hello all,
I am having a hard time referenceing system variables. Can some one give me a quick lesson?
I am trying to save system variables suck as StartTime finishtime and processes ran?
I want to store these items into a table for use later.
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
I have a SSIS package that was migrated from DTS 2000. It had a variable that I passed to the DTS package when executing. Now when I try executing the SSIS package with the variable, I get the following error: The package path referenced an object that cannot be found: "package.variables[user::SnapShotDate].value". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
From everything that I can find, I am passing the variable correctly. If I look at the package within BIDS, my variable is listed under the variable window & it is scoped for the package. Any ideas on what I might be missing here? This is my first SSIS package that contains a variable.
Let me know if you need more info.
Thanks!
John
I have defined an active X task (converting from SQL 2000)
Function Main()
DTSGLOBALVARIABLES("TEST").Value= InputBox("TEST : ","Message Box")
Main = DTSTaskExecResult_Success
End Function
The problem is that this variable is not recognized by the subsequent tasks although I have defined a variable "TEST" in the variable lists.
Is there something else to do to get it recognized ?
Thanks for helping,
Pierre
Hi
Does anybody know how to pass values from asp dot net to SSIS package variables ?
Currently I have an SSIS package for monitoring windows service... for that...
I have to pass the Server-IP Addrress, UserName, Password, Service Name as Parameter.
I would like to pass these parameters through an Interface from RUN TIME.
Please help this problem
Regards
Deepu M.I
I have created two User variables at Package level (OldRunID{Int32} and NewRunID{Int32}). I am using two simple ExecuteSQL Tasks to get a Single Row Resultset return (each) and loading them (on Result Set Page). Using the Constraint and Expression Flow controls, I have found that they load to True (-1) instead of the 25 and 50, respectively, that I would expect. I then wrote a Script task to evaluate their values and find that I get zero for Dts.Variables.Count. - Why am I not loading the variables correctly and why can I not access them in the Script task?
View 18 Replies View Related
I have been looking at the project Real reference implementation for doing auditing of data uploads. The tables and store procedures are in place using identical field and variable names. However, when running the package it does not update the relevant log entry with the end time and status.
I have performed the process manually running the stored procedures, providing the values directly and everything works fine.
I can only assume that the LogID variable is not being updated during the run and therefore the onEnd procedure cannot update the relevant log entry.
One side effect is that it does update the record when it€™s the first record entered into the table but not on any other inserts. Clearing the table each time is not an option.
This has become rather frustrating and would appreciate any assistance.
Thanks.
I've got an SSIS package that works fine. It does extracts from a foreign ODBC source and moves it to SQL Server. It has 3 variables, a customer ID, a fromDate and a toDate. Those variables are used to complete a SQL statement expression. So far so good.
I now want to provide a web interface in a web page that will enable the user to provide values for those variables. How can I execute my package passing the user's input?
Thanks for any advice.
Lou
Hi All,
I would appreciate if someone can help me with the following:
I have package that I designed on 32 bit system. It was copied over to 64 bit server's directory (Production).
I am trying to execute that package using DtExec utility. My package has some parameters that I am trying to set on the command prompt using /SET option. Everything runs fine on 32 bit system (that is my dev box) but I get the following on 64 bit system (Production):
Command that I am trying to run is:
dtutil.exe /FILE "e:external_dataSSISXXX.dtsx"
/SET "Package.Variables[User::ASServer].Properties[Value]";"CP_Promotion"
I get the following errors:
Microsoft (R) SQL Server SSIS Package Utilities
Version 9.00.1399.06 for 64-bit
Copyright (C) Microsoft Corp 1984-2004. All rights reserved.
Option "/SET" is not valid.
On 64 bit system, I don't have 32 bit version of DTExec installed. According to Books On Line the syntax to use DTExec on both 32 bit and 64 bit system are the same. Can /SET not be used in 64 bit system.
Thanks in advance for your help.
Hi all,
Is it possible to execute a SSIS package in a system which doesn't have SQL server installed on it ?
Note : The rights to use xmdshell is not given on the SQL server where the package resides.
Any help would be appreciated.
Thanks,
DB Analyst
Hi,
I have an SSIS package that has an "execute process task" that executes a batch file. The package has been deployed to the msdb database, and is called from a stored procedure using xp_cmdshell dtexec ...
I can execute the package just fine if I'm logged onto the server as a system administrator, by running the stored procedure from a query window.
However, if I log on to the server as a non-admin user, the package attempts to run, but breaks at the file system task, with "Access Denied". It can't run the batch file. It seems to be a permissions issue at the file system level.
How do I resolve this?? Please help.
Thanks
I've got a package in SSIS 2012 that has an Execute SQL task in the control flow level.
The SQL in question does an Upsert via the SQL merge statement. What I want to do, is return the count of records inserted and records updated (No deletes going on here to worry about). I'm using the output option to output the changed recs to a table variable.
I've tried returning the values as:
Select Count(*) as UpdateCount from @mergeOutput where Action = 'Update'
and
Select Count(*) as InsertCount from @mergeOutput where Action = 'Insert'
I've tried setting the resultset to both Single rowset and Full rowset, but i'm not seeing anything returned to the package variables I've set for them (intInsertcount and intUpdatecount).
Can I assign values to variables in 2012 using below command? I have used the same command in 2008 and it works fine.
DTEXEC
/SERVER"XXXXXXXXSQLSERVER2012"/SQL"Mypackage.dtsx"/SETPackage.Variables[FilePath].Value;"C:Test estvariable.csv"
Wondering is there a different way in 2012 to pass values to variables dynamically.
I have a ssis package stored in file system and I need to modify this package.
View 7 Replies View Related
Hi
I have to import a list of users and then add them to my Sql database via .NET framework APIs
Now the following code works from within my web application but I cannot get it to run in an ssis transormation script.
Has anyone got experience with this requirement in an SSIS package script?
Code Block
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Static users As New System.Collections.Hashtable
Dim password As String = String.Empty
If (Not users.ContainsKey(GetUserCode(Row.UserID))) Then
users.Add(GetUserCode(Row.UserID), GetUserName(Row.FullName))
'create a random password
password = System.Web.Security.Membership.GeneratePassword(7, 1)
Try
'insert new user
System.Web.Security.Membership.DeleteUser(GetUserCode(Row.UserID))
System.Web.Security.Membership.CreateUser(GetUserCode(Row.UserID), password)
'link roles to new user
System.Web.Security.Roles.AddUserToRole(GetUserCode(Row.UserID), "MANAGE_SCORECARD")
Catch ex As Exception
System.Windows.Forms.MessageBox.Show(ex.Message)
End Try
End If
End Sub
I have created a Test SSIS Package within BIDS (VS 2K8, v 9.0.30729.4462 QFE; .NET v 3.5 SP1) that connects to our Test Listener.
There is only 1 Connection Manager Object, and OLE DB Provider for SQL Server.
The ConnectionString lists: Provider=SQLOLEDB.1;Integrated Security=SSPI
The Test Connection within BIDS works.
The Package Control Flow has just 1 Object, and Execute SQL Task that performs an Exec on an SP that contains only a Select (Read).
The Package runs within BIDS.
I've placed this Package within a Job on the Primary Node. Ive run the job successfully using 32 bit runtime on and off. The location of the file on the server happens to be on a share that resides on what is currently the Secondary Node.
When I try to run the exact copy of this Job on the Secondary Node (Which has been Set up for Read All Connections; Yes), I get an error, regardless of the 32 bit runtime opiton. At this point, the location of the file is on the Secondary Node.
The Error is: "Login failed for user 'OurDomainAgent_Account'".
The Agent is a member of NT ServiceSQLServerAgent on both instances, and that account is a member of SysAdmin. Adding the Agent account as well, and giving that account SysAdmin, makes no difference either.
Why can't I get this to work?
Hi,
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
João
Hi,
I would like to design a SSIS package, which have couple of variables. It loads a xls file specified in a variable [varExcelFileFullPath] .
I will run it by commands: exec xp_cmdshell 'dtexec /SQL ....' (pls see an example below).
It seems it does not get the values passed in for those variables. I deployed the package to a sql server.
are there any grammar errors here? I copied it from dtexecui. It worked inside Dtexecui not in dos command.
exec xp_cmdshell 'dtexec /SQL "LoadExcelDB" /SERVER test /USER *** /PASSWORD ****
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
/LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";"Test.SuperBowl"
/Set Package.Variables[User::varExcelFileName].Properties[Value];"TestAdHocLayer"
/Set Package.Variables[User::varExcelWorkbookName].Value;"Sheet1$"
/Set Package.Variables[User::varExcelFileFullPath].Value;"D: estshareTestAdHocLayer.xls"
/Set Package.Variables[User::varDestinationTableName].Value;"FeaturesTmp"
/Set Package.Variables[User::varPreSQLAction].Value;"delete from FeaturesTmp"
'
thanks,
Guangming
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies View RelatedHi,
I want to store the System::StartTime in my Integration Table Log. Please guide how can I use this in my Execute SQL Task Block. I write this SQL Statement:
INSERT INTO CMN_tblIntegration VALUES ('HRM_tblParty', ?) Which the ? is for the parameter. I go to parameter mapping tab and map the System::SatrTime to parameter0, but the package fails to run. I also changed the ? to @IntDate and also changed the parameter name but the error was the same.
Please help how to write this System Variable value in to that table.
Regards,
Samy
Hello All,
I have a Master Package which calls a group of other packages out on the SSIS Package Store using parent / child and a number of variables. These seem to work when passing various audit information (audit key, record counts, etc) but when I try to pass a variable for the connection string and assign it via an expression to the connection manager, I get the Master Package writing to the correct database and the children package writing to their "default" database which is supplied as the default value in the variables which should be populated by the parent task.
i.e., I end up with my master package audit information in database a and child package audit and transactions in database b, even though the packages associated with these transactions are supposed to be reading the connection string from a parent variable. Any clues or suggestions?
Edit: It is still passing along the correct parent audit information and record counts, it's just not connecting to the correct database by the variables holding the connect string
Thanks for your time.
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
[Microsoft follow-up]
In the Raw File Source component when I set AccessMode='File name from variable' and select the drop down for 'FileNameVariable' property the first thing I see is all the system variables. What's the point in displaying those? They are completely useless in this context. Would it really have been that hard to remove them?
Can this be changed please?
-Jamie
How do I pass system variables to a stored procedure? Is it possible to have an OLE DB transformation with the following sql command: exec InsertIntoLog @MachineName, @TaskName...? Do I have to use a Derived Transformation first to 'convert' variables into columns and then use exec InsertIntoLog ?, ? ...
Thanks for the help.
KB Article 906547 suggest that it's possible to have system variables in the Subject & Body of a Send Email Task. Such as this:
"Package>>> " + @[System::PackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System::StartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName]
Or this in an OnError event handler:
"Error in the task: " + @[System::SourceName] + "with the ID: " + @[System::SourceID] + " has failed at: " + (DT_WSTR, 20) @[System::ContainerStartTime] + "."
But when I do this I just get this exact text, no variables.
I'm obviously missing something basic but I can't find it. Can anyone offer a suggestion please?
I want to loop through a recordset of email addresses, and for each value in the recordset, I want to perform a set of task which includes creating an Excel spreadsheet and emailing it through to those email addresses.
I have 2 DTS package.
Package 1 - This contains an ActiveXScript task. The purpose of this package is to do the looping through of the recordset, and passing the email address variable to package 2.
Package 2 - Receives the email address from package 1. Package 2 contains the creating Excel spreadsheet and emailing it through to the recipients function.
I am having difficulty passing the variable from package 1 to package 2.
The code I have to date for the ActiveXScript task in package 1 is:
'************************************************* *********************
' Visual Basic ActiveX Script
'************************************************* ***********************
Function Main()
Dim oPackage
Dim oStep
Dim oTask
Dim oCustTask
Dim oGlobal
'Initialise package
Set oPackage = CreateObject("DTS.Package2")
Set oStep = oPackage.Steps.New
oStep.Name = "TestStep"
Set oTask = oPackage.Tasks.New ("DTSExecutePackageTask")
Set oCustTask = oTask.CustomTask
oCustTask.Name = "TestCustTask"
oStep.TaskName = oCustTask.Name
oPackage.Steps.Add oStep
oCustTask.FileName = "C:TempVeraTest1.dts"
oPackage.Tasks.Add oTask
set oGlobal = oPackage.GlobalVariables.New("CurrentAirlineCode")
oGlobal.value = "SIA"
oPackage.GlobalVariables.Add oGlobal
'Execute package
oPackage.Execute
Main = DTSTaskExecResult_Success
End Function
This does not work. Can anyone please help?
Thanks very much in advance.
I know there is a global variable feature in DTS that allows you to pass data or object references between several different Activex scripts in a single package.
What I'm looking for is a method of using a Transact-SQL variable (like @whatever) that I could use across several "Execute SQL" tasks within the same DTS package.
Does anyone know if this functionality exists (directly or indirectly)?
Thanks,
Joe T.
Couldn't quite find the answer I was looking for via a forum search.
I have 9 packages that are currently called by a master package - all child packages take a datetime variable from the master package which is subsequently used in the child processes.
The question I have is that if I run the master package manually from Visual Studio I can set the master package variable manually to a date of my choosing and run it, which works fine. However we will be wishing to automate the package execution at some point and want to know the best way to run the package(s) on an automated basis and have the data variable supplied to the master package.
What would be the best way to do this ?
Presently we have a variable called MasterPackage_vLoaddate which is a DateTime data type.
Any help appreciated.
How to get the value of the variables when i debugging a package?
Thanks!
HI, we have something like 120 packages that need to be "upgraded" to a newer version of a template. Basically, we need to add a bunch of variables of various types (12-15 variables). Is there a way to open the package in a script task and add those variables programmatically? Or is there another way to do it (e.g. modify the dtsx file)?
Thank you,
Ccote
I was able to write successfully a Script Task to set the values of several package variables. But when the execution completes, the variables still contain values which were specified by default.
What I want is a method of persisting the values assigned to a variable through a script. I believe this was possible in DTS
I have 10 or so packages with package scope variables. I would like to create a package that not only runs all the packages but also sets the variables within the packages being executed.
A) Whats the best way to run all the packages from one (package??)?
B) Whats the best way to set the variables in the child packages, without having to change them manually everytime I run it.
Thanks,
Mardo
Hi,
I am running my package in this way:
exec xp_cmdshell 'dtexec /SQL "SBLoadExcelDBLog" /SERVER test /USER **** /PASSWORD ***** /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
/LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";"Test.SuperBowl"
/Set Package.Variables[User::varExcelFileName].Properties[Value];"aaab"
/Set Package.Variables[User::varExcelWorkbookName].Value;"Sheet1$"
/Set Package.Variables[User::varExcelFileFullPath].Value;"D: estshareaaab.xls"
/Set Package.Variables[User::varDestinationTableName].Value;"FeaturesTmp"
/Set Package.Variables[User::varPreSQLAction].Value;"delete from FeaturesTmp" '
I got errors:
Started: 3:49:51 PM
Progress: 2006-01-30 15:49:52.34
Source: Extract AdHoc Data from Excel
Validating: 0% complete
End Progress
Error: 2006-01-30 15:49:52.46
Code: 0xC0202009
Source: Extract AdHoc Data from Excel Excel Source [649]
Description: An OLE DB error has occurred. Error code: 0x80040E37.
End Error
Error: 2006-01-30 15:49:52.46
Code: 0xC02020E8
Source: Extract AdHoc Data from Excel Excel Source [649]
Description: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
End Error
Error: 2006-01-30 15:49:52.51
Code: 0xC004706B
Source: Extract AdHoc Data from Excel DTS.Pipeline
Description: "component "Excel Source" (649)" failed validation and returned validation status "VS_ISBROKEN".
End Error
Progress: 2006-01-30 15:49:52.51
Source: Extract AdHoc Data from Excel
Validating: 25% complete
End Progress
Error: 2006-01-30 15:49:52.51
Code: 0xC004700C
Source: Extract AdHoc Data from Excel DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2006-01-30 15:49:52.51
Code: 0xC0024107
Source: Extract AdHoc Data from Excel
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:49:51 PM
Finished: 3:49:52 PM
Elapsed: 0.703 seconds