I have a client with a fairly simple table as illustrated in my sample code. Their interesting requirement is that the records would be listed horizontally, end-to-end as I hope you can visualize based on what I'm providing here. Two other characteristics/specs of note, 1) there could be as few as two records end-to-end in a row or as many as 100 and 2) of course the column headings would have to be unique.
create table #tmpEndToEnd ( ID int identity, ClientID char(10), Agency varchar(20), Clinician varchar(20), Goal varchar(50)
I have a scenario where the second SELECT statement in my query has to be removed such that the logic needs to be included in the CTE select statement itself.
How this can be done? The columns in the final SELECT statement is having bit complexity.
My query is below:
WITH Local_EOL_Dioxin_Statistic_Import_New AS ( SELECT CASE WHEN ISNUMERIC(vr.stringValue) = 1 THEN vr.stringValue
ppl, I'm a student who really needs help with SQL.The problem is i have three tables, member,rent and tape.when a person rents a tape,an entry will be made to the rent table.How do i make sure that the data (category,director,etc) is according(or the same) to the tape_id in the tape table?pleassseeee help.
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
Hello all, I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation. and it also logs FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone. As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log the above dos cmd works 100%
However when I use the Execute Process Task I get this error [Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles User::gsPreplogInput = ex.log User::gsPreplogOutput = out.log
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
The customer.bat file will have the following code: tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem: The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Hi, I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%) I would get an error message saying: "550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process" and then the upload failed. I'm using SQL Express. Does anybody know what's the cause? Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and every time the process id is different. Here it is 3880.
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process: Spid 55 55 ecid 5 5 Ecid 0 0 ObjId 0 1784601646 IndId 0 0 Type DB PAG Resource 1:1976242 Mode S IS Status TransID GRANT GRANT TransID 0 16980 TransUOW 00000000-0000-0000-0000-000000000000 00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH CMD AWAITING COMMAND Physycal id 1059 Login time 2007-07-05 04:29:53.873 nat address DFF06EBF974D Wait type 0x0046 HostName . BlkBy . DBName grpprddb CPUTime 54331 DiskIO 1059 ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request: select * from SYSOBJECTS where id=1784601646
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
'check to see that student num is in the db Dim connect as SqlConnection Dim strSelect as String Dim cmdSelect as SqlCommand Dim strDbResult as SqlDataReader
connect = New SqlConnection(connStr) strSelect = "SELECT stu_num, stu_fname, stu_lname FROM " + stuTable + " WHERE stu_num=@stuNum" cmdSelect = New SqlCommand(strSelect,connect) cmdSelect.Parameters.Add("@stuNum", txtStdNum.text)
Dim stuFName as String Dim stuLName as String Dim stuEmail as String Dim strRandom as String Dim strPassword as String Dim i as Integer Dim charIndex as String Dim stuMailMessage as MailMessage Dim strHTMLBody as String
In my DB I have a table with the columns stu_num, stu_fname and stu_lname. Each of these columns contains rows with data. However, the proceeding code gives me this error: Invalid attempt to read when no data is present (line 58 --> stuFName = strDbResult("stu_fname") ).
What am I doing wrong here? How do I assign the stu_fname in the DB to the page level variable stuFName?
As a little aside how do I say "If no record was found matching stuNum Then" ... ??
I have a typical scenario here where I am trying to assign a variable a value using another variable, for that I am using two execute SQL task , the fisrt one assigns the first variable a value and then the second one uses the first variable to evaluate and then assigns a value to another variable. The first execute sql task works fine , however the second one fails with the following error
"failed with the following error: "An error occurred while extracting the result into a variable of type (DBTYPE_I4)". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. "
Here is the query I am using to assign the value in my second execute sql task
select (CASE
WHEN Sum(col1) <> 0 AND ? = 'M' THEN 'M'
WHEN Sum(col2) <> 0 AND ? >= 'T' THEN 'T'
WHEN Sum(col3) <> 0 AND ? >= 'R' THEN 'R'
ELSE 'S'
END) as Current
FROM dbo.TABLE1
I am passing the variable by mapping the parameters and then assigning the value using a single row result set. Can someone please tell me where am I going wrong?
Hi, I have a sqldatasource which returns the result I want, but I need to assign it to a label or text box. Is there an easy way of doing this? I attempted it using this code: PropertyFriendIDLabel.Text = PropUserIdSqlDataSource Thanks
Hello, I am using SessionParameters within a sqldatasource control, which is the datasource for a formview control. The Session["PoolID"] has a value which is '0000009485'.<InsertParameters><asp:SessionParameter SessionField="PoolID" Name="pool_id" Size="10" Type="String" ConvertEmptyStringToNull="true" /> </InsertParameters>But when I click 'Save' I get the message 'Cannot insert the value null into column 'pool_id'. Column does not allow nulls. Insert fails'.Do i need to specify something like DefaultValue = <%Session["PoolID"] %>?Thank you in advance for your help.RajanP.S. How can I avoid double line spacing while writing a post? Thanks.
I’ve reconfigured Microsoft’s IBS Store shopping cart to function within a small e-commerce website. What I am trying to do is to modify the code slightly in order to use a third party credit card processing center. The situation is this: once the customer clicks the final "check out" button, a stored procedure writes all of the product ordering information into the database. I, then, capture what they're wanting to purchase with the following SQL statement:
Hi, I want to give 'Execute' permission for all the sp to a particular user. Any straight way of doing this then to go to each sp and give him permission for every sp. TIA.
Ok guys, I'm realitvely new to the whole database development stuff, but I have a very important project to finish using SQL and ASP. I am to design a new links manager for a website. Right now I have the following: The ability to add a link, and edit it The ability to add a category and edit it
When you go to add a link, a list of categories is provided for you, with checkboxes. What I need to do is figure out how to assign multipule categories to one link. I have a Cross-Referencing table with three fields: CrossRefID LinkID and CatID.
If you need more clarification, post here and let me know.
Hello everyone. I wanted to learn to assign and change a schema names used in my table. I dont want a dbo. in my tables. I want to give a personal name like the adventureworks database has. (Such as sales.salesdetails, humanresources.employee and all)
> So how i do create a table with a schema name sales and > How do i change my for example dbo.employee to sales.employee ??
I tried Create table sales.employee { statements }
hello,i would like to loop through a record set and assign each value to thesame string, (example i would like to return all of the first name inthe authors table = Authors_total.)should i use a cursor or just a loop to do this? I have had sometrouble with the syntax in a cursor.nicholas.gadacz
I am using SQL SERVER 2000. Until now my application used the default user "sa", but now the illigal access to my database make me move to a more secure login. i am new to this concept. i need to create a login, which i am successful in creating, but my problem is I need to allow only this user to access my database and no other user should login my database. please can any one explain how to do this. its very urgent.
