System.InvalidOperationException: There Is An Error In XML Document (11, 2). System.ArgumentException: Item Has Already Bee
Jul 5, 2007
Hello,
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
Hi,I am getting the Following Error Before Inserting data into the table..System.InvalidOperationException: The ConnectionString property has not been initialized. at System.Data.SqlClient.SqlConnection.PermissionDemand() at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at DAL.Insert_Query(Label lblError, String sqlQuery)----------------------------------------------------Below is my Code Dim dal As New DAL dal.P_ConnStr = Session.Item("ConnStr") dal.Insert_Query(lblError, "Insert Into app_Session ([SessionID],[TimeIn]) Values('" & Session.SessionID & "', '" & System.DateTime.Now & "')")
'------- 'DAL '------ Public Property P_ConnStr() As String Get Return ConnStr
End Get Set(ByVal value As String) ConnStr = value End Set End Property
Public Function Insert_Query(ByVal lblError As Label, ByVal sqlQuery As String) As Boolean Dim insertCommand As SqlClient.SqlCommand Try 'lblError.Visible = False insertCommand = New SqlClient.SqlCommand(sqlQuery, Me.CreateConnection) insertCommand.Connection.Open() insertCommand.ExecuteNonQuery() insertCommand.Connection.Close()
Return True
Catch ex As Exception lblError.Visible = True lblError.Text = ex.ToString insertCommand.Connection.Close() Return False
End Try
End Function ---------------------------------------------------------------------------How I can Resolve this Problem..
I wrote code that connects to a SQL Server database in VB .NET The program connects to the server and works fine.
dConnection = New SqlConnection(getCfgProperty(fPropDBConnection)) dConnection.Open()
However when I put my code on to a different machine (test server) the program can not open the connection. It gives an exception in the dConnection.Open() line:
System.InvalidOperationException: The ConnectionString property has not been initialized. at System.Data.SqlClient.SqlConnection.Open() at Project4.HowTo.Samples.ADONET.ReportDistributor.di stributeReports()
Connection string is correct.
Is there something that has to be configured on test server environment?
I am using a Foreach loop container to go thru all the files downloaded from the ftp site and I am assigning the file name of each file to a variable at the foreach loop level called filename. In the dataflow task inside the foreach loop container, I have a source script component that uses a flat file connection. The connection string of the flat file connection is set to the filename variable declared at the foreach loop level. However the script component has a error System.ArgumentException: Empty pathname is not legal.
Please let me know how to correct this? The connectionString property of the flat file connection is set to the complete filename including the path. Does a script component need to have a flat file name specified in the flat file connection that it is using? I need to have a script source component as the flat file I am reading from is not in any of the standard formats.
The flat file connection manager's connection string property is blanked out the moment I specify an Expression for the connection string. Is this a defect or is it expected behavior.
I am using VWD2005 and SQLExpress 2005. In web.config I define the connection:<connectionStrings> <add name="ProFeeRevenueUser" connectionString="Data Source=.SQLEXPRESS;AttachDBFilename=|DataDirectory|ProFeeRevenue.mdf; Initial Catalog=ProFeeRevenue;User Id=whomever;Password=whatever" providerName="System.Data.SqlClient"/> When I try this code in a class (util.cs), I get an error on trying to open the connection:System.Data.SqlClient.SqlConnection cn = new System.Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings["ProFeeRevenueUser"].ConnectionString); System.Data.SqlClient.SqlCommand cmd = new System.Data.SqlClient.SqlCommand("usp_UserSystemRolesListByUser", cn);System.Data.SqlClient.SqlDataReader dr; try {cmd.CommandType = System.Data.CommandType.StoredProcedure; System.Data.SqlClient.SqlParameter retValParm = cmd.Parameters.Add("@RowCount", System.Data.SqlDbType.Int);retValParm.Direction = System.Data.ParameterDirection.ReturnValue;cmd.Parameters.AddWithValue("@UserLogin", userLogin); cn.Open(); // error occurs here <<---------------------------- dr = cmd.ExecuteReader();if (dr.HasRows) {while (dr.Read() == true) {string MyRole = dr[1].ToString().Trim(); SystemRoles.Add(MyRole); } dr.Close(); } It works fine if I point to a SQL server database on my server, but not with SQLExpress, so I assume I have done something wrong with the connection string or the SQL Express database. Any ideas?
My SqlConnection is causing an error "sqlConn.ServerVersion threw an exception of type System.InvalidOperationException". Everything I have read seems to suggest that there is a problem with my SQLConnection parameters but as you can see from the commeted code below I have tried three different servers with four different configurations. I am out of ideas on what is causing the error. Thanks - Amy Here is a section of my code: String sqlStmt = "Select [UserName], [Password], [Last], [First] from Contacts Where Login=@Uid AND Password=@Pwd"; SqlConnection sqlConn = new SqlConnection("Data Source=localhost;Initial Catalog=test;Integrated Security=SSPI;");//SqlConnection sqlConn = new SqlConnection("Data Source=pe2800;Initial Catalog=test;Integrated Security=SSPI;");//SqlConnection sqlConn = new SqlConnection("Data Source=HorizonDC02;Initial Catalog=test;Integrated Security=SSPI;");//SqlConnection sqlConn = new SqlConnection("Data Source=HorizonDC02;Initial Catalog=test;User ID=username;Password=password;"); SqlCommand sqlCmd = new SqlCommand(sqlStmt, sqlConn);sqlCmd.Parameters.Add("@Uid", SqlDbType.VarChar, 30).Value = uid;sqlCmd.Parameters.Add("@Pwd", SqlDbType.VarChar, 30).Value = pwd;sqlCmd.Connection.Open();
I have written a CLR Function in C#. The function works as expected except that I am trying to read data some data during the function call and get the following error:
Msg 6522, Level 16, State 1, Line 1
A .NET Framework error occurred during execution of user-defined routine or aggregate "fn_SLARemaining":
System.InvalidOperationException: ExecuteReader: Connection property has not been initialized.
System.InvalidOperationException:
at System.Data.SqlClient.SqlCommand.ValidateCommand(String method, Boolean async)
I am getting this exception sporadically in a certain block of code (it usually works): "System.InvalidOperationException: Invalid attempt to MetaData when reader is closed"The code is below:
I am run the ETL package through the SQL Server Agent, the job fails with the error message
"System.InvalidOperationException: The 'IBMDA400.DataSource.1' provider is not registered on the local machine.".
But when i run trough the UI is runs fine.
I am uisng OLE DB driver to the connect to AS400.
can you please tekk ne where a im going wrong.
The log file entery is as follows
OnProgress,DCMS2100,RBGDC01SMTSQL_service,LMS_ORDER_HEADER REFRESH,{78FE47C8-9539-4A20-8FC7-BC790204C2F0},{AF7E99E5-653C-4BF5-B5A1-B1E7CE2AEE9E},31/07/2006 19:57:30,31/07/2006 19:57:30,0,0x,Validating OnProgress,DCMS2100,RBGDC01SMTSQL_service,LMS_ORDER_HEADER REFRESH,{78FE47C8-9539-4A20-8FC7-BC790204C2F0},{AF7E99E5-653C-4BF5-B5A1-B1E7CE2AEE9E},31/07/2006 19:57:30,31/07/2006 19:57:30,50,0x,Validating OnError,DCMS2100,RBGDC01SMTSQL_service,LMS_ORDER_HEADER REFRESH,{78FE47C8-9539-4A20-8FC7-BC790204C2F0},{AF7E99E5-653C-4BF5-B5A1-B1E7CE2AEE9E},31/07/2006 19:57:31,31/07/2006 19:57:31,-1073450910,0x,System.InvalidOperationException: The 'IBMDA400.DataSource.1' provider is not registered on the local machine. at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper) at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.OleDb.OleDbConnection.Open() at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction) at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction) OnError,DCMS2100,RBGDC01SMTSQL_service,LMS_ORDER_HEADER REFRESH,{78FE47C8-9539-4A20-8FC7-BC790204C2F0},{AF7E99E5-653C-4BF5-B5A1-B1E7CE2AEE9E},31/07/2006 19:57:31,31/07/2006 19:57:31,-1073450985,0x,component "DataReader Source" (1) failed validation and returned error code 0x80131509.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.PermissionSet.Demand() at System.Data.Common.DbConnectionOptions.DemandPermission() at System.Data.SqlClient.SqlConnection.PermissionDemand() at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was: Demand The type of the first permission that failed was: System.Data.SqlClient.SqlClientPermission The Zone of the assembly that failed was: Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String) Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String) Line 57: Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.] ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56 ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45 System.Web.UI.Control.OnLoad(EventArgs e) +80 System.Web.UI.Control.LoadRecursive() +49 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
Hello,I work for an attorney staff, so basically the whole day they aresending themselves a lot and a lot of papers (Word docs or Excellsheets).We are going to propose them the use of a Document Exchange andDatabase System (like Lotus Notes or Oracle Managment Content,formerly known as Internet File System IFS ) with .NET interfazes.Basically the idea is that instead of sending papers the whole day,they can use a software to check and manage more quickly theirdocuments.We are looking for a system that allows us to manage:- Security- Versioning- Folders- Check-in/Check-out- Workflow- Search and Retrieval- Extensible MetadataMy question is:1) Is there any Microsoft tool who can help us to achieve that(management of codes, dates, text, names of documents- I mean like aDocument Exchange and Database System) with .NET interface?2) Or do we have to built it from scratch?Thank you very much!Jorge
Reporting services is configured to use a custom security extension in the following Environment.
Windows xp
IIS 5.0
when i go to http://servername/reports , the UIlogon.aspx page loads fine and i enter username and password. but i get logon failed.
when i go to http://servername/reportserver , the logon.aspx does not load and i get the following error message :
"Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning) Messages * SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Hi,I have a few things on my databases which seem to be neither true systemobjects or user objects - notably a table called 'dtproperties' (createdby Enterprise manager as I understand, relating to relationship graphingor something) and some stored procs begining with "dt_" (some kind ofsource control stuff, possible visual studio related). These show up whenI use"exec sp_help 'databaseName'"but not in Ent. Mgr. or in Query Analyzer's object browser, and also notin a third party tool I use called AdeptSQL. I am wondering how thosetools know to differentiate between these types of quasi-system objects,and my real user data. (This is for the purpose of a customized schemagenerator I am writing). I'd prefer to determine this info with systemstored procs (ie sp_help, sp_helptex, sp_...etc) but will dip into thesystem tables if needed.Thanks,Dave
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this. At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component ' This is your new script component in Microsoft Visual Basic .NET ' ScriptMain is the entrypoint class for script components
Imports System Imports System.Data.SqlClient Imports System.Math Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain Inherits UserComponent
Dim nDTS As IDTSConnectionManager90 Dim sqlConnecta As SqlConnection Dim sqlComm As SqlCommand Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then valorColumna10 = -1 * CDbl(Row.Column10 / 100) Else valorColumna10 = CDbl(Row.Column10 / 100) End If
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'. ****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is? And tell me a way to get the tableadapter working?
conn.Open(); . Everything works fine when I run it from my computer. When I try to run it from a network share I get the following error,
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I am using Visual Studio 2005 and .Net framwork v2.0.50727.
I have a report that uses some embedded custom code. The embedded custom code is a function that execute some sql query on a sql server database.Everything works fine in Visual studio. The report gets deployed on the server successfully, however when running the report from report manager i get the following error message :
The Hidden expression for the table €˜table1€™ contains an error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Public function get_field() as string Dim myConnection As System.Data.SqlClient.SqlConnection Dim myCommand As System.Data.SqlClient.SqlCommand Dim data_reader As System.Data.SqlClient.SqlDataReader Dim field(100) as string Dim i as integer Dim j as integer Dim sql_field as string Dim nbr_field as integer Dim rtn_string as string
i = 0 sql_field ="Select field from mytable" myConnection = New System.Data.SqlClient.SqlConnection("Datasource=xxx.xxx.xxx.xxmydatabase;Initial Catalog=mydatabase;User Id=user1;Password=password1;") myConnection.Open() myCommand = New System.Data.SqlClient.SqlCommand(sql_field, myConnection) data_reader = myCommand.ExecuteReader() While data_reader.Read() if data_reader.HasRows then field(i)= data_reader(0).ToString() end if nbr_field = nbr_field + 1 i= i+1 End While data_reader.Close() myConnection.Close()
for j = 0 to nbr_field -1 rtn_string = rtn_string + field(j) + "," Next j
rtn_string = left(rtn_string,rtn_string.length-1) return rtn_string 'return sql_cmd 'return yes_no 'return lkupfield end function
Hi, Im Designed a Webpage .It consosts of a Button, whenever i click on Button report must generated.When the report is in my system report generated successfully.when I try to access a report from other system.I cudnot able to access report.Can any1 hlp me inthis aspect .any procedure in order to access the report of other system.wht shud be url for Reportserverurl and reportpath.In short
When i click on btn i shud get report of other system.what previleges shud be given for other system in other to access
Hi, I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer. plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll" Thanks !SqlConnection conn = new SqlConnection(DbConnectionString); conn.Open(); SqlCommand cmd = conn.CreateCommand(); cmd.CommandText = "dbo.rqryTradesPRR"; cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ; SqlDataReader reader = cmd.ExecuteReader(); while(reader.Read()) { // have written something here
I'm getting this error on a vb.net page the needs to execute two separate stored procedures. The first one, is the main insert, and returns the identity value for the ClientID. The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure. What am I doing wrong with including the identity value "ClientID" in the second stored procedure? Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:
Line 14: If li.Selected Then Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID") Line 17: Line 18: Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb Line: 16 Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert?
Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub
Hi, I have developed a custom server control for .NET Framework 2.0. The server control has a property named BinaryData of type byte[]. I marked this property to be data bindable. Now, I have varbinary(Max) type of field in my SQL Database and I have used SQLDataSource and bound this varbinary(Max) field with the property BinaryData (byte[]) of my control. It is working fine as long as the data value is not NULL. Now, In my control, I have handled the NULL value so that no Exception is thrown. Still, when I bind this property using the SQLDataSource, I get Error "Unable to cast object of type 'System.DBNull' to type 'System.Byte[]'." I am not sure if I can do anything to stop this erro within my control. If it is not possible from the control, then what is the workaround that I can do in my ASPX page in order to stop this error ? Thanks a lot in advance.
Hi, I got this field (dateSubmitted) having a data type of DateTime but I receive this error "Unable to cast object of type 'System.DateTime' to type 'System.String'." All value for dateSubmitted field are 12/27/2007 12:00:00 AM. cheers,imperialx
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
I have this procedure that does a lot of temp table selecting, some insert into tables, and it the end it gives out a table as a result. The thing is, when i run it through query anayzer, it all goes smoothly. When I run it through code (c#), i get a "System Error" message. Does anyone know why this is so? (p.s. nocount is off)
MS documentation is short when it comes to explanation of Quiescing a system for peer to peer replication. It seems that for any change the whole p2p machine has to stop ? This would cripple our development/releases... Is it really the case ? Can all p2p nodes be quiesced except one, the one when I would also make changes ? i.e. N1 <> N2 <> N3 I would stop inserts/updates/deletes for N1 & N3 and keep inserting/updating/deleting for N2 as I'm making schema change on N2 (additional table, additional field etc). Would it work ? Also, would I need to stop selects for N1 & N2 ?