I've got two very similar tables on seperate servers and databases. Both sqlserver. I am being told I cannot link the databases. I need to keep one table current with the other.
Is SSIS my best option?
At a high level, what should I do? What connect types?
Hi ,
Does anyone how to sync data from one table to the exact same table on another server?PLease help
TY
Burner
I have 2 databases with corresponding history databases.
As the system is under development, the 2 databases are changing in structure i.e the table structure(new tables as well as changes to existing ones) and indexes will change every week.
What is the best solution to replicate the changes on the history database.
Regards,
Ashutosh
I'm restoring a production server onto a backup server. I have all the user databases restored, but trying to figure out how to transfer to logins to the backup server. any ideas?
View 2 Replies View RelatedWe have a database on our central servers that is the backend to a webapplication we have in ColdFusion. About 4 times a year, we have a userthat goes out to other locations without internet access that would needaccess to this application. Once she comes back to the office, we wouldlike to update any changes she has made to the central server database.What is the best course of action to do this?To start, we thought we would install msde on the laptop, along with asingle user version of ColdFusion and IIS so she could run the application.How would we get that new data from her laptop to our main database?Thanks for any input.
View 1 Replies View RelatedIs it possible to merge/sync 2 "part time connected" Sql Server databases? I basically want to keep one of my in office databases synced with a database on my hosting provider. (Said hosting provider does not offer SQL Server's built in Merge Replication) Can anyone recommend a 3rd party application that does this if one exists?
View 1 Replies View RelatedWe have two SQL 2012 servers, sever A and B.
We need to sync a database on A so that there is a copy of it on B.
We need to be able to query both databases so mirroring isn't an option.
I have taken over a transactional replication setup that is being usedfor fault tolerance (I know, I know...).The scenario I am concerned with is where the publisher goes down due tofailure, so we need to point our application at the subscriber and startupdating the data there. We are not using the immediate updating option.How do I go about re-syncing the publisher with the data that been addedto, or changed on the subscriber, when the publisher comes back online?Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedI have database on localhost and i want to show this data on my website. I want to create a database online and want to sync with Local Host. Can it be possible syncing data automatically after some interval?
View 6 Replies View RelatedI'm new to my company, although not new to SQL 2005 and I found something interesting. I don't have an ERD yet, and so I was asking a co-worker what table some data was in, they told me a table that is NOT in SQL Server 2005's list of tables, views or synonyms.
I thought that was strange, and so I searched over and over again and still I couldn't find it. Then I did a select statement the table that Access thinks exists and SQL Server does not show and to my shock, the select statement pulled in data!
So how did this happen? How can I find the object in SSMS folder listing of tables/views or whatever and what am I overlooking?
Thanks,
Keith
We have 20 -30 normalized tables in our dartabase . Also we have 4tables where we store the calculated data fron those normalised tables.The Reason we have these 4 denormalised tables is when we try to dothe calcultion on the fly, our site becomes very slow. So We haveprecalculated and stored it in 4 tables.The Process we use to do the precalcultion, will get do thecalculation and and store it in a temp table. It will compare the thetemp with denormalised tables and insert new rows , delte the old oneans update if any changes.This process take about 20 mins - 60mins. Ittakes long time because in this process we first do the calculationregardless of changes and then do a compare to see what are changed andremove if any rows are deleted, and insert new rowsand update thechanges.Now we like to capture the rows/columns changed in the normalisedtables and do only those chages to the denormalised table , which weare hoping will reduce the processing time by atleast 50%WE have upgraded to SQL SERVER 2005.So We like to use the newtechnology for this process.I have to design the a model to capture the changes and updated onlythose changes.I have the list of normalised tables and te columns which will affectthe end results.I thought of using Triggers or OUTPUT clause to capture the changes.Please help me with the any ideas how to design the new process
View 3 Replies View RelatedI am using the following select statement to get the row count from SQL linked server table.
SELECT Count(*) FROM OPENQUERY (CMSPROD, 'Select * From MHDLIB.MHSERV0P')
MHDLIB is the library name in IBM DB2 database. The above query gives me only the row count of table MHSERV0P. However, I need to get the names, rowcounts, and sizes of all tables that exist in MHDLIB librray. Is it possible at all?
From Newbie to Newbie,
Add reference to:
'Microsoft ActiveX Data Objects 2.8 Library
'Microsoft ADO Ext.2.8 for DDL and Security
'Microsoft Jet and Replication Objects 2.6 Library
--------------------------------------------------------
Imports System.IO
Imports System.IO.File
Code Snippet
'BACKUP DATABASE
Public Shared Sub Restart()
End Sub
'You have to have a BackUps folder included into your release!
Private Sub BackUpDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BackUpDB.Click
Dim addtimestamp As String
Dim f As String
Dim z As String
Dim g As String
Dim Dialogbox1 As New Backupinfo
addtimestamp = Format(Now(), "_MMddyy_HHmm")
z = "C:Program FilesVSoftAppMissNewAppDB.mdb"
g = addtimestamp + ".mdb"
'Add timestamp and .mdb endging to NewAppDB
f = "C:Program FilesVSoftAppMissBackUpsNewAppDB" & g & ""
Try
File.Copy(z, f)
Catch ex As System.Exception
System.Windows.Forms.MessageBox.Show(ex.Message)
End Try
MsgBox("Backup completed succesfully.")
If Dialogbox1.ShowDialog = Windows.Forms.DialogResult.OK Then
End If
End Sub
Code Snippet
'RESTORE DATABASE
Private Sub RestoreDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
RestoreDB.Click
Dim Filename As String
Dim Restart1 As New RestoreRestart
Dim overwrite As Boolean
overwrite = True
Dim xi As String
With OpenFileDialog1
.Filter = "Database files (*.mdb)|*.mdb|" & "All files|*.*"
If .ShowDialog() = Windows.Forms.DialogResult.OK Then
Filename = .FileName
'Strips restored database from the timestamp
xi = "C:Program FilesVSoftAppMissNewAppDB.mdb"
File.Copy(Filename, xi, overwrite)
End If
End With
'Notify user
MsgBox("Data restored successfully")
Restart()
If Restart1.ShowDialog = Windows.Forms.DialogResult.OK Then
Application.Restart()
End If
End Sub
Code Snippet
'CREATE NEW DATABASE
Private Sub CreateNewDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
CreateNewDB.Click
Dim L As New DatabaseEraseWarning
Dim Cat As ADOX.Catalog
Cat = New ADOX.Catalog
Dim Restart2 As New NewDBRestart
If File.Exists("C:Program FilesVSoftAppMissNewAppDB.mdb") Then
If L.ShowDialog() = Windows.Forms.DialogResult.Cancel Then
Exit Sub
Else
File.Delete("C:Program FilesVSoftAppMissNewAppDB.mdb")
End If
End If
Cat.Create("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program FilesVSoftAppMissNewAppDB.mdb;
Jet OLEDB:Engine Type=5")
Dim Cn As ADODB.Connection
'Dim Cat As ADOX.Catalog
Dim Tablename As ADOX.Table
'Taylor these according to your need - add so many column as you need.
Dim col As ADOX.Column = New ADOX.Column
Dim col1 As ADOX.Column = New ADOX.Column
Dim col2 As ADOX.Column = New ADOX.Column
Dim col3 As ADOX.Column = New ADOX.Column
Dim col4 As ADOX.Column = New ADOX.Column
Dim col5 As ADOX.Column = New ADOX.Column
Dim col6 As ADOX.Column = New ADOX.Column
Dim col7 As ADOX.Column = New ADOX.Column
Dim col8 As ADOX.Column = New ADOX.Column
Cn = New ADODB.Connection
Cat = New ADOX.Catalog
Tablename = New ADOX.Table
'Open the connection
Cn.Open("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program FilesVSoftAppMissNewAppDB.mdb;Jet
OLEDB:Engine Type=5")
'Open the Catalog
Cat.ActiveConnection = Cn
'Create the table (you can name it anyway you want)
Tablename.Name = "Table1"
'Taylor according to your need - add so many column as you need. Watch for the DataType!
col.Name = "ID"
col.Type = ADOX.DataTypeEnum.adInteger
col1.Name = "MA"
col1.Type = ADOX.DataTypeEnum.adInteger
col1.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col2.Name = "FName"
col2.Type = ADOX.DataTypeEnum.adVarWChar
col2.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col3.Name = "LName"
col3.Type = ADOX.DataTypeEnum.adVarWChar
col3.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col4.Name = "DOB"
col4.Type = ADOX.DataTypeEnum.adDate
col4.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col5.Name = "Gender"
col5.Type = ADOX.DataTypeEnum.adVarWChar
col5.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col6.Name = "Phone1"
col6.Type = ADOX.DataTypeEnum.adVarWChar
col6.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col7.Name = "Phone2"
col7.Type = ADOX.DataTypeEnum.adVarWChar
col7.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col8.Name = "Notes"
col8.Type = ADOX.DataTypeEnum.adVarWChar
col8.Attributes = ADOX.ColumnAttributesEnum.adColNullable
Tablename.Keys.Append("PrimaryKey", ADOX.KeyTypeEnum.adKeyPrimary, "ID")
'You have to append all your columns you have created above
Tablename.Columns.Append(col)
Tablename.Columns.Append(col1)
Tablename.Columns.Append(col2)
Tablename.Columns.Append(col3)
Tablename.Columns.Append(col4)
Tablename.Columns.Append(col5)
Tablename.Columns.Append(col6)
Tablename.Columns.Append(col7)
Tablename.Columns.Append(col8)
'Append the newly created table to the Tables Collection
Cat.Tables.Append(Tablename)
'User notification )
MsgBox("A new empty database was created successfully")
'clean up objects
Tablename = Nothing
Cat = Nothing
Cn.Close()
Cn = Nothing
'Restart application
If Restart2.ShowDialog() = Windows.Forms.DialogResult.OK Then
Application.Restart()
End If
End Sub
Code Snippet
'COMPACT DATABASE
Private Sub CompactDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
CompactDB.Click
Dim JRO As JRO.JetEngine
JRO = New JRO.JetEngine
'The first source is the original, the second is the compacted database under an other name.
JRO.CompactDatabase("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program
FilesVSoftAppMissNewAppDB.mdb; Jet OLEDB:Engine Type=5", "Provider=Microsoft.Jet.OLEDB.4.0;
Data Source=C:Program FilesVSoftAppMissNewAppDBComp.mdb; JetOLEDB:Engine Type=5")
'Original (not compacted database is deleted)
File.Delete("C:Program FilesVSoftAppMissNewAppDB.mdb")
'Compacted database is renamed to the original databas's neme.
Rename("C:Program FilesVSoftAppMissNewAppDBComp.mdb", "C:Program FilesVSoftAppMissNewAppDB.mdb")
'User notification
MsgBox("The database was compacted successfully")
End Sub
End Class
I'm working on an ASP.Net project where I want to test code on a localmachine using a local database as a back-end, and then export it tothe production machine where it uses the hosting provider's SQL Serverdatabase on the back-end. Is there a way to export tables from oneSQL Server database to another in such a way that if a table alreadyexists in the destination database, it will be updated to reflect thechanges to the local table, without existing data in the destinationtable being lost? e.g. suppose I change some tables in my localdatabase by adding new fields. Can I "export" these changes to thedestination database so that the new fields will be added to thedestination tables (and filled in with default values), without losingdata in the destination tables?If I run the DTS Import/Export Wizard that comes with SQL Server andchoose "Copy table(s) and view(s) from the source database" and choosethe tables I want to copy, there is apparently no option *not* to copythe data, and since I don't want to copy the data, that choice doesn'twork. If instead of "Copy table(s) and view(s) from the sourcedatabase", I choose "Copy objects and data between SQL Serverdatabases", then on the following options I can uncheck the "CopyData" box to prevent data being copied. But for the "CreateDestination Objects" choices, I have to uncheck "Drop destinationobjects first" since I don't want to lose the existing data. But whenI uncheck that and try to do the copy, I get collisions between theproperties of the local table and the existing destination table,e.g.:"Table 'wbuser' already has a primary key defined on it."Is there no way to do what I want using the DTS Import/Export Wizard?Can it be done some other way?-Bennett
View 3 Replies View RelatedI have a trade data tables (about 10) and I need to retrieve information based on input parameters. Each table has about 3-4 million rows.
The table has columns like Commodity, Unit, Quantity, Value, Month, Country
A typical query I use to select data is "Select top 10 commodity , sum(value), sum(quantity) , column4, column5, column6 from table where month=xx and country=xxxx"
The column4 = (column2)/(total sum of value) and column 5=(column3)/(total sum of quantity). Column6=column5/column4.
It takes about 3-4 minutes for the query to complete and its a lot of time specially since I need to pull this information from a webpage.
I wanted to know if there is an alternate way to pull the data from server ?
I mean can I write a script that creates tables for all the input combinations i.e month x country (12x228) and save them in table (subtable-table) with a naming convention so from the web I can just pull the table with input parameters mapped to name convention and not running any runtime queries on database ??
OR
Can I write a script that creates a html files for each table for all input combinations save them ?
OR
Is there exists any other solution ?
Hi all,
I have a large Excel file with one large table which contains data, i've built a SQL Server DataBase and i want to fill it with the data from the excel file.
How can it be done?
Thanks, Michael.
Hi,
Currently, I'm using the following steps to migrate millions of records from Foxpro tables to SQL Server tables:
1. Transfer Foxpro records to .dat files and then bcp to SQL Server tables in a dummy database. All the SQL tables have the same columns as the Foxpro tables.
2. Manipulate the data in the SQL tables of the dummy database and save the manipulated data into the SQL tables of the real database where the tables may have different structure from the corresponding Foxpro tables.
I only know the following ways to import Foxpro data into SQL Server:
#1. Transfer Foxpro records to .dat files and then bcp to SQL Server tables
#2. Transfer Foxpro records to .dat files and then Bulk Insert to SQL Server tables
#3. DTS Foxpro records directly to SQL Server tables
I'm thinking whether the following choices will be better than the current way:
1st choice: Change step 1 to use #2 instead of #1
2nd choice: Change step 1 to use #3 instead of #1
3rd choice: Use #3 plus manipulating in DTS to replace step 1 and step 2
Thank you for any suggestion.
I have 3 Checkbox list panels that query the DB for the items. Panel nº 2 and 3 need to know selection on panel nº 1. Panels have multiple item selection. Multiple users may use this at the same time and I wanted to have a full separation between the application and the DB. The ASP.net application always uses Stored Procedures to access the DB. Whats the best course of action? Using a permanent 'temp' table on the SQL server? Accomplish everything on the client side?
[Web application being built on ASP.net 3.5 (IIS7) connected to SQL Server 2005)
Firstly I consider myself quite an experienced SQL Server user, andamnow using SQL Server 2005 Express for the main backend of mysoftware.My problem is thus: The boss needs to run reports; I have designedthese reports as SQL procedures, to be executed through an ASPapplication. Basic, and even medium sized (10,000+ records) reportingrun at an acceptable speed, but for anything larger, IIS timeouts andquery timeouts often cause problems.I subsequently came up with the idea that I could reduce processingtimes by up to two-thirds by writing information from eachcalculationstage to a number of tables as the reporting procedure runs..ie. stage 1, write to table xxx1,stage 2 reads table xxx1 and writes to table xxx2,stage 3 reads table xxx2 and writes to table xxx3,etc, etc, etcprocedure read final table, and outputs information.This works wonderfully, EXCEPT that two people can't run the samereport at the same time, because as one procedure creates and writesto table xxx2, the other procedure tries to drop the table, or read atable that has already been dropped....Does anyone have any suggestions about how to get around thisproblem?I have thought about generating the table names dynamically using'sp_execute', but the statement I need to run is far too long(apparently there is a maximum length you can pass to it), and evenbreaking it down into sub-procedures is soooooooooooooooo timeconsuming and inefficient having to format statements as strings(replacing quotes and so on)How can I use multiple tables, or indeed process HUGE procedures,withdynamic table names, or temporary tables?All answers/suggestions/questions gratefully received.Thanks
View 2 Replies View RelatedDoes anyone have a script that can drop the Identity columns from all the tables in a database? Thanks
View 1 Replies View RelatedHello all,
Being still a relative newcomer to SQL Server (people may say I'm trying to take on too much being somewhat inexperienced once they read about the problem I'm trying to tackle, but alas...) I'm running into the following problem: I need to create tables in my user database on the fly (using Stored Procedures) so that each table can be created many times in the database but only once for every user. The tables should be named something like "username.Table1", "username.Table2" etc. as opposed to "dbo.Table1". I then want to use the stored procedure from .NET/C# in my web application, so that i can create the complete set of usertables for each of my clients.
Now, I tackled the stored procedure part (that is, it creates all the tables I need with all the parameters I want) and am able to use it from my web application (which took some time to learn but proved quite easy to do), but I cannot seem to get it coupled to the current user (instead of the dbo). Every time I trie, the tables are created as dbo.Table1 and when I try to create a new set, it gives a warning ("table with name such and so already exists..."). I made sure to log in as an authenticated user (using forms authentication) before trying to create the tables but this gives the aforementioned result.
What am I doing wrong? I use Visual Web Developer Express, SQL Server 2005 Express and IIS version 5.1
Please help :-D
Greetingz,
DJ Roelfsema
hi. I am very new to databases.
At the moment I have one big database that has column titles such as author, book title, rating, isbn, publisher, publish date, copyright date, graphical image review, availability, genre.
I want to break this large table down into say four smaller relational tables. Partly because it is so large and partly to make it easier to bind the data to the web site. I also want to keep the large table.
How can i do this? I use sql server management express. The database is on my hosts database. I also use VWD 2005 express edition.
thanks for your time
nick
Ok say I would like to build a table for of the following questions(say 6 questions for the sake of argument):
Do I just stored the index of the radiobuttonlist. What are some resources that I could look at. Should I make a look up table.
5) If money were no object, I would live . . .
Prefer not to say
On a tropical island
In a New York penthouse
In an English castle
On a Texas ranch
In a Malibu beach house
In a mountain retreat (Selected)
On the moon
None of the above
1 --->
2 --->
3 --->
4 --->
5) --->6 This is the question we are looking at.
6 --->
How should I create the database table for the above example.
I have created 3 views, which I then want to join to produce an overall result. The first view returns customer details, along with payment information. The next two views return values only when the customer has purchased extras outside our standard product i.e. if there is no purchase of an extra, then nothing is written to the extra's table. When I join the views together they only return values where data has been matched in all 3 views i.e. extra's have been purchased. Any data that did not match in all 3 view (i.e. no extra's purchased) is either ignored or dropped from the results. So I need my script to return all values even if no data exists in the two extra views.
My scripts are as follows:
Main View
SELECT
CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID,
CUSTOMER_POLICY_DETAILS.HISTORY_ID,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONUSER,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE,
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID,
CUSTOMER_INSURED_PARTY.SURNAME,
SYSTEM_INSURER.INSURER_DEBUG,
SYSTEM_SCHEME_NAME.SCHEMENAME,
CUSTOMER_POLICY_DETAILS.POLICYNUMBER,
--TotalPayable
IsNull(SUM(CASE LIST_TRAN_BREAKDOWN_TYPE.IncludeInTotal
WHEN 1 THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS TotalPayable,
--NetPremium
IsNull(SUM(CASE ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID
WHEN 'NET' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS NetPremium,
--IPT
IsNull(SUM(CASE
WHEN SubString(ACCOUNTS_TRAN_BREAKDOWN.Premium_Section_ID, 1, 3) = 'TAX' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS IPT,
--Fee
IsNull(SUM(CASE ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID
WHEN 'FEE' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS Fee,
--TotalCommission
IsNull(SUM(CASE
WHEN SubString(ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID, 4, 4) = 'COMM' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS TotalCommission
FROM
ACCOUNTS_CLIENT_TRAN_LINK
INNER JOIN ACCOUNTS_TRANSACTION
ON ACCOUNTS_CLIENT_TRAN_LINK.TRANSACTION_ID = ACCOUNTS_TRANSACTION.TRANSACTION_ID
INNER JOIN ACCOUNTS_TRAN_BREAKDOWN
ON ACCOUNTS_TRANSACTION.TRANSACTION_ID = ACCOUNTS_TRAN_BREAKDOWN.TRANSACTION_ID
INNER JOIN LIST_TRAN_BREAKDOWN_TYPE
ON ACCOUNTS_TRAN_BREAKDOWN.TRAN_BREAKDOWN_TYPE_ID = LIST_TRAN_BREAKDOWN_TYPE.TRAN_BREAKDOWN_TYPE_ID
INNER JOIN CUSTOMER_POLICY_DETAILS
ON CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID = ACCOUNTS_CLIENT_TRAN_LINK.POLICY_DETAILS_ID AND
CUSTOMER_POLICY_DETAILS.HISTORY_ID = ACCOUNTS_CLIENT_TRAN_LINK.POLICY_DETAILS_HISTORY_ID
INNER JOIN SYSTEM_INSURER
ON CUSTOMER_POLICY_DETAILS.INSURER_ID = SYSTEM_INSURER.INSURER_ID
INNER JOIN SYSTEM_SCHEME_NAME
ON CUSTOMER_POLICY_DETAILS.SCHEMETABLE_ID = SYSTEM_SCHEME_NAME.SCHEMETABLE_ID
INNER JOIN CUSTOMER_INSURED_PARTY
ON ACCOUNTS_CLIENT_TRAN_LINK.INSURED_PARTY_HISTORY_ID = CUSTOMER_INSURED_PARTY.HISTORY_ID AND
ACCOUNTS_CLIENT_TRAN_LINK.INSURED_PARTY_ID = CUSTOMER_INSURED_PARTY.INSURED_PARTY_ID
WHERE
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE = '2007-08-17' AND
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID <> 'PAY'
GROUP BY
CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID,
CUSTOMER_POLICY_DETAILS.HISTORY_ID,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONUSER,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE,
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID,
CUSTOMER_INSURED_PARTY.SURNAME,
SYSTEM_INSURER.INSURER_DEBUG,
SYSTEM_SCHEME_NAME.SCHEMENAME,
ACCOUNTS_TRANSACTION.Transaction_ID,
CUSTOMER_POLICY_DETAILS.POLICYNUMBER
Add on View 1
CREATE VIEW TOPCARDPA AS
select policy_details_id, History_id, Selected from customer_addon where product_addon_id = 'TRPCAE01'
Add on View 2
CREATE VIEW TOPCARDRESC AS
select policy_details_id, History_id, Selected from customer_addon where product_addon_id = 'HICRESC01'
Join Result Script
SELECT
TOPCARD.AUTHORISATIONUSER,
TOPCARD.AUTHORISATIONDATE,
TOPCARD.TRANSACTION_CODE_ID,
TOPCARD.SURNAME,
TOPCARD.INSURER_DEBUG,
TOPCARD.SCHEMENAME,
TOPCARD.POLICYNUMBER,
TOPCARD.TotalPayable,
TOPCARD.NetPremium,
TOPCARD.IPT,
TOPCARD.Fee,
TOPCARD.TotalCommission,
TOPCARDPA.SELECTED,
TOPCARDRESC.SELECTED
FROM
dbo.TOPCARD TOPCARD
INNER JOIN dbo.TOPCARDPA TOPCARDPA
ON TOPCARD.POLICY_DETAILS_ID = TOPCARDPA.POLICY_DETAILS_ID AND
TOPCARD.HISTORY_ID = TOPCARDPA.HISTORY_ID
INNER JOIN dbo.TOPCARDRESC TOPCARDRESC
ON TOPCARD.POLICY_DETAILS_ID = TOPCARDRESC.POLICY_DETAILS_ID
AND
TOPCARD.HISTORY_ID = TOPCARDRESC.HISTORY_ID
I have included all the scripts I have used, as others may find them useful, in addition to anyone that is able to provide me with some assistance. Thanks in advance for for the help.
I have facing a design problem and unable to justify which design to choose for my data model.
Usually, what we have is like data tables and reference tables to store data in those data tables.
My database has tables with 20-30 columns in them. And most of them (though not all of them), stores data from some reference tables. Meaning each column has an associated reference table where it stores possible list of values for that particular column. Sort of data domain for that column. FYI, My database is related to medical field.
For example, A table that has a varchar(40) column called "Differentiation". It can only store values from following list:
- Undifferentiated
- Moderate
- Poor
- Poor - Moderate
- Moderate - well
Now, to implement this, simple solution would be to have a reference table where I can store all these possible values...And then have just a reference of each data item into my "Differentiation" column in the table.
This is simplest and probably the best solution for such thing and i can also have referential integrity implemented for this.
But now if we look at the bigger picture, my database is growing and I have about 80 tables which I need to create where most of the columns will have different reference tables like I mentioned above. Approximate number of reference tables is 300 tables. All the reference table will have same structure, with different values for different columns.
Now, what seems to me is, because the table structure is same for every column, rather than having 300 different tables, I can only have 2 tables, where I can put all these reference values into these 2 tables.
Like,
Table 1 :
This table can have name of the reference table like "differentiationlist" etc.
Table 2:
It has reference to the reference table list in Table 1 discussed above and all the values that are part of that reference table can go in this table with its reference.
But problem with this is, because all the reference tables are in these two tables, I don't know how to implement referential integrity in this design.
Does anyone have any idea or solution for situation like this?
Thanks,
Ujjaval
I have a table that I am basically reduplicating a couple of times for each part of this database that I want to create.Each table basically has the same data: The tables will be called motherTable, fatherTable, sonTable, daughterTable and so on.I am pretty much using the following in each column: UserID, MotherID(or FatherID or SonID, etc., etc. and so on for each unique table), FirstName, LastName, MiddleName, BirthPlace, Photo, Age.I don't see an option to copy a table and just modify the second ID part and rename that table accordingly.How can I make this an easier way of creating these similar tables without retyping all these columns over and over again?Thanks in advance.
View 4 Replies View RelatedI need to copy data from warehouse tables to master tables of different SQL instances. Refresh need to done once in an hour. What is the best way to do this? SQL agent jobs or SSIS packages?
View 3 Replies View RelatedHi! I have a general SQL CE v3.5 design question related to table/file layout. I have an system that has multiple tables that fall into categories of data access. The 3 categories of data access are:
1 is for configuration-related data. There is one application that will read/write to the data, and a second application that will read the data on startup.
1 is for high-performance temporal storage of data. The data objects are all the same type, but they are our own custom object and not just simple types.
1 is for logging where the data will be permanent - unless the configured size/recycling settings cause a resize or cleanup. There will be one application writing alot [potentially] of data depending on log settings, and another application searching/reading sections of data.
When working with data and designing the layout, I like to approach things from a data-centric mindset, because this seems to result in a better performing system. That said, I am thinking about using 3 individual SDF files for the above data access scenarios - as opposed to a single SDF with multiple tables. I'm thinking this would provide better performance in SQL CE because the query engine will not have alot of different types of queries going against the same database file. For instance, the temporal storage is basically reading/writing/deleting various amounts of data. And, this is different from the logging, where the log can grow pretty large - definitely bigger than the default 128 MB. So, it seems logical to manage them separately.
I would greatly appreciate any suggestions from the SQL CE experts with regard to my approach. If there are any tips/tricks with respect to different data access scenarios - taking into account performance, type of data access, etc. - I would love to take a look at that.
Thanks in advance for any help/suggestions,
Bob
Has anyone seen this error? It comes up when my app executes a select statement via linked server (from MSSQL 2000 to 2005) the second time it runs. It's basically a timed poll of tables in the remote database. It works once but the second time it executes I get the error from the remote db, it's just a select but I guess the cursor is still open so it can't run again. After the exception the select will run again, once and it just repeats. I have researched it a little and it looks like it mostly has to do with the isolation level of the transaction. Unfortunately based on the componet being used to access the database I don't beleive I have the ability to use transact SQL to call the isolation level (s) listed.
Here's the weird part though, at another site the same scenario is running fine. Same primary and remote db versions of MSSQL as well as the application and it runs fine. I guess my question is what type of setup parameters that may be defined in MSSQL 2005 for the remote database might make it behave in this manner in one instance and not the other? TIA in advance for any thoughts/assistance.
DT
I'm doing DTS and need to write a SQL Query for what data have to move and what data have to deleted
I have many tables need to difference query. this one is one of tables
Table-Account0
column EAIndex �BillerCode�ChainCode�PostDate�PostAmount�BalanceDate�BillBegDate�BillEndDate�BillCount�ChAmount
Table-Biller
CompanyCode�BilerCode�BillerName�UniformNo�BusCode�AcctNo�BillerInfoList
Table-DataBackup
column CompanyCode�Keepmonth
when I'm doing SQL DTS, in Table Account0 , I need to select the data which BalanceDate is < today's Date-6
---------------------------------------------------------------------------------------------------------------------
my sql query is below . but it didn't works , I must did somehing wrong with this query pleae point me to correct it
SELECT ZT_EAccount0.*, ZT_DataBackup.KeepMonthFROM ZT_EAccount0 INNER JOIN ZT_Biller ON ZT_EAccount0.BillerCode = ZT_Biller.BillerCode CROSS JOIN ZT_DataBackup on ZT_EAccount0.BalanceDate < getdate()-6
-----------------------------------------------------------------------------------------------------------------------
thank you very much
I was wondering if there is any performance difference between creating an actual table in a DB and inserting records in a Stored Procedure vs. creating a temp table in the Stored Procedure (i.e. CREATE TABLE #MyTempTable .....) and inserting records.I need to create one of those massive "everything in the database, hundreds of pages ", overview reports, which consists of about 40 elements of caclulated data per product. It will be three levels deep:Generic Example:1. Calculated data elements for Cars.2. Calculated data elements for all of a Car's Parts.3. Calculated data elements for all of a Car's Part's Components.Example Report Format:Product Curr 12 Months Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec YTD PrevYtd %Change--------------------------------------------------------------------------------------------------------------------------------------------------Car1 Element1 Element2 Element3Car Part1 Element1 Element2Car Part2 Element1 Element2Car Part3 Element1 Element2Car PartN Element1 Element2 Car Part Element1 Car Part Element2 Car Part Element3 Car Part ElementN------------------------------------------Car2 Element1 Element2 Element3... etc As of now, I completed part 1 above, and the SP takes about 10 minutes to run. It is using a T-SQL created temp table (#MyTempTable). I was wondering, before I recode anything, if anyone knows if my SP will run faster if I actually create the table in the DB instead? I figure that once I complete parts 2 and 3 above, the SP could take 45 minutes to run.
View 11 Replies View RelatedHi,
Are there any significant performance benefit if we avoid temp tables?
Are the temp tables bad for good performance of queries?
Is it better to create table ,then use it after that drop it ,rather then using temp tables?
Any comments would be greatly appreciated.
How to backup table in sql server 2005
SQL IN Minds