I want to use System Monitor to moniter the performance of SQL Server.
My SQL DBA book tells me how to add counters to system monitor.
But the book shows a Performance Object called SQLServer:Databases.
This isn't appearing in the list of Performance Objects on my computer.
How do I get the SQLServer objects to show in the Add Counters dialog?
How do I access performance monitor (system monitor).I am using Windows 2000 professional, SQL server 2000. Do I need to set up analysis service or something? I am not seeing system monitor on my box? am I missing something?
View 5 Replies View RelatedIn SQL Server 2005 it is possible to correlate System Monitor Data with SQL Server Profiler Traces. But how does it works?
I do the following:
- I start a trace for lets say 10 minutes
- In the trace I include the StartTime and EndTime columns
- I stop the trace
Normally I should open 'FileImport Performance data' but this is grayed out. What am I doing wrong?
I also tried to run a Counter Log together with my trace but this also didn't work for me.
Thanks.
If I'm on a remote machine, meaning a computer not in the WSFC cluster, and I open SSMS 2014, point it to a SQL Instance, and open activity monitor:
1. I get all the panes and charts except % Processor Time.
2. Then, if I authenticate to the cluster's domain by mapping a drive with valid domain credentials, I'm free to put performance counters in the Perfmon - - - but SQL Activity Monitor shuts down with“The Activity Monitor is unable to execute queries against server SQL-V01INSTANCE1..Activity monitor for this instance will be placed into a paused state.Use the context menu in the overview pane to resume the activity monitor.
Additional information: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))(Mscorlib)”
3. Of course, the Activity monitor can't be resumed via the context menu. Removing counters and closing the perfmon do not work. I dropped the mapped drive and rebooted the machine. That brought back 95% of the information in the Activity monitor.
4. Further experimentation showed that any mapping of drive shares present on the SQL Server to the computer running SSMS cut off functionality of the 'overview' pane in the remote machine's SQL Activity monitor -- the monitor that had been trying to watch the server offering the shares.
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
I have setup transactional replication everything on one box. later(two or three weeks later), Replication monitor is show red X Under my publishers (publications is disconnected). this is SQL2005.
Everyone known how to fix this problem?
Thanks,
Frank
Hello,
I do all my monitoring locally for disk space, locks, blocking, I've 10 production servers, We need to centralised the monitoring server so from one server all the monitors can be done. Does anyone has any ideas how memory, cpus consumption, disk space, all alerts, locks, blocking, log space and job completition monitoring can be handled.
Any idea or guidance is appreciated
Thanks
Roma
Hi,
How do most of you monitor your SQL servers (i.e. performance, cpu utilization, job failures...)? Can you recommend any tools that are not too costly?
Thanks.
Mary
Hi all,
I'm very new with SQL Server. My company just purchased a dedicated server and we installed SQL Server 2005 Express Edition. The operating system is Windows Server 2003.
We have only 8 databases in that machine and there is this 1 particular database that keeps getting error. I know that the database is in error if I go to the Management Studio Express and I expand the database, that particular database has no [+] expand symbol and if I try to view the properties it will say "out of memory error" or something like that.
How can I find out what is causing this error? That database has is 18MB and is not used frequently. The error usually appears once every month.
How to debug this issue?
thanks in advance
We've got a growing database server that is quickly getting more active. I wanted to find out how folks monitor their SQL Server 2005 instances? What tools have worked for you? What guidelines have you followed?
In particular, I want to be able to establish which database is driving the most activity, and diagnose which calls or statements are causing the most resource usage. On a bigger picture I want to understand how others are approaching monitoring in general with regards to SQL Server 2005.
Thanks!
Colin
I'm getting the following error when launching the database mirroring monitor and attempt to connect to my database.
TITLE: Connect to Server
------------------------------
Cannot connect to dborat01.hs.pitt.edu.
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'xxxxxx'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
I set up the collector, and specify the Run As as my AD account in the Collector Set - Properties - General screen. My AD account is the local admin of the remote server.
However, the collector does not seem to work. Although the collecting set is shown as running, the The blg file stays at 64K. If I open it, there is nothing inside (no counter at the bottom). What did I miss?
Hi SQL lovers!
I'm trying to set up Performance Monitor to watch my SQL Servers. There should be an SQL object in the drop down list in the 'Add To Chart' dialogue box in PerfMon. But not for me! What am i missing here?
I've started the saved Performance Monitor file you get with SQL Server and i can see the 5 already added objects (buffer cache etc..) but when i go to add more, there is no SQL Server object - strange!?
Can anyone help?
Immense thanks,
Kyle Henly.
Allegedly a DBA!
Halcrow Group UK.
We have SQL Server 7.0 running on a NT 4 sp6 server and non of its items track in performance monitor. Under the SQL program tab, when performance monitor is clicked, it comes up and has items for SQL, but they all track as zero. You can "add" other items such as processor items and they track fine. Any ideas???
Thanks in advance!
Ray Peterson
EPA Seattle
206-553-1682
peterson.ray@epa.gov
I am experiencing problems gathering Stats from Performance Monitor on SQL Server. I am running NT4 with SP5 applied, with SQL Server 7.00.699 . My problem is that I can use the "Performance Monitor" under the Microsoft SQL Server 7.0 sub-menu (Start Menu) to monitor the SQL Server Stats on my machine, but I am unable to monitor any of the servers in our enterprise. Performance Monitor does not even list the SQL Server Object. Does anyone have any suggestions please?
View 2 Replies View RelatedOn some of my database servers, there are SQL Server counters in Performance Monitor. On other servers these are not present. How can I turn these on?
I know with the disc counters you need to explicitly enable them:
diskperf -yv
Is there a parallel for SQL Server? I don't remember doing anything to get them working on the servers that have them. All online articles seem to assume that they just exist.
TIA!
Hi Gurus,
I have a database server running on a sql server 7.0. Some external app is accessing this db server, reading and updating some tables. For some reason, some updating actions didn't work. I just want to track those updating actions, and see if there're some logs reporting failure reason. Is there some tool in sql server 7.0 that could help me do that? Thank you.
I've always assumed SQL Server performance monitor counters get automatically installed when SQL Server is installed. I recently installed SQL Server on a remote server and noticed the SQL Server performance monitor counters do not appear in Perfmon. Aren't these counters automatically installed during setup?
Dave
I'm hoping that someone has experienced this problem before and knows how to get round it.
The problem we are having is that we have a job that is scheduled to run at 4:00 am each morning, for the past 6 weeks it has done this with no problem. However, this morning it failed. we know it failed because it didn't produce the results it was supposed to. However the monitor said that the job had completed successfully. On examining the history of the job we found that the job was still running!!! When we tried to stop the job by right clicking and selecting the appropriate action. The action available to us was to start the job.
After arguing for a bit we decided to try and run the job again. We did this and found that the job running in the history screen terminated with an error and than ran and completed successfully.
Confused? So are we any ideas or solutions gratefully received
I have 4 sql 2000 servers. One is a the primary, one is a local stand-by, one a remote standby and one is a training server. WHen configuring which server should monitor log shipping I was torn between the local standby and the training. The training server which only has a few users if ever, might be used for some DTS tasks in the future for some B to B stuff. Based upon this I am leaning on the local standby to monitor. Anyone have an experience or input?
Thanks!
(No I can't buy any more servers)
Hi
I have a curious problem. I have a development environment SQL Server 6.5 sp 5a and a production environment sp 4
When I view the performance monitor in the development environment I can see the SQL Server object counter but on the production environment I can see all object except sql server objects.
What could the problem be ? Add chart on the production server shows me all ojects other that SQL Server and the same is not true for development !
Hi,
I logged some of the parameters of my SQL server using the Performance monitor into a log file - smn5.log & the log settings in smn5.pml. I started the log and the log file (smn5.log) started growing in size indicating that it was collecting data.
I then went to Options button and said Save. After this in the File menu, I selected Export Log and saved it in a .CSV file, expecting it to contain the Logged data. However, it contains only the Log settings as shown below :
--------------------------------
Reported on L&T1362
Log File C:MSSQLLOGsmn5
Interval: 15.000 seconds
Object,Computer
SQLServer-Log,ERMINTRUDE
SQLServer-Procedure Cache,ERMINTRUDE
SQLServer-Locks,ERMINTRUDE
SQLServer,ERMINTRUDE
SQLServer-Log,FLORENCE
SQLServer-Procedure Cache,FLORENCE
SQLServer-Locks,FLORENCE
SQLServer,FLORENCE
---------------------------------
Could some one please tell me how to gather and view the logged information ? smn5.log contains 10MB of data - the perf. monitor shows that.
Thanks
Satish
I need to monitor my database growth, as few of databases are growing rapidly. My client wants the growth list of my databases. have report of database growth of specific databases, at least of one month.
View 3 Replies View RelatedI know i could use Process explorer to find processes which are accessing a drive or a folder, i need exact same thing to be recorded/monitored. Basically i need list of all processes accessing a drive/folder.
View 0 Replies View RelatedHello experts. I inherited two SQL2000 SP4 servers. ServerA is configured with a Linked Server (ServerB). The problem is that liked_user which is the login configured "For a login not identified in the list above, connections will be made using this security context" is a sysadmin on ServerB. This means that any login from ServerA can do havoc on all databases in ServerB! There are many DBs and logins on both servers and no one can tell us which login is supposed to connect to the other server on which DB with what permission. Now, we want to trace which logins in ServerA use this Link so we can reconfigure this nasty setting.
I started the following SQL Profilers: On ServerA --> Filter TextData Like %ServerB%. On ServerB --> Filter LoginName Like liked_user AND HostName Like ServerA
Interesting enough, several entries were logged on the profiler i ran in ServerB which means that liked_user logged into ServerB from ServerA. Since liked_user is only used by the Link, i can safely conclude that the link was used by some login in ServerA. BUT, nothing was logged in the profiler i ran on ServerA!
Can anyone help me sort this one out? Thanks in advance,
I have set up log shipping between two servers with a third serving as a monitoring server. Recently the monitoring for the eight databases that I am log shipping began to indicate that everything was failing. Upon further inventigation of the log_shipping_monitor_history_detail tables on the prinary and secondary everthing appears to working properly but I have been unable to resyncronize the monitoring. I have attempted to use the stored procedure sp_refresh_log_shipping_monitor to no avail, it does not appear to do anything with respect to the data in the dbo.log_shipping_primary_databases and log_shipping_monitor_primary tables on the primary server or the log_shipping_monitor_secondary and dbo.log_shipping_secondary_databases tables on the secondary. I have also manually updated the records in these tables in an attempt to syncronize but after the next sucessful backup, copy and restore this monitoring data is not updating. Does anyone have any ideas as to what I am doing wrong or how I might rectify this situation.
View 3 Replies View RelatedI Want to monitor Replication count of object (Table )if it is not equal to Publication (Table ) and subscriber (Table ), It have to send mail with count difference.
View 9 Replies View RelatedI need to check connectivity to AG listener remotely and log that to a table/file. What is the best way to do that? Powershell?
View 4 Replies View Related
im trying to measure the amount of CPU used in a backup and restore, using the SQL Server Databases: Backup Restore counter in Perfmon.
I can select The counter, but it does not let me select an instance database to monitor.
see image:
I have 3 instances on my machine, 2 sql 2005 and 1 sql 2008. why do these instances not appear? i dont know how to set up this monitoring.
if i type LOCALHOST or 127.0.0.1 in the "Select counters from computer" text box i can see all databases under my sql 2005 instances, but not the ones under the 2008 instances. I have disabled all sql server 2005 services and can confirm none of the sql 2008 instance databases are showing up.
this is a huge problem, especially for when i start stress testing sql server 2008 in preperation for upgrading.
anyone any ideas on why i cannot see sql server 2008 instances in perfmon? I have tried from a remote pc also with the same results.
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
Is there a way to permanently change the order of the columns in Job Activity Monitor?
I'd like to move Duration to the right of Step Name, but this only lasts so long as I have JAM open. Once I close it and re-open, JAM goes back to its default column order. Google gives me nothing but the temporary "drag and drop" method that I already know about.
I have to make server trigger to monitor the actitites if sysadmin members. i need to get the login name,hostname and query which they are running.
View 3 Replies View RelatedAny TSQL script to monitor replication(Transactional, Snapshot) with current status ? I have tried below script but it giving error.
"Msg 8164, Level 16, State 1, Procedure sp_MSload_tmp_replication_status, Line 80
An INSERT EXEC statement cannot be nested."
DECLARE @srvname VARCHAR(100)
DECLARE @pub_db VARCHAR(100)