T-SQL Debugger Doesn't Allow Stepping Through Stored Procedures No Other Procedure With The Same Name
May 10, 2006
T-SQL Debugger Doesn't Allow Stepping Through Stored Procedures
And there is no other procedure with the same name owned by dbo or any
other users.
There is no error messages also, it just completes procedure and
returns result
server:
Microsoft SQL Server 2000 - 8.00.818 (Intel X86)
Microsoft Corporation Enterprise Edition on Windows NT 5.0 (Build
2195: Service Pack 4) and I don't know how do determine Client's
version.
What should be done (on client site or server site )to fix this
problem.
Thank you
I am trying to write a stored procedure that will execute a SQL statement that returns multiple records. Then I need to be able to step through each record, examining a value in one of the fields (and then perform subsequent actions depending on the value).
My problem is that I don't know how to step through a recordset in T-SQL. There doesnt seem to be a "recordset" type object that I can move through. Or can this be done via a cursor? If so, how?
I am trying to use the Transact-SQL debugger to step through a stored procedure on a server to determine where it is failing. I right-click the stored procedure I want to debug in the Query Analyzer's Object Browser and choose Debug... In the Debug Procedure dialog I fill in the values for the parameters, choose the Auto roll back checkbox, and press Execute.
The T-SQL Debugger screen comes up with my stored procedure and a message on the bottom of Waiting for user input. But I can input nothing, neither click on the icons on top, set breakpoints, or doing anything else, as the stored procedure runs to the end and gives me the return code.
If I subsequently set some breakpoints in my stored procedure and try the Go button. Once again the stored procedure runs to the end without stopping at any breakpoint.
In both cases, the stored procedure shows the waiting icon as it proceeds to the end, so that I can not click on anything to stop it.
I have been told this is may be a permissions issue between myself as a client on my machine and the stored procedure on the server. If so, does anybody know what I the things that have to be done on the permissions side to be able to debug the stored procedure using the Transact SQL debugger.
and when I try to run it in debug in the SQL Query Analyzer, I sent in the parameter via the debug interface as '2004/02/02', and as GETDATE(), and a number of other formats, but cannot even get into the procedure once debugger starts up!
I get the following error once I hit "execute" after putting in the above data in the parameter text box...
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
HELP PLEASE!!! (I'm about to punch my new monitor!!!)
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I'm rather new at reporting services, so bear with me on this one.
I have a stored procedure in MSSQL called prc_failedSLA_per_week, that has two parameters (@startWeek and @endWeek). I've added a dataset in reporting services which runs my procedure. when I run it from the data tab in RS, I get prompted for values on these two parameters, and a table gets generated. But if I try to preview my report, I get the error "Procedure of function "prc_failedSLA_per_week" expects parameter "@startWeek", which was not supplied".
I've tried to find info on this in the help file to no avail, not even google helps me in any way. I guess it's some kind of newbie mistake, but I simply can't figure out what to do.
I'm having some very frustrating 'syncing' problems with my report (currently in dev in visual studio) and what actually exists in the database. To start, I had my report definition open, and realized I needed a new sproc. So I went over to the db and created a new sproc, lets call it "Test1". After making a new dataset in ssrs, I can't seem to get SSRS to realize the stored proc actually exists. I continually get the error:
"The stored procedure 'Test1' doesn't exist. (System.Data)
I've shut down visual studio, re-opened, etc. Same thing. It looks like visual studio has some cached version of sys.procedures that only refreshes when the bloody thing feels like it. Any ideas?? I've been doing this for awhile, and I've minded the connection string, correct sproc syntax, etc. It runs fine on SQL Management studio.
Another, similar problem - When adding in a new column to a sproc, the dataset doesn't seem to pick up on it, no matter how many times the "refresh fields" button is hit.
I was trying to create a simple SP that return a single value as follows:CREATE PROCEDURE IsListingSaved@MemberID INT,@ListingID INTASIF EXISTS (SELECT [Member_ID] FROM [Member_Listing_Link] WHERE [Member_ID] = @MemberID AND [Listing_ID] = @ListingID) Return 1ELSE Return 0GOWhen I try it out in the Tableadapter's preview table, I get the correct result (1, where the entries exist). However, in the BLL, I tried to get the value as:Dim intResult as IntegerintResult = CType(Adapter.IsListingSaved(intMemberID, intListingID), Integer). However, this always returns 0 (when it should be returning 1). P.S. Curiously, breakpoints skipped the VS generated code for the adapter. What could be the problem? Thanks,Wild Thing
I am trying to catch the @retval which is returned finally after executing sp_update_schedule stored procedure (o or 1) but i cannot catch the final resultIf i put Print statement just before the return (@retval), then i am seeing 0 as output but i want to catch that value when i execute the SP with the parameters. How can i do that?? same thing with all other system stored procedures.thanks alot in advance....if you want more info on this Q, plz let me know
SELECT .... FROM temp LEFT OUTER JOIN anothertable ON ...
This stored procedure works fine in Management Studio.
I then use this stored procedure in an ASP.NET page via a SQLDataSource object. The ASP.NET code compiles without error, but the result returned is empty (my bounded GridView object has zero rows). From Web Developer, if I try to Refresh Schema on the SQLDATASource object, I get an error: "Invalid object name '#t1'. The error is at the red #1 as I tried putting something else at that location to confirm it.
What does the error message mean and what have I done wrong?
I Have a nifty little stored procedure that takes data from an ASP form post and inserts the data into two tables. However what I really need this to do before the insert is check whether there is already a record that matches some of the criteria, and if so returns an error "This Username already exists" and only if there isn't a record that matches the criteria is the record inserted.
my current stored procedure looks like this -
Code Snippet@siteid int,@companyname nvarchar(50),@address nvarchar(500),@phone nvarchar(50),@fax nvarchar(50),@email nvarchar(225),@url nvarchar(225),@companytype nvarchar(50),@billingcontact nvarchar(50),@name nvarchar(50),@AccountType nvarchar(50),@PASSWORD nvarchar(50),@AccountLive nvarchar(50),@EmployeeLevel nvarchar(50)ASDeclare @NewID INTINSERT INTO dbo.JBClient(JBCLSiteID, JBCLName, JBCLAddress, JBCLPhone, JBCLFax, JBCLEmail, JBCLCompanyType, JBCLURL, JBCLAccountType, JBCLAccountlive, JBCLBillingContact)VALUES (@siteid, @companyname, @address, @phone, @fax, @email, @companytype, @url, @AccountType, @AccountLive, @billingcontact)SELECT @NewID = SCOPE_IDENTITY()INSERT INTO dbo.JBEmployee(JBEClientID, JBESiteID, JBEName, JBELevel, JBEUsername, JBEPassword, JBEAddress, JBEPhone)VALUES (@NewID, @siteid, @name, @EmployeeLevel, @email, @PASSWORD, @address, @phone) The values that i need to check against are -
@siteid @email
in the table dbo.JBEmployee against columns JBESiteID & JBEUsername
What i would really like to do if a record exists is return the user to an ASP page, which contains all of the variables previously enterred -,
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
We have on demand snapshot replication set up between 2 servers. When the subscriber applies the snapshot, our stored procedures start executing very slowly. Updating statistics and rebuilding indexes does not resolve the problem, however; executing sp_recompile on the affected stored procedures does fix the problem. Is this a known issue with replication? Is there a better workaround than manually recompiling stored procedures after every snapshot?
We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Can anyone tell me besttool for debugging the Stored Procedure user friendly. We are using Powerbuilder/Sql Server 6.5 as back end. we got lots of stored procedures and I am having tough time in debugging. I actually moved from Oracle and don't know much about Sqlserver just started learning.
If anyone tell me best tool,method for doing then I will be very greatful
I am writing a set of store procedures (around 30), most of them require the same basic logic to get an ID, I was thinking to add this logic into an stored procedure.
The question is: Would calling an stored procedure from within an stored procedure affect performance? I mean, would it need to create a separate db connection? am I better off copying and pasting the logic into all the store procedures (in terms of performance)?
I am working on SQL-Server 2000 (developer edition) with SP3 on Win 2000 and Clients are Win98/Win XP.
I am not able to 'Step Into' my SQL Procedure code in Debug mode, executed from Query Analyzer from a client machine. As soon as I select the 'Execute' button after inserting all the parameters value, the whole procedure gets executed. But I'm able to do the same (i.e 'step into') from the Server itself.
Do I need any additional configuration settings in the client machine ??
I shall be greatful if anyone can help me to solve the above problem.
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I have been looking at this for over a day now. I cannot see why this procedure does not work, its so simple. No matter what happens it always returns 0. If it locates a record, it doesnt update it, yet it still returns 0. It should not be returning 0 if its not updating so I can't figure out why it does. Why does this always return 0? [pre]Create Procedure CreateNewCategory @title nvarchar(100), @description nvarchar(1000), @displayOrder intAS DECLARE @Result as int IF EXISTS(SELECT categoryTitle FROM categories WHERE categoryTitle = @title) BEGIN SELECT @Result = 1 ENDELSE BEGIN INSERT INTO categories(categoryTitle, categoryDescription, displayOrder) VALUES(@title, @description, @displayOrder) /* If no error was encountered, 0 will be returned. */ SELECT @Result = @@Error ENDGO[/pre] Thanks!
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out? SELECT TABLE_SCHEMA + '.' + TABLE_NAME FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE = 'BASE TABLE'
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
