System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
View 2 Replies View RelatedWe are using sql server 2005 Enterprise Edition with service pack1
I got the following error messages in the SQL log
The operating system returned error 21(The device is not ready.) to SQL Server during a read at offset 0x00000000090000 in file '....mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
fcb::close-flush: Operating system error 21(The device is not ready.) encountered.
I got these errors for about 2 hrs and after that I see these messages in the sql log
Starting up database ' '
1 transactions rolled forward in database '' (). This is an informational message only. No user action is required.
0 transactions rolled back in database ' ' (). This is an informational message only. No user action is required.
Recovery is writing a checkpoint in database ' ' ( ). This is an informational message only. No user action is required.
CHECKDB for database '' finished without errors on (local time). This is an informational message only; no user action is required.
Can anyone please help me in troubleshooting this issue. Why this migh have happened.
any help would be appreciated.
Thanks
Hi there
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
Any idea's thanks.
I am trying to attach a database. But I am receiving below error:
Unable to open the physical file "D:databasepc.mdf". Operating system error 5: "5(Access is denied.)".
I have added service accounts to administrator group.
I have provided full control to service account on the D drive and on the .mdf file also.
My self has full permissions on the drive and .mdf file, and I am in administrator group.
Restarted the SQL Server services.Still same error.
I am trying to attach a database to SQL 2005. This database has not previously been attached. I have only just installed SQL.
Â
I get the following message: Unable to open physical file "C:ArrowSQLArr@DataArrow_data.mdf" Operating system error 5: "5(error not found)" (Microsoft SQL Server: Error 5120)".
Â
I have loaded SQL and the database fiel and directory with the same user account which is a local administrator on this machine. I have checked that I have read/write access to the file.
Â
The machine runs Windows Vista Business. SQL has SP 2 loaded. What causes this?
Hello,
We are trying to attach a database in Sql Server 2005 Express on Windows Vista.It will Show the following Error.
"Unable to open the physical file "Test.mdf". Operating system error 5 :". And then we installed the SQL Server 2005 Service pack 2. This error again comes.Could you please give me the steps to resolve the problem.
Thanks,
Mahesh
Hello!
Hopefully someone can help me.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
Internal I/O request 0x5FDA3C50: Op: Read, pBuffer: 0x0D860000, Size: 65536, Position: 25534864896, RetryCount: 10, UMS: Internal: 0x483099C8, InternalHigh: 0x0, Offset: 0xF1FF1E00, OffsetHigh: 0x5, m_buf: 0x0D860000, m_len: 65536, m_actualBytes: 0, m_errcode: 1450, BackupFile: \XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View RelatedI have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Hi everybody,
We are developing Asp.Net Application in following environment.
Windows 2003
Dot Net 2003
SQL Server 2000
Problem :
We have team of four people. We made one machine as database server and rest of the people trying to connect to that database server. we are getting error "SQL server not found.".
We are using following string as a connection string.
"DATA SOURCE=192.292.7.105;DATABASE=xxx;User ID=xxx;password=xxxx"
We have tried same connection string with the VB.Net program. It is working fine.
But when we are trying same string in the web application. It is giving me the above mentioned error.
Can any one help me ?
Thanks is advance.
From
Jigar Shah
I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.
Any way I can recover it?
Thanks.
Hello,
we have asp.net apps on a windows 2003 server that connect to an instance of sql server 2005 enterprise edition on another windows 2003 server. We get this error at random times. Anyone know what could be causing it?
System.Web.HttpUnhandledException: Exception of type System.Web.HttpUnhandledException was thrown. ---> System.Data.SqlClient.SqlException: SSL Security error. at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) at System.Data.SqlClient.SqlConnection.Open()Thanks
Hi there, i copied some insert code from one page to another and it keeps throwing me this error, i was wondering if anyone can help me out. Here is the error
System.Data.SqlClient.SqlException: The name "Credit" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Admin_expenses.Button1_Click(Object sender, EventArgs e) in d:hostingmemberashdfhtdocswwwAdminexpenses.aspx.cs:line 40
This is my code, i cant see anything obvious and as i said i just copied it across, the only things changed were the names and the sqlstringprotected void Button1_Click(object sender, EventArgs e)
{decimal intamount = Convert.ToDecimal(txtAmount.Text);
string sConnectionStringExpense = "Data Source=xxxx;Initial Catalog=xxxx;User ID=xxxx;Password=xxxx";SqlConnection objConnExpense = new SqlConnection(sConnectionStringExpense);
using (objConnExpense)
{
objConnExpense.Open();string sqlExpense = "INSERT INTO tbl_expenses (expense_amount, expense_payment_type, expense_type, expense_description) " +
"VALUES (" + intamount + "," + ddlPaymentType.SelectedItem + "," + ddlExpenseType.SelectedValue + "," + txtDescription.Text + ")";SqlCommand objCmdExpense = new SqlCommand(sqlExpense, objConnExpense);
try
{
objCmdExpense.ExecuteNonQuery();
}catch (Exception ex)
{lblcomplete.Text = "!!Adjust stock for product at location " + Convert.ToString(ex);
}
finally
{
objConnExpense.Close();
}
}
Hello,
we have asp.net apps on a windows 2003 server that connect to an instance of sql server 2005 enterprise edition on another windows 2003 server. We get this error at random times. Anyone know what could be causing it?
System.Web.HttpUnhandledException: Exception of type System.Web.HttpUnhandledException was thrown. ---> System.Data.SqlClient.SqlException: SSL Security error.
at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnection.Open()
Thanks
Hi,
I am getting an time out expired error while import dbf files to the database.. In this upload one file had 379 records.. and it inserts it into the few tables and then i get the above error..in my event viewer.
Error: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
No Changes made to the Plan table.
Inserting records(s) in Plan table.
No Changes made to Plan table.
Updating changes to PlanStatementInfo.
Updated 1 record(s) in PlanStatementInfo.
Inserting new records into PlanStatementInfo.
No new records were added to PlanStatementInfo.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(SqlConnection connection, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, String spName, Object[] parameterValues)
at icc.BaseClasses.DL.DLImportPlan.Import(Int32 ClientId, Int32 PeriodId, Int32 UserId) in C:Documents and SettingsMy DocumentsPlanStatementsImportDLDLImportPlan.cs:line 116
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.cs:line 116 --this is where i am calling my sproc...
any help will will appreciated
Thanks,
Karen
hi i am using asp .net 1.1
i have deployed my application on server where sql server 2005 exists but if i try to connect to sql server from my development machine then it is not connecting and gives me error when
conn.open()
in my sql server it is windows authentication.
the error is general network error check network docs.
i have tried timeout=0 and pooling=false
but neither works please answer.
what should my connection string.
Hi guys,
Everything seems to be fine, can browse the DB from VS, Preview data works fine in dataset, and the page works fine before adding any SQL DB code.
I draged n dropped a new DropDownList, Bind it to an object from dataset. And when I want to run the page I get this error !!!
I appreciate any help.
Thanks, Mehdi
Is it possible to connect to an Access database on my local drive, or does it have to an SQL database? Here is the error I am getting:
Server Error in ' 'Application.
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)Source Error:
Line 19: Dim ConString As String = ("Data Source=C:Inetpubwwwrootmessage.mdb")Line 20: Dim myDataAdapter As New SqlDataAdapter(SQLStatement.Text, ConString)Line 21: myDataAdapter.Fill(myDataSet, "tblMessage")Line 22: myDataGrid.DataSource = myDataSet.Tables("tblMessage")Line 23: myDataGrid.DataBind()
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
HI ,
This is a problem I encountered when I had to detach a database file (type .mdf):
1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.
2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful
3) However when I tried reattaching the database file, I got this error:
CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'
Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?
Thanks much
Tonante
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedHi SQL TEAM
Can someone please assist, we have a Database roughly 10GB in size,
For the past 2 days now we get the following errors.
////////
FCB::Open failed: Could not open file D:MSSQL.1MSSQLDataHelpdesk.mdf for file number 1. OS error: 32(error not found).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
////////
FCB::Open: Operating system error 32(error not found) occurred while creating or opening file 'D:MSSQL.1MSSQLDataHelpdesk.mdf'. Diagnose and correct the operating system error, and retry the operation.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
////////
Can someone tell me what is causing this error?
I created a .net console application within which I connect to a sql server (not local) as follows,
string conn_str = "Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=QuantEquitySql;Data Source=server name";
SqlConnection conn = new SqlConnection(conn_str);
conn.Open();
.
Everything works fine when I run it from my computer. When I try to run it from a network share I get the following error,
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I am using Visual Studio 2005 and .Net framwork v2.0.50727.
Does anybody know a fix to this problem?
Thanks
I have a report that uses some embedded custom code. The embedded custom code is a function that execute some sql query on a sql server database.Everything works fine in Visual studio. The report gets deployed on the server successfully, however when running the report from report manager i get the following error message :
The Hidden expression for the table €˜table1€™ contains an error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Here is the code :
************************************************************************
Public function get_field() as string
Dim myConnection As System.Data.SqlClient.SqlConnection
Dim myCommand As System.Data.SqlClient.SqlCommand
Dim data_reader As System.Data.SqlClient.SqlDataReader
Dim field(100) as string
Dim i as integer
Dim j as integer
Dim sql_field as string
Dim nbr_field as integer
Dim rtn_string as string
i = 0
sql_field ="Select field from mytable"
myConnection = New System.Data.SqlClient.SqlConnection("Datasource=xxx.xxx.xxx.xxmydatabase;Initial Catalog=mydatabase;User Id=user1;Password=password1;")
myConnection.Open()
myCommand = New System.Data.SqlClient.SqlCommand(sql_field, myConnection)
data_reader = myCommand.ExecuteReader()
While data_reader.Read()
if data_reader.HasRows then
field(i)= data_reader(0).ToString()
end if
nbr_field = nbr_field + 1
i= i+1
End While
data_reader.Close()
myConnection.Close()
for j = 0 to nbr_field -1
rtn_string = rtn_string + field(j) + ","
Next j
rtn_string = left(rtn_string,rtn_string.length-1)
return rtn_string
'return sql_cmd
'return yes_no
'return lkupfield
end function
******************************************************************
Why do i get the error message ?, is this related to Code Access Security issues with .net framework. if yes
how do i set the Security so the report server or report manager allows embedded custom code to be executed. Any advice ?
Chi
Hi, who have ever met the following errors, share an information of what could cause it??? I can't find any info that could help me find the reason. My DB went to SUSPECT mode and in the log file I got:
ForwardLogBlockReadAheadAsync: Operating system error 997(Overlapped I/O operation is in progress.) encountered.
Operating system error 997(Overlapped I/O operation is in progress.) on device 'd:MSSQLdataiservice_Log2.ldf' during ForwardLogBlockReadAheadAsync.
Error: 3414, Severity: 21, State: 1
Error: 9001, Severity: 21, State: 1
Unexpected error while commiting a ShrinkFile operation
/*************************/
What is weird the 997 error occured twice during last night and the DB went into suspect mode only after the sencond one.
The database restored but it's a second time for the last month just getting a bit annoying.
Thanks for any help
Dim
Hi,
I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer.
plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll"
Thanks !SqlConnection conn = new SqlConnection(DbConnectionString);
conn.Open();
SqlCommand cmd = conn.CreateCommand();
cmd.CommandText = "dbo.rqryTradesPRR";
cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ;
SqlDataReader reader = cmd.ExecuteReader();
while(reader.Read())
{
// have written something here
}
Thanks in advance !
Hi there. Could someone help me out.
I'm performing a log restore and getting the following error within the SQL Server Error Log.
During restore restart, an I/O error occurred on checkpoint file 'G:MSSQL.1MSSQLBackupdxsh.CKP' (operating system error 1784(error not found)). The statement is proceeding but cannot be restarted. Ensure that a valid storage location exists for the checkpoint file.
IT's a very basic Restore command and i do have not specified it to Restart.
Having checked the MS website for 1784 it suggests the following:
The supplied user buffer is not valid for the requested operation
Can anyone tell me what is wrong here and why it is creating a checkpoint file or even what it is and how to overcome the error message.
TIA
i believe this is the right thread... i recently had an issue where my xpstar.dll would not register and i read to fix the issue to reapply the SP so i installed SP4 i now am getting this error... please help!
2007-09-07 14:24:19.24 server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQLlogERRORLOG'.
2007-09-07 14:24:19.24 server SQL Server is starting at priority class 'normal'(4 CPUs detected).
2007-09-07 14:24:19.36 server SQL Server configured for thread mode processing.
2007-09-07 14:24:19.38 server Using dynamic lock allocation. [2500] Lock Blocks, [5000] Lock Owner Blocks.
2007-09-07 14:24:19.40 server Attempting to initialize Distributed Transaction Coordinator.
2007-09-07 14:24:20.44 spid3 Starting up database 'master'.
2007-09-07 14:24:20.49 spid3 Error: 823, Severity: 24, State: 5.
2007-09-07 14:24:20.49 spid3 ReadFileHdr: Operating system error 38(Reached the end of the file.) encountered.
2007-09-07 14:24:20.49 spid3 Error: 5159, Severity: 16, State: 3.
2007-09-07 14:24:20.49 spid3 09/07/07 14:24:20 Stack Overflow Dump not possible - Exception c00000fd E at 0x00449CA1
2007-09-07 14:24:20.49 spid3 Address=449ca1 Exception Code = c00000fd
2007-09-07 14:24:20.49 spid3 eax=ba65a0de ebx=00000002 ecx=42ba8740 edx=0bb0a830
2007-09-07 14:24:20.49 spid3 esi=00000001 edi=42ba8740 eip=00449ca1 esp=0bb09fc4
2007-09-07 14:24:20.49 spid3 ebp=0bb0a56c efl=00010212
2007-09-07 14:24:20.49 spid3 cs=1b ss=23 ds=23 es=23 fs=3b gs=0
2007-09-07 14:24:20.49 spid3 1: Frame: 0BB0A56C Return Address 00449CA1
2007-09-07 14:24:20.49 spid3 2: Frame: 0BB0AD88 Return Address 00449E10
2007-09-07 14:24:20.49 spid3 3: Frame: 0BB0AD9C Return Address 0044A14B
2007-09-07 14:24:20.49 spid3 4: Frame: 0BB0ADAC Return Address 0044A17D
2007-09-07 14:24:20.49 spid3 5: Frame: 0BB0ADF8 Return Address 0044A19B
2007-09-07 14:24:20.49 spid3 6: Frame: 0BB0AE18 Return Address 004CD11C
2007-09-07 14:24:20.49 spid3 7: Frame: 0BB0B2A8 Return Address 005ED83E
2007-09-07 14:24:20.49 spid3 8: Frame: 0BB0B2FC Return Address 00405473
2007-09-07 14:24:20.49 spid3 9: Frame: 0BB0B324 Return Address 00449357
2007-09-07 14:24:20.49 spid3 10: Frame: 0BB0B350 Return Address 00449329
2007-09-07 14:24:20.49 spid3 11: Frame: 0BB0B378 Return Address 00448EE1
2007-09-07 14:24:20.49 spid3 12: Frame: 0BB0B3E0 Return Address 0060CFF5
2007-09-07 14:24:20.49 spid3 13: Frame: 0BB0BC04 Return Address 006D0991
2007-09-07 14:24:20.49 spid3 14: Frame: 0BB0BC18 Return Address 0044A14B
2007-09-07 14:24:20.49 spid3 15: Frame: 0BB0BC28 Return Address 0044A17D
2007-09-07 14:24:20.49 spid3 16: Frame: 0BB0BC74 Return Address 0044A19B
2007-09-07 14:24:20.49 spid3 17: Frame: 0BB0BC94 Return Address 004CD11C
2007-09-07 14:24:20.49 spid3 18: Frame: 0BB0C124 Return Address 005ED83E
2007-09-07 14:24:20.49 spid3 19: Frame: 0BB0C178 Return Address 00405473
2007-09-07 14:24:20.49 spid3 20: Frame: 0BB0C1A0 Return Address 00449357
2007-09-07 14:24:20.49 spid3
2007-09-07 14:24:20.49 spid3 TotalPhysicalMemory = 2146951168, AvailablePhysicalMemory = 1552097280
2007-09-07 14:24:20.49 spid3 AvailableVirtualMemory = 376274944, AvailablePagingFile = 3696713728
A customer of my program is getting the SQL CE error message "The operating system does not support encryption".
I've seen several threads on this issue, but none of them seem to apply to my problem. This is a Windows Forms application, so no device and no web service.
The OS is a German Windows XP - so there shouldn't be any issues regarding strong encryption. It even runs in Windows 2000 in our test VPC.
We're using SQL CE 2005.
Any ideas what I could check?