Syntax Error On INSERT Statement
Dec 16, 2005
Here is my insert statement:
StringBuilder sb = new StringBuilder();
sb.Append("INSERT INTO patients_import_test ");
sb.Append("(Referral_Number,Referral_Date,FullName,Patient_ien,DOB,FMP,SSN_LastFour,Race_Id,PCM,Age) ");
sb.Append("VALUES(@rnum,@rdate,@fname,@patid,@birthDate,@fmp,@ssan,@race,@pcm,@age) ");
sb.Append("WHERE Referral_Number NOT IN ( SELECT Referral_Number FROM patients_import_test )");
I'm getting an "Incorrect syntax near the keyword 'WHERE'".
If I remove the WHERE clause the INSERT statement work fine.
View 3 Replies
ADVERTISEMENT
Jan 11, 2007
Ok, the following four lines are four lines of code that I'm running, I'll post the code and then explain my issue:
sqlCommand = New SQLCommand("INSERT INTO Bulk (Bulk_Run, Bulk_Totes, Bulk_Drums, Bulk_Boxes, Bulk_Bags, Bulk_Bins, Bulk_Crates) VALUES (" & RunList(x,0) & ", " & Totes & ", " & Drums & ", " & Boxes & ", " & Bags & ", " & Bins & ", " & Crates & ")", Connection) sqlCommand.ExecuteNonQuery() sqlCommand = New SQLCommand("INSERT INTO Presort (Presort_Run, Presort_Totes, Presort_Drums, Presort_Boxes, Presort_Bags, Presort_Bins, Presort_Crates) VALUES (" & RunList(x,0) & ", " & Totes & ", " & Drums & ", " & Boxes & ", " & Bags & ", " & Bins & ", " & Crates & ")", Connection) sqlCommand.ExecuteNonQuery()
The two tables (Bulk & Presort) are <b>exactly</b> the same. This includes columns, primary keys, IDs, and even permissions. If I run the last two liens (the INSERT INTO Presort) then it works fine without error. But whenever I run the first two lines (the INSERT INTO Bulk) I get the following error:
Incorrect syntax near the keyword 'Bulk'.
Anyone have any ideas, thanks
View 2 Replies
View Related
May 30, 2006
Hi,
I have a problem as shown below
Server Error in '/ys(Do Not Remove!!!)' Application.
Syntax error in INSERT INTO statement.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Syntax error in INSERT INTO statement.
Source Error:
Line 8: <Script runat="server">
Line 9: Private Sub InsertAuthorized(ByVal Source As Object, ByVal e As EventArgs)
Line 10: SqlDataSource1.Insert()
Line 11: End Sub ' InsertAuthorized
Line 12: </Script>
Source File: C:Documents and SettingsDream_AchieverDesktopys(Do Not Remove!!!)Authorizing.aspx Line: 10
Stack Trace:
[OleDbException (0x80040e14): Syntax error in INSERT INTO statement.]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +177
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +194
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +56
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +105
System.Data.OleDb.OleDbCommand.ExecuteNonQuery() +88
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +392
System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +410
System.Web.UI.WebControls.SqlDataSource.Insert() +13
ASP.authorizing_aspx.InsertAuthorized(Object Source, EventArgs e) in C:Documents and SettingsDream_AchieverDesktopys(Do Not Remove!!!)Authorizing.aspx:10
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4919
And part of my program is as shown
<Script runat="server">
Private Sub InsertAuthorized(ByVal Source As Object, ByVal e As EventArgs)
SqlDataSource1.Insert()
End Sub ' InsertAuthorized
</Script>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DIP1ConnectionString %>" ProviderName="<%$ ConnectionStrings:DIP1ConnectionString.ProviderName %>"
InsertCommand="Insert Into Authorize (Army ID,Tag No,Vehicle ID,Vehicle Type,Prescribed Route,Start Time, End Time) VALUES (@ArmyID, @TagNo, @VehicleID, @VehicleType, @PrescribedRoute, @StartTime, @EndTime)">
<insertparameters>
<asp:formparameter name="ArmyID" formfield="ArmyID" />
<asp:formparameter name="TagNo" formfield="TagNo" />
<asp:formparameter name="VehicleID" formfield="VehicleID" />
<asp:formparameter name="VehicleType" formfield="VehicleType" />
<asp:formparameter name="PrescribedRoute" formfield="PrescribedRoute" />
<asp:formparameter name="StartTime" formfield="StartTime" />
<asp:formparameter name="EndTime" formfield="EndTime" />
</insertparameters>
</asp:SqlDataSource>
Anybody can help? thanks
View 1 Replies
View Related
Apr 7, 2008
Public DBString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Q:VoicenetRTS FolderRTS ChargesAccountscosting.mdb"
Private Sub Button13_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button13.Click
Dim connstring As New OleDbConnection(DBString)
connstring.Open()
Dim searchstring As String = "SELECT * FROM Costings1"
Dim da As New OleDbDataAdapter(searchstring, connstring)
Dim DS As New DataSet()
Dim dt As DataTable = DS.Tables("Costings1")
da.FillSchema(DS, SchemaType.Source, "Costings1")
da.Fill(DS, "Costings1")
Dim cb As New OleDbCommandBuilder(da)
da.InsertCommand = cb.GetInsertCommand
da.UpdateCommand = cb.GetUpdateCommand
Dim dr As DataRow = DS.Tables("Costings1").NewRow
dr("Key") = TextBox1.Text
dr("CODE") = TextBox2.Text
dr("Element") = TextBox3.Text
etc...
DS.Tables("Costings1").Rows.Add(dr)
da.Update(DS, "Costings1") <<<<<<<<<<<Syntax error in INSERT INTO statement.
There are no spaces in the field names.
View 9 Replies
View Related
May 3, 2007
Hi All I'm having a bit of trouble with an sql statement being inserted into a database - here is the statement: string sql1;
sql1 = "INSERT into Customer (Title, FirstName, FamilyName, Number, Road, Town,";
sql1 += " Postcode, Phone, DateOfBirth, email, PaymentAcctNo)";
sql1 += " VALUES (";
sql1 += "'" + TxtTitle.Text + "'," ;
sql1 += "'" + TxtForename.Text + "'," ;
sql1 += "'" + TxtSurname.Text + "'," ;
sql1 += "'" + TxtHouseNo.Text + "',";
sql1 += "'" + TxtRoad.Text + "',";
sql1 += "'" + TxtTown.Text + "',";
sql1 += "'" + TxtPostcode.Text + "',";
sql1 += "'" + TxtPhone.Text + "',";
sql1 += "'" + TxtDob.Text + "',";
sql1 += "'" + TxtEmail.Text + "',";
sql1 += "'" + TxtPayAcc.Text + "')"; Which generates a statement like:INSERT into Customer (Title, FirstName, FamilyName,
Number, Road, Town, Postcode, Phone, DateOfBirth, email, PaymentAcctNo) VALUES ('Mr','Test','Test','129','Test Road','Plymouth','PL5
1LL','07855786111','14/04/1930','mr@test.com','123456') I cannot for the life of me figure out what is wrong with this statement. I've ensured all the fields within the database have no validation (this is done within my ASP code) that would stop this statement being inserted. Line 158: dbCommand.Connection = conn;Line 159: conn.Open();Line 160: dbCommand.ExecuteNonQuery();Is the line that brings up the error - I presume this could be either an error in the statement or maybe some settings on the Database stopping the values being added. Any ideas which of this might be ? I'm not looking for someone to solve this for me, just a push in the right direction! Thanks!
View 2 Replies
View Related
Apr 22, 2008
SELECT DISTINCT CONVERT (nvarchar , tblSubject.Subject, 108) AS SubjectTime, CONVERT (nvarchar(11), tblSubject.Subject, 100) AS Date FROM tblLooker,tblSubject,tblStop WHERE NOT (SELECT DISTINCT CONVERT (nvarchar , tblSubject.Subject, 108) AS SubjectTime, CONVERT (nvarchar(11), tblSubject.Subject, 100) AS Date FROM tblSubject, tblLooker, tblStop WHERE tblSubject.Subject > tblLooker.Looker AND tblSubject.Subject < tblStop.Stop AND tblLooker.id = tblStop.id) Msg 170, Level 15, State 1, Line 5Line 5: Incorrect syntax near ')'. Can anyone tell me why this is not working? Thanks
View 1 Replies
View Related
Apr 9, 2008
hi, i've got this code
Code Snippet
go
create proc dbo.sp_GetFilterOrgIDs(@ID int)
as
select distinct
O.ID
from
Organisations O
if (@ID != 0)
begin
where O.ID = @ID
end
and am getting
Incorrect syntax near the keyword 'where'.
any idea why??
View 6 Replies
View Related
May 20, 2008
I am trying to figure out the syntax for the following:
=iif(fields!ExtTripCount.value = 1,sum(Fields!ExtTripCount.value),0) / (count(fields!SvcCallNumber.value))* 100
I am trying to take all the trips that equal a one and divide them by the total number of service calls and then multiple them by 100 to get the percentage.
I am receiving the following errror: "The value expression refers to the field 'SvcCallNumber'. Report item expressions can only refer to fields within the current dta set scope or, if inside an aggregate, the specified data set scope...
View 3 Replies
View Related
May 2, 2008
Hi forum, im converting some code and have an issue with th following code!!! many thanks for good advice, Paul
Line 55: SQLa = "UPDATE counted SET " & y & " = " & intClick & ", total = " & intTotal & " WHERE ID = " & RSpc.Fields("pc").ValueLine 56: Conn.Execute(SQLa)
System.Runtime.InteropServices.COMException: Syntax error in UPDATE statement.
Dim SQLa As String
View 8 Replies
View Related
Apr 13, 2004
I have place a lblmessage.text = ex.Message to trace what happen and it show me a syntax error in update happen. I don't know whats wrong with my syntax. Can someone help me on this?
<%@ Page Language = "vb" Debug="true" %>
<%@ import namespace= "system.data" %>
<%@ import namespace= "system.data.oledb" %>
<script runat="server">
'set up connection
dim conn as new oledbconnection _
("provider = microsoft.jet.oledb.4.0;" & _
"data source = c:aspnetdataanking.mdb")
sub page_load(sender as object, e as eventargs)
if not page.ispostback then
filldatagrid()
end if
end sub
sub submit (sender as object, e as eventargs)
'insert new data
dim i,j as integer
dim params(7) as string
dim strtext as string
dim blngo as boolean = true
j = 0
for i = 0 to addpanel.controls.count -1
if addpanel.controls(i).gettype is _
gettype (textbox) then
strtext = ctype(addpanel.controls(i), _
textbox).text
if strtext <> "" then
params(j) = strtext
else
blngo = false
lblmessage.text = lblmessage.text & _
"you forgot to enter a value for " & _
addpanel.controls (i).id & "<p>"
lblmessage.style ("forecolor")= "red"
end if
j=j+1
end if
next
if not blngo then
exit sub
end if
dim strsql as string = "INSERT INTO tblusers " & _
"(firstname, lastname, address, city, state, " & _
"zip, phone) values (" & _
"'" & params(0) & "'," & _
"'" & params(1) & "'," & _
"'" & params(2) & "'," & _
"'" & params(3) & "'," & _
"'" & params(4) & "'," & _
"'" & params(5) & "'," & _
"'" & params(6) & "')"
executestatement(strsql)
filldatagrid()
end sub
sub dgdata_edit (sender as object, e as datagridcommandeventargs)
filldatagrid(e.item.itemindex)
end sub
sub dgdata_delete (sender as object, e as datagridcommandeventargs)
dim strsql as string = "DELETE FROM tblusers " & _
"WHERE userid = " & e.item.itemindex + 1
executestatement(strsql)
filldatagrid()
end sub
sub dgdata_update (sender as object, e as datagridcommandeventargs)
if updatedatastore(e) then
filldatagrid(-1)
end if
end sub
sub dgdata_cancel (sender as object, e as datagridcommandeventargs)
filldatagrid(-1)
end sub
sub dgdata_pageindexchanged (sender as object, e as datagridpagechangedeventargs)
dgdata.databind()
end sub
function updatedatastore (e as datagridcommandeventargs) as boolean
dim i,j as integer
dim params(7) as string
dim strtext as string
dim blngo as boolean = true
j = 0
for i =1 to e.item.cells.count - 3
strtext = ctype(e.item.cells(i).controls(0), _
textbox).text
if strtext <> "" then
params(j) = strtext
blngo = true
j= j+1
else
blngo = false
lblmessage.text = lblmessage.text & _
"you forgot to enter a value<p>"
end if
next
if not blngo then
return false
exit function
end if
dim strsql as string = "update tblusers SET " & _
"Firstname.value = '" & params(0) & "'," & _
"lastname.value = '" & params(1) & "'," & _
"address.value = '" & params(2) & "'," & _
"city.value = '" & params(3) & "'," & _
"state.value = '" & params(4) & "'," & _
"zip.value = '" & params(5) & "'," & _
"phone.value = '" & params(6) & "'," & _
" WHERE Userid = " & ctype(e.item.cells(0). _
controls(1), label).text
executestatement (strsql)
return blngo
end function
sub filldatagrid (optional editindex as integer = -1)
' open connection
dim objcmd as new oledbcommand _
("select * from tblusers", conn)
dim objreader as oledbdatareader
try
objcmd.connection.open ()
objreader = objcmd.executereader()
catch ex as exception
lblmessage.text = "error retrieving from the " & _
"database."
end try
dgdata.datasource = objreader
if not editindex.equals(nothing) then
dgdata.edititemindex = editindex
end if
dgdata.databind()
objreader.close
objcmd.connection.close()
end sub
function executestatement (strsql)
dim objcmd as new oledbcommand(strsql, conn)
try
objcmd.connection.open()
objcmd.executenonquery()
catch ex as exception
lblmessage.text = ex.message
end try
objcmd.connection.close()
end function
</script>
<html><body>
<asp:label id= "lblmessage" runat ="server" />
<form runat= "server">
<asp:datagrid id = "dgdata" runat ="server"
bordercolor = "black"
gridlines="vertical"
cellpadding ="4"
cellspacing="0"
width = "100%"
autogeneratecolumns = "False"
ondeletecommand = "dgdata_delete"
oneditcommand = "dgdata_edit"
oncancelcommand = "dgdata_cancel"
onupdatecommand = "dgdata_update"
onpageindexchanged= "dgdata_pageindexchanged"
font-names = "arial"
font-size="8pt"
showfooter = "true"
headerstyle-backcolor= "#cccc99"
footerstyle-backcolor= "#cccc99"
itemstyle-backcolor= "#ffffff"
alternatingitemstyle-backcolor="#cccccc">
<columns>
<asp:templatecolumn headertext="id">
<itemtemplate>
<asp:label id = "name" runat = "server"
text = '<%# container.dataitem("userid")%>' />
</itemtemplate>
</asp:templatecolumn>
<asp:boundcolumn headertext = "firstname"
datafield = "firstname" />
<asp:boundcolumn headertext = "lastname"
datafield = "lastname" />
<asp:boundcolumn headertext = "address"
datafield = "address" />
<asp:boundcolumn headertext = "city"
datafield = "city" />
<asp:boundcolumn headertext = "state"
datafield = "state" />
<asp:boundcolumn headertext ="zip"
datafield = "zip" />
<asp:boundcolumn headertext ="phone"
datafield = "phone" />
<asp:editcommandcolumn
edittext="Edit"
canceltext="cancel"
updatetext="update"
headertext = "edit"/>
<asp:buttoncolumn headertext = "delete?" text = "X"
commandname = "delete"
buttontype = "pushbutton" />
</columns>
</asp:datagrid><p>
<asp:panel id= "addpanel" runat = "server">
<table>
<tr>
<td width ="100" valign = "top">
first and last name:
</td>
<td width ="300" valign = "top">
<asp:textbox id= "tbfname" runat = "server"/>
<asp:textbox id= "tblname" runat = "server"/>
</td>
</tr>
<tr>
<td valign = "top">address:</td>
<td valign= "top">
<asp:textbox id= "tbaddress" runat = "server"/>
</td>
</tr>
<tr>
<td valign = "top">city, state, zip:</td>
<td valign= "top">
<asp:textbox id= "tbcity" runat = "server"/>
<asp:textbox id= "tbstate" runat = "server"/>
<asp:textbox id= "tbzip" runat = "server"
size=5 />
</td>
</tr>
<tr>
<td valign= "top">phone:</td>
<td valign= "top">
<asp:textbox id= "tbphone" runat = "server"
size = 11/><p>
</td>
</tr>
<tr>
<td colspan = "2" valign = "top" allign = "right">
<asp:button id = "btsubmit" runat ="server" text ="add"
onclick = "submit" />
</td>
</tr>
</table>
</asp:panel>
</form>
</body></html>
View 14 Replies
View Related
Mar 1, 2004
In SQL 7.0 SP3 , I am receiving this message....
Server: Msg 170, Level 15, State 1, Line 17
Line 17: Incorrect syntax near ')'.
When I try to execute this code from SQL Query Analyzer...
DECLARE @DPPNumberCursor INT
DECLARE DPPNumberCursor Cursor for Select PPAP_ID
from ppap
where ppap_cancel <> "1" and
ppap_close <> "1" and
projectonhold <> "1"
OPEN DPPNumberCursor
Fetch Next From DPPNumberCursor
INTO @dppnumbercursor
While @@Fetch_Status = 0
Begin
INSERT INTO APQPSubformTable (apqpsub_id)
Values (@dppnumbercursor)
Bsically, I want to insert the number held in @dppnumbercursor in the APQPSub_id field.
Any help would be appreciated.
View 10 Replies
View Related
Mar 5, 2008
I have run into a problem with my instert satement that gives me a syntax error whenever i try and add an extra value to it.
This one works but
Code Snippet
string sqlString1 = "INSERT INTO QuoteHeader (QuoteHeaderID, CustomerID, EmployeeID) VALUES("
+ newOrderHeader
+ ",'" + custID
+ "','" + empID
+ "')";
add another value and I get a synax error And i'm not sure why.
Code Snippet
string sqlString1 = "INSERT INTO QuoteHeader (QuoteHeaderID, CustomerID, EmployeeID, Month) VALUES("
+ newOrderHeader
+ ",'" + custID
+ "','" + empID
+ "','" + textBox6.Text
+ "')";
Code Snippet
try
{
cmd = new OleDbCommand(sqlString1, connectCmd);
int rowsReturned = cmd.ExecuteNonQuery();
}
catch (Exception ex)
{
string s = ex.Message;
DisposeResources(ref oleDbDataAdapter, ref ds, ref connectFill, ref connectCmd, ref cmd);
return;
}
View 7 Replies
View Related
Mar 27, 2001
Folks!
What is wrong with my syntax with the following command?:
alter table EmployeeInfo alter column OriginDate smalldatetime not null default getdate()
I'm getting:
Incorrect syntax near the keyword 'default'
Currently, in my table OriginDate is nullable with no default.
Thanks in advance for your help!
APF
View 2 Replies
View Related
Apr 12, 2007
I am so close to haveing the web page i want, but i hve a syntax error with the Public Function Insert() as Integer.
I see no reason for this
i will post the code below, any help will be appreciated
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" %>
<script runat="server">
Private Sub Submitdata(ByVal Source As Object, ByVal e As EventArgs)
SqlDataSource1.Insert()
End Sub ' Submitdata
</script>
<asp:Content ID="Content1" runat="server" ContentPlaceHolderID="ContentPlaceHolder1">
<asp:sqldatasource
id="SqlDataSource1"
runat="server"
connectionstring="<%$ ConnectionStrings:clientInfoConnectionString %>"
selectcommand="SELECT Client Name,Client Address FROM Clients"
insertcommand="INSERT INTO Clients (Client Name,Client Address) VALUES (@CName,@CAddress)">
<insertparameters>
<asp:formparameter name="CName" formfield="Namebox" />
<asp:formparameter name="CAddress" formfield="Addressbox" />
</insertparameters>
</asp:sqldatasource>
Name:<br />
<asp:TextBox ID="Namebox" runat="server" /><br />
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="Namebox"
ErrorMessage="Please Enter A Name"></asp:RequiredFieldValidator>
<br />Address:<br />
<asp:TextBox ID="Addressbox" runat="server" /><br />
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" ControlToValidate="Addressbox"
ErrorMessage="Please Enter An Address"></asp:RequiredFieldValidator>
<br /><asp:Button ID="Submitbtn" runat="server" Text="Submit" OnClick="InsertShipper" />
<br />
</asp:Content>
Thanks
The King
View 10 Replies
View Related
Dec 14, 2006
I cannot identify where the syntax error is, please help.
INSERT INTO [Attendence/Activity Log] (ID Number, Date, Activity, Duration) VALUES ('39', '12/14/06', 'Health & Nutrition', '2')
View 1 Replies
View Related
Apr 9, 2007
Hello
I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :
and here goes the code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ?
Thanks a lot.
View 5 Replies
View Related
Nov 1, 2007
Following is the stored procedure iam trying to create.Here i am trying to
First create a table with the table name passed as parameter
Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows.
Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.
This table would be further used with cursor.
Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.
CREATE PROCEDURE [dbo].[sp_try]
@TempTable varchar(25)
AS
DECLARE @SQL nvarchar(MAX)
DECLARE @SQLINSERT nvarchar(MAX)
BEGIN
--create temp table
SELECT @Sql= N'CREATE TABLE ' + QUOTENAME(@TempTable) +
'(
ContactName varchar (40) NOT NULL ,
ContactId varchar (30) NOT NULL ,
ContactrMessage varchar (100) NOT NULL,
)'
EXEC sp_executesql @Sql, N'@TempTable varchar(25)', @TempTable = @TempTable
SELECT @sql= 'Select * from table'
SELECT @sqlinsert = 'INSERT INTO ' + quotename( @TempTable )
SELECT @sqlinsert = @sqlinsert + EXEC sp_executesql @sql, N'@Condition varchar(max)', @Condition=@Condition
EXEC sp_executesql @SQLINSERT, N'@TempTable varchar(25)', @TempTable = @TempTable
View 8 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Aug 3, 2006
I am having this error when using execute query for CTE
Help will be appriciated
View 9 Replies
View Related
Apr 8, 2005
Hi All,
I am trying to run an insert statement and getting an error.
Insert statement:
insert into conv_owner (name,street_num,
street_direction,street_name,street_type,street_un it,
address2,city,state,city_state,zip,wphone,inservic e,
db_name,table_name)
select "Facility's Owner",null,null,null,null,null,null,null,
null,null,null,"Owner's Telephone Number",inservice,
'BKFoodProtection.mdb','FP_Master'
from fp_master
Error message:
Server: Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric.
Any idea why? Thanks.
View 6 Replies
View Related
May 13, 2008
Hi
All as i have a class where i wrote a procedure for insert statement and i passed the value from the form and previously it was fine and now its giving the following error
" The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
And
code is as follows
Code Snippet
Public Sub Purchase_Header(ByVal BillNo As VariantType, ByVal BillDate As Date, ByVal GRNNO As VariantType, ByVal GRNdate As Date, ByVal TOP As Integer, ByVal Supplier As Integer, ByVal TotalPurchasevalue As Double, ByVal TotalProductValue As Double, ByVal BillPaid As Date, ByVal BillDue As Date, ByVal NoOfSBills As Integer, ByVal noofbreceived As Integer, ByVal billstatus As Integer, ByVal paymentstatus As Integer, ByVal appstatus As Integer, ByVal recitstatus As Boolean, ByVal sbillstatus As Boolean, ByVal ccindicator As String)
connection()
myCommand = New SqlCommand("INSERT INTO Purchase_Header(PH_Voucher_Date,PH_Bill_No,PH_Bill_Date,PH_GRN_No,PH_GRN_Date,PH_Type_Of_Purchase_Id,PH_Supplier_Id,PH_Total_Purchase_Value,PH_Total_Product_Value,PH_Bill_Paid_On,PH_Bill_Due_On,PH_No_Of_Sub_Bills,PH_No_Of_Sub_Bills_Received,PH_Bill_Status,PH_Payment_Status,PH_Apportionment_Status,PH_Goods_Receipt_Status,PH_Sub_Bill_Receipt_Status,PH_Cash_Credit_Indicator,PH_Total_Tax_Paid) VALUES('" & System.DateTime.Today & "'," & BillNo & ",'" & BillDate & "'," & GRNNO & ",'" & GRNdate & "'," & TOP & "," & Supplier & "," & TotalPurchasevalue & "," & TotalProductValue & ",'" & BillPaid & "','" & BillDue & "'," & NoOfSBills & "," & noofbreceived & "," & billstatus & "," & paymentstatus & "," & appstatus & ",'" & recitstatus & "','" & sbillstatus & "' ,'" & ccindicator & "',0)", myConnection)
myCommand.ExecuteReader()
MsgBox("Data saved successfully")
myConnection.Close()
and table structure is as follows and for date types i am passing them through date variables from textbox
INSERT INTO [MoneyBee].[dbo].[Purchase_Header]
([PH_Voucher_Date]
,[PH_Bill_No]
,[PH_Bill_Date]
,[PH_GRN_No]
,[PH_GRN_Date]
,[PH_Type_Of_Purchase_Id]
,[PH_Supplier_Id]
,[PH_Total_Purchase_Value]
,[PH_Total_Product_Value]
,[PH_Bill_Paid_On]
,[PH_Bill_Due_On]
,[PH_No_Of_Sub_Bills]
,[PH_No_Of_Sub_Bills_Received]
,[PH_Bill_Status]
,[PH_Payment_Status]
,[PH_Apportionment_Status]
,[PH_Goods_Receipt_Status]
,[PH_Sub_Bill_Receipt_Status]
,[PH_Cash_Credit_Indicator]
,[PH_Total_Tax_Paid])
VALUES
(<PH_Voucher_Date, datetime,>
,<PH_Bill_No, varchar(15),>
,<PH_Bill_Date, datetime,>
,<PH_GRN_No, numeric,>
,<PH_GRN_Date, datetime,>
,<PH_Type_Of_Purchase_Id, numeric,>
,<PH_Supplier_Id, numeric,>
,<PH_Total_Purchase_Value, numeric,>
,<PH_Total_Product_Value, numeric,>
,<PH_Bill_Paid_On, datetime,>
,<PH_Bill_Due_On, datetime,>
,<PH_No_Of_Sub_Bills, numeric,>
,<PH_No_Of_Sub_Bills_Received, numeric,>
,<PH_Bill_Status, numeric,>
,<PH_Payment_Status, numeric,>
,<PH_Apportionment_Status, numeric,>
,<PH_Goods_Receipt_Status, bit,>
,<PH_Sub_Bill_Receipt_Status, bit,>
,<PH_Cash_Credit_Indicator, varchar(6),>
,<PH_Total_Tax_Paid, numeric,>)
Thanks
Avinash
View 5 Replies
View Related
Apr 26, 2008
hi
i'm having a problem with my project we need to make for school with asp.net & c#. the problem is i'm a newbie with c#.
the project we need to make is a survey. so the problem is my first question of the survey works fine when i push the go to next it enters the data nice into my sql db and my second question loads, then I enter the answer for my second question i press go to next question and i get this error: " The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Antwoorden_Gebruikers". The conflict occurred in database "GIP_enquete", table "dbo.Gebruikers", column 'Gebruiker_ID'. " I don't know how i can fix this cause im to newbie to understand whats wrong.
here is a view of my code:
Code Snippet
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using enqueteTableAdapters;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
int Vraag_ID = Convert.ToInt16(Request.QueryString["vraagid"]);
VragenTableAdapter VraagAdapter = new VragenTableAdapter();
lblVraag.Text = Convert.ToString(VraagAdapter.GeefVraag(Vraag_ID));
if (Vraag_ID == 1)
{
pnlVraag1.Visible = true;
}
if (Vraag_ID == 2)
{
pnlVraag2.Visible = true;
}
}
protected void btnVraag1_Click(object sender, EventArgs e)
{
//make a new user
GebruikersTableAdapter GebruikerAdapter = new GebruikersTableAdapter();
DateTime Moment = System.DateTime.Now;
GebruikerAdapter.GebruikerToevoegen(Moment);
int GebruikerID = Convert.ToInt16(GebruikerAdapter.GeefGebruikerID(Moment));
this.ViewState.Add("gebruiker_id", GebruikerID);
//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(1, GebruikerID, txtVraag1.Text, null);
//go to 2nd question
Response.Redirect("Default.aspx?vraagid=2", true);
}
protected void btnVraag2_Click(object sender, EventArgs e)
{
//get back the user from question 1
int GebruikerID = Convert.ToInt16(this.ViewState["gebruiker_id"]);
//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(2, GebruikerID, txtVraag2.Text, null);
when i run debug it allways stops here
//go too 3th question
Response.Redirect("Default.aspx?vraagid=3", true);
}
}
can somebody plz help me ? =(
ps: sorry for my bad english
View 3 Replies
View Related
Dec 11, 2004
I am receiving the following error when trying to insert values from textboxes on a registration form:
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30205: End of statement expected.
Source Error:
Line 19: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Line 20:
Line 21: Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Line 22: Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
Line 23: dbCommand.CommandText = queryString
My code is below. Can anyone help me figure out what is wrong with my code?
<%@ Page Language="VB" Debug="true" %>
<%@ Register TagPrefix="wmx" Namespace="Microsoft.Matrix.Framework.Web.UI" Assembly="Microsoft.Matrix.Framework, Version=0.6.0.0, Culture=neutral, PublicKeyToken=6f763c9966660626" %>
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.Data.OleDb" %>
<script runat="server">
Sub btnSubmit_Click(sender As Object, e As EventArgs)
Dim UCde as string = txtUserID.Text
Dim UserID as string = txtUserID.Text
Dim Password as string = txtPassword.Text
Dim Email1 as string = txtEmail.Text
Dim FirstName as string = txtFirstName.Text
Dim LastName as string = txtLastName.Text
Dim AdminLevel as string = dropAccountType.SelectedItem.Value
Dim connectionString As String = "server='(local)'; trusted_connection=true; database='master'"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection
Dim rowsAffected As Integer = 0
dbConnection.Open()
dbCommand.ExecuteNonQuery()
dbConnection.Close()
End Sub
Thanks for your help.
Chris
View 5 Replies
View Related
Jan 14, 2013
Using Access 2010 and SQL Server 2012..i added a database through SSMS and added a table named tblEmployee (dbo.tblEmployee)
The table has 3 fields
LName (nvarchar(50), null)
FName (nvarchar(50), null)
Code (nvarchar(50), null)
The access table has 3 fields
FName, text
LName, text
Code, text
I found a code snippet here to insert from the Access table to the SQL table.UtterAccess Discussion Forums > Appending Access table to SQL Server table (and vice-versa) usin...The code is generating this error
Run-time error '3134':
Syntax error in INSERT INTO statement
Code:
Option Compare Database
Sub AppToSQL()
Dim strODBCConnect As String
Dim strSQL As String
'Code from:
[code]...
View 5 Replies
View Related
Apr 26, 2008
hi
i'm having a problem with my project we need to make for school with asp.net & c#. the problem is i'm a newbie with c#.
the project we need to make is a survey. so the problem is my first question of the survey works fine when i push the go to next it enters the data nice into my sql db and my second question loads, then I enter the answer for my second question i press go to next question and i get this error: " The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Antwoorden_Gebruikers". The conflict occurred in database "GIP_enquete", table "dbo.Gebruikers", column 'Gebruiker_ID'. " I don't know how i can fix this cause im to newbie to understand whats wrong.
here is a view of my code:
Code Snippet
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using enqueteTableAdapters;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
int Vraag_ID = Convert.ToInt16(Request.QueryString["vraagid"]);
VragenTableAdapter VraagAdapter = new VragenTableAdapter();
lblVraag.Text = Convert.ToString(VraagAdapter.GeefVraag(Vraag_ID));
if (Vraag_ID == 1)
{
pnlVraag1.Visible = true;
}
if (Vraag_ID == 2)
{
pnlVraag2.Visible = true;
}
}
protected void btnVraag1_Click(object sender, EventArgs e)
{
//make a new user
GebruikersTableAdapter GebruikerAdapter = new GebruikersTableAdapter();
DateTime Moment = System.DateTime.Now;
GebruikerAdapter.GebruikerToevoegen(Moment);
int GebruikerID = Convert.ToInt16(GebruikerAdapter.GeefGebruikerID(Moment));
this.ViewState.Add("gebruiker_id", GebruikerID);
//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(1, GebruikerID, txtVraag1.Text, null);
//go to 2nd question
Response.Redirect("Default.aspx?vraagid=2", true);
}
protected void btnVraag2_Click(object sender, EventArgs e)
{
//get back the user from question 1
int GebruikerID = Convert.ToInt16(this.ViewState["gebruiker_id"]);
//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(2, GebruikerID, txtVraag2.Text, null);
when i run debug it allways stops here
//go too 3th question
Response.Redirect("Default.aspx?vraagid=3", true);
}
}
can somebody plz help me ? =(
ps: sorry for my bad english
View 7 Replies
View Related
May 3, 2004
HI,
WELL WE HAVE BEEN TRYING TO AUTOMATE A PROCEDURE OUT HERE,AND WE ARE TRYING TO CONVERT MOST OF THE THINGS INTO PROCEDURES.
BUT WE ARE GETTING A FEW HICCUPS. PLS HELP
THIS IS HOW IT GOES :-
CREATE PROCEDURE MY_PROC1
AS
BEGIN
ST1 .........;
ST2..........;
END
CREATE PROCEDURE MY_PROC2
AS
BEGIN
CREATE TABLE #TMP2
(COL1 DATATYPE
COL2 DATATYPE)
INSERT INTO #TMP2
EXEC MY_PROC1
ST1 .........;
ST2..........;
END
THIS PROCEDURE TOO RUNS WELL ,AFTER TAKING THE DATA FROM THE FIRST PROC IT MANIPUATES THE DATA ACCORDING TO THE CRITERIA SPECIFIED
NO PROBLEM TILL NOW.......
BUT,
CREATE PROCEDURE MY_PROC3
AS
BEGIN
CREATE TABLE #TMP3
(COL1 DATATYPE
COL2 DATATYPE)
INSERT INTO #TMP3
EXEC MY_PROC2
ST1 .........;
ST2..........;
END
THEN IT GIVES AN ERROR AS :-
"An INSERT EXEC statement cannot be nested."
CAN'T WE , FROM A PROCEDURE CALL A PROCEDURE WHICH CALLS A PROCEDURE........
WHAT IS THE NESTING LEVEL OF A PROCEDURE ?
IS THERE ANY WAY AROUND IT OR CAN IT BE DONE BY CHANGING SOME SETTINGS ?
PLS HELP ME OUT IN THIS
THANKS
View 13 Replies
View Related
Nov 28, 2005
Hi,all,When I use following sql, an error occurs:insert into #tmprepEXECUTE proc_stat @start,@endThere is a "select * from #tmp " in stored procedure proc_stat, and theerror message is :Server: Msg 8164, Level 16, State 1, Procedure proc_stat, Line 42An INSERT EXEC statement cannot be nested.What's the metter? Any help is greatly appreciated. Thanks
View 2 Replies
View Related
Aug 15, 2007
When I run this query against PFGDSMRISSQLQ1 in Server manager 2005:use <database>INSERT INTO dbo.<table> (<column1>, <column2>, <column3>)VALUES (12598,2900,1.00)I get this error:Msg 8624, Level 16, State 1, Line 5Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services.Can someone please help. Thanks!
View 1 Replies
View Related
Mar 9, 2008
The following SQL statement fails on SQL CE 3.5 but works on SQL Express 2005:
"INSERT INTO BOOKINGS VALUES(@now,'"+note+"'," + p + "); SELECT @@IDENTITY;"
Compact 3.5 doesnt like the SELECT statement claiming that:
There was an error parsing the query. [ Token line number = 1,Token line offset = 72,Token in error = SELECT ]
Can anyone suggest the correct SQL to implement this via Compact? i.e. How do I retrieve the Identity value during and insert statement?
I have removed the SELECT @@IDENTITY; portion of the statement and it runs fine.
View 9 Replies
View Related
Jul 28, 2015
Have run to a select permission error when attempting insert data to a table. received the following error
Msg 229, Level 14, State 5, Line 11
The SELECT permission was denied on the object 'tableName', database 'DBname', schema 'Schema'.
Few things to note
- There are no triggers depending on the table
- Permissions are granted at a roll level which is rolled down to the login
- The test environments have the same level of permission which works fine.
View 6 Replies
View Related
May 15, 2008
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
View 2 Replies
View Related
Jan 23, 2008
Hi,
I created a sqldatasource (sql server) and a gridview.In the aspx file, i can see the selectcommand:
SelectCommand="select email from mytable"
Now, i want to modify something in the selectcommand produced in the aspx file, in order to get the emails in clickable mode. I knwow i have to add a string like:
<a hef="mailto:mailaddress">mailadress</a>
So i tried this:
SelectCommand="select '<a href="mailto:'+ email +'">' , email + '</a>' from email
But this gives the error: "tag is not well formed".The problem is the " around mailto:
Thanks
Cl.
View 4 Replies
View Related
May 23, 2008
Here is an sql query but it keeps giving me an error of (Incorrect syntax near keywork ON)
here is the sql, don't get why this doe not work when I have done it this way multiple times.
select DISTINCT c.strSSN, p.sidstrNAME_IND,
p.sidstrGR_ABBR_CODE, p.sidstrSSN_SM, p.sidstrST_ADDR, p.sidstrADDR_CITY, p.sidstrSTATES_US, p.sidstrZIP_CODE, p.sidstrPAY_GR, p.sidstrMARTL_STAT,
p.sidstrNBR_EXEMPT, p.sidstrST_TAX_CODE, u.lsdbstrPHONE_NBR_HOME, case when sidstrTech_SVC_Code in ('M', 'R', 'S', 'T', 'U', 'Z') then
case when sidstrACT_STAT_PROG in ('5', 'A', 'E', 'F', 'N', 'R', 'S', 'T') then 'AGR' else 'Tech' end else 'M-Day' end
as status from tblAssignedPersonnel as c on ap.strssn = p.sidstrSSN_SM Inner Join
cms.dbo.tblLSDB as u on u.lsdbstrSSN_SM = c.strSSN inner joincms.dbo.tblSidpers as p on ap.strSSN = p.sidstrSSN_SM where intUICID = (select intUICID from tblUIC
where strUIC = '2' and intTaskForceID = '1') order by p.sidstrNAME_IND
View 3 Replies
View Related
