Syntax Error On Where Clause

Feb 6, 2005

I have the code below and the where clause is giving me errors, I have already setup FT Index, I think the error is lack of ' or " or "" or some kinda syntax pls help... as I can figure it out





I passed the word MBAISE











where CONTAINS(*, '+@searchstring+' )








Declare @myStatement varchar(8000)


Declare @LastRec int


Declare @FirstRec int


SELECT @FirstRec = (@CurrentPage - 1) * @PageSize


SELECT @LastRec =(@CurrentPage * @PageSize + 1 )





SELECT @myStatement = ' SELECT SalaryStatistical, EmployerID,JobLocation, location, SectorID


FROM #TEMP





where CONTAINS(*, '+@searchstring+' )





AND (LastLogin >= dateadd(d, -' + @HowManyDays + ', getdate())


AND (ID > '+ convert(varchar(20),@FirstRec) +')


AND (ID < '+convert(varchar(20),@LastRec) +')


AND (SalaryStatistical > '+ convert(varchar(20),@SalaryStatistical)+')





'


IF @JobLocation != @myzero





BEGIN


SELECT @myStatement = @myStatement + ' AND (JobLocation IN ('+convert(varchar(90),@JobLocation)+')) '


END





IF @sectorID != @myzero


BEGIN


SELECT @myStatement = @myStatement + ' AND (SectorID IN ('+convert(varchar(90),@sectorID)+')) '


END





SELECT @myStatement = @myStatement


print @myStatement





exec(@myStatement)








GO

View 1 Replies


ADVERTISEMENT

Syntax Error In FROM Clause - Help Needed Please!!

Jun 8, 2008

 Hi all,I am a newbie to asp and have been using VWD to make a database for an assignment but I am having big problems trying to extract some data to a datalist view. I intend to use this page to display all information of hotel rooms. I know its probably really obvious to some of you but its driving me mad!!! Any help would be greatly appreciated.     Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)        Dim ds As New DataSet()        Dim sGetRooms As String = "SELECT RoomID, RoomType, " _          & "RoomName FROM Rooms2 " _          & "WHERE RoomType LIKE @RoomType " _          & "ORDER BY RoomType"        Dim sGetroomsizeandprice As String = "SELECT ID, RoomSize, RoomPrice, @RoomType " _          & "FROM roomprices JOIN Rooms2 ON Rooms2.ID = roomprices.ID " _          & "WHERE RoomType LIKE @RoomType " _          & "ORDER BY RoomPrice"        Dim sConnect As String = ConfigurationManager.ConnectionStrings("White Sand's Hotel - Dan MahilConnectionString").ConnectionString        Using con As New OleDbConnection(sConnect)            Dim da As New OleDbDataAdapter(sGetRooms, con)            Dim param As New OleDbParameter("RoomType", OleDbType.VarChar, 10)            param.Value = Request.QueryString("RoomType") & "%"            da.SelectCommand.Parameters.Add(param)            Try                da.Fill(ds, "Rooms2")                da.SelectCommand.CommandText = sGetroomsizeandprice                da.Fill(ds, "roomprices")            Catch ex As Exception                Label4.Text = "ERROR: " & ex.Message                Exit Sub            End Try        End Using        Dim pkcol As DataColumn = ds.Tables("Room2").Columns("RoomID")        Dim fkcol As DataColumn = ds.Tables("roomprices").Columns("ID")        Dim dr As New DataRelation("MenuLink", pkcol, fkcol)        ds.Relations.Add(dr)        DataList1.DataSource = ds        DataList1.DataMember = "Rooms2"        DataList1.DataBind()    End Sub  

View 2 Replies View Related

Syntax Error When Building Up A Where Clause In Stored Procedure

Aug 9, 2006

Can anyone tell me why the line highlighted in blue produces the following error when I try to run this stored proc? I know the parameters are set properly as I can see them when debugging the SP.
I'm using this type of approach as my application is using the objectdatasource with paging. I have a similar SP that doesn't have the CategoryId and PersonTypeId parameters and that works fine so it is the addition of these new params that has messed up the building of the WHERE clause
The Error is: "Syntax error converting the varchar value '  WHERE CategoryId = ' to a column of data type int."
Thanks
Neil
CREATE PROCEDURE dbo.GetPersonsByCategoryAndTypeByName (@CategoryId int, @PersonTypeId int, @FirstName varchar(50)=NULL, @FamilyName varchar(50)=NULL, @StartRow int, @PageSize int)
AS
Declare @WhereClause varchar(2000)Declare @OrderByClause varchar(255)Declare @SelectClause varchar(2000)
CREATE TABLE #tblPersons ( ID int IDENTITY PRIMARY KEY , PersonId int , TitleId int NULL , FirstName varchar (50)  NULL , FamilyName varchar (50)  NOT NULL , FullName varchar (120)  NOT NULL , AltFamilyName varchar (50)  NULL , Sex varchar (6)  NULL , DateOfBirth datetime NULL , Age int NULL , DateOfDeath datetime NULL , CauseOfDeathId int NULL , Height int NULL , Weight int NULL , ABO varchar (3)  NULL , RhD varchar (8)  NULL , Comments varchar (2000)  NULL , LocalIdNo varchar (20)  NULL , NHSNo varchar (10) NULL , CHINo varchar (10)  NULL , HospitalId int NULL , HospitalNo varchar (20)  NULL , AltHospitalId int NULL , AltHospitalNo varchar (20)  NULL , EthnicGroupId int NULL , CitizenshipId int NULL , NHSEntitlement bit NULL , HomePhoneNo varchar (12)  NULL , WorkPhoneNo varchar (12)  NULL , MobilePhoneNo varchar (12)  NULL , CreatedBy varchar(40) NULL , DateCreated smalldatetime NULL , UpdatedBy varchar(40) NULL , DateLastUpdated smalldatetime NULL, UpdateId int )
SELECT @OrderByClause = ' ORDER BY FamilyName, FirstName'
SELECT @WhereClause = '  WHERE CategoryId = ' +  @CategoryId + ' AND PersonTypeId = ' + @PersonTypeIdIf NOT @Firstname IS NULLBEGIN SELECT @WhereClause = @WhereClause + ' AND FirstName LIKE ISNULL(''%'+ @FirstName + '%'','''')'ENDIf NOT @FamilyName IS NULLBEGIN SELECT @WhereClause = @WhereClause + ' AND (FamilyName LIKE ISNULL(''%'+ @FamilyName + '%'','''') OR AltFamilyName LIKE ISNULL(''%'+ @FamilyName + '%'',''''))'END
Select @SelectClause = 'INSERT INTO #tblPersons( PersonId, TitleId, FirstName, FamilyName , FullName, AltFamilyName, Sex, DateOfBirth, Age, DateOfDeath, CauseOfDeathId, Height, Weight, ABO, RhD, Comments, LocalIdNo, NHSNo, CHINo, HospitalId, HospitalNo, AltHospitalId, AltHospitalNo, EthnicGroupId, CitizenshipId, NHSEntitlement, HomePhoneNo, WorkPhoneNo, MobilePhoneNo, CreatedBy, DateCreated, UpdatedBy, DateLastUpdated, UpdateId)
SELECT  PersonId, TitleId, FirstName, FamilyName , FullName, AltFamilyName, Sex, DateOfBirth, Age, DateOfDeath, CauseOfDeathId, Height, Weight, ABO, RhD, Comments, LocalIdNo, NHSNo, CHINo, HospitalId, HospitalNo, AltHospitalId, AltHospitalNo, EthnicGroupId, CitizenshipId, NHSEntitlement, HomePhoneNo, WorkPhoneNo, MobilePhoneNo, CreatedBy, DateCreated, UpdatedBy, DateLastUpdated, UpdateId
 FROM vw_GetPersonsByCategoryAndType '
EXEC (@SelectClause + @WhereClause +@OrderByClause)

View 1 Replies View Related

CTE Error: Incorrect Syntax Near The Keyword 'with'. If This Statement Is A Common Table Expression Or An Xmlnamespaces Clause,

Aug 3, 2006

I am having this error when using execute query for CTE

Help will be appriciated

View 9 Replies View Related

Incorrect Syntax Near WHERE Clause

May 14, 2007

 <asp:SqlDataSource ID="productsUpdate" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionStringAccountType %>"
SelectCommand="SELECT [ProductID], [ProductName], [ImageTitle], [ImageData], [ImageMimeType] FROM [Products] WHERE [ProductID] = @ProductID"
UpdateCommand="UPDATE [Products] SET [ImageTitle] = Null, [ImageData] = Null, [ImageMimeType] = Null WHERE [ProductID] = @ProductID" InsertCommand="INSERT INTO [Products] ([ImageTitle], [ImageData], [ImageMimeType]) VALUES (@ImageTitle, @ImageData, @MimeType) WHERE ([ProductID] = @ProductID)">
<SelectParameters>
<asp:ControlParameter ControlID="GridView1" Name="ProductID" PropertyName="SelectedValue"
Type="Int32" />
</SelectParameters>
<UpdateParameters>
<asp:Parameter Name="ImageTitle" />
<asp:Parameter Name="ImageData" Type="string" />
<asp:Parameter Name="MimeType" Type="string" />
</UpdateParameters>
<InsertParameters>
<asp:Parameter Name="ImageTitle" Type="String" />
<asp:Parameter Name="ImageData" />
<asp:Parameter Name="MimeType" Type="String" />
</InsertParameters>
</asp:SqlDataSource> Hi Guys, new to development using visual studio and vb.net 2.0. and SQL express. Have a small problem.I have an update command which im using to change the values of a blob image table to NULL so that i can then insert a new image into the table. This works fine. My problem is that my insert statement has an error and i cant figure this out. if i dont add the where clause it works fine but inserts the new image into the table without the product data, i want to insert the new image into the existing product information.   The error message i keep getting is "incorrect syntax near where"Any help would be greatly appreciatedThanks

View 7 Replies View Related

Syntax Help With Orderid % 2 = 1 In WHERE Clause

Nov 6, 2007

I started reading a very informative book (Inside Microsoft SQL Server 2005: T-SQL Querying) that uses the following example.SELECT orderid, customerid,
COUNT(*) OVER(PARTITION BY customerid) AS num_orders
FROM dbo.Orders
WHERE customerid IS NOT NULL
AND orderid % 2 = 1;
Being new to T-SQL, I don't understand what is going on in the last line "orderid % 2 = 1". I tried searching "Books On Line" with no answer. Is there a good reference or textbook out there I can use to find the answers to specific syntax questions?

View 3 Replies View Related

ANSI-92 Inner Join Vs. Where Clause Syntax

Jan 11, 2005

Having problems rewriting my join condition using the "inner join" syntax.

My query, working with an intersection table:

SELECT Description, EmailAddress
FROM Accounts_Roles r, Accounts_Users u, Accounts_UserRoles ur
WHERE
r.RoleID = ur.RoleID
AND
u.UserID = ur.UserID

This works fine, but i want to write it using 'inner join' style, so I tried:

SELECT Description, EmailAddress
FROM Accounts_Roles r, Accounts_Users u
INNER JOIN Accounts_UserRoles ur
ON
r.RoleID = ur.RoleID
AND
u.UserID = ur.UserID

which gives me an error (The column prefix 'r' does not match with a table name or alias name used in the query.)

Any ideas as to how I'm screwing this up would be appreciated.

Thanks,
Gordon Z

View 3 Replies View Related

Syntax For WHERE Clause For Access Database

Oct 17, 2006

I have used this query statement with a SQL Server 2005 database and need to use something similar with an Access database:

SELECT products.*, Category AS Expr1
FROM products
WHERE (Category = @Category)

When I test this in a table adapter there is no preview due to lack of parameter. I seem to recall that Access uses different syntax in the WHERE filter clause (i.e., not @). Can someone help me out with this?

View 3 Replies View Related

'Include Clause' In Create Index Syntax

Mar 26, 2008

What is the equivalent for INCLUDE clause (in Create index syntax) in SQL Server 2000.
SQL Server 2005 will support Include clause in Create index syntax . How to attain it in SQL Server 2000

Example : I have below query executable in SQL Server 2005

CREATE INDEX Index_Name ON mytable(col1 ASC) INCLUDE (name,id);

What is the equivalent for the above query in SQL server 2000

Thanks ,
Sushma

View 1 Replies View Related

Sql Syntax For Multiple Likes Phrases In Where Clause

Nov 16, 2007



You know how you can go:



Code Block
where control_id in (11111,22222,33333,44444)




or




Code Block
where TextName in ('11111','22222','33333','44444')




and you can do this:




Code Block
where TextName like '11%' or TextName like '22%'





well how do you do this? Or can you... or can we right a function to do it... or are we just hosed writing like after like.

where TextName like in ('11%','22%',... and so on)? is anything like that possible?

or better yet
where TextName like in ( select substring(columnName, 1, 2) + '%' from whatever )

can you imagine the dynamics if that syntax actually worked?

Can a function be written to mimic this functionality? so I can do something like this:
where TextName = function('11%,22%,33%')

View 13 Replies View Related

Transact SQL :: Finding Syntax To Combine IN And CASE In A WHERE Clause?

Oct 29, 2015

I cannot seem to find the syntax to combine IN + CASE in a WHERE clause

WHERE
ses.BK_MS_SESSION <= '2015-03'
AND vis.CAT_DRAW_STATUS =
(CASE ses.BK_MS_SESSION
WHEN '2015-03' THEN vis.CAT_DRAW_STATUS
ELSE
CASE stat.BK_MS_VISIT_STATUS
WHEN 'T' THEN 'X'
ELSE vis.CAT_DRAW_STATUS
END
END
) IN ('D','R')

View 7 Replies View Related

ERROR [42000] [Lotus][ODBC Lotus Notes]Table Reference Has To Be A Table Name Or An Outer Join Escape Clause In A FROM Clause

May 27, 2008

I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error


ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause


I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.

View 1 Replies View Related

ERROR [42000] [Lotus][ODBC Lotus Notes]Table Reference Has To Be A Table Name Or An Outer Join Escape Clause In A FROM Clause

May 27, 2008

I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error


ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause


I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.

View 1 Replies View Related

ERROR:Syntax Error Converting Datetime From Character String. With Stored Procedure

Jul 12, 2007

Hi All,





i have migrated a DTS package wherein it consists of SQL task.

this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.



But the SP can executed in the client server. can any body help in this regard.





Thanks in advance,

Anand

View 4 Replies View Related

Getting Server Error Syntax Error Converting The Nvarchar Value 'Sonoma' To A Column Of Data Type Int.

Apr 20, 2007

Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
 And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
 1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24

 
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07

View 2 Replies View Related

Execute SQL Task: Executing The Query Exec (?) Failed With The Following Error: Syntax Error Or Access Violation. Possible F

Jan 23, 2008

Hi,
I'm having an SSIS package which gives the following error when executed :

Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server

The package has a single Execute SQL task with the properties listed below :

General Properties
Result Set : None

ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False

Parameter Mapping Properties

variableName Direction DataType ParameterName

User::AddLinkSql Input Varchar 0


'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'

When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"

I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.

I would appreciate if anybody can help me out of this issue by suggeting where the problem is.

Thanks in Advance.

View 12 Replies View Related

Error 241: Syntax Error Converting Datetime From Character String

Jan 7, 2004

Hi All, can someone help me,
i've created a stored procedure to make a report by calling it from a website.
I get the message error "241: Syntax error converting datetime from character string" all the time, i tryed some converting things but nothig works, probably it is me that isn't working but i hope someone can help me.
The code i use is:


CREATE proc CP_Cashbox @mID varchar,@startdate datetime,@enddate datetime
as
set dateformat dmy
go
declare @startdate as varchar
declare @enddate as varchar

--print "query aan het uitvoeren"

select sum(moneyout) / sum(moneyin)*100 as cashbox
from dbo.total
where machineID = '@mID' and njdate between '@startdate' and '@enddate'
GO



Thanx in front
Cya

View 14 Replies View Related

Snapshot Agent Gives Error: Line38: Syntax Error Near 'tabl'

Oct 1, 2005

Hi all,

View 4 Replies View Related

Alter Table Syntax Error - Anyone Sees The Error?

Nov 24, 2004

Hello,

the following alter table statement:

ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL PRIMARY KEY NONCLUSTERED

is answered with:

Server: Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'PRIMARY'.

which I consider to be interesting. Anyone has an idea why? I checked documentation but I do not see an error.

Note that:

ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL

DOES get executed, and

ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL PRIMARY KEY

produces the same error.

Now, in my understanding this has nothing to do with an index may already exist etc. - the eror indicates a SYNTAX error, before any checking. Makes no sense to me, though, reading the documentation.

So - anyone an idea?

View 4 Replies View Related

Error 0: Syntax Error Or Access Violation

Aug 1, 2004

Hi,
I'm writing a stored procedure and when I click on the Check Syntax button its giving me the error in the subject. I'm not really sure whats wrong with this. Here is my Stored Procedure code. Any help wud be appreciated.


CREATE PROC CabsSchedule_Insert
{
@JulianDatesmallint,
@SiteCodesmallint,
@CalendarDaysmallint,
@BillPeriodsmallint,
@WorkDaysmallint,
@CalDayBillRcvd varchar(30),
@Remarksvarchar(50)
}
AS
INSERT INTO CabsSchedule
(JulianDate, SiteCode, CalendarDay, BillPeriod, WorkDay, CalDayBillRcvd, Remarks)
VALUES
(@JulianDate, @SiteCode, @CalendarDay, @BillPeriod, @WorkDay, @CalDayBillRcvd, @Remarks)


Thanks,

View 2 Replies View Related

ERROR ON CLAUSE

May 19, 2008

Hi,

When I run this:

SELECT DISTINCT
property.parcel_number, property.id, property.eff_from_date, property.eff_to_date, property.situs_address_id, legal_lines.legal_desc_line,
tax_code_area.tca_number, usecd.value, ct.code_description, property_char.value AS Expr1, property.property_status_cd, legal_description.section,
legal_description.township, legal_description.range, legal_description.eff_from_date AS Expr2, legal_description.eff_to_date AS Expr3,
property.pact_code
FROM property LEFT OUTER JOIN
legal_description INNER JOIN
legal_lines ON legal_description.id = legal_lines.legal_id ON property.id = legal_description.property_id AND legal_lines.line_nr = 1

AND
(legal_description.eff_to_date IS NULL OR
legal_description.eff_to_date >= today) AND legal_description.eff_from_date <= today LEFT OUTER JOIN
property_char ON property.id = property_char.property_id AND property_char.prop_char_typ_code = 'SIZE' AND
property_char.tax_year = '2008' LEFT OUTER JOIN
property_char AS usecd INNER JOIN
code_table AS ct ON usecd.value = ct.code_table_cd ON property.id = usecd.property_id AND usecd.prop_char_typ_code = 'USECD' AND
ct.code_category_id = '35' AND usecd.tax_year = '2008' CROSS JOIN
tax_code_area INNER JOIN
prop_valuation ON property.id = prop_valuation.property_id AND tax_code_area.id = prop_valuation.tca_id AND
prop_valuation.tax_year = '2008'

WHERE (property.eff_to_date IS NULL OR
property.eff_to_date >= today) AND (property.eff_from_date <= today) AND (property.pact_code <> 'PERS')

I keep on geting an Error sayin: An ON clasue has an invalid table reference. I have looked it over so mnay times. Any help will be very helpful.

Thanks

View 3 Replies View Related

SQL Query Error With The AS Clause...

Dec 13, 2006

I got SQL Query error with this sql statement....


Code:


sSQL = "SELECT VIN, Year, MakeID AS 'Make', ModelID AS 'Model', Name AS 'Dealer', PhoneOne AS 'Phone', StockDate AS 'Stock Date', SoldDate AS 'Sold Date', RepairCost AS 'Repair Cost' FROM "
sSQL = sSQL & sView
sSQL = sSQL & " WHERE VIN = '" & sVIN & "'"



The error I got is invalid column 'MakeID' and invalid column 'ModelID'. I'm not familiar with the term "AS" in SQL so can anyone explain what's the problem here?

View 3 Replies View Related

Error In Group By Clause...

Apr 12, 2007

When trying to build a report in sql server 2005 business intelligence dev studio (to deploy to report server) based on the following query I get an error msg.

Error in group by clause.
Unable to parse query text.

SELECT sub.*, ap.apat_code
FROM k_apptreg ap,
(SELECT R.REFL_DATE, R.EVENT_NO, C.PREFERRED_NAME, C.SURNAME, R.ANNLAPPT_DATE, R.CLNP_CODE, P.SURNAME AS CLINICIAN,
R.DEPT_CODE, D .DEPT_TITLE, R.PT_CODE, R.REFLREAS_DESC, R.HOSP_CODE, R.REFP_CODE, MAX(A.APPT_DATE)
AS LAST_APPT
FROM ORACARE.K_REFLREG R, ORACARE.K_CPIREG C, ORACARE.K_DEPTLIST D, ORACARE.K_PROFREG P, ORACARE.K_APPTREG A
WHERE R.PT_CODE = C.PT_CODE AND R.DEPT_CODE = D .DEPT_CODE AND R.HOSP_CODE = D .HOSP_CODE AND
R.CONS_MD_CODE = P.MPROF_CODE AND R.EVENT_NO = A.EVENT_NO (+) AND (R.ANNLAPPT_DATE < :PARAM1) AND
a.xtend_ind = 'Y'
GROUP BY R.REFL_DATE, R.EVENT_NO, C.PREFERRED_NAME, C.SURNAME, R.ANNLAPPT_DATE, R.CLNP_CODE, P.SURNAME, R.DEPT_CODE,
D .DEPT_TITLE, R.PT_CODE, R.REFLREAS_DESC, R.HOSP_CODE, R.REFP_CODE
ORDER BY r.event_no) sub
WHERE ap.event_no (+) = sub.event_no AND sub.last_appt = ap.appt_date (+) AND xtend_ind = 'Y'
ORDER BY sub.annlappt_date

View 2 Replies View Related

Error In Use Of Order By In Over Clause

Sep 13, 2007



Hi,
I am getting a wierd error while using order by in the over clause. Consider the following query:

select count (*) over (order by STD_CLL_CNTR_KEY) as cnt

from FCT_CLL_CS_DTLS

The error reported is :

Msg 156, Level 15, State 1, Line 2

Incorrect syntax near the keyword 'order'.

But at the same time this particular query seems to be working fine:

select rank () over (order by STD_CLL_CNTR_KEY) as cnt

from FCT_CLL_CS_DTLS


Am I missing something fundamental or is there a bigger issue.

Thanks in advance,

Regards,
Emil

View 3 Replies View Related

SQL Syntax Error

Apr 7, 2007

Hi Guys, I'm hoping somebody can help me with this really frustrating problem that I'm having.......
 I'm developing a peer to peer file sharing application (final year degree project) in which I use a web service & sql database as the management server. For some strange reason, I'm getting an SQL syntax error on some machines but not on others when I call the method to submit a file list to the server (see below for code for the method). Another strange thing is that on different machines, I'm getting a different error. I've seen "incorrect syntax near 'd' ". and also "incorrect syntax near 've' ", while on two other machines it works just fine - It appears that the connection to the webservice and to the database is working just fine on all machines as before this method I have a login which works perfectly and the data is represented in the database.
Does anybody have any pointers or even the slighest idea what can cause an error like this or have seen anything like this before. Hoping to get this sorted pretty soon as the deadline is nearing. All and any help is very much appreciated!!!!
Kevin
public void submitFiles(FileObject[] files, string peerID)
{
foreach (FileObject fo in files)
{ System.Text.StringBuilder submit = new System.Text.StringBuilder("INSERT INTO SharedFiles (FileID, FileName, FileType, FileSize, PeerID) VALUES ('" + fo.guid.ToString() + "', '" + fo.name + "' ,'" + fo.name + "', '" + fo.size + "', '" + peerID + "')");
SqlConnection con = new SqlConnection(connectionString);
SqlCommand cmd = new SqlCommand(submit.ToString(), con);
try { con.Open();
cmd.ExecuteNonQuery();
 } finally { con.Close(); } 
}
 }

View 2 Replies View Related

SQL Syntax Error

Aug 8, 2007

Hello, I have this sql quiery: sqlcommand2.CommandText = "Select Count(UserIP) From InboundTraffic Where InboundURL Contains('" & SiteDomain(i).ToString & "') and DateTimeReceived > " & Last30Days

 
SiteDomain is placing a string variable such as website.com and Last30Days is a date variable which = now - 30days
Im getting this error "Syntax error (missing operator) in query expression 'InboundURL Contains('website.com') and DateTimeReceived > 7/9/2007 8:20:30 PM'"
 
What am I mising?  THANKS!

View 5 Replies View Related

Syntax Error

Jan 17, 2008

Could someone help me with this error message:
Syntax error converting the varchar value '180 Ways to Walk the Leadership Talk by John Baldoni' to a column of data type int.
Getting error on the Titles.title column.  Tried casting it but it still does not work.  What am I missing? 
CREATE procedure GetRequestInfo@Requestorid int
ASselect distinct requestors.Requestorid, CAST(Titles.title AS VARCHAR(255)), requestors.requestorEmail,Requestors.requestdate, fname, lname, phonenum,StreetAddress1, City, State, Zip,LibraryRequest.ShipDate,LibraryRequest.DueDate,LibraryRequest.ReturnDate,
Cast(DATEPART(m, requestors.requestDate) as Varchar(5)) + '/' +Cast(DATEPART(d, requestors.requestDate) as Varchar(5)) + '/' + Cast(DATEPART(yy, requestors.RequestDate) as Varchar(5)) as 'RequestDate'
from Requestorsjoin Titles on titles.Titleid = requestors.Titleidjoin libraryRequest on LibraryRequest.Titleid = LibraryRequest.Titleidwhere Requestors.requestorid = requestors.requestoridGO

View 2 Replies View Related

Syntax Error In IF ELSE

Apr 17, 2008

Can anyone tell me why I get a syntax error on the THEN and the ELSE?
@Start datetime,@End datetime,@EmailAck bit,@SelectedProcess nvarchar(25)ASBEGINIF @SelectedProcess = 'Monthly' THENUPDATE tblReminderSchedule SETPrintedDate=GETDATE(),[Status]=1FROM  tblReminderSchedule INNER JOIN  tbllOAN ON tblReminderSchedule.lOAN_ID = tbllOAN.lOAN_IDWHERE (tblReminderSchedule.ReminderDate BETWEEN @Start AND @End) AND (dbo.tblReminderSchedule.ReceivedDate IS NULL) AND   (tbllOAN.ReminderByEmail = @EmailAck) AND (tbllOAN.Frequency = 'Monthly')ELSEUPDATE tblReminderSchedule SETPrintedDate=GETDATE(),[Status]=1FROM  tblReminderSchedule INNER JOIN  tbllOAN ON tblReminderSchedule.lOAN_ID = tbllOAN.lOAN_IDWHERE (tblReminderSchedule.ReminderDate BETWEEN @Start AND @End) AND (dbo.tblReminderSchedule.ReceivedDate IS NULL) AND   (tbllOAN.ReminderByEmail = @EmailAck) AND (tbllOAN.Frequency <> 'Monthly')END 

View 4 Replies View Related

Syntax Error

Mar 21, 2004

I am trying to open a table in my DB to check for login ids:

The code I used is below> I will appreciate any help on this matter

<CODE>
Public Function Authorize(ByVal Username As String, ByVal Password As String) As Integer
Dim sql As String
Dim con As New SqlConnection("data source=localhost; initial catalog=Jasist; Integrated Security = SSPI")
sql = "Select * from USER Where User_Name = '" & Username & "' and User_Passwd = '" & Password & "'"
con.Open()
Dim cmd As New SqlCommand(sql, con)
Dim Id1 As Integer
Dim dr As SqlDataReader = cmd.ExecuteReader
If dr.Read Then
Id1 = 1
con.Close()
dr.Close()
Return Id1
Else
con.Close()
dr.Close()
Return 0
End If
End Function
<CODE>



THE ERROR GENERATED WAS->

Server Error in '/Jasist' Application.
--------------------------------------------------------------------------------

Incorrect syntax near the keyword 'USER'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'USER'.

Source Error:


Line 19: con.Open()
Line 20: Dim cmd As New SqlCommand(sql, con)
Line 21: Dim Id1 As Integer
Line 22: Dim dr As SqlDataReader = cmd.ExecuteReader
Line 23:


Source File: C:InetpubwwwrootJasistClass1.vb Line: 21



--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573

View 2 Replies View Related

Syntax Error

Mar 27, 2001

Hi, hope someone can spend a minute checking out my script error. The following is part of my SQL statement. It has got syntax error near "="
I was hoping the script could run 100 times and print number 1 to 100.

DECLARE @ID int
SET @id = 1
EXEC (' WHILE ' + @id + ' <= 100 ' + ' BEGIN SELECT ' + @id +
' SET ' + @id + ' = ' + @id + ' + 1 ' + ' END ' )

Any input is most welcome.


Richard

View 4 Replies View Related

Need Help With Syntax Error.

Oct 17, 2000

Can anyone tell me what is wrong with the script below?

INSERT INTO #SUBSCRIBERLIST(EMEMBER_GUID,EHBSID)SELECT (M.EMEMBER_GUID,@EHBSID)
FROM EMEMBER M WHERE M.EMEMBER_GUID = @EM_ID1 AND M.MEMBERTYPE <>1

This is the error I am getting.

Server: Msg 170, Level 15, State 1, Line 5
Line 5: Incorrect syntax near ','.


Thanks in advance.

Matt

View 1 Replies View Related

Syntax Error Near '='

Aug 31, 2004

hi
i am getting this error while running SQL query : syntax error near '='

Query is :

SELECT People.People, People.Name,
Sum(([ProjectStatusReport].[Week]), 0, ([ProjectStatusReport].[Week] = #8/27/2004#, 1, 0)) AS Created,
Sum((ProjectStatusReport.Week), 0, (ProjectStatusReport.Week = #8/27/2004#, (ProjectStatusReport.Accomplishments) Or (ProjectStatusReport.Plans), 0, 1, 0)) AS Complete,
People.email FROM Register INNER JOIN SR_Status ON Register.SR_Status = SR_Status.SR_Status
LEFT JOIN ProjectStatusReport ON Register.Register = ProjectStatusReport.Project INNER JOIN StakeHolders
ON Register.Register = StakeHolders.Register INNER JOIN People ON StakeHolders.People = People.People
WHERE SR_Status.Status='Active' AND StakeHolders.Status = 'Yes' GROUP BY People.People, People.Name, People.email
HAVING (Sum(ProjectStatusReport.Week), 0, ((ProjectStatusReport.Week) = #8/27/2004#, 1, 0) > 0))
AND Sum(ProjectStatusReport.Week),0,((ProjectStatusRep ort.Week) = #8/27/2004#,(ProjectStatusReport.Accomplishments) Or (ProjectStatusReport.Plans),0,1,0)>0
ORDER BY People.People

Any help

Regards

View 2 Replies View Related

Syntax Error

Feb 6, 2007

Hi All,

When I run the following portion of my stored procedure, I get the following error message:

Server: Msg 241, Level 16, State 1, Line 1
Syntax error converting datetime from character string.

Here is the script:

set @dttimestr = 'select @dttime = substring(convert(varchar(11),getdate(),120),1,4)+
substring(convert(varchar(11),getdate(),120),5,3)'

EXECUTE sp_executesql @dttimestr, N'@dttime datetime output', @dttime output
print @dttime

Can you please tell me how to fix it?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved