We have a table setup to track changes that are made to another table, for auditing purposes. How do we compare the most recent record in the change table with the previous record in the change table? Particularly, we have a column named DUE_DATE in the change table and want to identify when the most recent change has a different DUE_DATE than the previous change made.
View 8 RepliesI have the following recordset:
cmdBatchNbPdsLbsZONE
817159644 1.55320031
817159652 9.09590031
817159679 2.5891806
817159687 5.7123006
817159709 2.3903006
817159733 2.2792006
817159741 2.0647007
817159768 1.2430007
817159784 4.1547006
817159792 3.56576013
I need to extract the corresponding price from the following table:
Zone MaxWeight Price
---------------------- ---------------------------------------
31 1.70 7.14
31 2.20 8.76
31 3.30 9.47
31 4.40 9.69
31 5.50 10.61
31 6.60 11.05
31 7.70 11.49
31 8.80 11.93
31 9.90 12.37
31 11.00 12.81
31 12.10 13.23
In this case, the 2 first rows should give a price of
1) 7.14 (weight between 0 - 1.70)
2) 11.93 (weight between 8.80 - 9.90)
How can I do that with a query?
I am fairly new to SQL and writing queries so bear with my faults. I am learning on the job, which is good and bad. Below is a query that I have written to obtain some information. The problem arises when we have a patient who goes from Patient Type '1' to Patient Type '2'. This needs to be considered a singular visit and the only way I can think that this may work is if: for any specific medical record a dsch_ts is equal to the Admit TS on the next row.
How to complete something like this and my google searches have been fruitless. I attached a spreadsheet with an example of what I am getting.
SELECT DISTINCT
TPM300_PAT_VISIT.med_rec_no,
TSM040_PERSON_HDR.lst_nm AS 'Last Name',
TSM040_PERSON_HDR.fst_nm AS 'First Name',
[Code] ....
I need to compare the next row with the previous row of same table and produce nonidentical column.for eg... say my table has
Row 1 => 1001 Abhas 120 150 180
Row 2 => 1001 Abhas 150 150 180
then my output would be as below:
StudId Name fee1 fee2 fee3
1001 120
1001 Abhas 150 150 150
i.e in first row of resultset, i want to show only those values which are changed alongwith studID and next row should display all values.
I have two tables I am trying to compare as I have created a new procedure to replace an old one and want to check if the new procedure produces similar results.
The problem is that when I run my compare I get false matches. Example:
CREATE TABLE #ABC (Acct VARCHAR(10), Que INT);
INSERT INTO #ABC VALUES
('2310947',110),
('2310947',245);
[Code] ....
Which gives me two records when I really do not want any as the tables are identical.
--drop table #temp
create table #temp (id int, idvalue int)
insert into #temp(id,idvalue)
select 1095,75
[code]...
I need to take the id value from maximum's id, and compare the rest id value from the table. i need to check the diffrence , if diffrence is more than 18, then i need to raise the flag as failure otherwise the whole test is success. i need to take 63 and compare rest 69,65,61,75.check the diffrence less than 18 or not.
i would like to see the 2014-06 matched results (3rd query), if the same ssn and acctno is exist in 2012-06 and 2013-06 and 2014-06 then eliminate from results, otherwise show it
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2012-06'
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2013-06'
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2014-06'
i have written the below query but it shows only matched across three queries, but i want to display / delete from 2014-06 records if the ssn and acctno is exist in 2012-06 and 2013-06
select c.* from (
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2012-06' ) a join
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2013-06' ) b on a.SSN = b.SSN and a.acctno = b.acctno join
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2014-06' ) C on a.SSN = c.SSN and a.acctno = c.acctno join
)
I have the following information in a table. What I would like to do is pull out all the visits for each customer that are less than 30 days apart.
Customer# VisitDate
9082012-07-28 00:00:00.000
9082013-09-20 00:00:00.000
9082013-12-23 00:00:00.000
9082014-01-10 00:00:00.000
9082014-01-27 00:00:00.000
9082014-02-16 00:00:00.000
9082014-05-21 00:00:00.000
9082014-05-30 00:00:00.000
9082014-10-01 00:00:00.000
9082015-02-28 00:00:00.000
9082015-03-22 00:00:00.000
9272012-02-16 00:00:00.000
9272014-12-14 00:00:00.000
9272014-12-23 00:00:00.000
What I want is to divide the row value for 'OB Dial Attempts' by the row value for '# Ready To Work Inventory', both in the same table.The code below will work, however I think there is a flaw in my logic. The actual table only has one row per category (MatrixCat) and will always have only one row per category.
CREATE TABLE #NumVals (MatrixCat VARCHAR(100), MatrixVal VARCHAR(100));
INSERT INTO #NumVals (MatrixCat, MatrixVal) VALUES
('# Ready To Work Inventory','606'),
('OB Dial Attempts','255');
[code]....
I want to return all rows in table giftregistryitems with an additional column that holds the sum of column `amount` in table giftregistrypurchases for the respective item in table giftregistryitems.
What I tried, but what returns NULL for purchasedamount, where I want purchasedamount to be the sum of the `amount` for THAT item, based on giftregistrypurchases.itemid=giftregistryitems.id:
SELECT (SELECT SUM(amount) from giftregistrypurchases gps where registryid=gi.registryid AND gp.itemid=gps.itemid) as purchasedamount,*
FROM giftregistryitems gi
LEFT JOIN giftregistrypurchases gp on gp.registryid=gi.id
WHERE gi.registryid=2
How can I achieve what I need?
Here's my table definition and data:
USE [tt]
GO
/****** Object: Table [dbo].[giftregistry] Script Date: 09-05-15 11:15:18 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[giftregistry](
[id] [int] IDENTITY(1,1) NOT NULL,
[code]....
Desired results:
purchasedamountidregistryidtitleogimgdescriptionURLamountpricecreatedate
[URL]
I have a table with this info:
NrCard numberPersonAuto123456789101112
11111111111111111111User1VW Jetta6,46,46,46,45,825,825,825,825,825,825,826,4
22222222222222222222User2Honda CR-V 13,2113,2113,2112,0112,0112,0112,0112,0112,0112,0113,2113,21
How I can get this result:
NrCard numberPersonAutomonthvalue
11111111111111111111User1VW Jetta16,4
11111111111111111111User1VW Jetta26,4
11111111111111111111User1VW Jetta36,4
11111111111111111111User1VW Jetta45,82
11111111111111111111User1VW Jetta55,82
11111111111111111111User1VW Jetta65,82
[code]....
Should I use unpivot or pivot?
Is it possible to show the number of rows and the range for each partition in a table ?
This shows me the range but not the row count per partition
SELECT sprv.value AS [Value], sprv.boundary_id AS [ID] FROM sys.partition_functions AS spf
INNER JOIN sys.partition_range_values sprv
ON sprv.function_id=spf.function_id
WHERE (spf.name=N'myDateRangePF')
ORDER BY [ID] ASC
I have a job below, which takes the results and send to the users in email.But I have a question, how can I send only one email with all rows, not to send the for every row on table separated email.
DECLARE @Body VARCHAR(MAX)
DECLARE @StartDate DATETIME
DECLARE @EndDate DATETIME
DECLARE @RowCountINT
DECLARE@idINT
declare@departmentnvarchar(30)
[code]....
how to track how many rows updated or deleted per day in a single table and load the information in another table .
View 7 Replies View RelatedI have around 3 tables having around 20 to 30gb of data. My table A related to table B by a FK and same way table B related to table C by FK. I would like to delete all rows satisfying certain condition from table A and all corresponding related records from table B and C. I have created a query to delete the grandchild first, followed by child table and finally parent. I have used inner join in my delete query. As you all know, inner join delete operations, are going to be extremely resource Intensive especially on bigger tables.
What is the best approach to delete all these rows? There are many constraints, triggers on these tables. Also, there might be some FK relations to other tables as well.
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
Table MediaImportLog
column ↘ImportIndex ImportFileTime ImportSource
value ↘80507 20060506001100 815
80511 20061109120011 CRD � P.S the values type of ImportFileTime 20060506001100 → 2006 -year 05-month 06-day 00-HH 11-minute 00-second】
Table BillerChain
column↘BillerInfoCode ChainCode
value ↘750 815
value ↘81162 CRD
Table Biller
column↘CompanyCode BillerCode
value ↘999 750
value ↘81162 516
TAble DataBackup
column↘CompanyCode Keepmonth
value ↘999 6
value ↘81162 12
---------------------------------------------------
when I'm in MediaImportLog , I want use column ImportSource to compare with column ChainCode in table BillerChain ( so I get BillerInfoCode) and then use the BillerInfoCode I got to compare with column BillerCode in Table Bill ( I get CompanyCode) finally I use CompanyCode to compare with column CompanyCode in table DataBackup so I can get the company's keepmonth
How can I get the keepmonth? can I use parameters ?
thank you very much
I need to have a script where it ask the user for a value, the script will search for all records that match the value. Then it will display the numbers of records found and ask the user to enter a different value. The rest of the script will use this new value and increment by 1 n times as the number of records found. I started the script where it will ask for "HANDLE" and display the number of records found with that "HANDLE"
declare @HANDLE as varchar(30)
declare @COUNT as varchar(10)
declare @STARTINV as varchar(20)
set @HANDLE = ?C --This is the parameter to search for records with this value
set @STARTINV = ?C --User will input the starting invoice number
SELECT COUNT as OrderCount FROM SHIPHIST
where HANDLE = @HANDLE
I just can't figure out how to proceed to use the entered invoice # and increment by 1 until it reach the number of records found.
This will be the end results:
Count=5 --results from query
STARTINV=00010 --Value entered by user
Handle,Inv_Num
AAABBB,00010
AAABBB,00011
AAABBB,00012
AAABBB,00013
AAABBB,00014
There are four tables
1. Matter
MID, CID, RType
001, a, m
002, a, m
003, b, m
004, c, m
2. Category
CID. RType
a, T
b, T
c, T
3. Security assignmnet
RID, RType, GID
001, m, g01
002, m, g01
002, m, g02
002, m, g03
003, m, g01
003, m, g03
a, T, g01
a, T, g02
a, T, g03
b, T, g02
b, T, g03
b, T, g04
4. Group
GID
g01
g02
g03
g04
I'd like to find the record in table #1 "Matter" which has exact record of "GID" in table #3 "Security Assignment" compare with table #2 "Category"
In this case, it is record of "002" bacause "002" in table#1 "Matter" and the record "a" in table #2 "category" both has exact GID records(g01, g02, g03) in table #3, "Security Assignment"
How can I create qury to find all the possible record in the table #2?
I am having below two tables:
1) TableA : Which contains 5 columns(Column1,..........Column5)
2)TableB : Which contains 10 columns(Column1,..........Column10)
TableB contains millions of data.Now I want select all 5 columns from tableA but combination of Column1,Column2,Column3 if present in tableB, then i want exclude that records.I am doing as below:
select * from TableA a join TableB b a.column1!=b.column1 and a.column2!=b.column2 and a.column3!=b.column3 )
But query is taking almost 5 minutes. Is there is another approach?
I am having a table which contains data of students like:
StudentID,StudentName,Term,RESult.
Sample data :
StudentID,StudentName,Term,RESult.
1,ABC,Term1,Pass
1,ABC,Term2,Fail
1,ABC,Term3,Pass
1,ABC,Term4,Pass
1,ABC,Term5,Pass
Now i want to compare Result and dislay prevterm where student fail:
Now my output would be as: Now I want to compare latest term i.e. Term5 with prev Terms and if found Mismatch in result then i want to display as below:
studentID PrevFailTerm, CurrentTerm
1,Term2,Term5
I am asked to compare the address fields (three columns of nvarchar(100) ) of a customer database (around 10,000 records) and find any duplicates. If it is a character by character match, I could have just GROUPed and get the result.
But, I am expected to produce a list with similar addresses which the guys who entered may have use slightly different spelling or more or less characters, or a "." here and there.
is there any way to create a query for this?
I want to compare ONLY 1 Column values from 2 tables having more than 4.9 million records. There is a difference of 4000 rows between the 2 tables.
SELECT ID From TABLE1 where ID not in (SELECT DISTINCT ID From TABLE2)
My above query took nearly 4.5 hours to run and I had to cancel it. Is there a better way to write the query . I just want to compare the ID - column values which are missing in TABLE2
I want to display records from @table1 only when combination of col2,col3 and col4 are present in @table2.In Below case I want output as: below two records only.
'test1', 'need this record', 25, {d '1901-01-01'}
'test3', 'some longer value', 23, {d '1900-01-01'}
declare @table1 table (
col1 varchar(10) not null,
col2 varchar(200) null,
col3 int not null,
[code]....
Table 1 has "Gender" field with "Male" and "Female" in it, table 2 has "Gender" field with "M" and "F" in it. a query to compare data and list the differences.
View 4 Replies View RelatedI managed to transpose rows into columns.
;WITH
ctePreAgg AS
(
select top 500 act_reference "ActivityRef",
row_number() over (partition by act_reference order by act_reference) as rowno,
t3.s_initials "Initials"
from mytablestuff
order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
ref, initials
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
ref, init1,init2
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
-- My first Data
create table #myfirst (id int, city varchar(20))
insert into #myfirst values (500,'Newyork')
insert into #myfirst values (100,'Ediosn')
insert into #myfirst values (200,'Atlanta')
insert into #myfirst values (300,'Greenwoods')
insert into #myfirst values (400,'Hitchcok')
insert into #myfirst values (700,'Walmart')
insert into #myfirst values (800,'Madida')
-- My Second Data
create table #mySecond (id int, city varchar(20),Sector varchar(2))
insert into #mySecond values (1500,'Newyork','MK')
insert into #mySecond values (5500,'Ediosn','HH')
insert into #mySecond values (5060,'The Atlanta','JK')
insert into #mySecond values (7500,'The Greenwoods','DF')
insert into #mySecond values (9500,'Metro','KK')
insert into #mySecond values (3300,'Kilapr','MK')
insert into #mySecond values (9500,'Metro','NH')
--Third Second Data
create table #myThird (id int, city varchar(20),Sector varchar(2))
insert into #myThird values (33,'Walmart','PP')
insert into #myThird values (20,'Ediosn','DD')
select f.*,s.Sector from #myfirst f join #mySecond s on f.city = s.city
/*
idcitySector
500NewyorkMK
100EdiosnHH
*/
i have doubt on two things
1) How Can i compare the City names, by eliminating 'The ' at the beginning (if there is any in second tale city) between first and second
2) after comparing first and second if there is no match found in second them want to compare with third table values for those not found
--i tried below to solve first doubt, it is working but want to know any other wasys to do it
select f.*,s.Sector from #myfirst f join #mySecond s on replace (f.city, 'THE ','')= replace (s.city, 'THE ','')
--Expected results wull be
create table #ExpectResults (id int, city varchar(20),Sector varchar(2))
insert into #ExpectResults values (200,'Atlanta','JK')
insert into #ExpectResults values (100,'Ediosn','HH')
insert into #ExpectResults values (300,'Greenwoods','DF')
insert into #ExpectResults values (500,'Newyork','MK')
insert into #ExpectResults values (700, 'Walmart','PP')
insert into #ExpectResults values (800, 'Madidar','')
[code]....
I have 3 tables...
JobRequirements (A)
JobID int
QualificationTypeID int
EmployeeQualifications (B)
EmployeeID int
QualificationTypeID int
Employee (C)
EmployeeID int
EmployeeName int
I need to return a list of all employees fit for a specific job ... The criteria is that only employees who have all the JobRequirements are returned. So if a job had 3 requirements and the employee had just 2 of those qualifications, they would not be returned. Likewise, the employee might have more qualifications than the job requires, but unless the employee has all the specific qualifications the job requires they are not included. If an employee has all the job qualifications plus they have extra qualifications then they should be returned...
How to only return those records where all the child records are present in the other table..
I need to compare two tables in each row. the tables are as follows:-
Table a:
Code:
IDFirst_Name Last_name Birthdate
1Shradha Deshkmukh 1981-12-25 00:00:00
2Shradha Verma 1981-05-11 00:00:00
3Divya Dutta 1982-07-21 00:00:00
4Matthew Palmer 1983-12-28 00:00:00
table d:-
Code:
idfnlndob
1ShradhaTiwari1981-12-25 00:00:00
2DivyaDutta1983-07-21 00:00:00
3SulabhManesar1975-09-11 00:00:00
4MatthewPalmer1983-12-28 00:00:00
5SamuelMaxwell1984-05-22 00:00:00
I want to compare the tables using first name, and I have a log variable which I want to have the value as per the differences in the table that is if the first name matches and second name and dob dont match it shows log value for that FN as 'LN and DOB dont match'.
similarly if First name matches and dob matches then @log is 'LN not match'.
And in case all three match it should show 'match'as log value.The query I use is a s follows:-
Code:
USE testing
GO
DECLARE @NR int
DECLARE @log varchar(200)
SELECT @NR = COUNT(*) FROM a
WHILE @NR>0
[code]...
the result I am getting is :-
Code:
fnlndob (No column name)
ShradhaTiwari1981-12-25 00:00:00match
ShradhaTiwari1981-12-25 00:00:00match
DivyaDutta1983-07-21 00:00:00match
MatthewPalmer1983-12-28 00:00:00match
I have tried using CASE but that doesnt work either.
i have two tables. 1st table gets the information from as400, then moves the data to table 2 at sql 2000 server. I need to see when as400 updateschanges or inserts new information to table 1 how to updatechange or insert into table 2?
View 4 Replies View RelatedHi
i have this variable called order1 in the table called datetable and i want to display out the duplicate orders in sql. how do i do that? do i need to use group by ?
thanks in advance.! any help?
well i actually get the answers by doin this...
select order1 from datetable group by order1 having count(*) > 1
however now i want to compare the values date1 in the first duplicate orders to the second duplicate order...like compare aaaa of the first row and aaaa of the second row ...how to do that? i need to compare the date1 in minutes..i only wan duplicate orders with minutes difference less than 30mins
eg
id Order1 date1
1 aaaaa 20051001 12:45
2 aaaaa 20051001 12:10
3 bbbbb 20031002 15:05
4 bbbbb 20031002 15:50
Hi
I€™ve a table like this (in SQL Server 2000).
v1 v2
2 8
7 10
11 15
13 17
v1 value of a row must be grater than v2 value of previous row, other wise I need to display that row, in above example, I need to display 2nd & 4th rows.
please advise
Thanks
I running a query that returns a information from many tables. I need a way to compare the row returned to the previous row. This query currently returns the requested information for everytime an item placed. I need the query to return only the most recent order information. I can do this by doing a basic loop comparing the jobmatl.item and po.order_date. If the jobmatl.item match between the current row and last row compare the dates and keep the oldest.
Declare
@assembly ItemType
SET @assembly = '1110-2014'
SET @assembly = ISNULL(@assembly, '%')
SELECT
DISTINCT
jobmatl.item
, item.description
, item.drawing_nbr
, jobmatl.matl_qty
, itemloc.qty_on_hand
, vendaddr.name
, po.order_date
FROM
jobmatl with (nolock)
inner join item with (nolock) on item.item = jobmatl.item
inner join job with (nolock) on jobmatl.job = job.job
inner join poitem with (nolock) on item.item = poitem.item
inner join po with (nolock) on poitem.po_num = po.po_num
inner join vendaddr with (nolock) on vendaddr.vend_num = po.vend_num
inner join itemloc with (nolock) on itemloc.item = item.item
WHERE
jobmatl.job < ' 990000'
AND
job.item LIKE @assembly
ORDER BY
jobmatl.item
, po.order_date