Syntax Error In INSERT INTO Statement.

Apr 7, 2008

Public DBString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Q:VoicenetRTS FolderRTS ChargesAccountscosting.mdb"
Private Sub Button13_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button13.Click
Dim connstring As New OleDbConnection(DBString)
connstring.Open()
Dim searchstring As String = "SELECT * FROM Costings1"
Dim da As New OleDbDataAdapter(searchstring, connstring)
Dim DS As New DataSet()
Dim dt As DataTable = DS.Tables("Costings1")
da.FillSchema(DS, SchemaType.Source, "Costings1")
da.Fill(DS, "Costings1")
Dim cb As New OleDbCommandBuilder(da)
da.InsertCommand = cb.GetInsertCommand
da.UpdateCommand = cb.GetUpdateCommand
Dim dr As DataRow = DS.Tables("Costings1").NewRow
dr("Key") = TextBox1.Text
dr("CODE") = TextBox2.Text
dr("Element") = TextBox3.Text
etc...
DS.Tables("Costings1").Rows.Add(dr)
da.Update(DS, "Costings1") <<<<<<<<<<<Syntax error in INSERT INTO statement.

There are no spaces in the field names.

View 9 Replies

Syntax Error On Insert Statement

Jan 11, 2007

Ok, the following four lines are four lines of code that I'm running, I'll post the code and then explain my issue:
        sqlCommand = New SQLCommand("INSERT INTO Bulk (Bulk_Run, Bulk_Totes, Bulk_Drums, Bulk_Boxes, Bulk_Bags, Bulk_Bins, Bulk_Crates) VALUES (" & RunList(x,0) & ", " & Totes & ", " & Drums & ", " & Boxes & ", " & Bags & ", " & Bins & ", " & Crates & ")", Connection)        sqlCommand.ExecuteNonQuery()        sqlCommand = New SQLCommand("INSERT INTO Presort (Presort_Run, Presort_Totes, Presort_Drums, Presort_Boxes, Presort_Bags, Presort_Bins, Presort_Crates) VALUES (" & RunList(x,0) & ", " & Totes & ", " & Drums & ", " & Boxes & ", " & Bags & ", " & Bins & ", " & Crates & ")", Connection)        sqlCommand.ExecuteNonQuery()
The two tables (Bulk & Presort) are <b>exactly</b> the same. This includes columns, primary keys, IDs, and even permissions. If I run the last two liens (the INSERT INTO Presort) then it works fine without error. But whenever I run the first two lines (the INSERT INTO Bulk) I get the following error:
Incorrect syntax near the keyword 'Bulk'.
Anyone have any ideas, thanks

View 2 Replies View Related

Syntax Error On INSERT Statement

Dec 16, 2005

Here is my insert statement: StringBuilder sb = new StringBuilder(); sb.Append("INSERT INTO patients_import_test "); sb.Append("(Referral_Number,Referral_Date,FullName,Patient_ien,DOB,FMP,SSN_LastFour,Race_Id,PCM,Age) "); sb.Append("VALUES(@rnum,@rdate,@fname,@patid,@birthDate,@fmp,@ssan,@race,@pcm,@age) "); sb.Append("WHERE Referral_Number NOT IN ( SELECT Referral_Number FROM patients_import_test )");I'm getting an "Incorrect syntax near the keyword 'WHERE'".If I remove the WHERE clause the INSERT statement work fine.

View 3 Replies View Related

Insert Into Statement Syntax Error

May 30, 2006

Hi,

I have a problem as shown below

Server Error in '/ys(Do Not Remove!!!)' Application.

Syntax error in INSERT INTO statement.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.OleDb.OleDbException: Syntax error in INSERT INTO statement.

Source Error:

Line 8: <Script runat="server">
Line 9: Private Sub InsertAuthorized(ByVal Source As Object, ByVal e As EventArgs)
Line 10: SqlDataSource1.Insert()
Line 11: End Sub ' InsertAuthorized
Line 12: </Script>
Source File: C:Documents and SettingsDream_AchieverDesktopys(Do Not Remove!!!)Authorizing.aspx Line: 10

Stack Trace:

[OleDbException (0x80040e14): Syntax error in INSERT INTO statement.]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +177
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +194
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +56
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +105
System.Data.OleDb.OleDbCommand.ExecuteNonQuery() +88
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +392
System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +410
System.Web.UI.WebControls.SqlDataSource.Insert() +13
ASP.authorizing_aspx.InsertAuthorized(Object Source, EventArgs e) in C:Documents and SettingsDream_AchieverDesktopys(Do Not Remove!!!)Authorizing.aspx:10
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4919

And part of my program is as shown

<Script runat="server">

Private Sub InsertAuthorized(ByVal Source As Object, ByVal e As EventArgs)

SqlDataSource1.Insert()

End Sub ' InsertAuthorized

</Script>

<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DIP1ConnectionString %>" ProviderName="<%$ ConnectionStrings:DIP1ConnectionString.ProviderName %>"

InsertCommand="Insert Into Authorize (Army ID,Tag No,Vehicle ID,Vehicle Type,Prescribed Route,Start Time, End Time) VALUES (@ArmyID, @TagNo, @VehicleID, @VehicleType, @PrescribedRoute, @StartTime, @EndTime)">

<insertparameters>

<asp:formparameter name="ArmyID" formfield="ArmyID" />

<asp:formparameter name="TagNo" formfield="TagNo" />

<asp:formparameter name="VehicleID" formfield="VehicleID" />

<asp:formparameter name="VehicleType" formfield="VehicleType" />

<asp:formparameter name="PrescribedRoute" formfield="PrescribedRoute" />

<asp:formparameter name="StartTime" formfield="StartTime" />

<asp:formparameter name="EndTime" formfield="EndTime" />

</insertparameters>

</asp:SqlDataSource>

Anybody can help? thanks

View 1 Replies View Related

System.Data.OleDb.OleDbException: Syntax Error In INSERT INTO Statement.

May 3, 2007

Hi All I'm having a bit of trouble with an sql statement being inserted into a database - here is the statement: string sql1;
sql1 = "INSERT into Customer (Title, FirstName, FamilyName, Number, Road, Town,";
sql1 += " Postcode, Phone, DateOfBirth, email, PaymentAcctNo)";
sql1 += " VALUES (";
sql1 += "'" + TxtTitle.Text + "'," ;
sql1 += "'" + TxtForename.Text + "'," ;
sql1 += "'" + TxtSurname.Text + "'," ;
sql1 += "'" + TxtHouseNo.Text + "',";
sql1 += "'" + TxtRoad.Text + "',";
sql1 += "'" + TxtTown.Text + "',";
sql1 += "'" + TxtPostcode.Text + "',";
sql1 += "'" + TxtPhone.Text + "',";
sql1 += "'" + TxtDob.Text + "',";
sql1 += "'" + TxtEmail.Text + "',";
sql1 += "'" + TxtPayAcc.Text + "')"; Which generates a statement like:INSERT into Customer (Title, FirstName, FamilyName,
Number, Road, Town, Postcode, Phone, DateOfBirth, email, PaymentAcctNo) VALUES ('Mr','Test','Test','129','Test Road','Plymouth','PL5
1LL','07855786111','14/04/1930','mr@test.com','123456') I cannot for the life of me figure out what is wrong with this statement. I've ensured all the fields within the database have no validation (this is done within my ASP code) that would stop this statement being inserted. Line 158: dbCommand.Connection = conn;Line 159: conn.Open();Line 160: dbCommand.ExecuteNonQuery();Is the line that brings up the error - I presume this could be either an error in the statement or maybe some settings on the Database stopping the values being added. Any ideas which of this might be ? I'm not looking for someone to solve this for me, just a push in the right direction! Thanks!

View 2 Replies View Related

SQL Statement Syntax Error?

Apr 22, 2008

SELECT DISTINCT CONVERT (nvarchar , tblSubject.Subject, 108) AS SubjectTime, CONVERT (nvarchar(11), tblSubject.Subject, 100) AS Date FROM tblLooker,tblSubject,tblStop WHERE NOT (SELECT DISTINCT CONVERT (nvarchar , tblSubject.Subject, 108) AS SubjectTime, CONVERT (nvarchar(11), tblSubject.Subject, 100) AS Date FROM tblSubject, tblLooker, tblStop WHERE tblSubject.Subject > tblLooker.Looker AND tblSubject.Subject < tblStop.Stop AND tblLooker.id = tblStop.id) Msg 170, Level 15, State 1, Line 5Line 5: Incorrect syntax near ')'. Can anyone tell me why this is not working? Thanks

View 1 Replies View Related

If Statement ... Syntax Error

Apr 9, 2008

hi, i've got this code

Code Snippet

go

create proc dbo.sp_GetFilterOrgIDs(@ID int)

as

select distinct

O.ID

from

Organisations O

if (@ID != 0)

begin

where O.ID = @ID
end

and am getting

Incorrect syntax near the keyword 'where'.

any idea why??

View 6 Replies View Related

IIF Statement Has Syntax Error...please Help...

May 20, 2008

I am trying to figure out the syntax for the following:

=iif(fields!ExtTripCount.value = 1,sum(Fields!ExtTripCount.value),0) / (count(fields!SvcCallNumber.value))* 100

I am trying to take all the trips that equal a one and divide them by the total number of service calls and then multiple them by 100 to get the percentage.

I am receiving the following errror: "The value expression refers to the field 'SvcCallNumber'. Report item expressions can only refer to fields within the current dta set scope or, if inside an aggregate, the specified data set scope...

View 3 Replies View Related

Syntax Error In UPDATE Statement.

May 2, 2008

Hi forum, im converting some code and have an issue with th following code!!! many thanks for good advice, Paul
Line 55: SQLa = "UPDATE counted SET " & y & " = " & intClick & ", total = " & intTotal & " WHERE ID = " & RSpc.Fields("pc").ValueLine 56: Conn.Execute(SQLa)
System.Runtime.InteropServices.COMException: Syntax error in UPDATE statement.
Dim SQLa As String

View 8 Replies View Related

Syntax Error In UPDATE Statement.

Apr 13, 2004

I have place a lblmessage.text = ex.Message to trace what happen and it show me a syntax error in update happen. I don't know whats wrong with my syntax. Can someone help me on this?

<%@ Page Language = "vb" Debug="true" %>
<%@ import namespace= "system.data" %>
<%@ import namespace= "system.data.oledb" %>
<script runat="server">

'set up connection
dim conn as new oledbconnection _
("provider = microsoft.jet.oledb.4.0;" & _
"data source = c:aspnetdataanking.mdb")

sub page_load(sender as object, e as eventargs)
if not page.ispostback then
filldatagrid()
end if
end sub

sub submit (sender as object, e as eventargs)
'insert new data
dim i,j as integer
dim params(7) as string
dim strtext as string
dim blngo as boolean = true

j = 0

for i = 0 to addpanel.controls.count -1
if addpanel.controls(i).gettype is _
gettype (textbox) then
strtext = ctype(addpanel.controls(i), _
textbox).text
if strtext <> "" then
params(j) = strtext
else
blngo = false
lblmessage.text = lblmessage.text & _
"you forgot to enter a value for " & _
addpanel.controls (i).id & "<p>"
lblmessage.style ("forecolor")= "red"
end if
j=j+1
end if
next

if not blngo then
exit sub
end if

dim strsql as string = "INSERT INTO tblusers " & _
"(firstname, lastname, address, city, state, " & _
"zip, phone) values (" & _
"'" & params(0) & "'," & _
"'" & params(1) & "'," & _
"'" & params(2) & "'," & _
"'" & params(3) & "'," & _
"'" & params(4) & "'," & _
"'" & params(5) & "'," & _
"'" & params(6) & "')"

executestatement(strsql)
filldatagrid()
end sub

sub dgdata_edit (sender as object, e as datagridcommandeventargs)
filldatagrid(e.item.itemindex)
end sub

sub dgdata_delete (sender as object, e as datagridcommandeventargs)
dim strsql as string = "DELETE FROM tblusers " & _
"WHERE userid = " & e.item.itemindex + 1

executestatement(strsql)
filldatagrid()
end sub

sub dgdata_update (sender as object, e as datagridcommandeventargs)
if updatedatastore(e) then
filldatagrid(-1)
end if
end sub

sub dgdata_cancel (sender as object, e as datagridcommandeventargs)
filldatagrid(-1)
end sub

sub dgdata_pageindexchanged (sender as object, e as datagridpagechangedeventargs)
dgdata.databind()
end sub

function updatedatastore (e as datagridcommandeventargs) as boolean
dim i,j as integer
dim params(7) as string
dim strtext as string
dim blngo as boolean = true

j = 0

for i =1 to e.item.cells.count - 3
strtext = ctype(e.item.cells(i).controls(0), _
textbox).text
if strtext <> "" then
params(j) = strtext
blngo = true
j= j+1
else
blngo = false
lblmessage.text = lblmessage.text & _
"you forgot to enter a value<p>"
end if
next

if not blngo then
return false
exit function
end if

dim strsql as string = "update tblusers SET " & _
"Firstname.value = '" & params(0) & "'," & _
"lastname.value = '" & params(1) & "'," & _
"address.value = '" & params(2) & "'," & _
"city.value = '" & params(3) & "'," & _
"state.value = '" & params(4) & "'," & _
"zip.value = '" & params(5) & "'," & _
"phone.value = '" & params(6) & "'," & _
" WHERE Userid = " & ctype(e.item.cells(0). _
controls(1), label).text

executestatement (strsql)
return blngo
end function

sub filldatagrid (optional editindex as integer = -1)
' open connection
dim objcmd as new oledbcommand _
("select * from tblusers", conn)
dim objreader as oledbdatareader

try
objcmd.connection.open ()
objreader = objcmd.executereader()
catch ex as exception
lblmessage.text = "error retrieving from the " & _
"database."
end try

dgdata.datasource = objreader
if not editindex.equals(nothing) then
dgdata.edititemindex = editindex
end if

dgdata.databind()
objreader.close
objcmd.connection.close()

end sub

function executestatement (strsql)
dim objcmd as new oledbcommand(strsql, conn)

try
objcmd.connection.open()
objcmd.executenonquery()
catch ex as exception
lblmessage.text = ex.message
end try

objcmd.connection.close()
end function
</script>

<html><body>
<asp:label id= "lblmessage" runat ="server" />
<form runat= "server">
<asp:datagrid id = "dgdata" runat ="server"
bordercolor = "black"
gridlines="vertical"
cellpadding ="4"
cellspacing="0"
width = "100%"
autogeneratecolumns = "False"
ondeletecommand = "dgdata_delete"
oneditcommand = "dgdata_edit"
oncancelcommand = "dgdata_cancel"
onupdatecommand = "dgdata_update"
onpageindexchanged= "dgdata_pageindexchanged"
font-names = "arial"
font-size="8pt"
showfooter = "true"
headerstyle-backcolor= "#cccc99"
footerstyle-backcolor= "#cccc99"
itemstyle-backcolor= "#ffffff"
alternatingitemstyle-backcolor="#cccccc">

<columns>
<asp:templatecolumn headertext="id">
<itemtemplate>
<asp:label id = "name" runat = "server"
text = '<%# container.dataitem("userid")%>' />
</itemtemplate>
</asp:templatecolumn>

<asp:boundcolumn headertext = "firstname"
datafield = "firstname" />

<asp:boundcolumn headertext = "lastname"
datafield = "lastname" />

<asp:boundcolumn headertext = "address"
datafield = "address" />

<asp:boundcolumn headertext = "city"
datafield = "city" />

<asp:boundcolumn headertext = "state"
datafield = "state" />

<asp:boundcolumn headertext ="zip"
datafield = "zip" />

<asp:boundcolumn headertext ="phone"
datafield = "phone" />

<asp:editcommandcolumn
edittext="Edit"
canceltext="cancel"
updatetext="update"
headertext = "edit"/>

<asp:buttoncolumn headertext = "delete?" text = "X"
commandname = "delete"
buttontype = "pushbutton" />

</columns>
</asp:datagrid><p>

<asp:panel id= "addpanel" runat = "server">
<table>
<tr>
<td width ="100" valign = "top">
first and last name:
</td>
<td width ="300" valign = "top">
<asp:textbox id= "tbfname" runat = "server"/>
<asp:textbox id= "tblname" runat = "server"/>
</td>
</tr>
<tr>
<td valign = "top">address:</td>
<td valign= "top">
<asp:textbox id= "tbaddress" runat = "server"/>
</td>
</tr>
<tr>
<td valign = "top">city, state, zip:</td>
<td valign= "top">
<asp:textbox id= "tbcity" runat = "server"/>
<asp:textbox id= "tbstate" runat = "server"/>
<asp:textbox id= "tbzip" runat = "server"
size=5 />
</td>
</tr>
<tr>
<td valign= "top">phone:</td>
<td valign= "top">
<asp:textbox id= "tbphone" runat = "server"
size = 11/><p>
</td>
</tr>
<tr>
<td colspan = "2" valign = "top" allign = "right">
<asp:button id = "btsubmit" runat ="server" text ="add"
onclick = "submit" />
</td>
</tr>
</table>
</asp:panel>
</form>
</body></html>

View 14 Replies View Related

Insert Syntax Error

Mar 1, 2004

In SQL 7.0 SP3 , I am receiving this message....

Server: Msg 170, Level 15, State 1, Line 17
Line 17: Incorrect syntax near ')'.

When I try to execute this code from SQL Query Analyzer...

DECLARE @DPPNumberCursor INT
DECLARE DPPNumberCursor Cursor for Select PPAP_ID
from ppap
where ppap_cancel <> "1" and
ppap_close <> "1" and
projectonhold <> "1"

OPEN DPPNumberCursor

Fetch Next From DPPNumberCursor

INTO @dppnumbercursor

While @@Fetch_Status = 0
Begin
INSERT INTO APQPSubformTable (apqpsub_id)
Values (@dppnumbercursor)

Bsically, I want to insert the number held in @dppnumbercursor in the APQPSub_id field.

Any help would be appreciated.

View 10 Replies View Related

Insert Into Syntax Error

Mar 5, 2008

I have run into a problem with my instert satement that gives me a syntax error whenever i try and add an extra value to it.

This one works but

Code Snippet
string sqlString1 = "INSERT INTO QuoteHeader (QuoteHeaderID, CustomerID, EmployeeID) VALUES("
+ newOrderHeader
+ ",'" + custID
+ "','" + empID
+ "')";

add another value and I get a synax error And i'm not sure why.

Code Snippet
string sqlString1 = "INSERT INTO QuoteHeader (QuoteHeaderID, CustomerID, EmployeeID, Month) VALUES("
+ newOrderHeader
+ ",'" + custID
+ "','" + empID
+ "','" + textBox6.Text
+ "')";

Code Snippet
try
{

cmd = new OleDbCommand(sqlString1, connectCmd);
int rowsReturned = cmd.ExecuteNonQuery();
}
catch (Exception ex)
{

string s = ex.Message;
DisposeResources(ref oleDbDataAdapter, ref ds, ref connectFill, ref connectCmd, ref cmd);
return;
}

View 7 Replies View Related

Syntax Error With "alter Table" Statement

Mar 27, 2001

Folks!

What is wrong with my syntax with the following command?:

alter table EmployeeInfo alter column OriginDate smalldatetime not null default getdate()

I'm getting:

Incorrect syntax near the keyword 'default'

Currently, in my table OriginDate is nullable with no default.
Thanks in advance for your help!

APF

View 2 Replies View Related

SqlDataSource1.insert() Syntax Error!!!

Apr 12, 2007

I am so close to haveing the web page i want, but i hve a syntax error with the Public Function Insert() as Integer.
I see no reason for this
i will post the code below, any help will be appreciated
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" %>
<script runat="server">
Private Sub Submitdata(ByVal Source As Object, ByVal e As EventArgs)
SqlDataSource1.Insert()
End Sub ' Submitdata
</script>
<asp:Content ID="Content1" runat="server" ContentPlaceHolderID="ContentPlaceHolder1">
<asp:sqldatasource
id="SqlDataSource1"
runat="server"
connectionstring="<%$ ConnectionStrings:clientInfoConnectionString %>"
selectcommand="SELECT Client Name,Client Address FROM Clients"
insertcommand="INSERT INTO Clients (Client Name,Client Address) VALUES (@CName,@CAddress)">
<insertparameters>
<asp:formparameter name="CName" formfield="Namebox" />
<asp:formparameter name="CAddress" formfield="Addressbox" />
</insertparameters>
</asp:sqldatasource>
 Name:<br />
<asp:TextBox ID="Namebox" runat="server" /><br />

<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="Namebox"
ErrorMessage="Please Enter A Name"></asp:RequiredFieldValidator>

<br />Address:<br />
<asp:TextBox ID="Addressbox" runat="server" /><br />

<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" ControlToValidate="Addressbox"
ErrorMessage="Please Enter An Address"></asp:RequiredFieldValidator>

<br /><asp:Button ID="Submitbtn" runat="server" Text="Submit" OnClick="InsertShipper" />
<br />

</asp:Content>
Thanks
The King

View 10 Replies View Related

Insert Query Syntax Error

Dec 14, 2006

I cannot identify where the syntax error is, please help.

INSERT INTO [Attendence/Activity Log] (ID Number, Date, Activity, Duration) VALUES ('39', '12/14/06', 'Health & Nutrition', '2')

View 1 Replies View Related

Cannot INSERT Data To 3 Tables Linked With Relationship (INSERT Statement Conflicted With The FOREIGN KEY Constraint Error)

Apr 9, 2007

Hello
I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :

and here goes the code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70

and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"

Could You please tell me what am I missing here ?
Thanks a lot.

View 5 Replies View Related

Incorrect Syntax Near The Keyword 'EXEC' (Dynamic Sql Statement Error)

Nov 1, 2007

Following is the stored procedure iam trying to create.Here i am trying to

First create a table with the table name passed as parameter
Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows.
Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.

This table would be further used with cursor.
Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.

CREATE PROCEDURE [dbo].[sp_try]

@TempTable varchar(25)

AS

DECLARE @SQL nvarchar(MAX)

DECLARE @SQLINSERT nvarchar(MAX)

BEGIN

--create temp table

SELECT @Sql= N'CREATE TABLE ' + QUOTENAME(@TempTable) +

'(

ContactName varchar (40) NOT NULL ,

ContactId varchar (30) NOT NULL ,

ContactrMessage varchar (100) NOT NULL,

)'

EXEC sp_executesql @Sql, N'@TempTable varchar(25)', @TempTable = @TempTable

SELECT @sql= 'Select * from table'

SELECT @sqlinsert = 'INSERT INTO ' + quotename( @TempTable )

SELECT @sqlinsert = @sqlinsert + EXEC sp_executesql @sql, N'@Condition varchar(max)', @Condition=@Condition

EXEC sp_executesql @SQLINSERT, N'@TempTable varchar(25)', @TempTable = @TempTable

View 8 Replies View Related

Case Statement Error In An Insert Statement

May 26, 2006

Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.

Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);

The error I'm getting is:
Incorrect syntax near '='.

I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.

View 10 Replies View Related

CTE Error: Incorrect Syntax Near The Keyword 'with'. If This Statement Is A Common Table Expression Or An Xmlnamespaces Clause,

Aug 3, 2006

I am having this error when using execute query for CTE

Help will be appriciated

View 9 Replies View Related

Insert Statement Error

Apr 8, 2005

Hi All,

I am trying to run an insert statement and getting an error.

Insert statement:

insert into conv_owner (name,street_num,
street_direction,street_name,street_type,street_un it,
address2,city,state,city_state,zip,wphone,inservic e,
db_name,table_name)
select "Facility's Owner",null,null,null,null,null,null,null,
null,null,null,"Owner's Telephone Number",inservice,
'BKFoodProtection.mdb','FP_Master'
from fp_master

Error message:
Server: Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric.

Any idea why? Thanks.

View 6 Replies View Related

Error In Insert Statement ........Help Out

May 13, 2008

Hi
All as i have a class where i wrote a procedure for insert statement and i passed the value from the form and previously it was fine and now its giving the following error

" The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."

And
code is as follows

Code Snippet

Public Sub Purchase_Header(ByVal BillNo As VariantType, ByVal BillDate As Date, ByVal GRNNO As VariantType, ByVal GRNdate As Date, ByVal TOP As Integer, ByVal Supplier As Integer, ByVal TotalPurchasevalue As Double, ByVal TotalProductValue As Double, ByVal BillPaid As Date, ByVal BillDue As Date, ByVal NoOfSBills As Integer, ByVal noofbreceived As Integer, ByVal billstatus As Integer, ByVal paymentstatus As Integer, ByVal appstatus As Integer, ByVal recitstatus As Boolean, ByVal sbillstatus As Boolean, ByVal ccindicator As String)

connection()
myCommand = New SqlCommand("INSERT INTO Purchase_Header(PH_Voucher_Date,PH_Bill_No,PH_Bill_Date,PH_GRN_No,PH_GRN_Date,PH_Type_Of_Purchase_Id,PH_Supplier_Id,PH_Total_Purchase_Value,PH_Total_Product_Value,PH_Bill_Paid_On,PH_Bill_Due_On,PH_No_Of_Sub_Bills,PH_No_Of_Sub_Bills_Received,PH_Bill_Status,PH_Payment_Status,PH_Apportionment_Status,PH_Goods_Receipt_Status,PH_Sub_Bill_Receipt_Status,PH_Cash_Credit_Indicator,PH_Total_Tax_Paid) VALUES('" & System.DateTime.Today & "'," & BillNo & ",'" & BillDate & "'," & GRNNO & ",'" & GRNdate & "'," & TOP & "," & Supplier & "," & TotalPurchasevalue & "," & TotalProductValue & ",'" & BillPaid & "','" & BillDue & "'," & NoOfSBills & "," & noofbreceived & "," & billstatus & "," & paymentstatus & "," & appstatus & ",'" & recitstatus & "','" & sbillstatus & "' ,'" & ccindicator & "',0)", myConnection)
myCommand.ExecuteReader()

MsgBox("Data saved successfully")
myConnection.Close()
and table structure is as follows and for date types i am passing them through date variables from textbox

INSERT INTO [MoneyBee].[dbo].[Purchase_Header]
([PH_Voucher_Date]
,[PH_Bill_No]
,[PH_Bill_Date]
,[PH_GRN_No]
,[PH_GRN_Date]
,[PH_Type_Of_Purchase_Id]
,[PH_Supplier_Id]
,[PH_Total_Purchase_Value]
,[PH_Total_Product_Value]
,[PH_Bill_Paid_On]
,[PH_Bill_Due_On]
,[PH_No_Of_Sub_Bills]
,[PH_No_Of_Sub_Bills_Received]
,[PH_Bill_Status]
,[PH_Payment_Status]
,[PH_Apportionment_Status]
,[PH_Goods_Receipt_Status]
,[PH_Sub_Bill_Receipt_Status]
,[PH_Cash_Credit_Indicator]
,[PH_Total_Tax_Paid])
VALUES
(<PH_Voucher_Date, datetime,>
,<PH_Bill_No, varchar(15),>
,<PH_Bill_Date, datetime,>
,<PH_GRN_No, numeric,>
,<PH_GRN_Date, datetime,>
,<PH_Type_Of_Purchase_Id, numeric,>
,<PH_Supplier_Id, numeric,>
,<PH_Total_Purchase_Value, numeric,>
,<PH_Total_Product_Value, numeric,>
,<PH_Bill_Paid_On, datetime,>
,<PH_Bill_Due_On, datetime,>
,<PH_No_Of_Sub_Bills, numeric,>
,<PH_No_Of_Sub_Bills_Received, numeric,>
,<PH_Bill_Status, numeric,>
,<PH_Payment_Status, numeric,>
,<PH_Apportionment_Status, numeric,>
,<PH_Goods_Receipt_Status, bit,>
,<PH_Sub_Bill_Receipt_Status, bit,>
,<PH_Cash_Credit_Indicator, varchar(6),>
,<PH_Total_Tax_Paid, numeric,>)

Thanks
Avinash

View 5 Replies View Related

Error:: The Insert Statement ...

Apr 26, 2008

hi

i'm having a problem with my project we need to make for school with asp.net & c#. the problem is i'm a newbie with c#.
the project we need to make is a survey. so the problem is my first question of the survey works fine when i push the go to next it enters the data nice into my sql db and my second question loads, then I enter the answer for my second question i press go to next question and i get this error: " The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Antwoorden_Gebruikers". The conflict occurred in database "GIP_enquete", table "dbo.Gebruikers", column 'Gebruiker_ID'. " I don't know how i can fix this cause im to newbie to understand whats wrong.

here is a view of my code:

Code Snippet

using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using enqueteTableAdapters;

public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
int Vraag_ID = Convert.ToInt16(Request.QueryString["vraagid"]);
VragenTableAdapter VraagAdapter = new VragenTableAdapter();
lblVraag.Text = Convert.ToString(VraagAdapter.GeefVraag(Vraag_ID));

if (Vraag_ID == 1)
{
pnlVraag1.Visible = true;
}

if (Vraag_ID == 2)
{
pnlVraag2.Visible = true;
}

}
protected void btnVraag1_Click(object sender, EventArgs e)
{
//make a new user
GebruikersTableAdapter GebruikerAdapter = new GebruikersTableAdapter();
DateTime Moment = System.DateTime.Now;
GebruikerAdapter.GebruikerToevoegen(Moment);
int GebruikerID = Convert.ToInt16(GebruikerAdapter.GeefGebruikerID(Moment));
this.ViewState.Add("gebruiker_id", GebruikerID);

//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(1, GebruikerID, txtVraag1.Text, null);

//go to 2nd question
Response.Redirect("Default.aspx?vraagid=2", true);
}

protected void btnVraag2_Click(object sender, EventArgs e)
{
//get back the user from question 1
int GebruikerID = Convert.ToInt16(this.ViewState["gebruiker_id"]);

//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(2, GebruikerID, txtVraag2.Text, null);

when i run debug it allways stops here

//go too 3th question
Response.Redirect("Default.aspx?vraagid=3", true);
}
}

can somebody plz help me ? =(

ps: sorry for my bad english

View 3 Replies View Related

SQL Insert Statement Error That I Cannot Figure Out

Dec 11, 2004

I am receiving the following error when trying to insert values from textboxes on a registration form:

Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.

Compiler Error Message: BC30205: End of statement expected.

Source Error:

Line 19: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Line 20:
Line 21: Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Line 22: Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
Line 23: dbCommand.CommandText = queryString

My code is below. Can anyone help me figure out what is wrong with my code?

<%@ Page Language="VB" Debug="true" %>
<%@ Register TagPrefix="wmx" Namespace="Microsoft.Matrix.Framework.Web.UI" Assembly="Microsoft.Matrix.Framework, Version=0.6.0.0, Culture=neutral, PublicKeyToken=6f763c9966660626" %>
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.Data.OleDb" %>
<script runat="server">

Sub btnSubmit_Click(sender As Object, e As EventArgs)

Dim UCde as string = txtUserID.Text
Dim UserID as string = txtUserID.Text
Dim Password as string = txtPassword.Text
Dim Email1 as string = txtEmail.Text
Dim FirstName as string = txtFirstName.Text
Dim LastName as string = txtLastName.Text
Dim AdminLevel as string = dropAccountType.SelectedItem.Value

Dim connectionString As String = "server='(local)'; trusted_connection=true; database='master'"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)

Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection

Dim rowsAffected As Integer = 0
dbConnection.Open()
dbCommand.ExecuteNonQuery()
dbConnection.Close()
End Sub

Thanks for your help.

Chris

View 5 Replies View Related

Error In Insert Into Statement Access

Jan 14, 2013

Using Access 2010 and SQL Server 2012..i added a database through SSMS and added a table named tblEmployee (dbo.tblEmployee)

The table has 3 fields
LName (nvarchar(50), null)
FName (nvarchar(50), null)
Code (nvarchar(50), null)

The access table has 3 fields
FName, text
LName, text
Code, text

I found a code snippet here to insert from the Access table to the SQL table.UtterAccess Discussion Forums > Appending Access table to SQL Server table (and vice-versa) usin...The code is generating this error

Run-time error '3134':
Syntax error in INSERT INTO statement

Code:
Option Compare Database
Sub AppToSQL()
Dim strODBCConnect As String
Dim strSQL As String
'Code from:

[code]...

View 5 Replies View Related

Error:: The Insert Statement Conflicted With ..

Apr 26, 2008

View 7 Replies View Related

ERROR:- An INSERT EXEC Statement Cannot Be Nested.

May 3, 2004

HI,

WELL WE HAVE BEEN TRYING TO AUTOMATE A PROCEDURE OUT HERE,AND WE ARE TRYING TO CONVERT MOST OF THE THINGS INTO PROCEDURES.

BUT WE ARE GETTING A FEW HICCUPS. PLS HELP

THIS IS HOW IT GOES :-

CREATE PROCEDURE MY_PROC1
AS
BEGIN
ST1 .........;
ST2..........;
END

CREATE PROCEDURE MY_PROC2
AS
BEGIN

CREATE TABLE #TMP2
(COL1 DATATYPE
COL2 DATATYPE)

INSERT INTO #TMP2
EXEC MY_PROC1

ST1 .........;
ST2..........;

END

THIS PROCEDURE TOO RUNS WELL ,AFTER TAKING THE DATA FROM THE FIRST PROC IT MANIPUATES THE DATA ACCORDING TO THE CRITERIA SPECIFIED

NO PROBLEM TILL NOW.......

BUT,

CREATE PROCEDURE MY_PROC3
AS
BEGIN

CREATE TABLE #TMP3
(COL1 DATATYPE
COL2 DATATYPE)

INSERT INTO #TMP3
EXEC MY_PROC2

ST1 .........;
ST2..........;

END

THEN IT GIVES AN ERROR AS :-

"An INSERT EXEC statement cannot be nested."

CAN'T WE , FROM A PROCEDURE CALL A PROCEDURE WHICH CALLS A PROCEDURE........

WHAT IS THE NESTING LEVEL OF A PROCEDURE ?

IS THERE ANY WAY AROUND IT OR CAN IT BE DONE BY CHANGING SOME SETTINGS ?

PLS HELP ME OUT IN THIS

THANKS

View 13 Replies View Related

An INSERT EXEC Statement Cannot Be Nested Error.

Nov 28, 2005

Hi,all,When I use following sql, an error occurs:insert into #tmprepEXECUTE proc_stat @start,@endThere is a "select * from #tmp " in stored procedure proc_stat, and theerror message is :Server: Msg 8164, Level 16, State 1, Procedure proc_stat, Line 42An INSERT EXEC statement cannot be nested.What's the metter? Any help is greatly appreciated. Thanks

View 2 Replies View Related

Error Running Insert Statement In A Database

Aug 15, 2007

When I run this query against PFGDSMRISSQLQ1 in Server manager 2005:use <database>INSERT INTO dbo.<table> (<column1>, <column2>, <column3>)VALUES (12598,2900,1.00)I get this error:Msg 8624, Level 16, State 1, Line 5Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services.Can someone please help. Thanks!

View 1 Replies View Related

SELECT @@IDENTITY During INSERT STATEMENT Error

Mar 9, 2008

The following SQL statement fails on SQL CE 3.5 but works on SQL Express 2005:

"INSERT INTO BOOKINGS VALUES(@now,'"+note+"'," + p + "); SELECT @@IDENTITY;"

Compact 3.5 doesnt like the SELECT statement claiming that:

There was an error parsing the query. [ Token line number = 1,Token line offset = 72,Token in error = SELECT ]

Can anyone suggest the correct SQL to implement this via Compact? i.e. How do I retrieve the Identity value during and insert statement?

I have removed the SELECT @@IDENTITY; portion of the statement and it runs fine.

View 9 Replies View Related

SQL 2012 :: Select Permission Error On Insert Statement

Jul 28, 2015

Have run to a select permission error when attempting insert data to a table. received the following error

Msg 229, Level 14, State 5, Line 11
The SELECT permission was denied on the object 'tableName', database 'DBname', schema 'Schema'.

Few things to note
- There are no triggers depending on the table
- Permissions are granted at a roll level which is rolled down to the login
- The test environments have the same level of permission which works fine.

View 6 Replies View Related

If STATEMENT Within Select Statement Syntax

May 15, 2008

Hi,

I am a newbie to this site and hope someone can help....

I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:

if(TL_flag= '1', "yes") as [Trial Leave]

it is coming up with an error.... I can use Select case but I should not need to as this should work?

Any ideas?

View 2 Replies View Related

What's The Right Syntax Of This Sql Statement?

Jan 23, 2008

Hi,
I created a sqldatasource (sql server) and a gridview.In the aspx file, i can see the selectcommand:
SelectCommand="select email from mytable"
Now, i want to modify something in the selectcommand produced in the aspx file, in order to get the emails in clickable mode. I knwow i have to add a string like:
<a hef="mailto:mailaddress">mailadress</a>
So i tried this:
SelectCommand="select '<a href="mailto:'+ email +'">' , email + '</a>' from email
But this gives the error: "tag is not well formed".The problem is the " around mailto:
Thanks
Cl.

View 4 Replies View Related

Sql Syntax Statement

May 23, 2008

Here is an sql query but it keeps giving me an error of (Incorrect syntax near keywork ON)
here is the sql, don't get why this doe not work when I have done it this way multiple times.
select DISTINCT c.strSSN, p.sidstrNAME_IND,
p.sidstrGR_ABBR_CODE, p.sidstrSSN_SM, p.sidstrST_ADDR, p.sidstrADDR_CITY, p.sidstrSTATES_US, p.sidstrZIP_CODE, p.sidstrPAY_GR, p.sidstrMARTL_STAT,
p.sidstrNBR_EXEMPT, p.sidstrST_TAX_CODE, u.lsdbstrPHONE_NBR_HOME, case when sidstrTech_SVC_Code in ('M', 'R', 'S', 'T', 'U', 'Z') then
case when sidstrACT_STAT_PROG in ('5', 'A', 'E', 'F', 'N', 'R', 'S', 'T') then 'AGR' else 'Tech' end else 'M-Day' end
as status from tblAssignedPersonnel as c on ap.strssn = p.sidstrSSN_SM Inner Join
cms.dbo.tblLSDB as u on u.lsdbstrSSN_SM = c.strSSN inner joincms.dbo.tblSidpers as p on ap.strSSN = p.sidstrSSN_SM where intUICID = (select intUICID from tblUIC
where strUIC = '2' and intTaskForceID = '1') order by p.sidstrNAME_IND

View 3 Replies View Related