T-SQL (SS2K8) :: Call Stored Procedure With 3 Parameters
Apr 16, 2014
In t-sql 2008 r2 I need execute a stored procedure called StudentData and pass 3 parameter values to the stored procedure. The stored procedure will then return 5 values that are needed for the main sql. My problem is I do not know how to have the t-sql call the stored procedure with the 3 parameter values and pass back the 5 different unique data values that I am looking for.
The basic dataset is the following:
SELECT SchoolNumber,
SchoolName,
StudentNumber,
from [Trans].[dbo].[Student]
order by SchoolNumber,
SchoolName,
StudentNumber
I basically want to pass the 3 parameters of SchoolNumber, SchoolName, and StudentNumber to the stored procedure called StudentData from the data I obtain from the [Trans].[dbo].[Student]. The 3 parameter values will be obtained from the sql listed above.
The columns that I need from the stored procedure called StudentData will return the following data columns
that I need for the report: StudnentName, StudentAddress, Studentbirthdate, StudentPhoneNumber, GuardianName.
Thus can you show me how to setup the sql to meet this requirement I have?
View 2 Replies
ADVERTISEMENT
Apr 17, 2014
I have a few questions about the following t-sql 2008 r2 sql code listed below that is calling a stored procedure:
DECLARE@return_value int,
@endYear SMALLINT = 2014,
@CustomerID INT = '9999',
@Schedules CHAR(1) = N'C'
EXEC [dbo].[sproom] @endYear
,@CustomerID
,@Schedules
The sql listed above does execute the stored procedure called [dbo].[sproom] successfully and returns all the data all the rows from the stored procedure multiple times. However can you tell me the following:
1. How can I have the stored procedure return distinct rows?
2. I want the stored procedure to return selected columns. I tried using the OUTPUT parameter for some of the columns, but I got the error message, "Procedure or function spHomeroom has too many arguments specified.".
when I change the sql above to:
DECLARE @return_value int,
@endYear SMALLINT = 2014,
@CustomerID INT = '9999',
@Schedules CHAR(1) = N'C',
@CustName varchar(50)
EXEC [dbo].[sproom] @endYear
,@CustomerID
,@Schedules
,@CustName
That is when I get the error message.
A solution might be to change the stored procedure, but I would prefer not to since this is a generic stored procedure that I believe a lot of t-sqls and stored procedures will use.
View 3 Replies
View Related
Jun 2, 2014
I have various ways of getting the parameters of a stored procedure:
I have a procedure that has all defaults 4 are null and 2 are 0.
The following shows most of what I need but no defaults
SELECT PARAMETER_NAME ,
ORDINAL_POSITION ,
DATA_TYPE ,
CHARACTER_MAXIMUM_LENGTH ,
CHARACTER_OCTET_LENGTH ,
NUMERIC_PRECISION ,
[Code] ...
This one has two values:
PARAMETER_HASDEFAULT (always 0) and PARAMETER_DEFAULT (always 0)
sp_procedure_params_rowset proc procedure
Is there something else that would tell me if there is a default on a parameter and what the default is if there is one.
View 2 Replies
View Related
Jun 26, 2014
I currently have a process that has a cursor. It takes data and executes a stored procedure with parameters.
declare @tmpmsg varchar(max)
declare @tmpmsgprefix varchar(max)
declare @cms varchar(20)
create table #tmpIntegrity(matternum varchar(10),ClientName varchar(20))
insert into #tmpIntegrity(matternum,ClientName)
[Code] ....
Output from code:
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4,
The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,
The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,
The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Desired output (no trailing comma):
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4
The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3
The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3
The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Next, how do I call the stored procedure without doing it RBAR? Is that possible?
execute usp_IMessage 832,101,@tmpmsgprefix,@tmpmsg,','
View 5 Replies
View Related
May 21, 2014
Can we Pass table valued parameters and normal params like integer,varchar etc..to a single stored procedure?
View 1 Replies
View Related
Mar 28, 2007
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
View 9 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Mar 12, 2008
Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
View 29 Replies
View Related
Aug 29, 2007
I have a stored procedure I created in SQL server 2005. Now I need to call the stored procedure in C#. Can someone help me out here? What is the C# code I need to call this stored procedure? I have never done this before and need some help.
CREATE PROCEDURE [dbo].[MarketCreate]
( @MarketCode nvarchar(20), @MarketName nvarchar(100), @LastUpdateDate nvarchar(2),)
ASINSERT INTO Market( MarketCode MarketName LastUpdateDate)VALUES( @MarketCode @MarketName @LastUpdateDate
)
View 5 Replies
View Related
Mar 31, 2006
I have created a stored procedure only with an insert statement in sql server 2005.
How can i call this stored procedure through code in ASP.NET page using vb.
i want to pass one parameter that comes from a text box in asp.net page.
my emailid is: g12garg@yahoo.co.in pls reply.
Thank you
Gaurav
View 2 Replies
View Related
Aug 7, 2001
Does anyone give me syntax for adding a bcp script within a stored procedure..I had done it once 3 yrs back does'nt seem to work now, and I do not know where I am going wrong??
Thanks
View 2 Replies
View Related
Aug 7, 2001
Hi, If I have a dll file and I know the interface of that dll file. How can I use stored procedure to call this dll file? Thank you.
View 1 Replies
View Related
Aug 7, 2001
Hi, If I have a dll file and I know the interface of that dll file. How can I use stored procedure to call this dll file? Thank you.
View 2 Replies
View Related
Nov 9, 2005
Greetings,
Even though this may be not right place with this issue I would like to try!
I facing with the problem “Object Variable or With Block variable not set” while I am trying to execute the stored procedure from Ms. Access form.
I need some help very badly or maybe a good sample of code that works in this issue is very welcome.
Many thanks in Advance
View 1 Replies
View Related
Jul 4, 2006
hi,
i created a stored procedure and below is the code segment of it;
create Procedure test1
@price as varchar(50) output,
@table as varchar(50) = ''
AS
Declare @SQL_INS VarChar(1000)
SELECT @SQL_INS = 'select ['+@price+'] from ['+@table+']'
Exec (@SQL_INS)
Procedure gets 2 parameters, one of them is just INPUT parameter and the other one is both OUTPUT and INPUT. What i wanna do is to get the result set of this procedure to use in my application.
View 5 Replies
View Related
Dec 11, 2007
Hi, i wanna know if we can call a stored procedure from another one. If yes, what's the syntax?
Thanks
View 3 Replies
View Related
Oct 6, 2007
Respected Sir/MAm
i am working on VC++ (visual studio2005 with sql200).i have created one stored procedure to insert data into table.
i want to call this strd procedure in the VC++ main.cpp file....
Could you please help me for the correct syntax code with example.
Thank You.
Upali
View 4 Replies
View Related
Apr 7, 2008
Hi there. My problem is: I have two stored procedures.
1. SELECT A FROM B
2. SELECT C FROM D WHERE A = EXEC First procedure
The meaning: First procedure gets some Id from B table. The second one gets a DataSet by this Id number. The problem is that when I getting an Id from first proc I use SELECT, than in the second one I use EXEC, and in the end, seconf procedure returns two DataSets. The first contains an Id from first procedure, second contains a valid DataSet. Therefore my application falls because it suppose that valid data in first DataSet. Hoow can I call to stored procedure from another stored procedure without creating two DataSets?
P.S. I already tried to use return instead of select in the first procedure. Same result.
Thank you
View 8 Replies
View Related
Sep 15, 2014
Consider a situation where a stored procedure taking a varbinary(max) (BLOB) input parameter then calls a nested stored procedure and passes along that varbinary(max) as an input parameter to the nested stored procedure.
Is a copy of the BLOB provided to the nested stored procedure (passed by value) OR is the BLOB passed by reference.
My interest is in understanding the potential memory hit when handling large BLOBs in this environment.
For example, if the BLOB is 200MB, will SQL server need to allocate memory for a new copy each time it's passed to another stored procedure?
Looks like table type parameters are passed by reference, but I haven't been able to find any info on BLOBS in this context.
View 8 Replies
View Related
Jul 10, 2006
Hi,
I would like to trigger a DTS or a stored procedure from asp.net 1.1 BUT
I don't want to wait for it to finish. In fact the DTS/Storeproc calculates values into different tables.
Those values are not needed immediately. The calculation takes between 20 or 30 minutes.
Do you have any idea how to do it ?
Thanks
View 3 Replies
View Related
Oct 26, 2006
I have gridview display a list of users. I have added a column for a check box. If the box is checked I move the users to another table.I need to pass some parameter of or each row to a stored proc. My question. In the loop where I check if the checkbox is selected I need to call the stored procedure.Currently I do an open and closed inside the loop.What is best and most effficent method of doing this should I open and close the connection outside the loop and change the procs parameters as loop through. System.Data.SqlClient.SqlConnection conn =
new System.Data.SqlClient.SqlConnection(
System.Configuration.ConfigurationManager.ConnectionStrings["connString"].ConnectionString);
System.Data.SqlClient.SqlCommand commChk = new System.Data.SqlClient.SqlCommand("storedProc", conn);
commChk.CommandType = System.Data.CommandType.StoredProcedure;
commChk.Parameters.AddWithValue("@mUID", ddMainUser.SelectedValue.ToString());
commChk.Parameters.AddWithValue("@sUId", gvUsers.Rows[i].Cells[2].Text);
commChk.Connection.Open();
commChk.ExecuteNonQuery();
conn.Close(); If so exactly how do I do this? How do I reset the parmaters for the proc? I haven't done this before where I need to loop through passing parameter to the same proc. thanks
View 2 Replies
View Related
Jan 19, 2007
Hi All,
I'll admit that I'm not the greatest at stored procedure/functions but I want to learn as much as possible. So I have two questions:
1) I had VS2005 autogenerate a sqldatasource that created Select/Insert/Update stored procedures. When Updating a record and calling the stored procedure, I want to query another table (we'll call it tblBatchNo) that has only one record, Batchno. I want to put that current batchno into the Update statement and update the record with the current batchno. Can someone point me in the right direction? Remember that I'm still a beginner on this subject.
2) Can someone provide any links to online tutorials on t-sql?
Thanks in advance.
Curtis
View 2 Replies
View Related
Feb 13, 2007
Dear Masters;
How can I call a stored procedure with VB code?
Thanks
View 2 Replies
View Related
Nov 12, 2007
Hi.....I have problem and I need your helpI stored a procedure in the Projects Folder in my computerand I want to return the procedure result in a column inside tableHow I can do that?????????thank you
View 2 Replies
View Related
Feb 15, 2000
Can DTS make a call to a stored procedure on an AS/400 and accept data from that call. I need to access the AS/400 through OLE/DB for AS/400, execute the call to a stored procedure (the AS/400 stored procedure gets the data from DB2/400, executes some business logic, then presents the record set), and grab the record set returned and dump it into a SQL 7.0 table.
View 1 Replies
View Related
Feb 20, 2003
I'm using the sp_OAMethod method to call a method called "getDesc" from within a VB .dll I created. Within the .dll file, the method is called "getDesc()", but for some reason I'm getting an error saying it is an unknown name. I am able to create the object without errors, so I know the .dll is correctly registered and is being found by the server. Any idea what would cause this error when I know the method name is correct? The code I use is below (without error handling to make it shorter):
-- Decalre variables
DECLARE @object INT
DECLARE @hr INT
DECLARE @property VARCHAR(255)
DECLARE @return VARCHAR(255)
DECLARE @src VARCHAR(255)
DECLARE @desc VARCHAR(255)
-- Create object
EXEC @hr = sp_OACreate 'SQLActiveXTest.SQLActiveXTestClass', @object OUT
-- Call method
EXEC @hr = sp_OAMethod @object, 'getDesc', @return OUT
-- Destroy object
EXEC @hr = sp_OADestroy @object
View 1 Replies
View Related
Jan 31, 2006
Hello;
I am using an Access 2003 front-end, and an SQL backend to run my application. I have a pretty good handle on using stored procedures and assigning variables for criteria within the SPROC.
I am however having a problem when I try to use a variable in place of a named procedure. For example I have a function that runs 2 procedures, therefore I "Call" the function with the code that runs my procedure, and simply change the name of the SPROC with each call. My problem is that I cannot figure out the syntax to use a variable for the named procedure. My code always errors on the line "objConn.MySProc MyCalendar, objRs" because MySproc is of course not a named procedure.
So how do I refer to a procedures name using a variable?
Here's my code;
Function LieuBen()
MyCalendar = CurrTSCalendar
Call PopulateTmpFile("sp_DelTmpProctimesheetCalc")
Call PopulateTmpFile("sp_PopTmpCalcLieuBen")
End Function
Function PopulateTmpFile(MySProc As Variant)
Dim sp_PopulateTempOTTable As String
Const DS = "SOS-1"
Const db = "TIMS"
Const DP = "SQLOLEDB"
Dim objConn As New ADODB.Connection
Dim objRs As New ADODB.Recordset
Dim objComm As New ADODB.Command
ConnectionString = "Provider=" & DP & _
";Data Source=" & DS & _
";Initial Catalog=" & db & _
";Integrated Security=SSPI;"
' Connect to the data source.
objConn.Open ConnectionString
' Set a stored procedure
objComm.CommandText = MySProc
objComm.CommandType = adCmdStoredProc
Set objComm.ActiveConnection = objConn
objConn.MySProc MyCalendar, objRs
objConn.Close
Set objRs = Nothing
Set objConn = Nothing
Set objComm = Nothing
End Function
View 1 Replies
View Related
Sep 7, 2006
Hello all,
does anyone know if it's possible to call a stored procedure from a view.
Thnx,
Patrick
View 9 Replies
View Related
Sep 12, 2012
How to call a sql function in stored procedure using Sqlserver 2008?
View 4 Replies
View Related
Jul 18, 2014
I have created a DTS package which stores file data into Database table.
I want to pass file name dynamically to stored procedure from which DTS retrieve data and store it in table.
View 3 Replies
View Related
Nov 12, 2007
Hi.....
I have problem and I need your help
I stored a procedure in the Projects Folder in my computer
and I want to return the procedure result in a column inside table
How I can do that?????????
thank you
View 7 Replies
View Related
Jul 20, 2005
Hi All,I have a stored procedure.I need to create a scheduled job using that stored procedure.I went to Enterprise Manager -->Management--> Jobs-->New JobPropertiesIn the step tab, I can select db and put the codes.Instead of writing the code there, I want to call the stored procedurein the command box.How can I do that?System: MS SQL Server 2000I would highly appreciate your help.Thanks a million in advance.Best regards,mamun
View 1 Replies
View Related
Jul 20, 2005
HelloI am calling a stored procedure in a MSDE/SQLServer DB form within myVisual C++ 6.0 program along the linesCCommand<CAccessor<CdboMyAccessor>>::Open(m_session, NULL);WithDEFINE_COMMAND(CdboMyAccessor, _T("{ CALL dbo.MyProc; 1(?,?) }"))It all works sweet as, but it can take a while and I want to let theuser abort it.Everything I've tried ends in tears.
View 6 Replies
View Related
