when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric
declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
Guys
I'm getting the above when trying to populate a variable. The values in question are :
@N = 21
@SumXY = -1303765191530058.2251000000
@SumXSumY = -5338556963168643.7875000000
When I run, SELECT (@N * @SumXY) - (@SumXSumY * @SumXSumY) in QA I get the result OK which is -28500190448996439680147097583285.072256 ie 32 places to left of decimal and 6 to the right
When I try the following ie to populate a variable with that value I get the error -
SELECT R2Top = (@N * @SumXY) - (@SumXSumY * @SumXSumY)@R2Top is NUMERIC (38, 10)
Any ideas ??
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
This is the error in my query:
[Err] 22003 - [SQL Server] Arithmetic overflow error converting numeric to data type numeric.
If tried [%TAX] DECIMAL (10, 2) I have the correct output, but I need 4 decimal in my output.
Code:
MATNUMB-VER-EXENUMB-VER-RIC%TAX
a476427228.1515,17%
b9241314323.1515,50%
c7781510878.1413,98%
d7480019601.2626,20%
e877618297.099,45%
[Code] .....
When I run the following sql query:
"update table set price = price * 1.1 "..
I get the following error : "Msg 8115, Level 16, State 8, Line 1.. Arithmetic overflow error converting nvarchar to data type numeric. The statement has been terminated."
The table is set to nvarchar, and i am just trying to make the prices go up 10%.
OK, so I have this query where I'm trying to subtract values like this, when I do this I am getting (Arithmetic overflow error converting varchar to data type numeric.) I have tried many different things, and now of these work, it'll either return 0 because it loses the .XXXXX.
Convert(DECIMAL(10,7),CAST([TIME_OF_COMPLETION] as DECIMAL(10,7)) - Convert(DECIMAL(10,7),CAST([OPR_DELIVERED_TIME] as DECIMAL(10,7)) round(cast(cast(hist.[TIME_OF_COMPLETION] AS float) as DECIMAL(15, 5)) - CAST(hist.[OPR_DELIVERED_TIME] AS FLOAT),1 SELECT convert(FLOAT,CAST('735509.00053' AS DECIMAL(10,5))) - convert(FLOAT,CAST('735509.00047' AS DECIMAL(10,5)))
The following function is throwing the error:
1) "Arithmetic overflow error converting numeric to data type numeric."
2) The variable @x should only be set when if condition is equal to 1. For any other values, it should not go inside if condition. Does the following if condition code meet that criteria?
ALTER FUNCTION [dbo].[fn_Calculator]
(
@abc bit
)
returns decimal(14,10)
as begin
[code]...
In my sql statement, I don't have any datatype as INT, when I run it, give me error as 'Arithmetic overflow error converting expression to data type int'.
example :
select column1, 2, 3 .....
from (select sum(float) as column1 , ....)
When I hop my cursor on top of column1, it shows (int,null)
I have the following code and i want to passed more than one value:
DECLARE @myvendedor AS varchar(255)
SET @myvendedor = '87,30'
print @myvendedor
SELECT top 10 ECOM.COM1,* from ecom (nolock) WHERE ecom.PORVEND=1 AND ECOM.VENDEDOR IN (@myvendedor)
Table Field ECOM.VENDEDOR is Numeric(4,0)
This error occur:
87,30 --Result of PRINT
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
I change :
DECLARE @myvendedor AS numeric(4,0)
and this error appear:
Msg 8114, Level 16, State 5, Line 2
Error converting data type varchar to numeric.
l'm running this procedure and l get this error. All l'm trying to do is to get the size of the database and its objects and what the size should be so that its sized right. Is there a better way of doing this ?
CREATE PROCEDURE sp_totalsize as
SELECT o.name 'Table', SUM(c.length) 'Record size',
MAX (i.rows) '#of rows',
CONVERT (decimal (10, 4), SUM (c.length * i.rows)/(1024.00 * 1024.00)) 'Approx. size (MB)'
FROM sysobjects o, syscolumns c, sysindexes i
WHERE o.id = c.id
AND o.id = i.id
AND (i.indid = 1 or i.indid = 0)
AND o.type = 'U'
GROUP BY o.name
COMPUTE SUM (CONVERT (decimal (10,4), SUM (c.length * i.rows)/(1024.00 * 1024.00)))
GO
(17 row(s) affected)
Server: Msg 8115, Level 16, State 2, Procedure sp_totalsize, Line 3
Arithmetic overflow error converting expression to data type int.
Under certain circumstances I am getting the following error
"Arithmetic overflow error converting expression to data type int"
when running the following code:
SELECT Count(*), Sum(GrossWinAmount)
FROM LGSLog
WHERE
(CurrentDate >= '9/1/2004 8:00:00 AM') And (CurrentDate <= '9/27/2004 7:59:59 AM')
If I remove the "Sum(GrossWinAmount)" from the select, it works fine. I therefore believe that Sum is causing the error. Is there a version of Sum that works with larger variables, such as a BigInt? If not, is there some way to do the equivalent using larger numbers? I need to allow for the possibility of obtaining one month's summary, and sometimes the summary value is apparently too large for Sum to handle.
I've got this error message while generate the output with ASP:
"Microsoft OLE DB Provider for SQL Server (0x80004005)
Arithmetic overflow error converting expression to data type int."
it indicate that the error is related to this line:
"rc1.Movenext"
where rc1 is set as objconn.Execute(sql).
Not all outputs result like this, it happens when it has many relationships with other records, especially with those records which also have many relationships with other records.
Can anyone suggest a solution?
I've tried to increase the size of the database file, but it doesn't work.
I've a SQL view performing a number of very precise calculations ie.495/(1.112 - (.00043499*((Col1 + Col2 + Col3))) + ( .00000055 * ((Col1+ Col2 + Col3)) * ((Col1 + Col2 + Col3))) - (.00028826 * Col4))) -450)/100Obviously this sometimes causes a precision issues because the floatand real datatypes don't hold precise values... My problem is thatconverting to the numeric or decimal datatype easily produces an errorif the precision is not big enough to hold the resulting output... Sohere's my questions:Does anyone see a problem with me maxing out the precision of thedecimal datatype (ie. use DECIMAL(38,8) across a couple dozeninter-related formulas?So the above code would now exec like this:495/(CONVERT(DECIMAL(38,8),1.112) -(CONVERT(DECIMAL(38,8),.00043499)*((Col1 + Col2 + Col3))) +(CONVERT(DECIMAL(38,8),.00000055) * ((Col1 + Col2 + Col3)) * ((Col1 +Col2 + Col3))) - (CONVERT(DECIMAL(38,8),.00028826) * Col4))) - 450)/100If anyone does see a problem with this approach, could you suggestanother alternative?
View 1 Replies View RelatedHi all,In the beginning of this month I've build a website with a file-upload-control. When uploading a file, a record (filename, comment, datetime) gets written to a SQLExpress database, and in a gridview a list of the files is shown. On the 7th of September I uploaded some files to my website, and it worked fine. In the database, the datetime-record shows "07/09/2006 11:45". When I try to upload a file today, it gives me the following error: Error: Arithmetic overflow error converting expression to data type datetime. The statement has been terminated.While searching in google, i found it might have something to do with the language settings of my SQLExpress, I've tried changing this, but it didn't help. What I find weird is that it worked fine, and now it doesn't anymore. Here is my code of how I get the current date to put it into the database:1 SqlDataSource2.InsertParameters.Add("DateInput", DateTime.Now.ToString());
Am I doing something wrong, or am I searching for a solution in the wrong place? best regards, Dimitri
Hi,
I'm having this error with my page, user picks the date -using the AJAX Control Toolkit Calender with the format of ( dd/MM/yyyy ).
It looks like the application current format is MM/dd/yyyy, because it shows the error page if the day is greater than 12, like: 25/03/2007
What is wrong?
Here is the error page:
Server Error in '/' Application.
Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Any help will be appreciated!
The following codes give me the error "arithmetic overflow error converting expression to data type datetime" Unfortunately, the datatype of date of this database is still varchar(50)
select date from tbltransaction
where datepart(wk,convert(datetime,date,103)) = 15
I am attempting to setup a replication from SQL Server 2005 that will be read by SQL Server Compact Edition (beta). I'm having trouble getting the Publication Wizard to create the Publication. Sample table definition that I'm replicating:
USE dbPSMAssist_Development;
CREATE TABLE corporations (
id NUMERIC(19,0) IDENTITY(1964,1) NOT NULL PRIMARY KEY,
idWas NUMERIC(19,0) DEFAULT 0,
logIsActive BIT DEFAULT 1,
vchNmCorp VARCHAR(75) NOT NULL,
vchStrtAddr1 VARCHAR(60) NOT NULL,
vchNmCity VARCHAR(50) NOT NULL,
vchNmState VARCHAR(2) NOT NULL,
vchPostalCode VARCHAR(10) NOT NULL,
vchPhnPrimary VARCHAR(16) NOT NULL,
);
CREATE INDEX ix_corporations_nm ON corporations(vchNmCorp, id);
GO
When the wizard gets to the step where it is creating the publication, I get the following error message:
Arithmetic overflow error converting expression to data type bigint. Changed database context to 'dbPSMAssist_Development'. (Microsoft SQL Server, Error: 8115).
I can find no information on what this error is or why I am receiving the error. Any ideas on how to fix would be appreciated.
Thanks in advance ...
David L. Collison
Any day above ground is a good day.
this query is running fine in 2008 , but its not working in 2005 below is the error Msg 8115, Level 16, State 2, Line 1 Arithmetic overflow error converting expression to data type int.there is some problem in converting date in cte
with a
as
(
SELECT dbname = DB_NAME(database_id) ,
[DBSize] = CAST( ((SUM(ms.size)* 8) / 1024.0) AS DECIMAL(18,2) )
,
COALESCE(CONVERT(VARCHAR(12), MAX(bus.backup_finish_date), 101),'01/01/1900') AS LastBackUpTime
FROM sys.master_files ms
inner join msdb.dbo.backupset bus ON bus.database_name = DB_NAME()
[code]....
I thought I'd post this quick problem and answer, as I couldn't find the answer when searching for it.
I tried to call a stored procedure on SQL Server 2000 using the System.Data.SqlClient objects, and was not expecting any unusual issues. However when I came to call the Fill method I received the error "Arithmetic overflow error converting expression to data type int."
My first checks were the obvious ones of verifying that I'd provided all the correct datatypes and had no unexpected null values, but I found nothing out of order. The problem turns out to be a difference on the maximum values for integers between C# and SQL Server 2000. Previously having hit issues with SQL Server integers requiring Long Integer types in VB6, I was aware that these are 32-bit integers, so I was passing in Int32 variables. The problem was that Int32.MaxValue is not a valid integer for SQL Server. Seeing as I was providing an abitrary upper value for records-per-page (to fetch all in one page), I was simply able to change this to Int16.MaxValue and will hit no further problems as this is also well beyond any expected range for this parameter.
If anyone can name off the top of their heads what value should be provided as a maximum integer for SQL Server 2000, this might be a useful addition, but otherwise I hope this spares others some hunting if they also experience this problem.
James Burton
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
I have a sql code that I am having some difficulty with. All I'm trying to do is get each department and sum the amount by month based on the date in the table. I am getting "error converting data type varchar to numeric".
Code:
select DEPARTMENT,
CASE
WHEN ((DATE >= '06/01/2014') AND (DATE <= '06/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JUNE',
CASE
WHEN ((DATE >= '07/01/2014') AND (DATE <= '07/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JULY'
from L27_PHAROS_DETAIL_DATA
WHERE Department = 'TECHNOLOGY SERVICES'
GROUP BY DEPARTMENT, DATE
ORDER BY DEPARTMENT
Hi Group:
I try to JOin to tables: Enterprise has a decimal(5,3) and COHIER has varchar 5. All I am getting is an error on converting data. How can I fix this problem.
SELECT a.Security_Value, b.Enterprise_Number, b.Enterprise_Description
FROM dbo.COHIER a INNER JOIN
dbo.Enterprise b ON a.Security_Value = b.Enterprise_Number
Thanks!!!!!!
I am using MS SQL Server 2008R2 along with VB 2010.The first question is: why is it even trying to convert anything to numeric? I have NO numeric data types. And I don't have any nvarchar data types either. I'm very confused.Doesn't nchar include any and all characters, in any combination? Should I change everything to text data type? Maybe something else? Some values are going to be blank. The Lab/Source Lots have numbers, letters and dashes.
My stored procedure:
ALTER PROCEDURE dbo.MChemsInsert
(
@LabLot nchar(10),
@Chem nchar(50),
@Source nchar(50),
@SourceLot nchar(10),
[code]....
Select SchoolNumber + ' ' + ShortSchoolName as SchoolList from tblSchoolsSubset
This is my simple sql statement which generates the error in the subject line.
SchoolNumber is type numeric and ShortSchoolName is nvarchar
There are only numbers in SchoolNumber.
Yes again a topic like this, I couldn't get an answer for my problem so I started a new topic.
Im getting this error for these lines:
$registreer = "INSERT INTO Gebruikerstelefoon (gebruikersnaam, telefoonnummer, volgnr) VALUES ('".$_SESSION['gebruikersnaam']."', '".$_POST["telefoonnummer"]."', '')";
mssql_query($registreer) or die("Fout bij toewijzen telefoonnummer.");
'telefoonnummer' (phonenumber) is nummeric, users can insert their phonenumber in a input field (text) and register along.. ( this is a second query for the column phonennumber) though this doesn't work..
Hi guys,
Been a while, also tried doing a search but no go.
Im getting this error in sql analyser:
Server: Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric
Both queries work fine individually, im trying to append them together, with column columns as below:
SELECT PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
COMMISSION_TXN.PERIODSEQ,
COMMISSION_TXN.SUPER_DISTRIBUTOR_CODE,
COMMISSION_TXN.PREMISE_CODE,
COMMISSION_TXN.DISTRIBUTOR_CODE,
COMMISSION_TXN.INTERNAL_EXTERNAL,
COMMISSION_TXN.SERVICE_ID,
COMMISSION_TXN.ACCOUNT_NUMBER,
COMMISSION_TXN.PROMOTION_CODE,
COMMISSION_TXN.PRODUCTDESCRIPTION,
COMMISSION_TXN.PRODUCTID,
COMMISSION_TXN.PROMOTION_NAME,
COMMISSION_TXN.EVENTTYPEID,
COMMISSION_TXN.MEASUREMENT_NAME,
Mobile_revenue = ('No Mobile revenue for txn level'),
COMMISSION_TXN.COMMISSION_AMOUNT,
product_id = ('No product id for txn level')
FROM COMMISSION_TXN INNER JOIN
PERIOD ON COMMISSION_TXN.PERIODSEQ = PERIOD.PERIODSEQ
union all
SELECT DISTINCT
PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
TC_Mobile_Usage.PERIODSEQ,
Dealer_Hierarchy.SUPER_DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE1 AS Dealer_premise_code,
Dealer_Hierarchy.DISTRIBUTOR_CODE,
internal_external = ('External'),
TC_Mobile_Usage.GENERICATTRIBUTE2 AS Service_Id,
account_number = ('none for txn file'),
promotion_code = ('Usage'),
Product_description = ('Usage'),
Product_id = ('Usage'),
promotion_name = ('Usage'),
TC_Mobile_Usage.EVENTTYPEID,
measurement_name = ('Usage'),
sum(TC_Mobile_Usage.VT_VALUE) AS Mobile_revenue,
sum(TC_Mobile_Usage.CONTRIBUTIONVALUE) AS Commission_Amount,
TC_Mobile_Usage.PRODUCTID
FROM TC_Mobile_Usage INNER JOIN
PERIOD ON TC_Mobile_Usage.PERIODSEQ = PERIOD.PERIODSEQ INNER JOIN
Dealer_Hierarchy ON TC_Mobile_Usage.GENERICATTRIBUTE1 = Dealer_Hierarchy.PARTICIPANTID
WHERE (NOT (TC_Mobile_Usage.PRODUCTID = 'iddv')) AND (NOT (Dealer_Hierarchy.POSITIONTYPEID LIKE 'MI %')) AND
(TC_Mobile_Usage.PERIODSEQ IN (107))--, 108, 110, 111, 112, 114))
group by PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
TC_Mobile_Usage.PERIODSEQ,
Dealer_Hierarchy.SUPER_DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE1,
Dealer_Hierarchy.DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE2,
TC_Mobile_Usage.EVENTTYPEID,
TC_Mobile_Usage.PRODUCTID
Any suggestion on how to fix it?
Champinco
Hi
Please help me out
declare @CID numeric(3,0)
set @CID = 121
SELECT *
from Table_name
where ID Like ''''+@CID+'%'''
I am getting error like
Msg 8114, Level 16, State 5, Line 3
Error converting data type varchar to numeric.
T.I.A
I am having difficulty with my sql and I am not sure what do to. I am new to this. Any help you can give would be helpful.
Here is the statement that is giving me trouble. If I take this out of my Sql query everything runs fine.
CASE clm_att1
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE ''
END as AccessFeeFinal,
Below is my full query.
SELECT
--clms_sku,
--clms_line,
--clm_prod,
clio_type,
clm.clm_id1,
clm.clm_rcvd,
CLM_DOUT,
clm_wkpct,
clm.clm_1a,
clm.clm_12a,
clm.clm_12b,
clm.clm_55d,
clm.clm_clir,
clm.clm_65a,
clm.clm_medb2,
clm.clm_tchg,
clm.clm_base,
clm.clm_stades,
clm.clm_meda4,
CLM_H30 =
Case
When CLM_H30 = 0.00 Then clm_sppo
else clm_H30
End,
clm_prod =
CASE
WHEN CLMS_sku = 'NEGO' THEN 'NEG'
WHEN CLMS_sku = '% OF CHGS' THEN 'NEG'
ELSE clm_prod
End,
"clm_nego" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE clm_nego
END,
"clm_sppo" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE clm_sppo
END,
clm_1e,
clm.CLM_ATT1 as Note,
CASE clm_att1
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE ''
END as AccessFeeFinal,
CLM_ATT2,
CLM_ATT3,
clio_fee04 as "ACCESSFEEIMPACT",
"(clm_sppo/CLM_TCHG) * 100" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE (clm_sppo/CLM_TCHG) * 100
END,
clio_wrk1 as MAS90#
FROM dbo.clm clm Join
dbo.cli cli ON clm.clm_clir = cli.cli_id1 JOIN
dbo.clip clip ON cli.cli_id1 = clip.clip_id1 JOIN
dbo.clio clio ON cli.cli_id1 = clio.clio_id1
INNER JOIN dbo.clms clms ON clms.clms_id = clm.clm_id1
WHERE
(clip.clip_prd IN ('NEG', 'ADV')) AND
(clm_prod = 'ADV' OR clms_sku = 'NEGO' OR clms_sku = '% OF CHGS')AND
(CLM_STADES IN ('DONE','DUPO','DUPL'))and
clm_adjto = '' AND CLM_TCHG > 0. and
(clio.clio_type = 'AC')
I am having problems with a statment that I am writing.
The prop_uac is a alpha field and prop_disc is a numeric field. What I was trying to do is when the alpha field is not populated automatically pull from the numeric field. Then I wanted to put all of the results into one column. Can this be done? below is my statement. I hope you can help me.
Prop_uac =
CASE
WHEN prop_uac = '' THEN prop_disc
else prop_uac
End
hello everyone... i have some problem to with my trigger.. after execute the trigger.. i got this errro "Msg 8114, Level 16, State 5, Procedure trg_InsertPVReadingMeter, Line 14
Error converting data type varchar to numeric."
below is my command sql table PVReadingMeter
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[PVReadingMeter] Script Date: 03/25/2008 01:18:06 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[PVReadingMeter](
[PV_reading_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_PVReadingMeter_PV_reading_id] DEFAULT (newid()),
[PV_reading_date_time] [datetime] NOT NULL,
[PV_reading_meter] [decimal](8, 2) NOT NULL,
[PV_normalized_monthly_yield] [float] NOT NULL,
[PV_normalized_monthly_energy_yield] [float] NOT NULL,
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_PVReadingMeter_PV_application_id] DEFAULT (newid()),
CONSTRAINT [PK_PVReadingMeter] PRIMARY KEY CLUSTERED
(
[PV_reading_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[PVReadingMeter] WITH CHECK ADD CONSTRAINT [FK_PVReadingMeter_Photovoltaic] FOREIGN KEY([PV_application_id])
REFERENCES [dbo].[Photovoltaic] ([PV_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
below is my trigger
quote:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE Trigger [trg_InsertPVReadingMeter]
on [dbo].[PVReadingMeter]
for insert
as
begin
DECLARE @PVReadingMeter VARCHAR(100)
DECLARE @PVNormalizedMonthlyYield VARCHAR(100)
SELECT @PVReadingMeter = (SELECT PV_reading_meter + '' FROM Inserted)
SELECT @PVNormalizedMonthlyYield = (SELECT PV_normalized_monthly_yield + '' FROM Inserted)
-- Print the name of the new author
PRINT 'The new photovoltaic reading meter"' + @PVReadingMeter +'" is added.'
PRINT 'The photovoltaic normalized monthly yield is "' + @PVNormalizedMonthlyYield +'"'
end;
now, this is command to insert the values into PVReadingMeter table using trigger that has been created....
quote:insert into PVReadingMeter (PV_reading_date_time, PV_reading_meter, PV_normalized_monthly_yield,
PV_normalized_monthly_energy_yield, PV_application_id)
values (getDate(), 1.1, 4234.33, 43.44, '3D23C4FE-F6FC-475E-8CEC-23FE4E738EB9')
so, i got this error... Msg 8114, Level 16, State 5, Procedure trg_InsertPVReadingMeter, Line 14
Error converting data type varchar to numeric.
what should i do???
im trying to convert this Code from Varchar to Numeric(CAST(ISNULL(del.[Day 60 AMT],0) AS NUMERIC(6,3))+ CAST(ISNULL(del.[Day 90 AMT],0) AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 120 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 150 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 180 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 210+ AMT],0)AS NUMERIC(6,3))) > 0
i got an error please help.
DECLARE @ENTITY nvarchar (100)
set @ENTITY = 'AccidentDimension'
DECLARE @FIELD nvarchar (100)
set @FIELD = 'JurisdictionState'
DECLARE @KEYID nvarchar (100)
SET @KEYID = '1234567890'
DECLARE @VALUE nvarchar (100)
SET @VALUE = 'WI'
DECLARE @WC_TABLE NVARCHAR(100)
SET @WC_TABLE = 'WorkingCopyAdd' + @ENTITY
DECLARE @SQL1 NVARCHAR (1000)
SET @SQL1 = 'INSERT INTO ' + @WC_TABLE+ ' (Claim, '+ @Field +') VALUES ('''+ @KEYID +''', '''+@VALUE+''')'
EXECUTE sp_executesql @SQL1
Can somebody help me. I get this error:
Error converting data type varchar to numeric.
while executing this Dynamic TSQl Command