I want to add an exception to the WHERE clause below.
Something like:
IF @IDHuis = 'WH' THEN
add the extra condtion:
AND D.AfdelingZPT <> 'A01'
-- HRS VAST
INSERT INTO @T (JAAR, WEEK, HrsVast)
[Code] .....
I want to change Set clause of Update Statement dynamically based on some condition.
Basically i have 2 Update statments having same FROM clause and same JOIN clause.
Only diff is SET clause and 1 Where condition.
So i am trying to combine 2 Update statements into 1 and trying to avoid visit to same table twice.
Update t
Set CASE **WHEN Isnull(td.IsPosted, 0) = 0
THEN t.AODYD = td.ODYD**
*ELSE t.DAODYD = td.ODYD*
END
From #ReportData As t
Join @CIR AS tmp On t.RowId = tmp.Max_RowId
[Code] ....
But CASE statement is not working...
I write a query to get some data as the following. but i need when a user check specified condition a query parameter change to specified condition :
create proc proc_ReservationDetails
(
@status nvarchar(50) = null
)
as
begin
select reservationId, reservationStatus, reservationDesc
[Code] .....
I given my requirement below:
select * from table where (here if account_no = '123456' then name <> 'KING')
Hi ALL,
Well, i have one view:
create view vwdate
as
select custno, custname, city, date
from salestab
where date = ????
well, this question mark...i have to fill..
like i want if month is june then i want for whole may month results of custno, custname and city..
if month is july then i want results for whole june month..
means for previous month results i want whatever the date is for that particular month..
Example:
if date='06/15/08'
then results will be
custno custname city date
---------------------------------
1 AAAA NJ 05/01/08
2 SDS CT 05/04/08
........................ 05/18/08
.......................... 05/30/08
if date='06/30/08' OR '06/1/08' then also results will be same..
so i want for previous month results..
so can anyone help me to get the correct condition in where clause?
Thanks ALL..
tblScore contains score for each problem
id problemID score
------------------------
1 1 10
2 2 30
tblSubmission contains problem submissions for each user
id user problemID accepted
-----------------------------------------------
1 UserA 1 0
2 UserA 1 0
3 UserA 1 1
4 UserA 2 1
5 UserB 1 0
6 UserB 1 1
7 UserB 2 1
For UserA :
- For problemID 1
-> submitted three times
-> rejected for first two submission and accepted on third submission.
- For problemID 2
-> submitted one time
-> accepted on first submission
For UserB :
- For problemID 1
-> submitted two times
-> rejected for first submission and accepted on second submission.
- For problemID 2
-> submitted one time
-> accepted on first submission
Now I would like to process the table and want to get the following result :
user Score
--------------------------
UserA 36 (6 + 30)
UserB 38 (8 + 30)
Explanation :
- For each rejected submission, a -2 point penalty.
- UserA have submitted probelmID 1
- > score of problemID 1 is 10.
- > first two times rejectd
- > third time accepted.
-> score = 10 - 4 = 6
- UserA have submitted problemID 2
- > score of problemID 2 is 30
- > first time accepted. No penalty will be counted
- > score = 30
so final score for UserA = 30 + 6 = 36
Similar for UserB.
I have written a merge Statement where i am facing trouble to delete the data basing on Where Clause Condition.
1) Case 1 : For example i have inserted Data from Source to Target based on Date Key Condition.Take an Instance 10 Records Inserted.
2) Case 2 : For example some changes in the records and it has been updated through the Merge Statement .
3) Case 3 : For the Same Date key based on Conditions now three records has came and need to be inserted and rest should be deleted for that Date Key.
How i need to proceed on this before 10 records are not getting deleted and new records adding for that one
My Example Code :
MERGE INTO TargetTable AS Target
USING (
SELECT DISTINCT Col1,
Col2
FROM Table1 AS cga
)
ON dad.AnchorDate = CASE
[Code] ....
Hello
I wonder if someone could suggest a way to obtain the following. Using SQL Server 2005 I want to create some stored procedures. I want to query the DB with various filter arguments and combinations of these. One way would be to create one stored procedure for each function signature. However, as the number of combinations of filter is large, if possible I'd rather have a generic input to the each stored procedure that corresponds to the entire WHERE clause' search condition.
The stereotype behavior I'm looking for is:
SELECT myField
FROM myTable
WHERE @mySearchCondition
Does any one have some good suggestion, code samples and/or links?
Kind regards
Jens Ivar
Table A - data example
Idno Entity Flag
1 1 y
2 1 n
3 1 y
4 1 y
Table B - data example
Idno Entity
1 1
2 1
3 1
Table C - data example
Idno Entity
4 1
I want to update the value flag in table A.Update flag from n to y if idno A in table B and and idno A not in table C, so from table A above, first record and 3rd record remain unchange but 2nd record, flag will be changed from n to y. 4th record where idno A not in table b and in Table C so flag will change from y to n. is it possible, or do i need to use the "fetch" method to compare record by record.
I need to build a query that can return only documents where the field "u_DIM4" for the same document have more than one different value..my script are this one just to having an example:
Select docnome [documentname], adoc [docnr], count(*) [countAlldifferentbyDoc], u_dim4
from fn
where u_dim4 <> '' and data between '2015-01-01' and '2015-07-31'
AND adoc = '02634'
Group by docnome,adoc,u_dim4
ORDER BY 2 asc
[code]...
I am currently in the process of writing an INSERT/UPDATE trigger in SQL 2012, the scenario is, I have a table called Quote, what I want to happen is when a record gets added to the table with a field called Approved, populated with a value or a record gets Updated and the Approved field gets populated I want the trigger to execute a stored procedure, passing through a value from a field called Account within the Quote table as a variable. I know I can achieve the action using one trigger "AFTER INSERT, UPDATE" but I am struggling on forming the rest of the trigger.
View 1 Replies View RelatedI have a requirement to Insert Column 1 and Column 2 based on below condition only. Looking for a Store procedure or query
Condition : Allow Insert when column 1 and Column 2 have same values on 2nd row insert. But should not allow insert when Column 2 value is different.
ALLOW INSERT:
Column1 Column2
A0007 12-Aug
A0007 12-Aug
A0007 12-Aug
DONOT ALLOW INSERT: (COLUMN1 ID should not allow different dates)
Column1 Column2
A0007 23-Mar
A0007 02-Feb
FINAL OUTPUT Should be
Column1Column2
A000712-Aug
A000712-Aug
A000712-Aug
B000220-Jun
B000220-Jun
C000330-Sep
Discard Insert when Column1 ID's comes with Different dates.
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
I am trying to find a way to provide three metrics for a table that only provides 2 of them. I need to derive a third column which tallies based on conditions that can be found in the dataset.
The table I'm querying shows
(1) total referrals
(2) total moves
but it is missing a column that tallies whenever the referral moved into the same property_id that it was referred to.
create table dimFacts
(date_value datetime
, month_name varchar(9)
, year_number varchar(4)
, month_number tinyint
[Code] ....
How can I use sql to create one additional column for the above data set, ie. let's call it 'property_conversion' such that on the fifth row there will be a '1' showing that on 2012-12-30 lead_id 10038655 moved into the property it was referred to back on 2012-10-15 ?
I have around 3 tables having around 20 to 30gb of data. My table A related to table B by a FK and same way table B related to table C by FK. I would like to delete all rows satisfying certain condition from table A and all corresponding related records from table B and C. I have created a query to delete the grandchild first, followed by child table and finally parent. I have used inner join in my delete query. As you all know, inner join delete operations, are going to be extremely resource Intensive especially on bigger tables.
What is the best approach to delete all these rows? There are many constraints, triggers on these tables. Also, there might be some FK relations to other tables as well.
I had a pretty simple query like
select * from table_A
where email in (select email from table_B)
or
email not in (select email from table_c)
It ran for a very long time.
But if I ran the select with either of the conditions by itself it took just a second. Combining both conditions really slowed it down.
I have someone telling me that I should have put my AND statement in the join instead of the where part, so is there a difference in the where I put it. Is there a difference in the results in any way between the two here in the results in anyway?
Example:
Given a query:
But let’s take a simple one here:
Query(1)
Select ct1.Name, ct1.address, ct1.city, ct1.state, ct1.zipcode
From cutTableA ct1 Left join cutTableA ct2
On ct1.ID = ct2.ID
Where ct1.zipcode = '14124'
AND ct1.Name = 'Bob'
Query(2)
Select ct1.Name, ct1.address, ct1.city, ct1.state, ct1.zipcode
From cutTableA ct1 Left join cutTableA ct2
On ct1.ID = ct2.ID
AND ct1.zipcode = '14124'
Where ct1.Name = 'Bob'
I've come across a piece of code which i have never seen before.
ON T.CT_YEAR in
(
case
.[DBO].[FN_GET_YEAR]
(
CAST
(
C.[YEAR] AS VARCHAR(4)
[Code] ....
The CT_Year column is simply C for current year L for last year, O for Other, N for Next.
The Function simply returns the year value.
When I use the following SQL with the variable @CutOFFTID the second select statement query takes several minutes. If i run it replacing the value in the where clause with the acutal value of the variable it runs instantly.
DECLARE @CutOffTid int
SELECT @CutOffTid = isnull(max(ccas_id),0)
FROMdbo.fbs_trans (NOLOCK)
print 'Cut Off ID is ' + cast(@CutOffTid as char)
DECLARE @MinPeriod int
SELECT @MinPeriod = Min(period)
FROM agr.dbo.atrans
WHERE agrtid >@CutOffTid
I need to write a SQL script where a join condition is using date columns (effective_date, ineffective_date). The effective date columns can be slightly different (e.g. differ by a day) for some rows of data. I need the join condition to accommodate these date differences and return these rows of data as well.
I have a table which uses multiple joins to create another table but it turns out that the effective_date which is used in the join to match row together does not work all the time since some of the dates for the effective date column are out of sync meaning records that show data as missing even when the other table contains the data. I tried the SQL script below using the BETWEEN clause but it returning 6 rows instead of 3–
select t2.[entity_id]
,t2.[effective_date]
,[company_name]
,[last_accounts_date]
,[s_code]
,[s_code_description]
[Code] .....
create table deltavalues (planid varchar(10), baseval float, highval float)
Insert into deltavalues values ('1002', 2000,5000)
Insert into deltavalues values ('1003', 1000,0)
Insert into deltavalues values ('1004', 500,0)
Insert into deltavalues values ('1005', 1000,2000)
--I have below query , basically getting emnployee table balance between deltavalues table baseval column and highval column
select * from employee e join deltavalues d on e.planid = d.planid
where e.balance between d.baseval and d.highval
but here what i am requesting you is how can i change the highvalue to not include if it is 0
for example above example plan 1003, 1004 has highbal as 0 so i want to write a query to get employee data between 1000 and anyvalue (> 1000 - no limit)
same way for 1004 between 500 and no end values (infinity)
I am supposed to delete all rows from USER and its child tables based on PracticeID = '55' filter condition.
I have dynamically generated queries to delete child table first followed by parent. Table [EncounterSignOff] si child and [User] is parent.
I would like to know, whether the Query 1 is valid for deleting child records?
Query:1
DELETE Top(100000) FROM [dbo].[EncounterSignOff]
FROM [dbo].[User] INNER JOIN [dbo].[EncounterSignOff] ON [User].[UserID] = [EncounterSignOff].[UserId]
WHERE [User].PracticeID = '55';
Query:2
DELETE Top(100000) FROM [dbo].[User] WHERE [User].PracticeID = '55';
I have a population split between two vendors. One gets last names between A and R, the other the rest. Now, on a given date vendor 1 gets everybody.
I can accomplish this with a case statement on the upper range (R or Z), but it seems I should be able to do this without testing at all after the turnover date.
A small bit of the code:
declare @get_date datetime = convert(char(10),getdate(),101)
select top 10 pt.pt_id, pt.last_name
fromsmsmir.mir_acct a join smsmir.mir_pt pt on (a.src_sys_id = pt.src_sys_id
and a.pt_id = pt.pt_id
and a.from_file_ind = pt.from_file_ind
[Code] ....
Seems I should be able to not test the last name after the turnover date, but I can't figure out how.
Get output of SQL Procedure and assign it to a variable used in WHERE Clause
Later I want to use this variable in my code in the WHERE Clause
Declare @ProjectNo nvarchar(10)
--Now I want to assign it to output of a storedprocedure which returns only 1 value and use it in the below SELECT query.
SELECT ID from TABLEA where Project in (@ProjectNo)
How to do it. How to assign @ProjectNo to output of storedProcedure called 'GetProjNumber'
I've been experiencing difficulty with pulling records using a where clause date range. I'm using this:
select *
from dbo.ACCTING_TRANSACTION_hISTORY
where ath_postype = 'NTC' or ath_postype='NTD' and
ath_postdate >= '2013-01-01 00:00:00' and
ath_postdate <= '2013-01-05 23:59:59'
I've also tried variations of this without the time portion of the ath_postdate field (of type datetime) , but it still seems to be pulling records from 2009, etc.
I am wanting to get the job name based on sys.sysProcesses.[Program_name] column. Why is this query not returning any results even though the 2nd substringed guids are found the the sysJobs table?
SELECTCASE
WHEN RTRIM([program_name]) LIKE 'SQLAgent - TSQL JobStep (Job %' THEN J.Name
ELSE RTRIM([program_name])
END ProgramName
, Val1.UqID
, Val1.UqIDStr
[Code] ......
/****** Object: StoredProcedure [dbo].[dbo.ServiceLog] Script Date: 07/18/2014 14:30:59 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[ServiceLogPurge]
-- Purge records dbo.ServiceLog older than 3 months:
-- Purge records in small portions to avoid locking production tables
-- for a long time. The process takes longer, but can co-exist with
-- normal usage of the tables.
[Code] ...
*** Getting this error below when executing the code ***
Msg 102, Level 15, State 1, Procedure ServiceLogPurge, Line 45
Incorrect syntax near 'Failed:'.
For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
Dear friends,
I'm having a problem... maybe it's very simple, but with soo many work, right now I can't think well...
I need to filter rows in a dataflow...
I created a condition spli to that... maybe there is a better solution...
And the condition is: Datex != NULL(DT_DATE)
(Some DATE != NULL)
[Eliminar Datex NULL [17090]] Error: The expression "Datex != NULL(DT_DATE)" on "output "Case 1" (17123)" evaluated to NULL, but the "component "Eliminar Datex NULL" (17090)" requires a Boolean results. Modify the error row disposition on the output to treat this result as False (Ignore Failure) or to redirect this row to the error output (Redirect Row). The expression results must be Boolean for a Conditional Split. A NULL expression result is an error.
What is wrong??
Regards,
Pedro
I am trying to write an visibility function to have message shown based on two different IIF conditions:
If behavior is to Add a customer ( if message =NAME ALREADY EXISTS, return " NAME ALREADY EXISTS", otherwize return " NAME CREATED")If behavior is to Delete a customer (( if message =NAME DOES NOT EXIST, return "NAME DOES NOT EXIST", otherwize return "NAME SUCCESSFULLY DELETED")
I tried the following which doesn't work:
=IIF((UCase(First(Fields!Message.Value, "DataSetName")) = "NAME ALREADY EXISTS"), "WARNING: NAME ALREADY EXIST", "NAME CREATED"),
IIF((UCase(First(Fields!Message.Value, "DataSetName")) = " NAME DOES NOT EXIST"), "WARNING: NAME DOES NOT EXIST", " NAME DELETED")
I have a quite big SQL query which would be nice to be used using UNION betweern two Select and Where clauses. I noticed that if both Select clauses have Where part between UNION other is ignored. How can I prevent this?
I found a article in StackOverflow saying that if UNION has e.g. two Selects with Where conditions other one will not work. [URL] ....
I have installed SQL Server 2014 and I tried to use tricks mentioned in StackOverflow's article but couldn't succeeded.
Any example how to write two Selects with own Where clauses and those Selects are joined with UNION?
Hi
I am developing a scientific application (demographic forecasting) and have a situation where I need to update a variety of rows, say the ith, jth and kth row that meets a particular condition, say, x.
I also need to adjust rows, say mth and nth that meet condition , say y.
My current solution is laborious and has to be coded for each condition and has been set up below (If you select this entire piece of code it will create 2 databases, each with a table initialised to change the 2nd,4th,8th and 16th rows, with the first database ignoring the condition and with the second applying the change only to rows with 'type1=1' as the condition.)
This is an adequate solution, but if I want to change the second row meeting a second condition, say 'type1=2', I would need to have another WITH...SELECT...INNER JOIN...UPDATE and I'm sure this would be inefficient.
Would there possibly be a way to introduce a rank by type into the table, something like this added column which increments for each type:
ID
Int1
Type1
Ideal Rank by Type
1
1
1
1
2
1
1
2
3
2
1
3
4
3
1
4
5
5
1
5
6
8
2
1
7
13
1
6
8
21
1
7
9
34
1
8
10
55
2
2
11
89
1
9
12
144
1
10
13
233
1
11
14
377
1
12
15
610
1
13
16
987
2
3
17
1597
1
14
18
2584
1
15
19
4181
1
16
20
6765
1
17
The solution would then be a simple update based on an innerjoin reflecting the condition and rank by type...
I hope this posting is clear, albeit long.
Thanks in advance
Greg
PS The code:
USE
master
GO
CREATE DATABASE CertainRowsToChange
GO
USE CertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1 )
SELECT 2
INSERT INTO RowsToChange (Int1 )
SELECT 4
INSERT INTO RowsToChange (Int1 )
SELECT 8
INSERT INTO RowsToChange (Int1 )
SELECT 16
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 2
INSERT INTO AllRows (Int1 )
SELECT 3
INSERT INTO AllRows (Int1 )
SELECT 5
INSERT INTO AllRows (Int1 )
SELECT 8
INSERT INTO AllRows (Int1 )
SELECT 13
INSERT INTO AllRows (Int1 )
SELECT 21
INSERT INTO AllRows (Int1 )
SELECT 34
INSERT INTO AllRows (Int1 )
SELECT 55
INSERT INTO AllRows (Int1 )
SELECT 89
INSERT INTO AllRows (Int1 )
SELECT 144
INSERT INTO AllRows (Int1 )
SELECT 233
INSERT INTO AllRows (Int1 )
SELECT 377
INSERT INTO AllRows (Int1 )
SELECT 610
INSERT INTO AllRows (Int1 )
SELECT 987
INSERT INTO AllRows (Int1 )
SELECT 1597
INSERT INTO AllRows (Int1 )
SELECT 2584
INSERT INTO AllRows (Int1 )
SELECT 4181
INSERT INTO AllRows (Int1 )
SELECT 6765
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
USE
master
GO
CREATE DATABASE ComplexCertainRowsToChange
GO
USE ComplexCertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 2, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 4, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 8, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 16, 1
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 3, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 5, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 8, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 13, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 21, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 34, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 55, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 89, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 144, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 233, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 377, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 610, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 987, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 1597, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2584, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 4181, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 6765, 1
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows WHERE Type1=1) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
Hi, can anyone shed some light on this issue?SELECT Status from lupStatuswith a normal query it returns the correct recordcountSELECT Status from lupStatus GROUP BY Statusbut with a GROUP By clause or DISTINCT clause it return the recordcount= -1
View 3 Replies View Related