System Area Network (SAN) Support
Jun 4, 2002
We are trying to determine what SQL Server 2000 Edition is required for our environment. We really don't need any of the features that Enterprise Edition offers over Standard Edition, except that our disk storage is on a System Area Network (SAN). BOL says that SAN is not supported under Standard Edition, but I am under the impression, that if we are not using distributed queries or replication, then Enterprise Edition is not neccessary.
Any help?
View 1 Replies
ADVERTISEMENT
Oct 6, 1998
Hi everyone,
I have several SQL Server 6.5 machines. I would like to see what network support each server uses and change it if possible through the Enterprise Manager.
Thanks...Binh
View 1 Replies
View Related
Aug 30, 1999
When trying to Add a Network support from within SQL6.5 Setup I can only see Named Pipes and Multi-prototcol as my only options. I would like to have TCP-IP. How can I do that. TCP-IP is setup on the NT server. (Most likely after the SQL installation). How can I add the TCP-IP protocol support in SQL without re-installing SQL.
Any inside is appreciated.
Thank you
Guss
View 1 Replies
View Related
Aug 23, 2006
I'm trying to run an SSIS package. The package runs on an SQL 2005 server on Win2k3 server. The package tries to connect to another win2k3 server with sql 2000 to retrieve some data. However, I recieve the errormessage shown in the topic.
I found info about modifying the MSDTC security settings under "component services" and did so. I made sure everything was allowed. However, the result was the same. Does anyone have any other idéa about what could cause this problem?
PS. The package works fine if I set up both databases on the same physical machine...
Regards Andreas
View 3 Replies
View Related
Jul 10, 2006
Hi All,
Iam using HP iPAq hw6500 series PDA. My application in installed in the PDA and when i try to open the application by taping on the application icon, Iam getting the following error.
Error: 0x80004005 E_FAIL
Native Error: (25080)
Description: The operating system does not support encryption. [,,,,,]
Interface defining error: IID_IDBInitialize
Param. 0: 0
Param. 1: 0
Param. 2: 0
Param. 3:
Param. 4:
Param. 5:
The application is builded on embedded VC++4.0
Can anyone help to figure out the possible reason for this error?
Thanks & Regards
Rajeev
View 5 Replies
View Related
Sep 27, 2007
Hi,
We are using SQL Server Compact Edition v3.1. We have 2 users running on Windows XP with Service Pack 2, who are getting errors that the Operating System does not support encryption when creating a new database. The problem is not with the code, one of the users installed the same software on a different Windows XP system and the software operates correctly. We also have many other installations that are working properly as well, so it appears to be something specific to these 2 computers.
We've had the user try repairing their .NET Framework 2.0 install, in addition to confirming that the
Crypt32.DLL and CryptUI.DLL dependencies are both present and of the correct version in WindowsSystem32. We've also verified that the users do have write access in the directory we are trying to create the database.
Is there something we can do to fix encryption on these users systems or something the users may have done to disable encryption?
Thanks
View 4 Replies
View Related
Feb 15, 2007
Hi,
I've tried to enclose a few database operations in a TransactionScope block but it looks like SQL Server CE RM does ignores ambiental transaction.
Here is the code:
static void TestTxn() {
// Command to insert an integer in a table with a single integer column
string cmdPassText = "INSERT TESTTABLE (INTFIELD) VALUES(1)";
// Command to force field type mismatch exception
string cmdFailText = "INSERT TESTTABLE (INTFIELD) VALUES('Foo')";
using (TransactionScope scope = new TransactionScope()) {
using (SqlCeConnection conn = new SqlCeConnection("DataSource = 'Test.sdf'")) {
try {
conn.Open();
SqlCeCommand cmdPass = new SqlCeCommand(cmdPassText, conn);
returnValue = cmdPass.ExecuteNonQuery();
SqlCeCommand cmdFail = new SqlCeCommand(cmdFailText, conn);
returnValue = cmdFail.ExecuteNonQuery();
}
catch (Exception ex){
Console.WriteLine("Command failed");
Console.WriteLine("Exception Message: {0}", ex.Message);
}
}
scope.Complete();
}
}
After first command suceeds and seccond command failes table still has one affected row after transaction.
Am I doing something wrong or System.Transactions.Transaction is not supported with SQL Server CE RM?
Thanks,
Aleksandar
View 3 Replies
View Related
Oct 12, 2007
I read the online document, It seems that SSCE3.5 could support windows xp 64 bit operating system with WOW. but SSCE3.0 did not mention.
my appliaction is using SSCE3.0 on windows xp 32 bit operating system right now. I want it to be also used on windows xp 64 bit. but it seems that SSCE3.0 does not support it.
could anyone please give some suggestion? any idea and suggestion will be appreciated.
Thanks.
View 1 Replies
View Related
Nov 19, 2007
A customer of my program is getting the SQL CE error message "The operating system does not support encryption".
I've seen several threads on this issue, but none of them seem to apply to my problem. This is a Windows Forms application, so no device and no web service.
The OS is a German Windows XP - so there shouldn't be any issues regarding strong encryption. It even runs in Windows 2000 in our test VPC.
We're using SQL CE 2005.
Any ideas what I could check?
View 1 Replies
View Related
Oct 12, 2007
I have code that creates a SQL Mobile database on a server. It has worked in many environments, but I have one customer experiencing an issue. It will not create the database on their server. I would appreciate any thoughts.
The exact error message I get is "the operating system does not support encryption"
I am getting it on the line: SQLCeEngine.CreateDatabase()
Here is the code:
SQLCeEngine = New SqlServerCe.SqlCeEngine(SQLConnectionString)
ReturnValue += ": Declare new"
SQLCeEngine.CreateDatabase()
ReturnValue += ":Create"
SQLCeEngine.Dispose()
ReturnValue += ": Dispose"
Here is the error message I get from our application- the part after Err: is the actual error message from the system:
Data Source = D:EVADATAWebServiceDownloads est;Password=test;Persist Security Info=False;: Declare new:Error!:Err:The operating system does not support encryption.
When I go into SQL Express and create a SQL Mobile database using it, it can be created. So, I have to believe it can be done on the server, but I don't know why the code can not do it.
(e.g. FileConnect Object ExplorerServer Type: SQL Server compact Edition and create a database). The database is successfully created if I do it manually this way. It even creates fine if I select the 'Encrypt' button.
The machine is a Windows 2000 Server sp4 version 5.00.2195
SQL 2000 is installed
SQL 2005 Express is installed
I ran the SQLServerCE31-EN.msi file and it is installed. (I have also re-run and repaired it)
I have also copied over the newest version of our code from scratch.
SQL Server mgmt Studio: 9.00.3042.00
MDAC 2000.085.1128.00
MSXML 2.3 3.1 4.0 5.0 6.0
IE 6.0.2800.1106
.NET Framework 2.0.50727.42
Operating System 5.0.2195
View 13 Replies
View Related
Oct 12, 2007
I have created an .sdf database on my Desktop - and am able to open and close it just fine from my application program.
Whenever I try to:
Open it with the same program but installed on a different PC,
or:
Open it from a program running as a service on the development PC, I get the error
"The operating system does not support the Encryption Mode provided."
The working above is from the Version 3.5 Beta, but the same problem occurs with Version 3.1.
The Error code in Hex is 80004005
I can't find any reference to fixing this error - any ideas?
View 2 Replies
View Related
Apr 29, 2008
It is simple question, just slipped out of my mind at this time...... how do we change Security Context for 2005 version from network to local system.
thanks,
View 1 Replies
View Related
Feb 24, 2006
hi i am using asp .net 1.1
i have deployed my application on server where sql server 2005 exists but if i try to connect to sql server from my development machine then it is not connecting and gives me error when
conn.open()
in my sql server it is windows authentication.
the error is general network error check network docs.
i have tried timeout=0 and pooling=false
but neither works please answer.
what should my connection string.
View 1 Replies
View Related
Jan 5, 2006
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
View 12 Replies
View Related
Jun 8, 2007
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
View 1 Replies
View Related
Dec 5, 2005
Reader Community
I've just started hosting my newly created Microsoft Visual Web Developer 2005 Express Edition web site. Unfortunately the Login group membership functions will not function correctly. Having contacted the web service hosting provider, They replied: "We do not support SQL express2005. The only way to use the extra functions of ASP.NET2 such as group membership is if it is using an SQL 2000 database to connect to. "
Is it possible to design web sites with Microsoft Visual Web Developer 2005 Express Edition that store membership details on an SQL 2000 database?
I've just paid £88 approx. $140 for a years subscription, have I chosen the wrong web service hosting provider?
Should I have designed the web site with a better web site design software tool that also makes designing membership login functionality easy, just as Microsoft Visual Web developer 2005 express edition?
Look forward to all comments?
Regards
Philip
View 1 Replies
View Related
Sep 30, 2004
Hello all,
We have a Windows 2003 Web Edition server serving a site through IIS. It connects to a Windows 2003 Standard Edition server running SQL 2000 SP3a.
This site receives the following error as seen in the topic:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
We've configured the server network utility to only allow TCP/IP connections. The connection string for the site is as follows:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
MM_connSpankMSSQL_STRING = "Provider=sqloledb;Data Source=SERVER_IP,1433;Network Library=DBMSSOCN;Initial Catalog=ourmaindb_1;User ID=ourmaindb_1;Password=hotcookies;"
%>
Any ideas or tips on solving this issue? We've noticed it is due to larger queries as smaller ones do work with no problems.
The servers are behind a BSD box running iptables, has 1433,1434 along with standard web ports wide open. Anything outbound is allowed.
Some further testing via ODBC on the IIS server improved things. No more connection pooling for the SQL Server driver allows for 1/3 of the query to run. Still 2/3s of it doesn't show up, and that general network error message appears.
Should have 330 rows if it works right.
View 2 Replies
View Related
May 19, 2004
Hi
While running a DTS, many times the error message: "[DBNETLIB][ConnetionWrite (WrapperWrite()).]General network error. Check your network documentation." appears.
Does somebody knows why?
I am running the DTS from a computer (not the server where the DTS is stored) and it is connected without any problem when this happens.
Thanks!!
Regards
Lautaro - Argentina.
View 4 Replies
View Related
Oct 4, 2007
Hi Every one,
I am using .Net 1.1 for my web application.
And my database server is SQL Server 2005.
My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,
General Network Error. Check your network documentation
I have also searched many articles and tried following solutions but nothing working
- connectiontimeout = 0, max pool size = 7500/100, pooling = false
- SSL disabling enforce security false as mentioned in microsoft kb article.
And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string)
Can any one please help me to solve this error?
With Regards,
View 3 Replies
View Related
May 26, 2007
Hi We have a written a error log in Global.asax. which capture below mentioned error in the prodcution server. Same applications is working fine in some locations and some loactions we are getting the error.Any body knows why this error is occurs.Any body knows why this error is occurs. Error Message:General network error. Check your network documentation.Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OpenAndLogin() at System.Data.SqlClient.SqlInternalConnection..ctor(SqlConnection connection, SqlConnectionString connectionOptions) at System.Data.SqlClient.SqlConnection.Open() at datalayer.sqldb.Execute(String ProcedureName, SqlParameter[] Parameters) at lms.User.GetUserDetails(String strUserid)ITs at LMS.Login.w_btn_Login_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
View 2 Replies
View Related
Oct 4, 2007
Hi,I am using .Net 1.1 for my web application.And my database server is SQL Server 2005. My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,General Network Error. Check your network documentation I have also searched many articles and tried following solutions but nothing working- connectiontimeout = 0, max pool size = 7500/100, pooling = false- SSL disabling enforce security false as mentioned in microsoft kb article. And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string) Can any one please help me to solve this error?
View 2 Replies
View Related
Feb 8, 2004
When I try to update the site setting, I get this Error and I don't know how to fix.
Server Error in '/DotNetNuke' Application.
--------------------------------------------------------------------------------
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
Line 281:
Line 282: myConnection.Open()
Line 283: myCommand.ExecuteNonQuery()
Line 284: myConnection.Close()
Line 285: End Sub
Source File: C:DotNetNukeComponentsAdminDB.vb Line: 283
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +721
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +196
DotNetNuke.AdminDB.UpdatePortalInfo(Int32 PortalId, String PortalName, String PortalAlias, String LogoFile, String FooterText, Int32 UserRegistration, Int32 BannerAdvertising, String Currency, Int32 AdministratorId, String ExpiryDate, Double HostFee, Double HostSpace, String PaymentProcessor, String ProcessorUserId, String ProcessorPassword, String Description, String KeyWords, String BackgroundFile, Int32 SiteLogHistory) in C:DotNetNukeComponentsAdminDB.vb:283
DotNetNuke.SiteSettings.Update_Click(Object sender, EventArgs e) in C:DotNetNukeadminPortalSiteSettings.ascx.vb:287
System.Web.UI.WebControls.LinkButton.OnClick(EventArgs e)
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Please Help!
Thank you,
dlouanis
View 2 Replies
View Related
Jan 9, 2006
I use sqlclient to connect directly from my mobile 5 pocketpc to a sql server 2005 database on my desktop.
I use a sqldatareader to traverse the results of a query that delivers 2 fields: (1) the filespec, and (2) the image field.
I use a filestream with a binary writer to write the contents of the image data to the pocketpc's storage card.
I have a test table with 10 images, not one more than 4 MB. I cannot complete a test run prior to receiving the general network error.
The pocketPC is connected via activesync to the desktop, and I connect to the database with:
Integrated Security=false;
user id=sa
password=admin.
Any help with this strange error would be greatly appreciated.
Wil
View 5 Replies
View Related
Oct 11, 2006
Hi I get a "General Network Error Check network documentation" error sometimes, but its only while insert or update statements are fired while selects keep working perfectly.
The Error details are as follows:
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream)
View 1 Replies
View Related
Aug 21, 2006
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
View 28 Replies
View Related
Sep 6, 2001
Does anyone know if SQL7 will work with Storage Area Networks(SAN's)? I've read that SQL2000 implements something called a Virtual Interface System Area Network (VI SAN) that allows communication with devices connected via a SAN.
My site is installing a SAN and I need to know if SQL7 can utilize those resources (Storage,etc) and how reliable if so.
Randy
View 1 Replies
View Related
Jan 29, 2004
I have files with area codes that are several years old. Everything I've seen about updating area codes deals with area codes that are current and are about to split in the near future. How would I go about bringing old area codes up to date?
View 8 Replies
View Related
Apr 14, 2008
Dear All,
i'm trying to publish a maintenance plan in sql server 2005.
but soon after right click and selecting a new maintenance plan, it is displaying an alert with "AgentXP's component" is turned off.
please let me know how to ON those services. i've read and followed the instructions but i was unable to find where exactly to start.
please guide me in this regard
my version of OS is sql server 2000 professional
my version of sql server is :Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 1 Replies
View Related
Feb 28, 2007
Hi, we are having a strange problem when trying to configure the surface area of my sql server 2005. When we open the tool the only nodes that appears are: Reporting Services and Integration Services. But the Database Engine node is not showing. What do we have to do to access the Database Engine node and configure Remote Connection.
Any help would be extremely appreciated...
View 12 Replies
View Related
Feb 20, 2008
Is it possible to display fields from 2 datasets in one table?
View 3 Replies
View Related
Aug 2, 2006
We have the need to determine surrounding counties of a particular county.
For example how can I determine, if I entered a zip code for Contra Costa and the property is also right on the line of alameda that Alameda is a neighboring county of Contra Costa
Could it be determined by the longitude and latitude of the zip code in comparison with the counties?
View 1 Replies
View Related
Apr 16, 2008
Up til now i've been working with Access, i have only got a few weeks experience with SQL, so dont eat me.
I set up a SQL Database, and placed it into my site, etc, set up all the connection strings. It connects fine, but cannot log in. It tells me;
Cannot open database "C:USERSJAREDDESKTOPSTYXSTYX - BUILD 2APP_DATASTYXDB.MDF" requested by the login. The login failed.Login failed for user 'Webdev01Jared'.
I'm running Vista (x86), and SQL Server 2005 Express SP2, and i'm aware that Vista by default does not automatically enable remote access in SQLExpress for local admins.
So i go into Surface Area Configuration. I've read about it, and it's two steps, Click "Add New Administrator", then select the priveleges in the left box and click the button to put them in the right box. Simple enough, and it works, sure, click the button, it moves across, done.
But. Hit OK. It's done nothing, i still cant connect, and the cherry on top; open up the SAC again to check and there is nothing in the right box. It's exactly how it was before i changed it. The problem is definitely this, and not the account, as i can log in for SQL Management Studio just fine, with the same windows authentication credentials.
Thanks in advance.
View 3 Replies
View Related
