), NewEntityId, dsttbl)
Case RecordTypes.Topic
' Increment reference count and ticks of data
Qury.IncrementReferenceCount(Row(MDTbl.cgDataID), _
ReferenceCount.Increment, Tables.DocumentTable)
End Select
Dim Rw As DataRow = dsttbl.NewRow : Rw.ItemArray = Row.ItemArray
Rw(MDTbl.cgEntityID) = NewEntityId
' Rw(MDTbl.cdtDateCreated) = Curtime
'Rw(MDTbl.cdtDateModified) = Curtime
dsttbl.Rows.Add(Rw)
Next
End Function
After executing this code..... I do ...
Public Function PersistTable(ByVal Table As DataTable) As Boolean
' SqlCe.PersistTable - called by any routine needing to make
€˜permanent changes in a table.
' Usually this would be midlevel procedures in IOSUBS
Con.Open() : Dim Status As Boolean
Using Adapter = New SqlCeDataAdapter("Select * from " &
Table.TableName & " ;", Con)
Adapter.UpdateCommand = New SqlCeCommand("Update " &
Table.TableName & " ;", Con)
Dim builder As New SqlCeCommandBuilder(Adapter)
With builder : .QuotePrefix = "[" : .QuoteSuffix = "]" : End With
Try
Adapter.Update(Table) : Status = True
Catch e As SqlCeException
Con.Close()
MsgBox("Error persisting Table: " + Table.TableName + vbCrLf
+ "Exception was: " + e.Message, _
MsgBoxStyle.Information,"ADONET.PersistTable")
Return False
Finally
Con.Close()
End Try
Return Status
End Using
End Function
If I include the two redlines of code, I recieve a time overflow exception WHEN UPDATING THE TABLE. Those database fields are datetime fields and the orginal rows have datetimes in them.
Does anyone understand what is happening?
Thank you.
I am getting SQLException when I connect SQL Server 2005. I would like to know how to correct this problem.
I get this error randomly. Never seenit before. Sometimes I get this error one day later from application begins, sometimes two days later, sometimes 3 day later.
DBCP borrowObject failed: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
org.apache.commons.dbcp.DbcpException: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:85)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:184)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(Unknown Source)
at org.apache.commons.dbcp.AbandonedObjectPool.borrowObject(AbandonedObjectPool.java:117)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:110)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:312)
at org.apache.struts.util.GenericDataSource.getConnection(GenericDataSource.java:276)
at com.y.util.DbAccess.getConnection(DbAccess.java:29)
at com.y.biz.UserMgr.leftDays(UserMgr.java:404)
at com.y.action.LoginAction.login(LoginAction.java:194)
at sun.reflect.GeneratedMethodAccessor303.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:220)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.sendCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.changeSettings(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:83)
... 44 more
Web Server:
CPU 2*1.66G, 4GB ram, 146GB
Windows 2003 Server
JDK 1.4.2
Tomcat 5.0
Driver Name: Microsoft SQL Server 2005 JDBC Driver
JDBC Driver Version 1.0
Use struts connection pool in application.
Database Server:
CPU 2*1.66G, 4GB ram, 4 x 146GB
Windows 2003 Server
SQL Server 2005, Product Version: 9.00.1399
I'm getting this error:
System.Data.SqlClient.SqlException: A floating point exception occurred in the
user process. Current transaction is canceled. at
System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping
tableMapping) at ...etc etc
when updating one particular table, but not when updating another using nearly the same code.
I've searched and searched on the inet, but with no joy.
Microsoft have several different manifestations of it, under various
different circumstances, but the solutions all seem to involve
installing SP4, which by the looks of it is a massive procedure that
you have to go to university to be competent to do.
In any case, according to Enterprise Manager, I already have SP4
included. On the other hand, the one file of mine I checked the date of
against MS's hotfix file list was 2002 not 2003, so who knows?
My Service Manager is v 8.00.760, and it's the Development Edition (ie it's all running on the one machine).
According to the info on sqlDataAdaptor.update, the
sqlError that gets returned as part of the sqlException contains
fields Class, which gives the seriousness of the error, and State,
which identifies the exact error. I get Class=16 (user-fixable)
and State=1, which we have to go to SQL Books Online to discover the
meaning of. SQL BO probably sounded like a good idea to W.Gates,
but it took me half an hour to get anywhere near finding out what that
'1' meant. When I did, it was (guess): 'A floating point
exception occurred in the user process. Current transaction is
canceled.' !!!
Can anyone please tell me what exactly might be causing the error?
Graham Rounce
sql server 2000 sp4 build 2184runs stats with maintenance plansp_msforeachtablestored procedure updating full stats for each table and the resultsare identicalA floating point exception occurred in the user process. Currenttransaction is canceled.all pointers are to move to latest service packAny pointers on how to avoid this errorThanks for your timeMassa
View 6 Replies View Related
can somebody advice me on this error.
An Unhandled win32 exception occurred in DtsDebugHost.exe[3172]
Thanks a lot
I am trying to run "select * from <table> where <columnname> = 0.0" inquery analyzer<columnname> is a floatI get the following error:Server: Msg 3628, Level 16, State 1, Line 1A floating point exception occurred in the user process. Currenttransaction is canceled.I get the same error when I use the float <columnname> through anapplicationI have tried upgrading to SP4, without any luck - still get the errormessage.Any help would indeed be appreciated.Thanks -AH
View 1 Replies View RelatedISSUE: While synchronizing data between the PDA and MS SQL Server database, using Active Sync connection, the sync process fails at times and displays an empty error message box and occasionally it shows the following exception: Error During Synchronization: A native exception occurred. ExceptionCode:0xc0000005 ExceptionAddress:0x01627b28 Reading: 0x1e000000 OK to terminate CANCEL to debug Moreover the .SDF file on the PDA gets corrupted. The ActiveSync connection drops as soon as the sync process fails. Later when the .SDF file is deleted and restored the synchronization is successful. Note: The replication monitor in the SQL Server indicates that the synchronization was successful even when the above error occurs.
View 3 Replies View RelatedHi,I'm running SQL Server Version 8.00.194 on Windows 2000.I am am running this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere ReutersSymbol = 'IBM.N'and TheoVolImplied > 0.0TheoVolImplied is of type float, precision 15, length 8.When I run this query I get this error:Server: Msg 3628, Level 16, State 1, Line 1A floating point exception occurred in the user process. Currenttransaction is canceled.If I run this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere TheoVolImplied > 0.0It works fine with no problems.If I run this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere ReutersSymbol = 'IBM.N'It works fine with no problems.Anyone have any ideas about what might be wrong?
View 2 Replies View RelatedWhile making a connection to a SQL server Enterprise Database using ASP.Net(C#), during execution of .aspx file i got the following error :-
Kindly help me if anybody knows the solution .
Thanks in advance
Login failed for user 'IT-CELLIWAM_IT-SERVER'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'IT-CELLIWAM_IT-SERVER'.
Source Error:
Line 52: //mycommand.SelectCommand.CommandType=CommandType.StoredProcedure;
Line 53: DataSet ds=new DataSet();
Line 54: mycommand.Fill(ds);
Line 55: DataTable dt;
Line 56: dt=new DataTable();
Source File: c:inetpubwwwrootetapplogin.aspx.cs Line: 54
Stack Trace:
[SqlException: Login failed for user 'IT-CELLIWAM_IT-SERVER'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +484
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372
System.Data.SqlClient.SqlConnection.Open() +384
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +44
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +38
netapp.login.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootetapplogin.aspx.cs:54
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
Hi,
I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer.
plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll"
Thanks !SqlConnection conn = new SqlConnection(DbConnectionString);
conn.Open();
SqlCommand cmd = conn.CreateCommand();
cmd.CommandText = "dbo.rqryTradesPRR";
cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ;
SqlDataReader reader = cmd.ExecuteReader();
while(reader.Read())
{
// have written something here
}
Thanks in advance !
Greetings everyone, I am attempting to build my first application using Microsofts Sql databases. It is a Windows Mobile application so I am using Sql Server Compact 3.5 with Visual Studio 2008 Beta 2. When I try and insert a new row into one of my tables, the app throws the error message shown in the title of this topic.
'((System.Exception)($exception)).Message' threw an exception of type 'System.NotSupportedException'
My table has 4 columns (i have since changed my FavoriteAccount datatype from bit to Integer)
http://i85.photobucket.com/albums/k71/Scionwest/table.jpg
Account type will either be "Checking" or "Savings" when a new row is added, the user will select what they want from a combo box.
Next is a snap shot of my startup form.
http://i85.photobucket.com/albums/k71/Scionwest/form.jpg
Where it says "Favorite Account: None" in the top panel, I am using a link label. When a user clicks "None" it will go to a account creation wizard, and set the first account as it's primary/favorite. As more accounts are added the user can select which will be his/her primary/favorite. For now I am just creating a sample account when the label is clicked in an attempt to get something working. Below is the code used.
private void lnkFavoriteAccount_Click(object sender, EventArgs e)
{
FinancesDataSet.BankAccountRow account = this.financesDataSet.BankAccount.NewBankAccountRow();
account.Name = "MyBank Checking Account";
account.AccountType = "Checking";
account.Balance = Convert.ToDecimal("15.03");
account.FavoriteAccount = 1;//datatype is an integer, I have changed it since I took the screenshot.
financesDataSet.BankAccount.Rows.Add(account);
//The next three lines where added while I was trying to get this to work.
//I don't know if I really need them or not, I receive the error regardless if these are here or not.
this.bankAccountTableAdapter1.Update(financesDataSet);
this.financesDataSet.AcceptChanges();
refreshDatabase();
}
the refreshDatabase() code is here:
private void refreshDatabase()
{
this.bankAccountTableAdapter1.Fill(this.financesDataSet.BankAccount);
//Aquire a count of accounts the user has
int numAccounts = financesDataSet.BankAccount.Count;
//Loop through each account and see which one is the primary.
for (int num = 0; num != numAccounts; num++)
{
//Works ok in frmMain_Load, but when my lnkFavoriteAccount_click calls this, it throws the error.
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
{
//Display the primary account on our home page. User can click the link label & be taken to their account register.
this.lnkFavoriteAccount.Text = this.financesDataSet.BankAccount[num].Name.ToString();
this.lnkFavoriteFunds.Text = this.financesDataSet.BankAccount[num].Balance.ToString();
break;
}
}
}
and my form_load code
private void frmMain_Load(object sender, EventArgs e)
{
refreshDatabase();
}
So, when I click on the lnkFavoriteAccount label, and my new row gets added, the app stops at the following line in my DataSet.Designer
[global:ystem.Diagnostics.DebuggerNonUserCodeAttribute()]
public byte FavoriteAccount {
get {
try {
return ((byte)(this[this.tableBankAccount.FavoriteAccountColumn]));
}
catch (global:ystem.InvalidCastException e) {
//Stops at the following line, this error was caused by 'if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)'
throw new global:ystem.Data.StrongTypingException("The value for column 'FavoriteAccount' in table 'BankAccount' is DBNull.", e);
}
}
set {
this[this.tableBankAccount.FavoriteAccountColumn] = value;
}
}
I have no idea what I am doing wrong, all of the code I used I retreived from Microsofts help documentation included with VS2008. I have tried used my TableAdapter.Insert() method and it still failed when it got to
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
in my refreshDatabase() method it still failed.
When I look, the data has been added into the database, it's just when I try to retreive it now, it bails on me. Am I retreiving the information wrong?
Thanks for any help you guys can offer.
Johnathon
Hi,
View 5 Replies View RelatedHello everybody,
There is some strange behaviour i've recently noticed while watching synchronization progress in Replication Monitor on SQL 2005 Server Standard with merge replication configured. The merge process seems to repeat several times.
This is the initial synchronizaion (reinitalization at the subsciber). Client is using Microsoft.SQLServer.Replication objects from .net framework assemblies.
The synchronization starts normally (status is "Running"). The last message of selected session box shows (among other messages): "Beginning evaluating partial replication filters" then "Finished evaluating partial replication filters" and finally "Merge completed after processing xxx changes... etc." after a few seconds. Status changes to "Completed" and then... the merge process starts again!! "Beginning evaluating partial replication filters" etc. And this repeats about 15-20 times.
And so whole process takes about 15 minutes instead about 45 seconds to complete initial synchronization. The number of changes is "Merge completed after processing ..." never change since the first such message.
Is this some bug in web synchronization or some invalid configuration setting? Why does merge process repeat itself so many times??
Please help, thanks in advance.
Kuba
Hi,
I got an strange problem with one of my packages.
When running the package in VisualStudio it runs properly, but if I let this package run as part of an SQL-Server Agent job, I got the message "The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown." on my log and the package ends up with an error.
Both times it is exactly the same package on the same server, so I don't know how the debug or even if there is anything I need to debug?
Regards,
Jan
Hi! Is there a free tool that would synchronize the database in development with the database in the live server? Thanks!
View 3 Replies View RelatedIs it possible in SQL Server to have replication happen immediately aschanges are made. That is, a change is made on server A, and that change isautomatically applied to server B, rather than the replication happening atset intervals?Thanks.
View 5 Replies View RelatedHello guys!
I went through the bunch of documentation pages about configuring the one for providing web subscriptions.
The most usefull for me were:
Security Architecture for Web Synchronization
How to: Configure an IIS Server for Web Synchronization (SQL Management Studio)
How to: Configure a Subscription to Use Web Synchronization
Topologies for Web Synchronization
Securing the Publisher
Subscribing to Publications
Mssubscription_properties (Transact-SQL)
How to: Configure a Subscription to Use Web Synchronization (Replication Transact-SQL)
sp_addmergepullsubscription (Transact-SQL)
Web Synchronization for Merge Replication
But I still have questions about it. If you could help me with small notes about subscribing to web based merge publication I would really appreciate that!
I believe, I just need a bit of clarification. The target setting is simple as it is: a client should connect to the our hosting server via HTTPS and update his pull subscription on demand by running .NET application.
Avoiding the server part, are the following steps correct and enough to accomplish what I need?
1. To create subscription, should I use the script:-- This script uses sqlcmd scripting variables. They are in the form-- $(MyVariable). For information about how to use scripting variables -- on the command line and in SQL Server Management Studio, see the -- "Executing Replication Scripts" section in the topic-- "Programming Replication Using System Stored Procedures". -- Publication must support anonymous Subscribers.-- Execute this batch at the Subscriber.DECLARE @publication AS sysname;DECLARE @publisher AS sysname;DECLARE @publicationDB AS sysname;DECLARE @websyncurl AS sysname;DECLARE @security_mode AS int;DECLARE @login AS sysname;DECLARE @password AS nvarchar(512);SET @publication = N'AdvWorksSalesOrdersMergeWebSync';SET @publisher = $(PubServer);SET @publicationDB = N'AdventureWorks';SET @websyncurl = 'https://' + $(WebServer) + '/WebSync';SET @security_mode = 0; -- Basic Authentication for IISSET @login = $(Login);SET @password = $(Password); -- At the subscription database, create a pull subscription -- to a merge publication.USE [AdventureWorksReplica]EXEC sp_addmergepullsubscription @publisher = @publisher, @publication = @publication, @publisher_db = @publicationDB, @subscriber_type = N'anonymous'; -- Add an agent job to synchronize the pull subscription. EXEC sp_addmergepullsubscription_agent @publisher = @publisher, @publisher_db = @publicationDB, @publication = @publication, @distributor = @publisher, @job_login = @login, @job_password = @password, @use_web_sync = 1, @internet_security_mode = @security_mode, @internet_url = @websyncurl, @internet_login = @login, @internet_password = @password;GO
What is @job_login parameter here? As I understand, I will not run SQL Agent job as our client uses MS SQL Server 2005 Express. And I do not want to run it as we will provide a client with .NET application for performing synchrinization on demand
Parameter @publisher means full SQL Server instance name? For example, MYMACHINEMSSQLSERVER?
What user will be used to connect to the distributor and to the Publisher? Will it be @internet_login?
Do I need running sp_addmergepullsubscription_agent if I€™m going to use the following .NET application code to synchronize over the Internet?
2. To perform synchronization with our hosting servers, should a client use the following code?
// Define the server, publication, and database names.
string subscriberName = instanceName;
string publisherName = instanceName;
string publicationName = "AdvWorksSalesOrdersMerge";
string subscriptionDbName = "AdventureWorksReplica";
string publicationDbName = "AdventureWorks";
string hostname = "adventure-works\garrett1";
string webSyncUrl = "https://" + instanceName + "/SalesOrders/replisapi.dll";
// Create a connection to the Subscriber.
ServerConnection conn = new ServerConnection(subscriberName);
MergePullSubscription subscription;
MergeSynchronizationAgent agent;
try
{
// Connect to the Subscriber.
conn.Connect();
// Define the pull subscription.
subscription = new MergePullSubscription();
subscription.ConnectionContext = conn;
subscription.DatabaseName = subscriptionDbName;
subscription.PublisherName = publisherName;
subscription.PublicationDBName = publicationDbName;
subscription.PublicationName = publicationName;
// If the pull subscription exists, then start the synchronization.
if (subscription.LoadProperties())
{
// Get the agent for the subscription.
agent = subscription.SynchronizationAgent;
// Check that we have enough metadata to start the agent.
if (agent.PublisherSecurityMode == null)
{
// Set the required properties that could not be returned
// from the MSsubscription_properties table.
agent.PublisherSecurityMode = SecurityMode.Integrated;
agent.DistributorSecurityMode = SecurityMode.Integrated;
agent.HostName = hostname;
// Set optional Web synchronization properties.
agent.UseWebSynchronization = true;
agent.InternetUrl = webSyncUrl;
agent.InternetSecurityMode = SecurityMode.Standard;
agent.InternetLogin = winLogin;
agent.InternetPassword = winPassword;
}
// Enable agent output to the console.
agent.OutputVerboseLevel = 1;
agent.Output = "";
// Synchronously start the Merge Agent for the subscription.
agent.Synchronize();
}
else
{
// Do something here if the pull subscription does not exist.
throw new ApplicationException(String.Format(
"A subscription to '{0}' does not exist on {1}",
publicationName, subscriberName));
}
}
catch (Exception ex)
{
// Implement appropriate error handling here.
throw new ApplicationException("The subscription could not be " +
"synchronized. Verify that the subscription has " +
"been defined correctly.", ex);
}
finally
{
conn.Disconnect();
}
What does HostName parameter use for? What is that host? Subscriber€™s machine name instance name? Or Publisher€™s? Or Distributor€™s?
Why parameters PublisherSecurityMode and DistributorSecurityMode have value SecurityMode.Integrated? How it is used in the replication model for web synchronization? As I understood from the documentation, client (Merge Agent) should connect to the Subscriber, get the changes, connect to hosting server via HTTPS and perform transactions through the SQL Server Replication Listener, thus the internet login to the IIS should be used to perform all the operations on hosting server side? The same internet login will be used to get snapshot from UNC share?
If I€™ve chosen to use FTP to provide with snapshots, should I then provide ftp parameters to sp_addmergepullsubscription_agent stored procedure or they will be used automatically by ISAPI filters on hosting server?
Thank you.
Hello,
I'm having to build a smart client application that works with an offline sql express database on the client. And works with several types of databases - that may be configured to work as a central server. The list includes the sql server family including 2000, 2005 and express and also IBM DB2.
I have to address some rather complex merge replication scenarios. By Merge I mean the ability to deal with handling and synchronization of bi-directional changes. More specifically changes to data may be made to any database in the system. either local or central.
I'm afraid, I cannot use sql replication in a heterogenous mode for several reasons. Some being - the database is being auto attached on the client, the application is expected to live up to the 'low impact' install ideology and should not need any major configuration etc.....
Are there any recomended approaches/Ideas one may use to acheive replication. Any links/information/ideas will be great.
Thanks,
Avinash
First please look at image:
Code Snippet
http://www.patysie.com/screen.png
Can I be 100% sure that script component 3 (orange) will start AFTER script component 1 (yellow) is finished?
Sorry for link but I couldn't paste an image.
Hi!
I'm developing a Windows Mobile solution (Pocket PC Win 5-6). I have Sql Server CE on the device and I use RDA (Remote Data Access) to pull the tables to the Sql Server CE. I use RdaTrackOption.TrackingOffWithIndexes so I can Alter the table design. Then I use the function SubmitSql to push back my changes. On the server I have a table for example Customers, it has a column called CustomerId with identity(1,1). Let's say the highest Id is 100 and the lowest is 50, when I add a record in the Sql Server CE it gets CustomerId = 1 then next one 2 etc which means identity is working but does not continue after 100. I don't need to use the CustomerId when I push my data back because I have sql syntax taking care of @@IDENTITY when inserting new records. Anyone who knows why it begins on 1 and not 101?
/Magnus
I have 2 distributed databases which need to be synchronized at regular basis. I plan to write a service that does it. But I'm just curious how to do the update incrementally. Thanks
View 4 Replies View RelatedI have a website that is running on the intranet and on a notebook. I have a notebook that is not always connected to the internet.. when it is not connected, it will read in some data from a barcode reader; and when it's connected, it will synchronize the data with the db on the intranet.. any idea on how to achieve this?
View 2 Replies View RelatedHi All,
I want to do SQL Server DB Synchronization. The scenario is like this..
DataBase is presently on SQL Server 2005, When end user click on button or on some action event
all data to from the server should be fetched & should be saved on client m/c. Afer that when user click on button or on some
event, DB should be synchronized. i.e. if there is any change in Server Data, client data should be automatically update...
How can i achieve this using C#..
Plzzz Help!!!!!
I am a complete novice so I would appreciate any help or suggestions.
I have two databases : 1 development DB, 1 production DB (both are SQL Server)
I make changes to development DB on a daily basis and I need a method to bring these changes across to production DB.
Currently I query the selected table in the development DB and write the DataSet to an XML file.
##
objDataSet.WriteXml(Server.MapPath("xDataDictionary.xml"))
##
Once I go to client site (where production DB is located) I want to generate a DataSet (which I am able to do) and compare this DataSet with the DataSet created when I read in the XML file.
##
'read in XML file
XMLDataSet.ReadXML(Server.MapPath("xDataDictionary.xml"))
##
There is a unique identifier in the table and XML file called 'FieldID'.
What I need to do is compare DataSet (from Production DB) with DataSet from XML file.
If there is a 'FieldID' in the DataSet from XML file that IS NOT in DataSet from ProductionDB I want to insert this node/row into the database.
Any suggestions?
crimsonIE ;-P
I was wondering if anyone knows if there is any software available or
if it is easy to implement the following.
We are running a SQL Server database locally in house and also have
the exact same database running on a hosted webserver. The data
changes on both versions of the database daily and what we need to do
is figure out a simple easy / cheap way to have the two databases
synchronize with each other every evening so that the data is exactly
the same every morning.
I would appreciate any input.
thanks
Mark
hi!
all.
i want to create a web application architechture which having multiple web server.
this all web server having sql server database.
now what i want is to Keep all data in all databases.
means i want to synchronize my all sql servers.
it is also possible ki my one webserver can have multiple clusted database.
hope to hear soon from u people.
Regards
Viky
Hi Guys:
I am trying to synchronize my home sqlserver database with a database on my web hosting company. I am not really sure how to go about it, any suggestions?
Thanks
Hi, I want to know the a solution for my Synchronization Scenario
I have a several client databses which are SQL Server 2005 Express and i have a master database which is SQL Server 2000 containing all the individual Client databases. All the individual client databases are kept seperately at the master location. I need to Synchronization the client database with its copy at the master database (something like Merge replication). Both the Client Copy as well as Master Copy could be Publishers & Subscribers.
Now the problem is Because of security & firewall issues, only the Client should have the ability to schedule & initiate the synchronization process with the master copy. Unfortunately SQL Server 2005 Express has only subscriber agent and not a publisher agent.
Any help on how to achieve this would be appreciated . Thank You
I have one Informix in OpenVMS machine and another MS SQL in Windows machine. I cannot touch the Informix server at all.
How to do the extract/update the data periodically from Informix to SQL? I was thinking of writing a service. But I don't know how to do the incremental update.
I was thinking of doing a pull subscription from MS SQL. Is it feasible? Is it a replication or integration service? I dunno. Please help.
Thank you.
Dear All,
How to do Sql Server Synchronization.
Say:
Server "A" contains "123" database.
Server "B" contains "123" database.
But changes is made on Server A. I want that every changes made on server A "123" database should reflect on Server B "123" database on real time basis.
whether it is done through replication or any other way, i want practical answer so that i can try it out.
Thanks
Dear all,
I am using SQL Server 2000 Ent/Dev edition. I have a 2 identical database in 2 different servers and i'm required to synchronize both database. However, i need to exclude some of the tables in during this process.
I tried to search this forum but can't find any solution. How can i perform the above task? BTW i can't use trigger as i have more than 100 tables.
HOpe someone can help. Thanks.