I have configured the system database backup using SQL Server 2005
Maintenance Plan. It was running properly quite some time with in 5 to
10 minutes. Suddenly I am getting this error "Process is terminated
due to StackOverflowException. The return value was unknown. The
process exit code was -2147023895". And the back up did not complete
for 55 minutes and finally it got failed. Somebody good help me out
pls.
rgs
Praveen
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
View 2 Replies View RelatedUsing SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
Hello!
Hopefully someone can help me.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
Internal I/O request 0x5FDA3C50: Op: Read, pBuffer: 0x0D860000, Size: 65536, Position: 25534864896, RetryCount: 10, UMS: Internal: 0x483099C8, InternalHigh: 0x0, Offset: 0xF1FF1E00, OffsetHigh: 0x5, m_buf: 0x0D860000, m_len: 65536, m_actualBytes: 0, m_errcode: 1450, BackupFile: \XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View RelatedHello,
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=398142&SiteID=1
Hello All,
I was wondering if anyone could recommend a good backup system for SQL Server (hardware&software)? Thanks.
hi,
I have just started a new job and they have nightly backups of the master, msdb and model databases.
But why would you need a nightly backup of the model database? surely the model database never changes, so would a one time backup not be sufficient?
Please advise me if I am incorrect
Cheers
I found out our system backup system database every week, which occupy a lot of space. Is it necessary?
Thank you.
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
I have to restore a database from a directory structure backup run by NT SERVER not SQL SERVER. I am not sure of the database size structure or whethter it has a log device. I am desperate for any advice on methods of restoring this in a safe manner.(it is a live production DB)
Thanks in advance.
Barry.
Is there a Systems Table that tells you whether or not the backup job completed or not? Help?
'
How do I prevent someone from backing up the data / copying the mdf and then mounting it from a different server or instance to gain access to the DB.
I do not have control over the physical file.
Basically, I want to make sure that only authorized applications and users can access the data.
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I have been researching on how to cleanup four backup system files located in the MSDB database. I currently have approximately 1 million rows in each of these tables which is making my MSDB database to be 4 gig in size. I cannot find any instructions on how to gracefully clean these tables up or what to do to keep the number of rows down in these tables. The tables are backupfile, backupmediafamily, backupmediaset, and backupset. Thanks.
View 1 Replies View Related
My Vista system hangs immediately after I insert the second blank DVD. I'm doing a simple backup of my user files. I'm using Vista Premium, fully up to date with patches, minimal software installed because this system is 100% used as a Media Center. Hardware is off the shelf HP Media Center m8067n.
I checked Microsoft knowledgebase and no other similar cases popped up. Is anyone else experiencing this?
Is this possible?
here is the situation. I have a DB on one system. I back it up and then restore it to a second system. This second system I run reports off of and I want to create custom views that do not exist on the original system. Can I restore the
backup DB from the remote system without wiping out the custom views on the local system?
I have to do this this way as they won't let us create the views we want on the remote system so the only way we have access to run the reports is by restoring the backup locally.
TIA!
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
I got the backup failed with error 665.
We have a scheduled weekly full backup job running through maintenance plan. We are using Sql 2008r2. Our backup server is windows 2008R2. There is plenty of space in the backup server but still my database full backup failed with the following error.
Executing the query "BACKUP DATABASE [Test] TO DISK = N'C:fullbackup." failed with the following error: "Write on "C:fullbackup est_backup_2015_04_12_200003.bak" failed: 665(The requested operation could not be completed due to a file system limitation) BACKUP DATABASE is terminating abnormally.
Hello,
I have MS SQL 2005 server with 300+ databases on it. The application is set up that way that it creates a new database as needed (dynamically). Do not ask me why - I hate this design... So, it can create 3-4 databases a day (random time).
I've scheduled full backup of all databases to run once at night, and it runs just fine. Besides that, I have scheduled tran logs backup of all databases to run every hour. This backup fails from time to time with the following error:
Executing the query "BACKUP LOG [survey_p0886464_test] TO DISK = N'D:\backups\log backups\survey_p0886464_test_backup_200708072300.trn' WITH NOFORMAT, NOINIT, NAME = N'survey_p0886464_test_backup_20070807230002', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "BACKUP LOG cannot be performed because there is no current database backup.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
So, I think what happens is since my full backup of all databases are scheduled to run only once at night, and tran logs every hour, when new database is created during the day, there is no full backup for it, that is why tran logs backup fails. Becuase after the failure, if I run full backup again, then tran log runs just fine afterwards.
I am new to MS SQL Server, I am mostly working with Sybase IQ. Do you know if I can "trigger" full backup every time when new database created to avoid tran lof failure?
Or is it possible to schedule full backup to run if tran log backup fails?
Any advice will be much appreciated.
We are using sql server 2005 Enterprise Edition with service pack1
I got the following error messages in the SQL log
The operating system returned error 21(The device is not ready.) to SQL Server during a read at offset 0x00000000090000 in file '....mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
fcb::close-flush: Operating system error 21(The device is not ready.) encountered.
I got these errors for about 2 hrs and after that I see these messages in the sql log
Starting up database ' '
1 transactions rolled forward in database '' (). This is an informational message only. No user action is required.
0 transactions rolled back in database ' ' (). This is an informational message only. No user action is required.
Recovery is writing a checkpoint in database ' ' ( ). This is an informational message only. No user action is required.
CHECKDB for database '' finished without errors on (local time). This is an informational message only; no user action is required.
Can anyone please help me in troubleshooting this issue. Why this migh have happened.
any help would be appreciated.
Thanks
Hi there
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
Any idea's thanks.
HI ,
This is a problem I encountered when I had to detach a database file (type .mdf):
1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.
2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful
3) However when I tried reattaching the database file, I got this error:
CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'
Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?
Thanks much
Tonante
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
Windows 2000 Server SP4 + SQL Server 2000 Enterprise Editon SP3,RAID5.
the windows event log give the following error information:
I/O error 2(The system cannot find the file specified) detected during write at offset 0x0000010c6c4000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdataGJSZBANK_Data.MDF'.
I have searched microsoft knowledge base and got this article:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;828339
but don't understand some contents in the topic:
For example, if you encounter the following error message in the SQL Server Errorlog file, SQL Server encountered operating system error 2 when it uses a Windows API call to write to the tempdb primary database file:
Error: 823, Severity: 24, State: 4
I/O error 2(The system cannot find the file specified.) detected during write at offset 0x00000000284000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdata empdb.mdf'
Because SQL Server has already successfully opened the file and did not receive an “Invalid Handle” error, the error is likely being raised in a lower-level kernel software component, such as the file system or a device driver. This problem does not indicate a problem in SQL Server, and it must be investigated as an issue with the file system or a device driver that is associated with the file.
Does that mean this is not a SQL Server error?
Does that mean something wrong with my operating system? or something wrong with my hard disk?
Hello,
When i run text data through OPENXML which has data more than 3956 charcters i get the following error .
Server: Msg 6603, Level 16, State 1
XML parsing error: System error: 265926
Microsoft has the following fix..
http://support.microsoft.com/default.aspx?scid=kb;EN-US;285006
But I already have SQL Server 2000 service pack 3 and MDAC 2.7 service pack 1 refresh . I did upgrade to sql server 2000 Service Pack 3a with no luck. I was wondering if any one faced a similar situation ....
Thanks!!!
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
I do not know how to explain this question.
I have this procedure that does a lot of temp table selecting, some insert into tables, and it the end it gives out a table as a result. The thing is, when i run it through query anayzer, it all goes smoothly. When I run it through code (c#), i get a "System Error" message. Does anyone know why this is so?
(p.s. nocount is off)
Thanx.
i am not able to connect to sql server.
when i run Net View \servername
i get "system error 5 has occurred. access denied" .
what does this mean? my (client) machine has win 2000 prof. installed and the server machine has win nt server on it
Hi SQL TEAM
Can someone please assist, we have a Database roughly 10GB in size,
For the past 2 days now we get the following errors.
////////
FCB::Open failed: Could not open file D:MSSQL.1MSSQLDataHelpdesk.mdf for file number 1. OS error: 32(error not found).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
////////
FCB::Open: Operating system error 32(error not found) occurred while creating or opening file 'D:MSSQL.1MSSQLDataHelpdesk.mdf'. Diagnose and correct the operating system error, and retry the operation.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
////////
Can someone tell me what is causing this error?
Whats happening:Error#: 40002Error Item: 01000: [Microsoft...][ODBC...][SQL...]The Statement hasbeen terminated. > GETID 'INSERT INTO Table(Column1, Column2, Column 3,Column4, Column5, Column6) VALUES("","Value1","Value2","Value3","Value4","Value5")'Error Message: 01000: Microsoft...][ODBC...][SQL...]The statement hasbeen terminated.Active Form: frmFormForm Name:---GETID Stored Procedure:---CREATE PROCEDURE GETID @strsql text ASPRINT cast(@strsql as varchar(4000))EXEC(" "+@strsql + " select @@identity as id")GO---Anyone know what could be causing it? The database has changed - thefrontend code hasn't, so it has to be a database problem. Whathappened was a few tables became incorrect so we restored them from abackup. Everything else seems to work, apart from adding a new recordto this table.You can edit current records etc..just not add.Thanks in advance,
View 1 Replies View Related