I am new to SQL administration.
[color=blue]
>From a list of IDs that are the primary key in one table (i.e. Customer[/color]
Table), I want to make changes in tables that use those IDs as a
foreign key.
Basically I want to say:
If fk_ID is in list [1,2,3,4,5] then
do these statements to that record
End if
Where do I begin?
Thanks for help with this low-level view of SQL programming.
-tom
I'm trying this
Code:
CREATE TABLE Rating
(ContentID int NOT NULL PRIMARY KEY REFERENCES Content_(ContentID),
UserID int NOT NULL PRIMARY KEY REFERENCES Usr(UserID),
rating tinyint DEFAULT 2,
LastRead smalldatetime NOT NULL DEFAULT CURRENT_TIMESTAMP)
And it is telling me this:
Msg 8110, Level 16, State 0, Line 14
Cannot add multiple PRIMARY KEY constraints to table 'Rating'.
So how do I combine two non-unique foreign keys, the combination of which is unique, into one primary key?
Hello,We imported a bunch of tables from a database and realized that theprimary keys weren't copied to the destination db. In order to re-create the keys, we need to know which tables have them. Is there acommand that I can use (on the source db) to find out which tablescontain primary keys? The db has hundreds of tables and I'd rather notgo through each one to see which has a primary key.Also, for future reference, is there a way to include the primary keyon an import?Thanks,Peps
View 2 Replies View RelatedI have a DB with 100 tables. I was wondering if anybody knows a quick way to list primary and foreign key with the column name for all the tables.
Your help would make my life a lot easier
thanks
Ok, I'm really new at this, but I am looking for a way to automatically insert new records into tables. I have one primary table with a primary key id that is automatically generated on insert and 3 other tables that have foreign keys pointing to the primary key. Is there a way to automatically create new records in the foreign tables that will have the new id? Would this be a job for a trigger, stored procedure? I admit I haven't studied up on those yet--I am learning things as I need them. Thanks.
View 4 Replies View RelatedHi,
I have set up a publisher using transactional replication. ( all seems ok). The initial snapshot has been generated.
The replication share on the distributor has all the generated DDL in it.
I add a subscriber. The tables are generated up to tblCountry then I get an incorrect syntax near ')' error
The Replication Monitor shows the following code as the cause. ( bold indicates incorrect sql)
Is this a bug in Replication (as this is an autogenerated sp)or have I configured something incorrectly?
The ddl for the table index is as follows ( from the replication folder)
/----
CREATE TABLE [APP].[tblCountry](
[CountryId] AS ([ISO 3166-1 NUMERIC-3]) PERSISTED NOT NULL,
[CountryCode] AS ([ISO 3166-1 ALPHA-2]) PERSISTED NOT NULL,
[CountryName] [varchar](80) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-2] [char](2) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-3] [char](3) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 NUMERIC-3] [int] NOT NULL
)
GO
---/
/------ Keys ddl (.dx)
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [PK_TBLCOUNTRY] PRIMARY KEY CLUSTERED ([CountryId])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA2] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-2])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA3] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-3])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_COUNTRYNAME] UNIQUE NONCLUSTERED ([CountryName])
go
--------/
/------------
Command attempted:
create procedure "sp_MSins_APPtblCountry_msrepl_ccs"
@c1 int,@c2 varchar(80),@c3 char(2),@c4 char(3),@c5 int
as
begin
if exists ( select * from "APP"."tblCountry"
where
)
begin
update "APP"."tblCountry" set
"CountryName" = @c2
,"ISO 3166-1 ALPHA-2" = @c3
,"ISO 3166-1 ALPHA-3" = @c4
,"ISO 3166-1 NUMERIC-3" = @c5
where
end
else
begin
insert into "APP"."tblCountry"(
"CountryName"
,"ISO 3166-1 ALPHA-2"
,"ISO 3166-1 ALPHA-3"
,"ISO 3166-1 NUMERIC-3"
)
values (
@c2
,@c3
,@c4
(Transaction sequence number: 0x00000016000004F2014500000000, Command ID: 213)
------------/
I'm using the following syntax to extract a list of all the table names on a linked server:
EXEC sp_tables_ex
@table_server = MY_SERVER_NAME
It outputs a list of tables into 4 columns in the result window.Is there a way an can use this as a 'SELECT * FROM ... " command so that I can organize records, insert into, etc etc ?
I frequently have the problem where I have a list of items to delete ina temp table, such asProjectId Description------------- ----------------1 test12 test43 test34 test2And I want to delete all those items from another table.. What is thebest way to do that? If I use two IN clauses it will do it where itmatches anything in both, not the exact combination of the two. I can'tdo joins in a delete clause like an update, so how is this typicallyhandled?The only way I can see so far to get around it is to concatenate thecolumns like CAST(ProjectId as varchar) + '-' + Description and do anIN clause on that which is pretty nasty.Any better way?
View 2 Replies View RelatedI'm getting a foreign key error as well as Indentity Insert error when I'm trying to run a stored proc that inserts values from another table..help!!
View 4 Replies View RelatedHi world,Normally we receive the results of a query in several or thousands of rows. Select * From Clients-------------------------Row1. Client1Row2. Client2....Which is the the way to have everything on the same row separated by commas?Row1. Client1, Client2...thxDavid
View 1 Replies View RelatedHi everyone.
I have two tables: the catalog table and the detail table.
The two tables are joined by a two-columns key.
I want to make a Delete sentence for delete all the rows in the Catalog table that aren't in the detail table, in SQL Server.
The only problem is that the key is composed by two colums.
If the Key was maded of one column, that would be easy, like this:
DELETE FROM CATALOG
WHERE CATALOGKEY NOT IN (SELECT CATALOGKEY FROM DETAIL)
But it is possible to make a delete sentence if the key has two columns ?
Thanks
I want to delete the duplicate record from a table keeping 1 record aside.
My base table is-info
idnameclass
2abc6a
3abc6a
4abc6a
1abc6a
2abc6a
4abc6a
4abc6a
3abc6a
3abc6a
1abc6a
2abc6a
5abc6a
id-int
name-text
class-varchar
(there is no primary key in this table)
Now I want the result in following way:
idnameclass
2abc6a
3abc6a
4abc6a
1abc6a
I have tried the following query and its running fine but its not a dynamic stuff.
DELETE top (SELECT COUNT(*)-1 FROM aaa WHERE id ='3') --or put some number
FROM aaa
WHERE id ='3'-- or put some number
Hi to all,
I'm a new member here and i would like to ask for some help regarding my problem. first i ahve an incremental primary key with format to something like this: 001-01-001, 001-01-002, 001-01-003, etc. My problem is that i want to insert (supply) the 'missing' or 'gaps' in my primary key field like for example: ..., 001-01-067, 001-01-068, 001-01-070. i want to insert the value 001-01-069 after the record 001-01-068. I have several gaps some ranging from several numbers like 005-04-007,005-04-020 which has a 13 records gap. Is there a way for stored procedure to solve this one?Thanks in advance.
Hello all
quick question-- Im looking for the most effiecient way to extract data daily from a table with some 9.5 mill records and growing. These are transaction records and ideally I would like to bring over the last days transactions and add them to my existing table. I cannot use the transaction date as sometime we have to operate in an "Offline" mode where the records are brought over sometime later. This could be days are unfortunetaly a week or more. there are some 30 fields in the transaction table so is there a more efficient way to do this simply creating a concatenated key?? Would it be more effiecient to drop and recreate the table daily? that sounds extreme so wanted to get a few ideas.
Thanks in Advance
km
hello dudes. i've got the following table:
table name: assassins
fields:
assassinid int, identity, primary key
assassinname nvarchar
assassincallsign nvarchar
knifekills int
sniperkills int
stealthkills int
fibergarotekills int
sample data:
1, Dana White, tapout, 12, 0, 12, 1
2, Chuck Liddell, iceman, 30, 0, 0, 2
3, Timothy Oliphant, FortySeven, 100, 20, 150, 30
supposed i want to retreive only those records whose type of kills is on a given list, how do i do that? the list is actually dynamic since the kill types is actually coming from a checkbox on my page:
[] Knife Kills
[] Sniper Kills
[] Stealth Kills
[] Fibergarrote Kills
supposed i will only check Knife Kills, it will only retreive those records whose knifekills > 0
or if i check Snipers Kills and Stealth Kills, then those records whose sniperkills and stealthkills is > 0.
any of you know how to do that?
U + U + D + D + L + R + L + R + Sel + Start...
Hi
I have a table called DiaryDate2 and a query called DiaryDateOver8 and want to have a sql query to return the records from the table that are not in the query based on two linked fields username and Diarydate1
The SQL I have written however returns all records
SelectCommand="SELECT DiaryDate2.Username, DiaryDate2.DiaryDate1 FROM DiaryDate2
WHERE(DiaryDate2.Username = ?)AND NOT EXISTS (SELECT 1 from DiaryDateover8 where DiaryDateover8.Username=DiaryDate2.Username AND DiaryDateover8.DiaryDate1=DiaryDate2.DiaryDate1)ORDER BY DiaryDate2.DiaryDate1">
Please could someone help
Many thanks Colin
hilet me explain my need..following are the tables im using..tbl_company (company table - parent) id company 1 test 2 test123 tbl_dept (department table - master) id dept 1 dept1 2 dept2tbl_compdept (company departments table - child) cmpid deptid 1 1 2 1 2 2 wats my need is.. while the company is listing..by query using joins, result was like this..company depttest dept1test123 dept1test123 dept2i need company test123 should be listd only once..when i use group by or distinct means, all r listed..is there any way to filter out therepeating company list by just listing the company list only once..
View 5 Replies View RelatedHi all,
I have to insert records using transact iin the stored procedure. I have some thing like:
DECLARE @Err varchar(100)
DECLARE insertQ varchar(1000)
SET @Err = 'Insertion data'
SET @insertQ =('INSERT INTO dbo.T_ERRORLOG (ERROR_DESCR) VALUES(' + @Err + ')')
EXEC insertQ
But it don't work. Can you help me to solve the problem plz?
Thanks a lot
TT
Hi all,
I’m trying to export 120 tables from SQL server 2000 to SQL server 2005 with their Primary and corresponding records.
Is there way to do this?
Thanks for any help.
Abrahim
I upsized an access database with a key / index on ordernumber and linenumber.
However if I open the table in the Management Studio the records aren't ordered this way (same goes for select * from table) I get:
Ordernumber
Linenumber
200724001
37
200724004
3
200724006
33
200724001
3
200724011
19
200724014
5
200724006
37
200724011
19
200724006
28
Same goes for my crystal reports files, since the records aren't ordered by ordernumber / linenumber all my formulas go bezerk..
Am I wrong thinking the records should be ordered according to the prim. index?
Please help because I don't want to have to change all my 40+ reports to include an "ORDER BY"
Best regards,
Mike
I have a table called acc1152 with the field accno. depending on what the value of this field is, i need to replace it with a new value. These are the values i need to update
old value new value
7007 4007
7008 4008
4008 7
7009 4009
7011 4011
4011 ' '
7010 4010
4010 1
7016 4016
4016 1
4506 4006
4512 4012
how do I write one query that will accomplish this?
Good day!
I just can't figure out how I can display only the top record for the duplicate records in my table.
Example:
Table1
Code Date
01 10/1/05
01 10/2/05
01 10/3/05
02 9/9/05
02 9/9/05
02 9/10/05
My desired result would be:
Table1
Code Date
01 10/1/05
02 9/9/05
Thanks.
I have a sql sever 2005 express table with an automatically incremented primary key field. I use a Detailsview to insert new records and on the Detailsview itemInserted event, i send out automated notification emails.
I then received two automated emails(indicating two records have been inserted) but looking at the database, the records are not there. Whats confusing me is that even the tables primary key field had been incremented by two, an indication that indeed the two records should actually be in table. Recovering these records is not abig deal because i can re-enter them but iam wondering what the possible cause is. How come the id field was even incremented and the records are not there yet iam 100% sure no one deleted them. Its only me who can delete a record.
And then how come i insert new records now and they are all there in the database but now with two id numbers for those missing records skipped. Its not crucial data but for my learning, i feel i deserve understanding why it happened because next time, it might be costly.
Table 1
Code
Quarter
500002
26
500002
27
500002
28
500002
28.5
500002
29
Table 2
Code
Qtr
500002
26
500002
27
I have these two identical tables with the columns CODE & Qtr being COMPOSITE PRIMARY KEYS
Can anybody help me with how to compare the two tables to find the records not present in Table 2
That is i need this result
Code
Quarter
500002
28
500002
28.5
500002
29
I have come up with this solution
select scrip_cd,Qtr,scrip_cd+Qtr from Table1 where
scrip_cd+Qtr not in (select scrip_cd+qtr as 'con' from Table2)
i need to know if there is some other way of doing the same
Thanks in Advance
Jacx
Im trying to get query by selecting the month from dropdownlist and display the records .by using the below query I need to enter the date in tecxtboc then it will show the output
select Standard, Total, MonthName
from (SELECT Standard, COUNT(Standard) AS Total,
datename(month, ReportDate) as [MonthName]
FROM CPTable where
ReportDate >= @ReportDate
[Code] .....
I need some help with a stored procedure to insert multiple rows into a join table from a checkboxlist on a form. The database structure has 3 tables - Products, Files, and ProductFiles(join). From a asp.net formview users are able to upload files to the server. The formview has a products checkboxlist where the user selects all products a file they are uploading applies too. I parse the selected values of the checkboxlist into a comma delimited list that is then passed with other parameters to the stored proc. If only one value is selected in the checkboxlist then the spproc executed correctly. Also, if i run sql profiler i can confirm that the that asp.net is passing the correct information to the sproc:
exec proc_Add_Product_Files @FileName = N'This is just a test.doc', @FileDescription = N'test', @FileSize = 24064, @LanguageID = NULL, @DocumentCategoryID = 1, @ComplianceID = NULL, @SubmittedBy = N'Kevin McPhail', @SubmittedDate = 'Jan 18 2006 12:00:00:000AM', @ProductID = N'10,11,8'
Here is the stored proc it is based on an article posted in another newsgroup on handling lists in a stored proc. Obviously there was something in the article i did not understand correctly or the author left something out that most people probably already know (I am fairly new to stored procs)
CREATE PROCEDURE proc_Add_Product_Files_v2/*Declare variables for the stored procedure. ProductID is a varchar because it will receive a comma,delimited list of values from the webform and then insert a rowinto productfiles for each product that the file being uploaded pertains to. */@FileName varchar(150),@FileDescription varchar(150),@FileSize int,@LanguageID int,@DocumentCategoryID int,@ComplianceID int,@SubmittedBy varchar(50),@SubmittedDate datetime,@ProductID varchar(150)
ASBEGIN
DECLARE @FileID INT
SET NOCOUNT ON
/*Insert into the files table and retrieve the primary key of the new record using @@identity*/ INSERT INTO Files (FileName, FileDescription, FileSize, LanguageID, DocumentCategoryID, ComplianceID, SubmittedBy, SubmittedDate) Values (@FileName, @FileDescription, @FileSize, @LanguageID, @DocumentCategoryID, @ComplianceID, @SubmittedBy, @SubmittedDate)
Select @FileID=@@Identity
/*Uses dynamic sql to insert the comma delimited list of productids into the productfiles table.*/ DECLARE @ProductFilesInsert varchar(2000)
SET @ProductFilesInsert = 'INSERT INTO ProductFiles (FileID, ProductID) SELECT ' + CONVERT(varchar,@FileID) + ', Product1ID FROM Products WHERE Product1ID IN (' + @ProductID + ')' exec(@ProductFilesInsert) EndGO
I am trying to audit data quality based on some defined data quality rules. The rules are stored in tables and processed using stored procedures. I am facing a problem while generating audits. Let's say I am trying to audit data in OrderDetail table. The table design is mentioned below...I inserted some sample data into the table using RedGate data generator.The audit table output I am expecting is as mentioned in the screenshot below
Its the PrimaryKeyAttributeValues column I am facing problems with. I am using STUFF function within a dynamic SQL query to get the primary key's as a list of comma separated values.
Previously same records exists in table having primary key and table having foreign key . we have faced 7 records were lost from primary key table but same record exists in foreign key table.
View 3 Replies View Relatedwriting the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
So the output would look like :
CASE_ID VARIABLE
=====================
1 [ABC],[HDR],[GHHHHH]
2 [ABCSS],[CCHDR],[XXGHHVVVHHH],[KKKJU],[KLK]
SELECT
preop.Case_ID,
dbo.Concatenate( '[' + CAST(preop.value_text AS VARCHAR) + ']' ) as variable
FROM
dbo.TBL_Preop preop
WHERE
preop.Deleted_CD = 0
GROUP BY
preop.Case_ID
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
HI...
I need to do a simple task but it's difficult to a newbie on ssis..
i have two tables...
first one has an identity column and the second has fk to the first...
to each dataset row i need to do an insert on the first table, get the @@Identity and insert it on the second table !!
i'm trying to use ole db command but it's not working...it's showing the error "Insert Value list doest not match column list"
here is the script
INSERT INTO Address(
CepID,
Street,
Number,
Location,
Complement,
Reference)Values
(
?,
?,
?,
?,
?,
?
)
INSERT INTO CustomerAddress(
AddressID,
CustomerID,
AddressTypeID,
TypeDescription) VALUES(
@@Identity,
?,
?,
?
)
what's the problem ??
Why does the following call to a stored procedure get me this error:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'CONVERT'.
Code Snippet
EXECUTE OpenInvoiceItemSP_RAM CONVERT(DATETIME,'01-01-2008'), CONVERT(DATETIME,'04/30/2008') , 1,'81350'
The stored procedure accepts two datetime parameters, followed by an INT and a varchar(10) in that order.
I can't find anything wrong in the syntax for CONVERT or any nearby items.
Help me please. Thank you.