When I try to open a DTS package I get the message above. These packages were written by other developers.
Other packages on this server state that the Parameter is incorrect when I try to open them.
Any ideas?
Jim
Hi,
I use the DTS 2000 Migration Wizard to migrate one of the DTS 2000 packages to SSIS. The migration failed with the following error message:
LogID=17
#Time=6:31 PM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)
Looking at the call stack, it looks like COM wrapper fails on SaveToXML. Can someone tell me how I should workaround this problem?
Thanks,
Bobby Fu
Hello,
I have a package that copies data FROM an MS Access database table to a SQL Server 2005 table. 'Run64BitRunTime' has been set to 'False'. The package has been saved to SQL Server. I have a Job that runs the package using an operating system command. The following is the command syntax:
€œC:Program Files (x86)Microsoft SQL Server90DTSBinndtexec.exe€? /SQL "RebatesRebates_TotalSecurity" /SERVER bwdbfin1 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
I created the package on a machine other than bwdbfin1. I can run the package from Visual Studio. I can run the package from Integration Services. I have sysAdmin rights on bwdbfin1. I've tried running the job using two different proxy accounts and the sql agent account. I have the location of the Access database. No matter what I do, the Job fails with the following error:
The process could not be created for step 1 of job 0xD947EF76ACD96340B12279FEDDC580CE (reason: The system cannot find the file specified). The step failed.
I have an identical package that copies data TO an Access database. The database addressed in that package and this package are in the same location. The 'CreatorName' of both packages is the same. I have logging enabled for every category, but nothing is written to the sysdtslog90 table when the Job runs. I set up error output in the DataFlow task, and have also tried to 'ignore' errors. I have searched the forum, done a web search, and I can't find a reason for the failure.
Is dtexec the file that is not found? If that were the case, then why can a Job run my other package?
Any ideas?
Thank you for your help!
cdun2
Hi,
I have a SQL Server Agent job set up to run a job that calls a dts package on the server.
When I run the DTS Package manually, everything works fine and does what it is supposed to do.
When I run the job, The job fails. If somebody had this error can you please help me out
I am getting following error in my job...
DTSRun: Loading...Error: -2147287038 (80030002);
Provider Error: 0 (0)
Error string: The system cannot find the file specified. Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts.hlp
Help context: 713.
Process Exit Code 1. The step failed.
could you please let me know what is the possible cause for the above error.
Many Thanks,
Madhu
In Management Studio i highlight my query and then click on 'Analyse query in Database Engine Advisor' but i get the following error message: "Failed to connect to an IPC Port: The system cannot find the file specified". Seems like if I reboot my computer it works one time then get the same error on the second time.I'm running developer edition with service pack 2.
View 8 Replies View RelatedHi,
I have a package which calls another package. It had been working fine for a while. Recently I changed the connection managers' names. Everything in the parent package works fine. Database has been updated correctly. But when it comes to calling the child package it generates :
OnError,CRPRCHMSQCZ,,Execute AMSClientAgentMaintenance,,,3/8/2007 5:49:38 PM,3/8/2007 5:49:38 PM,-1073602332,0x,Error 0x80070002 while preparing to load the package. The system cannot find the file specified.
. (there is a period here instead of a file name)
I tested the child package on the server. It works fine. I connected the child package to the Execute Package Task by selecting from the packages on the server. So it is there for sure. Connection manager's name is read from the .dtsConfig. Child package is executed from my development machine but not on the server. I made a small test package just to call this child package, it generates the same error...
Any help is appreciated
Gulden
I know there are already several bug submissions on this error, and I am sure the cryptoAPI team is working to resolve this issue.. However... Is it possible that the CAPICOM update (KB931906) could have contributed to this issue? In my instance, I installed SQLServer 2005 Express w/ Adv Tools SP2 after a freash XP install. I checked it out, and everything worked fine. I updated windows (online) and now it gives this error. In fact, I cannot even run the un-install because the setup utility also hits the following error (as taken from the log file):
Microsoft SQL Server 2005 Setup beginning at Wed Jan 16 12:47:35 2008
Process ID : 576
d:97352a1d146f8bca5542016500a05210setup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2008/0/16 12:47:35
Complete: LoadResourcesAction at: 2008/0/16 12:47:35, returned true
Running: ParseBootstrapOptionsAction at: 2008/0/16 12:47:35
Loaded DLL:97352a1d146f8bca5542016500a05210xmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2008/0/16 12:47:35, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Wed Jun 14 16:28:04 2006
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "576"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2008/0/16 12:47:35
Complete: ValidateWinNTAction at: 2008/0/16 12:47:35, returned true
Running: ValidateMinOSAction at: 2008/0/16 12:47:35
Complete: ValidateMinOSAction at: 2008/0/16 12:47:35, returned true
Running: PerformSCCAction at: 2008/0/16 12:47:35
Complete: PerformSCCAction at: 2008/0/16 12:47:35, returned true
Running: ActivateLoggingAction at: 2008/0/16 12:47:35
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
00E2CFC0Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "576"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2
Since the Microsoft.SqlServer.Express.SQLEditors utilizes a crypto wrapper, givin the error above... would the CAPICOM update have affected things?
Brian Nichols
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View RelatedI tried all the INFORMATION_SCHEMA on SQL 2000 andI see that the system tables hold pretty much everything I aminterested in: Objects names (columns, functions, stored procedures, ...)stored procedure statements in syscomments table.My questions are:If you script your whole database everything you end up havingin the text sql scripts, are those also located in the system tables?That means i could simply read those system tables to get any informationI would normally look in the sql script files?Can i quickly generate a SQL statement of all the indexes on my database?I read many places that Microsoftsays not to modify anything in those tables and not query them since theirstructure might change in future SQL versions.Is it safe to use and rely the system tables?I basically want to do at least fetching of information i want from thesystem tables rather than the SQL script files.I also want to know if it's pretty safe for me to make changes in thesetables.Can i rename an object name for example an Index name, a Stored Procedurename?Can i add a new column in the syscolumns table for a user table?Thank you
View 4 Replies View RelatedWindows 2000 Server SP4 + SQL Server 2000 Enterprise Editon SP3,RAID5.
the windows event log give the following error information:
I/O error 2(The system cannot find the file specified) detected during write at offset 0x0000010c6c4000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdataGJSZBANK_Data.MDF'.
I have searched microsoft knowledge base and got this article:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;828339
but don't understand some contents in the topic:
For example, if you encounter the following error message in the SQL Server Errorlog file, SQL Server encountered operating system error 2 when it uses a Windows API call to write to the tempdb primary database file:
Error: 823, Severity: 24, State: 4
I/O error 2(The system cannot find the file specified.) detected during write at offset 0x00000000284000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdata empdb.mdf'
Because SQL Server has already successfully opened the file and did not receive an “Invalid Handle” error, the error is likely being raised in a lower-level kernel software component, such as the file system or a device driver. This problem does not indicate a problem in SQL Server, and it must be investigated as an issue with the file system or a device driver that is associated with the file.
Does that mean this is not a SQL Server error?
Does that mean something wrong with my operating system? or something wrong with my hard disk?
Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
1. What could be wrong?
2. How do I fix it?
There is a index: CustomerInfo_1
with keys: customerId, EnteryDate DESC
I could not find where the order of index key (i.e. whether the key is ascending or descending) is stored?
I tried system tables such as sysindexes and sysindexkeys tables. But could not find it.
Any help in this regard will be truly appreciated.
Thank you.
Regards,
Anuj Goyal
There is a index: CustomerInfo_1
with keys: customerId, EnteryDate DESC
I could not find where the order of index key (i.e. whether the key is ascending or descending) is stored?
I tried system tables such as sysindexes and sysindexkeys tables. But could not find it.
Any help in this regard will be truly appreciated.
Thank you.
Regards,
Anuj Goyal
In 2000 you could look at templates and find templates for global or system functions where are they in 05?
View 1 Replies View RelatedI have had a development XP workstation with RS2000 and IIS sending reports via email for 6 months straight with no problems.
Today my subscriptions are failing with
Failure sending mail: The system cannot find the path specified.
Been searching and digging for hours, and if anyone has any ideas they are greatly appreciated.
Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
1. What could be wrong?
2. How do I fix it?
How can I find out if SSRS 2005 service Pack 2 is been installed on my system?
View 4 Replies View RelatedHi,
I am working on a .dll which need to access .sdf ( sql server mobile db). In my project, I added a reference "System.Data.SqlServerCe.dll". The dll is located in C:Program FilesMicrosoft Visual Studio 8Common7IDE.
I am able to compile the project. Then I created a Unit project for this dll file. In Unit project, I added the same reference.
Now the magic things happen. The compiling was failed. I got "Error 1 The type 'System.Data.Common.DbConnection' is defined in an assembly that is not referenced. You must add a reference to assembly 'System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'. C:VS2005MobileDBUnitMobileDBProjectUnitMobileDB.cs 50 13 UnitMobileDBProject".
I don't understand how come the same .dll could pass in a dll project but failed in unit test project. And I never saw the System.Data.SqlServerCe display in ".Net" Section of Add reference. But in my office, I installed same version of VS2005 for software tester. I could see the System.Data.SqlServerCe display in the ".Net" section of Add Reference.
Please help me to fix this problem. Thanks.
I'm copying files to a folder with the naming convention as follows in the source folder:
CM_ABC_MY_TEST.txt
In the destination folder, this filename needs to appear as:
CM_XYZ_MY_TEST.txt
In my File System Task, I'm pretty sure I'm going to need an expression with a replace, substring, etc. But am having a hard time nailing down the exact syntax.
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
@[User::Variable] +(DT_WSTR,4) YEAR( GETDATE() )+"0"+(DT_WSTR,2) MONTH( GETDATE() ) + (DT_WSTR,2) DAY( GETDATE() )
The result:
C:Documents and SettingsmroushDesktopOSU20060818
the 20060818 part will change everyday ie.(tomorrow will be 20060819, next day 20060820 and so on.)
I am having an issue with the File System Task.
I was wondering if there is a way to 'Move File' with the File System Task inside of a For Each Loop container but to dynamically set the Destination path variable.
Currently, this is what I have:
FileDestinationPath variable - set to C:TestFiles
FileSourcePath variable - set to C:TestFiles
FileNameAndLocation variable - set to blank
For Each Loop Container €“ Iterates through a folder C:TestFiles that has .txt files in it with dates in the file name. Ex: Test_09142006.txt. Sets the file path (fully qualified) to the Variable Mapping FileNameAndLocation.
Script Task (within For Each Loop, first step) €“ Sets the FileDestinationPath to the correct dated folder within C:TestFiles. For example, if the text files I want to move are for the 14th of September, it takes FileDestinationPath and appends the date folder to the end of it. The text files have a date in the file name (test_09142006.txt) and I am picking this apart (from FileNameAndLocation in the For Each Loop) to get the folder date. (dts.Variables(€œUser::FileDestinationPath€?).Value = dts.Variables(€œUser::FileDestinationPath€?).Value & €œ€? Month & €œ_€? & Day & €œ_€? & Year & €œ€?) which gives me €œC:TestFiles 9_14_2006€?.
File System Task (within For Each Loop, second step) €“ This is where the action is supposed to occur. I want it to take the FileDestinationPath and move the FileNameAndLocation file (from the For Loop) into this folder for each run.
Now as for my problem. I want this package to run everyday but it has to set the FileDestinationPath variable dynamically according to that day€™s date. Basically, how do I get this to work since I can€™t hard code the destination path variable from the start? I have the DestinationVariable on the File System Task set to the FileDestinationPath variable, after the script task builds it. However, using FileNameAndLocation as the SourceVariable on my File System Task tells me that the €œVariable €œFileNameAndLocation€? is used as a source or destination and is empty.€?
Let me know if I need to clarify further€¦...I may be missing something very simple. Any help would be greatly appreciated!
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
Historically I've always written a VB script to copy a file from a sharepoint library. I don't like this method because I have to input a username & password in the script and maintain a config file.
Yesterday I was playing around with using a file system task. The sharepoint file has a UNC path so why not? I created a simple test package with a single file system task that copies the sharepoint file (addressed via UNC) to another network location. Package runs fine locally.
I try running on our utility server but am getting a "The file name [SHAREPOINT UNC PATH] specified in the connection was not valid" error. Package is running with a proxy on the server and the proxy account has the same permissions to the sharepoint site (so far as I can tell) as me.
I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.
Any way I can recover it?
Thanks.
I have created a File System task which is contained in a Foreach Loop Container. I have .bak files that are populating a directory from a maintenance backup plan.
There is a point where I need to delete the .bak file's after I've zipped them all up.
How do I set the SourceVariable to read through the directory and pick up just the .bak file's in the directory to delete.
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies View RelatedHi,
I am facing a problem on a server which has raid 5 solution (3 disks), the raid controller went down 2 of the disks were off in the Bios.
We added the 3 disks to a different server identical in brand and architecture, the raid controller was able to reconfigure the virtual drive H:.
All files were there, we installed sql server 2005 on the new server, but when we tried to attach the database we got the error below:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'myserver'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0x00000000af0000 in file 'C:Datamylog_log.LDF'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Operating system error 38(Reached the end of the file.) on file "C:Datamylog_log.LDF" during ReadFileHdr.
Could not open new database 'mydb'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 823)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=823&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I tried the following steps but it always failed:
- create a new db with the same name of the lost db;
- put the db in emergency mode;
- stop sql service and replace the mdf file;
- start sql service;
- Run Dbcc checkdb('mydb')
we got the error below:
Msg 945, Level 14, State 2, Line 1
Database 'ism0506' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
Any HELP please ?
Thanks,
Tarek Ghazali
Sql Server MVP
Hi
This should be incredibly simple and easy, but I can't find any examples of how to do this.
I just want to make a File System Task move a file, and have the destination be filename + date and time. For example \serversharefilename02072007.txt
What syntax do I use in a variable to make this work?
Thanks
Ok so I have some dynamic sql to delete a file that is created via sql earlier on. It is to provision a copy of a database to an instance on link server. Everything works great and the files used to delete. Now, with no code changes it is throwing a syntax error. I do a print of what the dynamic sql is creating before executing and then I copy / paste what was generated into command prompt and guess what!! The file deletes.
Here is the result on screen:
@DeleteBackupFileStatement: DEL adas16.clients.advance.localwip$AvionteAP_Template_893.bak /Q
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near ''.
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near ''.
Here is the code that creates the statement:
SET @DeleteBackupFileStatement = NULL
BEGIN
SET @DeleteBackupFileStatement = 'DEL ' + LTRIM(RTRIM(@BackupFile)) + ' /Q'
END
PRINT '@DeleteBackupFileStatement: ' + cast(@DeleteBackupFileStatement as varchar(400))
BEGIN
EXEC adasdb.master.sys.Sp_executesql
@DeleteBackupFileStatement
END
END
The value of @BackupFile is simply the path of the file with the file name, everything in the prepared statement with the exception of DEL and the switch at the end.
Hello
I want to move and rename a file and embed the date/time into it, so that each time the package runs a new file is created. For example MyFile_20060712_150000.doc.
Can someone give me a hint how to do this with the File Systen Task SSIS Control Flow Item?
Thanks for an early reply
Regards
Chaepp
Hi All,
I have a source files folder where the files generated everyday.
My goal is pick the latest file and copy this single file to another folder.
I used the Foreach loop container and got the latest file and stored the file name to a varible i.e. LatestFile
Then i want to use the File System Task to copy this to the destination.
On the beginning, I could not setup the Latestfile since I don't its name then, so when I setup the Source Connection property of the File system task, it is not allowed to leave the SourceVarible as blank!
Any suggestion?
Thanks
Micor
Could someone please instruct me on how to use the File System Task Editor to rename a file? I place control on control flow tab, change the operation to rename, from there I am not sure what to do.
View 29 Replies View RelatedI need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.