System::ExecutionID Required In Eventhandlers
Mar 7, 2006
It is possible for a task to be executed multiple times in parallel. e.g. If a package is executed more than once using "Execute Package Task".
I understand that in the future the ForEach container will have the ability to execute all its iterations in parallel as well.
This is a problem. In the eventhandlers we know the SourceID of the container raising the event so we can tie together events raised by the same container but this simply isn't possible if the events are running in parallel.
An example of where we would want to do this is drop a record into a table when a container fires OnPreExecute and then update that record with the container duration time upon OnPostExecute. This does NOT work when tasks run in parallel.
The solution to this is very simple. As well as capturing System:ourceID, capture a new value, System::ExecutionID as well.
In the meantime, can anyone think of another way around this?
cheers
-Jamie
P.S.
I have raised this bug here: http://lab.msdn.microsoft.com/ProductFeedback/viewFeedback.aspx?feedbackId=FDBK46904 and have asked for the provision of System::ExecutionID. If you think its a good idea then plese go ahead and vote for it.
[Microsoft follow-up]
This is still a valid request. Does it need opening on Connect?
-Jamie
View 3 Replies
ADVERTISEMENT
Nov 15, 2007
Any help in understanding and working around this odd behavior is greatly appreciated!
I have the default SQL database logging enabled (to sysdtslog90).
I start my package with an ExecuteSQL task that writes most of the system variables to an execution log.
Included is the value of the System::ExecutionInstanceGUID variable (which I thought should match the standard SSIS logging executionid value).
I have an error handling ExecuteSQL task that updates my execution log with an end time and the task that failed.
This is right out of the ProjectREAL audit approach.
Problem with the Error ExecuteSQL update is that it is trying to match the SSIS log but cannot.
This is the SQL being used:
select top 1 @failureTask = source
from dbo.sysdtslog90
where executionid = @executionGuid
and (upper(event) = 'ONERROR')
and upper(source) <> @packageName
order by endtime desc
When I enable OnInformation event logging something interesting appears.
The ExecutionGUID changes during validation of my one Data Flow Task in the package YET the system variable does not get updated with the new value!!!!
Log Excerpt:
1 OnInformation DFT Load Customer Test B94FDA4C-46D9-4193-BD87-12CFCB31EA1A Validation phase is beginning.
2 OnInformation DFT Load Customer Test 282F7D2E-329A-49DB-90B6-838053114940 Validation phase is beginning.
3 PackageStart AuditSample 282F7D2E-329A-49DB-90B6-838053114940 Beginning of package execution.
4 OnPreExecute AuditSample 282F7D2E-329A-49DB-90B6-838053114940
5 OnPreExecute SCR Set Correct Execution GUID 282F7D2E-329A-49DB-90B6-838053114940
6 OnVariableValueChanged AuditSample 282F7D2E-329A-49DB-90B6-838053114940 ExecutionGUID
7 OnInformation SCR Set Correct Execution GUID 282F7D2E-329A-49DB-90B6-838053114940 System Variable - Package Name AuditSample Start Time 11/14/2007 8:56:26 PM ExecutionGuid b94fda4c-46d9-4193-bd87-12cfcb31ea1a
Please also reference http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=420279&SiteID=1
View 10 Replies
View Related
Jan 23, 2007
Can someone help me with this error, so the page can show the rocords, its works on my PC but not at my host.
I get this error:
Exception Details: System.Data.OleDb.OleDbException: No value given for one or more required parameters.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[OleDbException (0x80040e10): No value given for one or more required parameters.]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +267
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +192
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +48
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +106
System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) +111
System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +4
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +141
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
My code is:
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="CMS_Default.aspx.vb" Inherits="cmssystem_CMS_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="CM_form" runat="server">
<div>
<asp:GridView ID="GridView1" runat="server" DataSourceID="CMSqlDataSource">
</asp:GridView>
<asp:SqlDataSource ID="CMSqlDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:CMConnectionString %>"
ProviderName="<%$ ConnectionStrings:CMConnectionString.ProviderName %>" SelectCommand="SELECT [SiteMainID], [SiteMainIdentity], [SiteMainText] FROM [MainSiteText] ORDER BY [SiteMainID]">
</asp:SqlDataSource>
</div>
</form>
</body>
</html>
View 7 Replies
View Related
Apr 25, 2007
I have a server with 3 SQL Server named instances on it - servername, servername/TST and servername/GOLDSTD. I have several databases on the default instance (servername) but users cannot access the databases unless they are given system admin privileges to their login. This occurs using both SQL Server Logins and Windows authentication logins. If I move the database to a different named instance (servername/TST), the problem no longer exists and users can connect with dbo privileges. Any suggestions or is this typical for default instances? Thanks in advance for any help
View 8 Replies
View Related
Nov 27, 2006
Hello everyone
I'm logging the execution of my package into a SQL SERVER table. Everything works right. I'm also executing this package using a web service, I'd like to retrive the package's executionId after it is executed. By the way, i'm using a Microsft.SqlServer.Dts.Runtime.Package object but i haven't found any property that could give this.
any clue?
thanks a lot
View 3 Replies
View Related
Oct 30, 2006
I have enabled logging using database.
When I try to query the sysdtslog90 table using System::ExecutionInstanceGUID to link executionid - it is not matching.
Any resolution?
Thanks
View 7 Replies
View Related
Sep 8, 2006
Hi all,
does anyone know how to do event handlers in SSIS?
at the moment i've attached a send email tak to each failure from data flow tasks, but very hard to manage it.
was wondering how i can store the error message and maybe post it at the end of the project execution?
any help?? please
View 3 Replies
View Related
Nov 16, 2006
I ran into a pretty bizzare behavior in SSIS:
I am trying to set up a package with a built-in auditing. It has a OnPreExecute, OnPostExecute and OnError event handlers. I am trying to record when the package starts, completes, and the completion status. Each one of these event handlers has a script task that does the logging. I put in debug message boxes into each event handler script to understand what goes on. So here's the sequence of events:
1. When starting the package the OnPreExecute event fires. Right away it fires the second time. I'm guessing what happens here is the script task within the event handler fires its own OnPreExecute event - that's how the first message really pops up. The second message is generated by the actual package-level OnPreExecute event.
2. I have a condition within the OnPreExecute event handler which might set the task status to failure. You would expect the OnError handler to fire, right?.. Wrong! The package dies without firing either OnError or OnPostExecute event....
3. If i remove the condition in step 2, and force an error in the package body, i get an OnError event, and then 2 OnPostExecute events ( i guess for the same reason as in step 1).
What I'm trying to understand is why in the world my OnPreExecute and OnPostExecute events get fired by their own event handlers, yet when i fire other events within these event handlers the appropriate (other) event handler does not run.
Any ideas will be greatly appreciated.
View 9 Replies
View Related
Nov 21, 2006
Does anyone know how to create an eventhandler for a dataflow task specific events (OnPipelinePostEndOfRowset, OnPipelineRowsSent, etc.)? These events are available for logging via the standard logging infrastructure, but there seems to no eventhandler for them.
The reason I'm interested is that parsing information logged by these events using builtin log providers is not easy (eg., the number of rows sent gets burried somewhere in the message column (i'm using sql provider). I'd like to capture this information and record it cleanly in a custom ssis metadata database i'm building. Any ideas are welcome. Thanks.
-alex
View 8 Replies
View Related
Dec 13, 2007
My web project (ASP.NET 2.0 / C#) runs against sql server 2000 and uses the System.Data.SqlClient.using System.Data.SqlClient;
I use System.Data.SqlClient.SqlConnection and System.Data.SqlClient.SqlCommand to make the connections to the database and do selects and updates. Is it correct to continue to use these against SQL Server 2005? I ask because I made a connection string (outside of .Net) for SqlServer 2005 using the SQL native provider and it had the following - Provider=SQLNCLI.1 and any connection strings I had made (also outside of ASP.NET) fro SQL Server all used Provider=SQLOLEDB.1. This is why I wondered if there is a different SqlClient in .Net 2.0 for SQL Server 2005?
Cheers
Al
View 1 Replies
View Related
Mar 20, 2006
[Yes, I know I keep posting this, and I'm sorry for that. But I want someone to confirm that this is a bug and not by design. I feel it is very very important]
All,
I'd like someone from MS to confirm something for me if possible.
I've just come across a situation where a package that is restarted from a checkpoint fails to execute any of its eventhandlers if those eventhandlers are scoped to a parent container.
Is this a bug or by design? Either way I'm VERY worried about this because this is not in the least bit intuitive. This is the most dangerous bug that I have seen in RTM.
-Jamie
If you want a demo of this happening then download this package: http://blogs.conchango.com/Admin/ImageGallery/blogs.conchango.com/jamie.thomson/20060103Package1.zip
It doesn't need any configuration because there are no connection managers. You can just run it standalone.
Run it first time and it will fail but you WILL see msgboxes popped up by the eventhandlers. Go into "Script Task 2" and make the return value "Success" rather than "Failure".
Run it a second time. The package will complete successfully but NO msgboxes will pop up from the eventhandlers. They are not executing.
Reply here or email direct with any queries!
View 1 Replies
View Related
Mar 2, 2006
All,
I'd like someone from MS to confirm something for me if possible.
I've just come across a situation where a package that is restarted from a checkpoint fails to execute any of its eventhandlers if those eventhandlers are scoped to a parent container.
Is this a bug or by design? Either way I'm VERY worried about this because this is not in the least bit intuitive. This is the most dangerous bug that I have seen in RTM.
-Jamie
If you want a demo of this happening then download this package: http://blogs.conchango.com/Admin/ImageGallery/blogs.conchango.com/jamie.thomson/20060103Package1.zip
It doesn't need any configuration because there are no connection managers. You can just run it standalone.
Run it first time and it will fail but you WILL see msgboxes popped up by the eventhandlers. Go into "Script Task 2" and make the return value "Success" rather than "Failure".
Run it a second time. The package will complete successfully but NO msgboxes will pop up from the eventhandlers. They are not executing.
Reply here or email direct with any queries!
[Microsoft follow-up] This needs either fixing or explaining.
View 11 Replies
View Related
Aug 21, 2006
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
View 28 Replies
View Related
Mar 21, 2007
Reporting services is configured to use a custom security extension in the following Environment.
Windows xp
IIS 5.0
when i go to http://servername/reports , the UIlogon.aspx page loads fine and i enter username and password. but i get logon failed.
when i go to http://servername/reportserver , the logon.aspx does not load and i get the following error message :
"Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
any idea ? .
chi
View 6 Replies
View Related
Apr 3, 2007
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
View 8 Replies
View Related
Jan 29, 2007
Hello!
Hopefully someone can help me.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
Internal I/O request 0x5FDA3C50: Op: Read, pBuffer: 0x0D860000, Size: 65536, Position: 25534864896, RetryCount: 10, UMS: Internal: 0x483099C8, InternalHigh: 0x0, Offset: 0xF1FF1E00, OffsetHigh: 0x5, m_buf: 0x0D860000, m_len: 65536, m_actualBytes: 0, m_errcode: 1450, BackupFile: \XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
View 1 Replies
View Related
Jul 20, 2005
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies
View Related
Jul 5, 2007
Hello,
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=398142&SiteID=1
View 4 Replies
View Related
Jul 20, 2005
Hi,I have a few things on my databases which seem to be neither true systemobjects or user objects - notably a table called 'dtproperties' (createdby Enterprise manager as I understand, relating to relationship graphingor something) and some stored procs begining with "dt_" (some kind ofsource control stuff, possible visual studio related). These show up whenI use"exec sp_help 'databaseName'"but not in Ent. Mgr. or in Query Analyzer's object browser, and also notin a third party tool I use called AdeptSQL. I am wondering how thosetools know to differentiate between these types of quasi-system objects,and my real user data. (This is for the purpose of a customized schemagenerator I am writing). I'd prefer to determine this info with systemstored procs (ie sp_help, sp_helptex, sp_...etc) but will dip into thesystem tables if needed.Thanks,Dave
View 1 Replies
View Related
Oct 19, 2006
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
View 3 Replies
View Related
Nov 25, 2007
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
View 2 Replies
View Related
May 17, 2006
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
View 13 Replies
View Related
Apr 23, 2007
I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
View 3 Replies
View Related
Mar 12, 2008
I created a .net console application within which I connect to a sql server (not local) as follows,
string conn_str = "Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=QuantEquitySql;Data Source=server name";
SqlConnection conn = new SqlConnection(conn_str);
conn.Open();
.
Everything works fine when I run it from my computer. When I try to run it from a network share I get the following error,
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I am using Visual Studio 2005 and .Net framwork v2.0.50727.
Does anybody know a fix to this problem?
Thanks
View 3 Replies
View Related
Jun 20, 2007
I have a report that uses some embedded custom code. The embedded custom code is a function that execute some sql query on a sql server database.Everything works fine in Visual studio. The report gets deployed on the server successfully, however when running the report from report manager i get the following error message :
The Hidden expression for the table €˜table1€™ contains an error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Here is the code :
************************************************************************
Public function get_field() as string
Dim myConnection As System.Data.SqlClient.SqlConnection
Dim myCommand As System.Data.SqlClient.SqlCommand
Dim data_reader As System.Data.SqlClient.SqlDataReader
Dim field(100) as string
Dim i as integer
Dim j as integer
Dim sql_field as string
Dim nbr_field as integer
Dim rtn_string as string
i = 0
sql_field ="Select field from mytable"
myConnection = New System.Data.SqlClient.SqlConnection("Datasource=xxx.xxx.xxx.xxmydatabase;Initial Catalog=mydatabase;User Id=user1;Password=password1;")
myConnection.Open()
myCommand = New System.Data.SqlClient.SqlCommand(sql_field, myConnection)
data_reader = myCommand.ExecuteReader()
While data_reader.Read()
if data_reader.HasRows then
field(i)= data_reader(0).ToString()
end if
nbr_field = nbr_field + 1
i= i+1
End While
data_reader.Close()
myConnection.Close()
for j = 0 to nbr_field -1
rtn_string = rtn_string + field(j) + ","
Next j
rtn_string = left(rtn_string,rtn_string.length-1)
return rtn_string
'return sql_cmd
'return yes_no
'return lkupfield
end function
******************************************************************
Why do i get the error message ?, is this related to Code Access Security issues with .net framework. if yes
how do i set the Security so the report server or report manager allows embedded custom code to be executed. Any advice ?
Chi
View 7 Replies
View Related
Feb 10, 2007
Hi,
Im Designed a Webpage .It consosts of a Button, whenever i click on
Button report must generated.When the report is in my system report
generated successfully.when I try to access a report from other
system.I cudnot able to access report.Can any1 hlp me inthis aspect
.any procedure in order to access the report of other system.wht shud
be url for Reportserverurl and reportpath.In short
When i click on btn i shud get report of other system.what previleges shud be given for other system in other to access
With regards,
mahender
View 3 Replies
View Related
Jan 18, 2008
Hi,
I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer.
plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll"
Thanks !SqlConnection conn = new SqlConnection(DbConnectionString);
conn.Open();
SqlCommand cmd = conn.CreateCommand();
cmd.CommandText = "dbo.rqryTradesPRR";
cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ;
SqlDataReader reader = cmd.ExecuteReader();
while(reader.Read())
{
// have written something here
}
Thanks in advance !
View 2 Replies
View Related
Jun 19, 2008
I'm getting this error on a vb.net page the needs to execute two separate stored procedures. The first one, is the main insert, and returns the identity value for the ClientID. The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure. What am I doing wrong with including the identity value "ClientID" in the second stored procedure?
Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:
Line 14: If li.Selected Then
Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value
Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")
Line 17:
Line 18:
Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb Line: 16
Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert?
Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items
If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub
View 2 Replies
View Related
Aug 13, 2007
Hi,
I have developed a custom server control for .NET Framework 2.0. The server control has a property named BinaryData of type byte[]. I marked this property to be data bindable. Now, I have varbinary(Max) type of field in my SQL Database and I have used SQLDataSource and bound this varbinary(Max) field with the property BinaryData (byte[]) of my control. It is working fine as long as the data value is not NULL. Now, In my control, I have handled the NULL value so that no Exception is thrown. Still, when I bind this property using the SQLDataSource, I get Error "Unable to cast object of type 'System.DBNull' to type 'System.Byte[]'." I am not sure if I can do anything to stop this erro within my control. If it is not possible from the control, then what is the workaround that I can do in my ASPX page in order to stop this error ?
Thanks a lot in advance.
View 10 Replies
View Related
Dec 31, 2007
Hi, I got this field (dateSubmitted) having a data type of DateTime but I receive this error "Unable to cast object of type 'System.DateTime' to type 'System.String'." All value for dateSubmitted field are 12/27/2007 12:00:00 AM. cheers,imperialx
View 3 Replies
View Related
Oct 23, 2007
MS documentation is short when it comes to explanation of Quiescing a system for peer to peer replication. It seems that for any change the whole p2p machine has to stop ? This would cripple our development/releases... Is it really the case ?
Can all p2p nodes be quiesced except one, the one when I would also make changes ?
i.e. N1 <> N2 <> N3 I would stop inserts/updates/deletes for N1 & N3 and keep inserting/updating/deleting for N2 as I'm making schema change on N2 (additional table, additional field etc). Would it work ?
Also, would I need to stop selects for N1 & N2 ?
Thank you.
View 5 Replies
View Related
Jun 27, 2007
I need to create either a sql query or a procedure and i am not sure how to go about it.Simply i have two fields in a table. 1 for products values and 1 for how many of that product was purchased.What i am wondering is how to calculate this in a sql query.can someone help pleaseIlan
View 5 Replies
View Related
Aug 27, 2007
I am deleting a database but I am not seeing any entry in server logs or in event viewer. and same thing is happens when I am deatching a database.Can any body tell me the way through which I can know when a particualr database was deleted or deatched.
View 2 Replies
View Related