T-SQL (SS2K8) :: CTE With Linked Server - Multipart Identifier Could Not Be Bound
Jul 17, 2014
Interesting issue. I have the following CTE that JOINs some tables from a Linked Server which is our SAP data. This CTE is in a stored procedure and then executed via a SQL Server Agent Job on a timer (every 10 minutes). This ran fine for almost 20 hours and then dies with a multipart identifier could not be bound error (exact error below CTE).
Server running the job: SQL Server 2008 R2 (no SP)
Linked Server: SQL Server 2005 SP3 housing SAP
CTE:
WITH TaktValues ([Counter], NODE, PLNNR) AS
(
SELECT
MAX(plpo1.ZAEHL) AS [Counter], MAX(plpo1.PLNKN) AS NODE, plpo1.PLNNR
FROM
etl.PLPO plpo1
GROUP BY plpo1.PLNNR
[Code] ....
Error:
Msg 8180, Level 16, State 1, Line 1
Statement(s) could not be prepared.
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "Tbl1008.AUFNR" could not be bound.
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "Tbl1008.AUFNR" could not be bound.
i am facing a bizarre problem, accessing data from a remote server which has been linked to my sql. My SQL server is 2005 and the remote server is SQL 2000. i have linked the remote server (called LinkedServer) so that when i run this query: SELECT * FROM LinkedServer.SomeDB.dbo.SomeTable executes successfully! However, when i run a similar query like this: SELECT Column1 AS Col1, LinkedServer.SomeDB.dbo.SomeTable.Column2 as Col2, Alias.Column3 as Col3 FROM LinkedServer.SomeDB.dbo.SomeTable INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable1 ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = LinkedServer.SomeDB.dbo.SomeOtherTable1.Column3
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable2 AS Alias ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = Alias.Column3
It gives me this error: The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column2" could not be bound. The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column3" could not be bound. I have noticed that this error is generated only for the selected columns whose path has either been repeated (e.g. "LinkedServer.SomeDB.dbo.SomeTable.Column2" as opposed to "Column2") or for columns which are from aliased tables.
What is going on?!?!?!??!?!?!
Any Help would be tremendously appreciated!!!! 8..)
I've found lot of other people experiencing the same problem I'm having, but I can't get any of their solutions to work for me. I have two tables with the exact same structure Today and Yesterday. I'm trying to compare a price column from Yesterday's column against Today's and I'm getting the 'The multi-part identifier '' could not be bound' error. Here's the code I'm using:
DECLARE @ProgramName varchar(100) SET @ProgramName = 'AffiliateName'
SELECT CJ_RawImport_Today.* FROM CJ_RawImport_Today WHERE (CJ_RawImport_Today.ProgramName = @ProgramName) AND (CJ_RawImport_Today.RetailPrice < CJ_RawImport_Yesterday.Price)
I have a function in VBA (Access) that passes a sql string into a passthrough query that is server side executed
I changed the inner joins and left joins to where statements but this particular sql string crashes with the titled error folowed by the multi-part identifier "task_backup.activityid" could not be bound (#4104) and then it repeats that one more time in the same message
Which i think the second "sub message" is for the null criteria
INSERT INTO NewTasksBeingAdded ( [Activity ID], [WBS Code], [Activity Name], Area, Line) SELECT [TASK Excel Data].[Activity ID],[TASK Excel Data].[WBS Code], [TASK Excel Data].[Activity Name], [TASK Excel Data].Area, [TASK Excel Data].Line FROM [TASK Excel Data] where [TASK Excel Data].[Activity ID] = TASK_BackUP.[Activity ID] and TASK_BackUP.[Activity ID] Is Null
Hope I'm asking this question in the correct forum.
I'm a newbie in Reporting Services and currently working my way through the tutorials with AdventureWorks. Came across this error while doing the MSDN tutorial for Advanced Features, lesson 5 - user defined functions.
Created a new report, copied the following to the query screen:
SELECT udf.ContactID, udf.FirstName + N' ' + udf.LastName AS Name, c.Phone, c.EmailAddress, udf.JobTitle, udf.ContactType FROM ufnGetContactInformation(@ContactID) udf JOIN Person.Contact c ON ufn.ContactID = c.ContactID
I'm following the directions to the letter, and consistently get the following error:
"The multi-part identifier "ufn.ContactID" could not be bound."
"The multip-part identifier "ufn.ContactID" could not be bound. (Microsoft SQL Server, Error: 4104)"
I'm running SQL 2005 Enterprise on Windows XP.
Any help you can give will be much appreciated! Thank you.
I use IBM WebSphere Portal and am desperately trying to move data from the default Cloudspace Database to MS SQL Server 2005, of course following the official guidelines.
What happens is that WebSphere's Configuration Wizard fails because of an error caused by the SQL Script. Trouble is, I can't bring it to work not even in the SQL Server Management Studio.
What follows is the code generated by the script. The error is caused by the last "check"-constraint (colored in red). CREATE TABLE community.APP_DESC ( OID BINARY(18) NOT NULL, TYPE INTEGER NOT NULL, APP_NAME NVARCHAR(255) NOT NULL, IS_ACTIVE INTEGER NOT NULL, JSR_VERSION NVARCHAR(255), GUID NVARCHAR(255), WEB_MOD_OID BINARY(18), WEB_MOD_SL BINARY(18), WSRP_PROD_OID BINARY(18), WSRP_PROD_SL BINARY(18), DEFAULT_LOCALE NVARCHAR(64), CREATED BIGINT NOT NULL, MODIFIED BIGINT NOT NULL, WSC_GROUP_ID NVARCHAR(255), CONSTRAINT PK20 PRIMARY KEY NONCLUSTERED (OID), CONSTRAINT FK20A FOREIGN KEY (WEB_MOD_OID) REFERENCES community.WEB_MOD (OID) ON DELETE CASCADE, constraint FK20B FOREIGN KEY (WSRP_PROD_OID) REFERENCES community.WSRP_PROD (OID) ON DELETE CASCADE, CONSTRAINT CC20A CHECK (((community.APP_DESC.WEB_MOD_OID IS NULL) AND (community.APP_DESC.WEB_MOD_SL IS NOT NULL)) OR ((community.APP_DESC.WEB_MOD_OID IS NOT NULL) AND (community.APP_DESC.WEB_MOD_SL IS NULL))) )
And that's what SQL Server 2005 told me: Msg 4104, Level 16, State 1, Line 1The multi-part identifier "community.APP_DESC.WEB_MOD_OID" could not be bound.Msg 4104, Level 16, State 1, Line 1The multi-part identifier "community.APP_DESC.WEB_MOD_SL" could not be bound.Msg 4104, Level 16, State 1, Line 1The multi-part identifier "community.APP_DESC.WEB_MOD_OID" could not be bound.Msg 4104, Level 16, State 1, Line 1The multi-part identifier "community.APP_DESC.WEB_MOD_SL" could not be bound.
BTW, as this is a generated script I do not have the possibility to change it. Because it has been released by IBM I am rather convinced that it is correct - therefore I was wondering whether SQL Server 2005 has a known bug that makes it refuse "check"-constraints.
HI Gurus, Trying to alter an existing Trigger on an insert event on one of our tables. The following sql generates: "Msg 4104, Level 16, State 1, Procedure insxECSIBHEADER, Line 4 The multi-part identifier "INSERTED.PROJECT" could not be bound." Here's the SQL itself: set QUOTED_IDENTIFIER ONgoALTER TRIGGER [insxECSIBHEADER] ON [dbo].[xECSIBHeader] AFTER INSERT AS BEGIN IF SUBSTRING(INSERTED.[PROJECT],4,2) = 'DR' BEGIN UPDATE xECSIBHEADER SET xECSIBHEADER.[IBNUMBER] = LEFT(xECSIBHEADER.[PROJECT],2) + 'D' + Cast(xECSIBHEADER.[IBHeaderKey] AS VarChar(15)) FROM INSERTED INS INNER JOIN xECSIBHEADER ON xECSIBHEADER.[IBHeaderKey] = INS.[IBHeaderKey] WHERE INS.[IBNUMBER] IS NULL END ELSE BEGIN UPDATE xECSIBHEADER SET xECSIBHEADER.[IBNUMBER] = LEFT(xECSIBHEADER.[PROJECT],2) + Cast(xECSIBHEADER.[IBHeaderKey] AS VarChar(15)) FROM INSERTED INS INNER JOIN xECSIBHEADER ON xECSIBHEADER.[IBHeaderKey] = INS.[IBHeaderKey] WHERE INS.[IBNUMBER] IS NULL END END
I am trying to execute a query in SQL SERVER 2005 for calculating days difference for each. I created a function because there are a lot of calculations. In SPeriods table I have 4 fields that I want to pass as parameters in the table-value function TFC_date_diff, but I receive the error "The multi-part identifier "CC.start_period_no" could not be bound. Is there a solution for this ? SELECT CC.start_period_no, CC.end_period_no, CC.start_year, CC.end_year, TFC_date_diff.dates_differnceFROM dbo.[SPeriods] AS CC CROSS JOIN dbo.TFC_date_diff(CC.start_period_no, CC.end_period_no, CC.start_year, CC.end_year) AS TFC_date_diff_1 Thanks a lot in advance!
Hi All , i am getting this multi-part identifier not found error followingis my stored procedure
ALTER PROCEDURE [dbo].[Ab_LP]
@gyr char(4),
-- 'A', --'S', only submitted will be returned;
--A=All, or any other letter other than 'S', all will b returned;
@ExONo char(1)='A'
AS
DECLARE @sql VARCHAR(1500)
SET @sql = 'SELECT LTRIM(RTRIM(t1.Last_Name))+'',''+LTRIM(RTRIM(t1.First_Name)) as Name,t2.emaddr as Email,t3.* FROM namesTable as t2,PersonalTable as t1'
IF (@ExONo='S')
SET @sql = LTRIM(RTRIM(@sql)) + ',LePAb AS t3 WHERE t3.emaddr = t2.emaddr AND t2.code = ''ABC'' AND t1.Emplid=t2.Emplid '
ELSE
SET @sql = LTRIM(RTRIM(@sql)) + ' LEFT JOIN LePAb AS t3 ON
t3.emaddr=t2.emaddr WHERE t2.code = ''ABC'' AND t1.Emplid=t2.Emplid '
IF (@gyr <> 0)
SET @sql = LTRIM(RTRIM(@sql)) + ' AND t2.gyr='+@gyr
ELSE
SET @sql = LTRIM(RTRIM(@sql)) + ' AND t1.Code = ''ABC'' '
SET @sql = LTRIM(RTRIM(@sql)) + ' ORDER BY Name'
print @sql
EXEC (@sql)
I am geting an error as
The multi-part identifier "t2.emaddr" could not be bound. i have tried all the possible tricks but in vain. plz help.. thanks in advance
for Version_Resources_Allocation.week IN ([1],[2],[3],[4],[5],,[7],,[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],[21],[22],[23],[24],[25],[26],[27],[28],[29],[30],[31],[32],[33],[34],[35],[36],[37],[38],[39],[40],[41],[42],[43],[44],[45],[46],[47],[48],[49],[50],[51],[52], [53])) as pvt
inner join Version_Resources_Allocation on WorkTeam.workteam_id = Version_Resources_Allocation.workteam_id
inner join WorkTeam_Resources_Assignments on WorkTeam_Resources_Assignments.resource_id = Version_Resources_Allocation.resource_id
and WorkTeam_Resources_Assignments.workteam_id = Version_Resources_Allocation.workteam_id
inner join calendar on calendar.year = WorkTeam_Resources_Assignments.year
and calendar.month = WorkTeam_Resources_Assignments.month
and calendar.year = Version_Resources_Allocation.year
and calendar.week = Version_Resources_Allocation.week
inner join Version on Version.version_id = Version_Resources_Allocation.version_id
inner join Account on Account.account_id = Version.account_id
--hierarchy joins
inner join line_module on line_module.line_module_id = WorkTeam.line_module_id
inner join Account as acc on acc.account_id = line_module.account_id
inner join vp on vp.vp_identifier = acc.vp_identifier
inner join division on division.division_id = vp.division_id
--Resources joins
inner join msp_resources on msp_resources.emp_code = Version_Resources_Allocation.resource_id
where Version_Resources_Allocation.resource_id in (select top 100 percent emp_code from #staffEmployees where id between ((@quota * (@pageIndex - 1) + 1)) and (@quota * @pageIndex) order by res_name)
and
(
(Version_Resources_Allocation.year = @startYear and Version_Resources_Allocation.week >= @startWeek and Version_Resources_Allocation.week <= (case when @startYear = @endYear then @endWeek else @maxWeeksInFirstYear end))
or
(Version_Resources_Allocation.year = @endYear and Version_Resources_Allocation.week <= @endWeek and Version_Resources_Allocation.week >= (case when @startYear = @endYear then @startWeek else 1 end))
)
and
(
pct_availability!=0 or (pct_availability is null and staffing_pct_availability!=0)
)
and
(
(WorkTeam_Resources_Assignments.year = @startYear and WorkTeam_Resources_Assignments.month >= @startMonth and WorkTeam_Resources_Assignments.month <=
case when @startYear = @endYear then @endMonth else 12 end
)
or
(WorkTeam_Resources_Assignments.year = @endYear and WorkTeam_Resources_Assignments.month <= @endMonth and WorkTeam_Resources_Assignments.month >=
case when @startYear = @endYear then @startMonth else 1 end
SELECT [Hourly] ,count(case when C.Documenttype=1 THEN '1' END) as EDI ,count(case when C.Documenttype=2 THEN '2' END) as SI ,count(case when C.Documenttype=1 THEN '1' END) + count(case when C.Documenttype=2 THEN '2' END) as GrandTotal
I try to automate ans insert (that ok) and update jobs
but these part is not working I got the following error
The multi-part identifier "t2.customerid" could not be bound.
any idea'll be welcomed I'm not so good in programming and sql
update [ADOS].[dbo].[Customers] set t2.companyname = t1.companyname where t2.customerid = (SELECT t1.companyname FROM [Northwind].[dbo].[Customers] T1 inner join [ADOS].[dbo].[Customers] T2 on (t1.customerid = t2.customerid and t1.companyname <>t2.companyname))
Hello, I am running Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86) Apr 14 2006 01:12:25 Copyright ( c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 260 0: Service Pack 2) on Windows. using jdbc <driver name="com.microsoft.sqlserver.jdbc.SQLServerDriver" tag="sqlserver" url="jdbcqlserver://[host]:[port];DatabaseName=[dbname];user=[user];password=[password]"> <jar subdir="sqlserver" name="sqljdbc.jar" /> </driver>
I print out the following info to make sure I get the right driver: 'JDBC driver details' , ' driver class name=com.microsoft.sqlserver.jdbc.SQLServerDriver driver majorVersion=1 driver minorVersion=1 driver a genuine JDBC CompliantTM driver=true'
I execute the following query SELECT p.cust_id, p.stock_units FROM dbo.customer_portfolio p WHERE p.stock_price = ?
and get this message: com.microsoft.sqlserver.jdbc.SQLServerException: The multi-part identifier "p.stock_price" could not be bound. stack trace: [com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source) com.microsoft.sqlserver.jdbc.SQLServerParameterMetaData.<init>(Unknown Source) com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.getParameterMetaData(Unknown Source)
If I change it to:
SELECT cust_id, stock_units FROM dbo.customer_portfolio WHERE stock_price = ?
i.e. do not use correlation names, it executes as expected. Is there anything wrong with using correlation names in the query ? or is it a bug ?. Any help will be welcome.
I am trying to run a Common Table Expression (CTE) in SQL Server 2005 but I receive the error
'Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "ep.ProjectUID" could not be bound'.
What does this error mean?
My SQL is:
Code Snippet WITH Tasks (TaskParentUID, TaskUID, ProjectName, TaskName, Level) AS ( SELECT et.TaskParentUID, TaskUID, ProjectName, TaskName, 0 AS Level FROM dbo.MSP_EpmProject as ep INNER JOIN dbo.MSP_EpmTask as et ON ep.ProjectUID = et.ProjectUID WHERE et.TaskParentUID = et.TaskUID UNION ALL SELECT et.TaskParentUID, et.TaskUID, ep.ProjectName, et.TaskName, Level + 1 FROM dbo.MSP_EpmProject as ep INNER JOIN dbo.MSP_EpmTask as et ON ep.ProjectUID = et.ProjectUID INNER JOIN Tasks AS t ON et.TaskParentUID = t.TaskUID ) SELECT t.TaskParentUID, t.TaskUID, ProjectName, t.TaskName, Level FROM Tasks as t INNER JOIN dbo.MSP_EpmTask as et ON Tasks.TaskParentUID = et.TaskParentUID WHERE Level = 0
The TaskParentUID has data-type of UniqueIdentifier and it's child is TaskUID which is also a UniqueIdentifier type. My goal of this CTE is to list all child TaskUIDs for each TaskParentUID in a recursive fashion.
Hi,We moved our stored procedure from sql 2000 to sql 2005 and we're getting few weird errors:Msg 4104. multi-part identifier /table.column/ could not be bound.Do we have to change anything in the stored procedure in order to make it work for sql 2005? Errors point to lines 25 and 68:25: IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts_Table]') AND type in (N'U'))68: ELSEBelow is the code. Thanks in advance.set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[sp_refresh_GC_Contacts]ASDECLARE@dropSQL varchar(2000)BEGINSET NOCOUNT ON;--SET IDENTITY_INSERT GC_Contacts_Table ON-- drop the fulltext indexIF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts]') AND name = N'pk_gc_contacts')DROP FULLTEXT INDEX ON [dbo].[GC_Contacts] -- drop the unique indexIF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts]') AND name = N'pk_gc_contacts')DROP INDEX [pk_gc_contacts] ON [dbo].[GC_Contacts] WITH ( ONLINE = OFF )-- If table exists truncate itIF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts_Table]') AND type in (N'U'))BEGIN TRUNCATE TABLE [dbo].[GC_Contacts_Table]INSERT INTO [dbo].[GC_Contacts_Table] --insert sql next lineSELECT Title, FirstName AS First_Name, MiddleName AS Middle_Name, LastName AS Last_Name,Suffix, Company, JobTitle AS Job_Title, Email, PrimaryPhoneNumber AS Primary_Phone_Number, PrimaryAddress1 AS Primary_Address_1, PrimaryAddress2 AS Primary_Address_2, PrimaryAddress3 AS Primary_Address_3, PrimaryCity AS Primary_City, PrimaryState AS Primary_State,PrimaryZip AS Primary_Zip, PrimaryCountry AS CPrimary_ountry, Notes, Alias, FullName AS Full_Name,dbo.Addresses.Type AS AddressType, dbo.Addresses.Address1 AS Address1,dbo.Addresses.Address2 AS Address2,dbo.Addresses.Address3 AS Address3, dbo.Addresses.City AS City, dbo.Addresses.State AS State,dbo.Addresses.Zip as Zipcode, dbo.Addresses.Country AS Country, dbo.Addresses.PhoneNumber AS PhoneNumber,dbo.Addresses.FaxNumber AS FaxNumber, SubAward_Only = CASE SubAwardOnlyWHEN 0 THEN 'No'WHEN 1 THEN 'Yes'END,dbo.ContactsSTUDF.*-- IDENTITY(int, 1,1) AS GC_Contact_ID-- INTO dbo.GC_Contacts_TableFROM dbo.Contacts LEFT OUTER JOIN dbo.ContactAddresses ON dboContacts.ID = dboContactAddresses.ContactIDLEFT OUTER JOIN dbo.Addresses ON dbo.Addresses.ID = dboContactAddresses.AddressIDLEFT OUTER JOIN dbo.ContactsSTUDF ON dbo.Contacts.ID = dbo.ContactsSTUDF.EntityIDENDELSE BEGIN-- create the table from the querySELECT Title, FirstName AS First_Name, MiddleName AS Middle_Name, LastName AS Last_Name, Suffix, Company,JobTitle AS Job_Title, Email, PrimaryPhoneNumber AS Primary_Phone_Number, PrimaryAddress1 AS Primary_Address_1, PrimaryAddress2 AS Primary_Address_2, PrimaryAddress3 AS Primary_Address_3, PrimaryCity AS Primary_City, PrimaryState AS Primary_State, PrimaryZip AS Primary_Zip, PrimaryCountry AS CPrimary_ountry, Notes, Alias, FullName AS Full_Name,dbo.Addresses.Type AS AddressType, dbo.Addresses.Address2 AS Address2,dbo.Addresses.Address3 AS Address3, dbo.Addresses.City AS City, dbo.Addresses.State AS State,dbo.Addresses.Zip as Zipcode, dbo.Addresses.Country AS Country, dbo.Addresses.PhoneNumber AS PhoneNumber,dbo.Addresses.FaxNumber AS FaxNumber, SubAward_Only = CASE SubAwardOnlyWHEN 0 THEN 'No'WHEN 1 THEN 'Yes'END,dbo.ContactsSTUDF.*,IDENTITY(int, 1,1) AS GC_Contact_IDINTO dbo.GC_Contacts_TableFROM dbo.Contacts LEFT OUTER JOIN dbo.ContactAddresses ON dboContacts.ID = dboContactAddresses.ContactIDLEFT OUTER JOIN dbo.Addresses ON dbo.Addresses.ID = dboContactAddresses.AddressIDLEFT OUTER JOIN dbo.ContactsSTUDF ON dbo.Contacts.ID = dbo.ContactsSTUDF.EntityIDEND SET IDENTITY_INSERT GC_Contacts_table OFFSET ARITHABORT ONSET CONCAT_NULL_YIELDS_NULL ONSET QUOTED_IDENTIFIER ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONSET NUMERIC_ROUNDABORT OFF/****** Object: Index [pk_gc_contacts] Script Date: 10/11/2007 15:34:28 ******/CREATE UNIQUE CLUSTERED INDEX [pk_gc_contacts] ON [dbo].[GC_Contacts] ([GC_contact_id] ASC)WITH (SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [PRIMARY]-- add the fulltext indexCREATE FULLTEXT INDEX ON GC_Contacts([Title],[First_Name],[Middle_Name],[Last_Name],[Suffix],[Company],[Job_Title],[Email],[Primary_Phone_Number],[Primary_Address_1],[Primary_Address_2],[Primary_Address_3],[Primary_City],[Primary_State],[CPrimary_ountry],[Notes],[Alias],[Full_Name],[AddressType],[Address1],[Address2],[Address3],[City],[State],[Country],[PhoneNumber],[FaxNumber],[SubAward_Only])KEY INDEX pk_gc_contacts ON GCInquiryCatalogWITH CHANGE_TRACKING AUTOEND
I'm having a problem in using MS SQL 2005 as an ODBC in Powerbuilder 10.
My query which seems to work in Powerbuilder 5 does not work in Powerbuilder 10.
When I execute my query, I got this message "multi-part identifier alias.fieldname could not be bound. I don't know what's seems wrong. I even tried putting no alias but still it won't work..
help me please...
select sc.transaction_code, case when :as_transtype = '' then drh.so_number else case when :as_transtype = 'SI' then drh.si_number else case when :as_transtype = 'DR' then drh.dr_number else :ad_documentnumber end end end document_number, case when :as_transtype = '' then drh.so_date else case when :as_transtype = 'SI' then drh.si_date else case when :as_transtype = 'DR' then drh.dr_date end end end transaction_date, pcd.item_number, pcd.serial_number, pcd.serv_tag, pcd.rev_no, space(10) supplier_name, c.customer_name, pcd.pcc_number, pcd.supplier_refdocno, pcd.ref_date, pcd.original_tag, pcd.item_description from pcc_detail pcd inner join pcc_header pch on pch.pcc_number = pcd.pcc_number inner join delivery_receipt_header drh on pch.so_number = drh.so_number inner join stock_card sc on sc.so_number = drh.so_number and sc.item_number = pcd.item_number inner join customer c on drh.customer_code = c.customer_code where sc.transaction_code in ('DR', 'SE') and sc.transaction_type <> 'RS' and sc.item_number like case when :as_itemnumber = '' then sc.item_number else '%' + :as_itemnumber + '%' end and pcd.serv_tag like case when :as_servicetag = '' then pcd.serv_tag else '%' + :as_servicetag + '%' end and pcd.serial_number like case when :as_serialnumber = '' then pcd.serial_number else '%' + :as_serialnumber + '%' end and pch.customer_name like case when :as_customer = '' then pch.customer_name else '%' + :as_customer + '%' end and :as_transtype in ('SO','SI','DR','PC','') and sc.transaction_code = case when :as_transtype = 'SI' then 'SE' else 'DR' end and ( pch.so_number = case when :ad_documentnumber = 0 then pch.so_number else :ad_documentnumber end or pch.si_number = case when :ad_documentnumber = 0 then pch.si_number else :ad_documentnumber end or pch.pcc_number like case when :ad_documentnumber = '' then pch.pcc_number else '%' + :as_documentnumber + '%' end or pch.dr_number = case when :ad_documentnumber = 0 then pch.dr_number else :ad_documentnumber end ) and pcd.item_description like case when :as_itemdesc = '' then pcd.item_description else '%' + :as_itemdesc + '%' end
this is so stupid and simple and I am annoyed over having to spend so much on this silly simple stuff. I am sure I am just making a silly mistake. I am trying to remove records from one table. The table holds 19000 something records. To determine WHICh records to delete, I have another table that contains the 45 I want to delete. So I wrote this very simple query Delete from tbl_X where tbl_X.FieldA = tbl_Y.FieldA;
The message I get is: Msg 4104, Level 16, State 1, Line 1 The multi-part identifier "tblY.FieldA" could not be bound.
Using - SQL Server 2005 - Management Studio Express.
Here's the SQL statement
Code Snippet
SELECT TOP 1000
[test].[CatalogStudioId],
[test].[CollectionId],
[test].[unique],
[test].[att1]
FROM CatalogStudioEntity.dbo.[test] WHERE [test].[att1] LIKE '%1%'
Now, before you respond, allow me to say that I know using the table name to qualify the columns is redundant, and I know there are other options (such as aliasing the table). Don't respond to tell me this. However -- as far as I know -- this is a valid T-SQL statement and I should be able to get this query to run.
The interesting part is that if management studio is connected to the CatalogStudioEntity database, this query runs fine. If connected to the master database, I get the "multi-part identifier [x] could not be bound" error. The error is listed for every column.
My issue with this is that the table in the FROM clause is qualified with the database name, so whether I'm connected to that database or to "master" should not matter.
I have an application that generates select statements like the one above, and all of the machines so far that we've developed, beta tested and deployed this application on all don't have this problem. It's this one specific installation of SQL Server 2005 on this new machine where this problem arises.
Before I go back and retool the application to output whatever arbitrary syntax this specific machine seems to want, I want to try and troubleshoot and understand why it's acting like this.
Any ideas or thoughts would be greatly appreciated.
INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID = U.FeedID
WHERE M.FeedID = ?
But following error:
[Execute SQL Task] Error: Executing the query " UPDATE Property SET ImageList = U.ImageList FROM Property M INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID = U.FeedID WHERE M.FeedID = ?" failed with the following error: "The multi-part identifier "M.FeedID" could not be bound.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
ByPassPrepare is set to TRUE and ParameterName = 0 to variable User::Feed_ID
HOWEVER - following query executes fine:
UPDATE Property SET
ImageList = U.ImageList
FROM Property M
INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID = U.FeedID
WHERE M.FeedID = 11
Beats me - any help with explaining this to me please?
I was trying to copy child records of one parent record into another, and wanted to report back new child record id and corresponding child record id that was used to create it. I ran into run-time error with OUTPUT clause. Following is a script that will duplicate the situation I ran into:
CREATE TABLE Parent( ParentID INT NOT NULL IDENTITY(1,1) PRIMARY KEY, ParentName VARCHAR(50) NOT NULL) GO
CREATE TABLE Child( ChildID INT NOT NULL IDENTITY(1,1) PRIMARY KEY, ParentID INT NOT NULL REFERENCES Parent(ParentID), ChildName VARCHAR(50) NOT NULL) GO
INSERT INTO Parent(ParentName) VALUES('Parent 1') INSERT INTO Parent(ParentName) VALUES('Parent 2') GO
INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 1') INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 2') GO
At this stage, there Child table looks like:
ChildID
ParentID
ChildName
1
1
Child 1
2
1
Child 2
What I want to do is copy Parent 1€™s children to Parent 2, and report back which source ChildID that was used to create the new child records. So I wrote the query:
Hi Everyone This is the query and I am getting follwoing error message
"The multi-part identifier "InvDate.Account Reference" could not be bound."
SELECT MAX([DATE NOTE ADDED]) AS LASTDATE, CC.[COMPANY], CC.[ACCOUNT REFERENCE], INVDATE.[LASTORDERDATE] FROM CUSTOMERCONTACTNOTES AS CCN, (SELECT * FROM CUSTOMER) AS CC, (SELECT MAX([INVOICE DATE]) AS LASTORDERDATE, [ACCOUNT REFERENCE] FROM INVOICEDATA GROUP BY [ACCOUNT REFERENCE]) AS INVDATE WHERE CCN.[COMPANY] = CC.[COMPANY] AND CC.[ACCOUNT REFERENCE] COLLATE SQL_LATIN1_GENERAL_CP1_CI_AS IN (SELECT DISTINCT ([ACCOUNT REFERENCE]) FROM INVOICEDATA) AND CC.[ACCOUNT REFERENCE] COLLATE SQL_LATIN1_GENERAL_CP1_CI_AS = INVDATE.[ACCOUNT REFERENCE] GROUP BY CC.[COMPANY],CC.[ACCOUNT REFERENCE] ORDER BY CC.COMPANY ASC
By the way its SQL Server 2005 Environment. Mitesh
I'm a newbie have trouble using the "inserted" table in a trigger. When I run these SQL statements:CREATE DATABASE foobarGOUSE foobar GOCREATE TABLE foo ( fooID int IDENTITY (1, 1) NOT NULL, lastUpdated datetime, lastValue int, PRIMARY KEY(fooID))GOCREATE TABLE bar ( barID int IDENTITY (1, 1) NOT NULL, fooID int NOT NULL, [value] int NOT NULL, updated datetime NOT NULL DEFAULT (getdate()), primary key(barID), foreign key(fooID) references foo (fooID))GOCREATE TRIGGER onInsertBarUpdateFoo ON Bar FOR INSERTAS UPDATE Foo SET lastUpdated = inserted.updated, lastValue = inserted.[Value] WHERE foo.fooID = inserted.fooIDGO
I get the error message:
Msg 4104, Level 16, State 1, Procedure onInsertBarUpdateFoo, Line 4 The multi-part identifier "inserted.fooID" could not be bound.
I can get the trigger to work fine as long as I don't reference "inserted".
What am I missing?
I'm using Microsoft SQL Server Management Studio Express 9.00.2047.00 and SQL Express 9.0.1399
Is it possible to reference a temporary global tale (##table) of a linked server using the 4 parts "identifier": linkedserver.database.schema_name.##object_name ?? Thanks in advance for your help.
Hi: I'm try to create a stored procedure where I sum the amounts in an invoice and then store that summed amount in the Invoice record. My attempts at this have been me with the error "The multi-part identifier "items.TAX" could not be bound"Any help at correcting my procedure would be greatly appreciate. Regards,Roger Swetnam ALTER PROCEDURE [dbo].[UpdateInvoiceSummary] @Invoice_ID intAS DECLARE @Amount intBEGIN SELECT Invoice_ID, SUM(Rate * Quantity) AS Amount, SUM(PST) AS TAX FROM InvoiceItems AS items GROUP BY Invoice_ID HAVING (Invoice_ID = @Invoice_ID) Update Invoices SET Amount = items.Amount WHERE Invoice_ID =@Invoice_IDEND
Before you ask, yes I know this is a common-ish error message and I have been searching around for a bit for solutions. The problem is, however, is that the query I'm trying to run is so incredibly simple that those solutions don't really apply...
Here's the SQL:
select top 1000 [test].[CatalogStudioId], [test].[CollectionId], [test].[unique], [test].[att1] from CatalogStudioEntity.dbo.[test] where [test].[att1] like '%1%'
And apparently none of those columns can be bound.
Queries of this general syntax have worked on SQL Server 2005 installations I've been working on until now, so what could possibly be screwy with this specific installation where that query doesn't work?
And yes, I know using the table name to qualify the columns is redundant and I know there are other options (such as using aliases), but I'd rather try to troubleshoot this before reworking the code that generates these sql queries.
I am wanting to get the job name based on sys.sysProcesses.[Program_name] column. Why is this query not returning any results even though the 2nd substringed guids are found the the sysJobs table?
SELECTCASE WHEN RTRIM([program_name]) LIKE 'SQLAgent - TSQL JobStep (Job %' THEN J.Name ELSE RTRIM([program_name]) END ProgramName , Val1.UqID , Val1.UqIDStr
I've got a linked server to an attomix database. When i send an erroneous statements to the server an error message is returned to the Message pane is SSMS as below:-
OLE DB provider "MSDASQL" for linked server "noble" returned message "[Noble Systems Corp.][ATOMIX ODBC Driver]Atomix error - (-217)Column (crap) not found in any table in the query.
".Msg 7215, Level 17, State 1, Line 5, Could not execute statement on remote server 'noble'.
I'm trying to store this error using the ERROR_MESSAGE() function but i only get the second statement ('Could not execute statement on remote server 'noble'.') rather than the real error in the first line. The first line statement is displayed in black as a message rather than red for an error.
