Hi All,
I will have to setup two windows 2000 servers at separate locations. Each server will host the MS SQL 2000 database. The data on both database will need to be in sync in real time. Is it possible to do? If yes, any suggestions of how do do it?
Thanks
Khen
hi,
Problem: Synchronize the data between sqlce in pocket pc emulator and sql server 2000 in desktop computer.
Given: i have configured the IIS and while connecting the pocket pc IE to sql ce server agent..evreythings ok.
called the synchronize method.
ERROR: normally two error occurs:
native error 29045
and native error 29006
connecting with sql server reconciler failed..
any bidy can tell me what is sql server reconciler and why these error occurs...
moreover: if someone can tell me how the sql server 2000 interacts with IIS.
Can someone recommend a utility (preferably open-source) tosynchronize changes across servers? I need to bring only data over insome cases, and only objects in other cases. Any ideas?Thx!
View 5 Replies View RelatedISSUE: While synchronizing data between the PDA and MS SQL Server database, using Active Sync connection, the sync process fails at times and displays an empty error message box and occasionally it shows the following exception: Error During Synchronization: A native exception occurred. ExceptionCode:0xc0000005 ExceptionAddress:0x01627b28 Reading: 0x1e000000 OK to terminate CANCEL to debug Moreover the .SDF file on the PDA gets corrupted. The ActiveSync connection drops as soon as the sync process fails. Later when the .SDF file is deleted and restored the synchronization is successful. Note: The replication monitor in the SQL Server indicates that the synchronization was successful even when the above error occurs.
View 3 Replies View RelatedI Create an availibility Group with a primary and a secondary. (For test)
Then run Planed Failover.
Switched to secondary. That's ok.
After that I update some tables on secondary (That now is primary)
I Run Again Planed Failover on server 2.
Switched. OK
But primary database Get (Not synchronizing) Status.
And in primary I don't have that updates.
How to sync these databases and exit from Not synchronizing.
Im working on a project. This program will run off of a sql 2005 database. The company that we are selling this too uses sql 2000. They will end up using both. They will enter their data as usual, into the sql 2000, and then I need to get that data from 2000 to the 2005 database, anytime a transaction occurs, I need that transaction to also occur in the 2005 database. The 2000 DB has 4 tables. These 4 tables are split up into different ones in 2005, so I will need to map it just right. (This may sound dumb, but it is what they want so what are ya gonna do?) My question, is there an easy way for sql 2000 to communicate with 2005. I planned on making a trigger in 2000, that triggers a web service, that reads from 2000 and maps it into the right tables in 2005. Is this the best option or are their others Im not thinking of .... thanks.
View 4 Replies View RelatedHI ,
I want to synchronize sql 2005 CE edition with SQL 2000.before this i was using sql ce 2.0 and i manage to synchronize with sql 2000.the codes which i used for synch i am specifying below.
Private Const INTERNETURL As String = "http://ihsan/THPMIS/sscesa20.dll"
Private Const PUBLISHERSERVER As String = "IHSAN"
Private Const PUBLISHERDATABASE As String = "THPMIS"
Private Const PUBLISHERSECURITYMODE As SecurityType = SecurityType.NTAuthentication
Private Const PUBLICATION As String = "THPMIS"
Private SUBSCRIBER As String = Dns.GetHostName()
Private Const LOCALDATABASE As String = "My DocumentsTHPMIS.sdf"
'"Provider=microsoft.sqlserver.oledb.ce.2.0;data source=" &
Private Const CONNECTIONSTRING As String = "Provider=Microsoft.SQLSERVER." & _
"OLEDB.CE.2.0;Data Source=" & LOCALDATABASE
Private Const SQLSTRING As String = "Provider=sqloledb;Data Source=IHSAN;Initial Catalog=THPMIS;User ID=sa;Password=sa"
Private Sub ReplicateData()
Dim replicator As New SqlCeReplication
replicator.InternetUrl = INTERNETURL
replicator.Publisher = PUBLISHERSERVER
replicator.PublisherDatabase = PUBLISHERDATABASE
replicator.PublisherSecurityMode = PUBLISHERSECURITYMODE
replicator.Publication = PUBLICATION
replicator.Subscriber = SUBSCRIBER
replicator.SubscriberConnectionString = CONNECTIONSTRING
replicator.Synchronize()
replicator.Dispose()
End Sub
while i am using sql 2000 with sql CE 2005 it is giving an error unknown connection option in connectionstring:provider. can any one give me some suggession how to solve this problem
Best Regards
Ihsan
I'm writing a site in ASP.NET 2.0. I have business logic that contains two methods:ModifyUserInDB() // Modifies user data in a SQL 2005 tableandGetUserFromDB() // Gets user data from the SQL 2005 user tableIf the two methods above get executed at the same time by two different users (but on the same record in SQL 2005), how do I prevent the data from being corrupted? Does SQL do this automatically?If I make the methods static, and synchronize them, will it fix the issue? Are static objects the same instance for all users?
View 5 Replies View RelatedHi, I have developed a software which is to run on multiple PCs on a network sharing the same database on an inhouse server. There is another database which has some similar tables that sites on a server where the website is. I need to have the common tables synchronized. How is this possible and what issues will I have in doing this?
Well there be a problem if the synchronization happens when someone is using our software which is making some changes to that table at the same time? Or if someone on the website is entering some information that updates the database?
I am using Visual Studio 2005 with C#. Access Database.
We have a database in an AlwaysOn Availability Group that has gone into a state of Not Synchronizing / Suspect on the secondary.
The reason why this happened is because the secondary ran out of disk space so the log file wasn't able to be written to. The database was set to synchronous mode.
Is the only way to recover from this to do a re-initialization or is there another way to recover?
Hi!
I have some questions about the MSDN article "Step by Step: Developing a SQL Mobile Application with Visual Studio 2005 and SQL Server 2005" (it is msdn2.microsoft.com/en-us/library/Aa454892.aspx).
Everything works good up to Exercise 3: Synchronizing Data Between Any Backend Database and SQL Mobile Database Using a Web Service. It is said that we need a DataService.asmx file to be enetered into "Web reference name". Unfortunately I can't find the HOL302_SQL_Mobile to download and install this file. Where I can find this file?
Can anyone tell me how can I do such a replication(C#)?
How can I synchronise data from mobile device to SQL Server using GPRS connection? (I only know replicating over USB).
Hi,
I have a problem that I have never considered before. I am developing with C#.Net, Visual Studio.Net ans SQL Server on Windows Server 2003.
Recently we have been upgrading our servers and have installed 2 servers (Live and Dev). The live server is Win Server 2003 Standard while the Dev server is 2003 enterprise.
Both servers are running their own versions of SQL Servers (both 2002). What I need to know, is there a way to copy or 'sync' the dev database to the live without over-writing the live data. I need to be able to copy the dev db structure (the tables anf fields) but not over-write the live data with the dev data (the live data changes rapidly and none can be lost). These 'syncs' would happen 2-3 times a month so the 2 db's, at the time of sync, will look very different so a simple copy of the live data to the dev db is not possible.
Does SQL Server have a wizard or utility? I have not been able to find one.
Thanks,
Justin
Hi,Is it possible to make changes to an Access 2000 database on my desktop, andhave it update those changes to SQL Server 2000 on the web?I have to update stock and prices every night. Right now I am using Access2000, and I just make the changes, and then upload the changed db to theserver, and overwrite the old db.But I am going to be using SQL Server 2000 soon, and I know you don't justoverwrite the db each time.There are about 6 fields that *might* change each night, per record.Is it called replication? How (basically) do I go about it? Are thereprograms out there that will make it easier?Thanks for any advice!J~
View 2 Replies View Related
Hi,
I have a potential client who wants to run three web sites at different locations, each storing data to SQL Server (let's say it will be SQL Server 2005, for the sake of argument). Periodically, but at least once a day, they would like all changes to be made in any server to be reflected in the other two.
As a develeoper, my initial approach would be to write web services that can transmit and recieve changes. Triggers on the database tables would copy data into "shadow" tables and then the web services would periodically wake up and send their changes to the other two servers.
However, before I go down this route, I wondered if any of the standard SQL Server tools (like SSIS) would handle this scenario (maybe with an agent FTPing files between the servers)?
Alternatively, does anyone know of any off-the-shelf partner solutions that can acheive the same result?
Many Thanks,
Chris Boothroyd
Is it possible to use SSIS to synchronize the data between a Foxpro .dbf and a compatible SQL Server table on a near realtime basis?
I have succesfully created an SSIS package that will insert data into the SQL Server Table but this is only useful for migrating data. What I need is a way to insure that the data in the SQL Server table matches that in the .dbf on a near realtime basis.
Or is there a way to link from SQL Server to the .dbf (similar to an Oracle DBLink).
Thanks for any and all assistance.....
Dave
Problem description
There are two sql servers with the same database in different locations with replication running on them. Users in the two locations insert or update date on there own database through an ms access application . The data are replicated to both servers.
Someone wanted a copy of the database and they dropped replication, but users continue to modify and add data on both servers and so replication could not be back again without merging the two databases as one again and restarting replication.
My job was to merge the databases and make replication work and after allot of work all is fine.
I copy and attached the database on my pc that I set up as a server and did the job. Then I went back on both servers that had replication running before I attached the database and set the subscriber and publisher and all was fine to that point.
The database has six groups with permissions on them and many database users on each location. Both the groups and the users show on the database.
I create a new login and user and I add him to the groups to get the permissions.
Now back on a user pc I login with the new user name run the ms access application and try to add some new records, but I get errors that I cannot insert null values to two of the fields in several tables in the database.
This was not happening before and the database was recording the values in those fields namely the user name and the date that the new record was created.
After some reading I found out that I might need to set the groups and permissions on the views and tables from the beging but Im not an expert.
Any ideas?
Thanks allot
George
I am trying to move a database which I wrote in SQL Server 2005 to a SQL Server 2000 database.
I'm not sure the best way to do this.......
Can anyone enlighten me?.....
I am working on a project that was written in Visual Studio 2003 using asp.net and C#. The project accesses a SQL Server 2000 database. I need to test the application. What I want to do is to copy the database over to a test server. The problem is that the test server only has SQL Server 2005 on it. Would it be a problem if I backed up the database using SQL Server 2000 and then recreated it on the server as a SQL server 2005 project? Would my source code accept the new database even though it would now be in sql server 2005?
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran
When I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
Hi,I have 2 tables (let's call them tableOld and tableNew) that I'm trying to synchronize. The tables may or may not be on the same server (I'm not sure - let's assume they're on different servers).Given below is the table structures:******************************************************************************* tableOld ------------- tableOld uses a View to access name information.View name = vwUserDetailsColumns in View = Firstname, Lastname, Fullname tableNew--------------- ProjectManagerID (PK, int, not null) <-- autogeneratedFName (varchar(50), null)LName (varchar(50), null)Inactive (int, null) *********************************************************************** Basically, I'm trying to write a script so that when a user runs the script that will do something like this: 1) it will add all the names in tableOld to tableNew (only if they don't already exist in tableNew)2) if there is a name in tableNew that does not exist in tableOld (because the name was deleted from tableOld), tableNew will set Inactive = 1 for that name. Any help is appreciated. Thanks.P.S. Is there a way the script can run automatically any time a user adds or deletes a name from tableOld?
View 10 Replies View Relatedwhat's the best way to synchronize to mssql databases
(one is 2005 express and one 2005)
what's the best way to synchronize 2 databases(mssql 2005) on 2 different servers.
View 3 Replies View Related
Hi
I am trying to synchronize two tables on different servers, the one with me with the one is australia.
I have a table called MeriesHBMem on both databases and the one with me gets updated everyday, and then i have to use a program called SQL Delta to synchronize all the new rows. How can i go about doing this using SSIS?
Any help would be greatly appreciated! I though about using a trigger for this, but i don't know how to go about connecting the two servers in the trigger's SQL statement, and besides i also think that a trigger will be a huge performance issue.
Data gets inserted into the table, all i want is a SSIS package to execute every 30min or so and take the new data and insert it into the other database's table
Kind Regards
Carel Greaves
Hi
I have two servers, on one i have SQL Server 2000 ( root ) and on the second SQL Server 2005. I need synchronize some data ( not the whole database ) on 2005 but i can't use Analysis Services . What i can do in this situation ?
Dest wishes
Scenario regarding SQL 2000.
I have the same table on 2 different servers, Server R and Server L.
This table schema is:
ID int not null
Name varchar(50) not null
Password varchar(50) not null
IsUpdate int not null default (0)
People has an application that enables them to change their passwords in the table on Server L.
There is a for update trigger in the table on server L that sets IsUpdate column to 1 when any password has been modified.
The required scenario:
- Synchronizing passwords in the table on server R with passwords in the table on server L.
- Then setting the IsUpdate column in the table on server L to 0 again.
What is the best technology for that?
Please send me a code proposal.
Many Thanks and Best Regards,
Bishoy
I have a SQL Server 2005 web database and a local SQL Server 2005 database. I want a tool that can synchronize both the database from the source (web) to the target (local).
View 3 Replies View RelatedI have a database called 'DB1' in SQL Server 2000. I want to create the same database in SQL Server 2005 Express including the original data in tables.
How would I do that? I cannot find any option to do this upgrade in SQL Server Management Studio.
Hi All
I have Computer is setuped SQL Server 2000 and SQL server 2005 when I restore SQL Server 2005 it's OK but when it's not OK when I restore in SQL Server 2000. The Error as follows:
Please help me to solve this problem. Thanks
We have experienced an issue with back backup / restore of a database originating from SQL Server 2000 to SQL Server 2003.
We have the following setup:
SQL Server 2000
- DatabaseA
- asdfUser (SQL User)
- asdfUser is (dbowner) of DatabaseA
- DatabaseB
- asdfUser (SQL User)
- asdfUser is (dbowner) of DatabaseB
SQL Server 2005 Standard
-asdfUser is NOT Setup as a user yet.
-We restore DatabaseA and DatabaseB to the SQL Server 2005 Standard. The databases are restored with the security permissions of asdfUser being the DB Owner of DatabaseA and DatabaseB.
-We create a new SQL user named asdfUser on the SQL Server 2005 box. We then try to add the UserMapping of DBOWNER for the DatabaseA and DatabaseB. We receive an error message stating that the asdfUser already have permissions to the databases. We proceed with the user creation without those permissions.
-We proceed to the login properties of the asdfuser and view their UserMappings. The asdfUser does not have access to DatabaseA or DatabaseB. We then add the UserMapping of DBOWNER to both DatabaseA and DatabaseB. We Try to select OK and we receive an error message that states that the user already has those permissions.
-When we query the UserID's of the asdfUser that is in the database and the UserID of the asdfUser that is created, they are two different values.
I assume this is a bug... any word on a fix?
Does Sql Server Compact Edition 3.5 support RDA synchronization with Sql Server 2000 database?
Hello:
I have an old database created in SQL Server 2000,
now I can open, access it in SQL Server 2005 Management Studio, but I can't create Data Diagrams.
Please advise on how to make it work....
Thank you
I found that when I install MSDE, then I can create/edit database objects for MSDE database in Visual Studio 2003 Server Explorer, but when I try to create/edit database objects under the default database created by the SQL Server 2000 installation, I cannot do these tasks as no option for these tasks appear when I right-click on the database object in Server Explorer. Anyone knows why this is happening?
View 3 Replies View Related