I have a statement that I'm having trouble converting:
select * from emails join InternalContacts On emails.EmailAddress = InternalContacts.EmailID
When I run this I get -
Conversion failed when converting the varchar value 'credentialing@floridaeyeclinic.com' to data type int.
What is the correct syntax to convert?
why do i have this error? not converting a varchar into int 1 ALTER PROCEDURE dbo.RevertDB
2 (
3 @Log varchar(MAX) = NULL OUTPUT
4 )
5
6 /* Reverts Database to original "Clean" State */
7 AS
8 SET NOCOUNT OFF
9 DECLARE @RowsInDB AS int
10 SET @Log = 'RevertDB Started at ' + CAST(GETDATE() AS varchar(50)) + '<br />'
11
12 /* *** Disable Constraints ***
13 ALTER TABLE Booking NOCHECK CONSTRAINT ALL
14 ALTER TABLE InventoryPC NOCHECK CONSTRAINT ALL
15 ALTER TABLE PC NOCHECK CONSTRAINT ALL
16 ALTER TABLE Platform NOCHECK CONSTRAINT ALL*/
17
18 /* *** Start Deletes *** */
19 DELETE FROM Booking
20 SET @Log = @Log + 'Clear Table Booking - Done' + '<br />'
21 SET @RowsInDB = (SELECT COUNT(BookingID) FROM Booking)
22 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
23
24 DELETE FROM InventoryPC
25 SET @Log = @Log + 'Clear Table InventoryPC - Done' + ''
26 SET @RowsInDB = (SELECT COUNT(InventoryID) FROM InventoryPC)
27 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
28
29 DELETE FROM PC
30 SET @Log = @Log + 'Clear Table PC - Done' + '<br />'
31 SET @RowsInDB = (SELECT COUNT(PCID) FROM PC)
32 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
33
34 DELETE FROM Platform
35 SET @Log = @Log + 'CLear Table Platform - Done' + ''
36 SET @RowsInDB = (SELECT COUNT(PlatformID) FROM Platform)
37 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
38
39 /* *** Enable Constraints ***
40 ALTER TABLE Booking WITH CHECK CHECK CONSTRAINT ALL
41 ALTER TABLE InventoryPC WITH CHECK CHECK CONSTRAINT ALL
42 ALTER TABLE PC WITH CHECK CHECK CONSTRAINT ALL
43 ALTER TABLE Platform WITH CHECK CHECK CONSTRAINT ALL*/
44
45 SET @Log = @Log + '*** End Truncates ***' + '<br />'
46 /* *** End Truncates *** */
47
48 /* *** Start Insert Platform *** */
49 SET @Log = @Log + 'Start Insert Platform' + '<br />'
50
51 EXEC dbo.InsertPlatfrom 'Windows XP SP2 Professional Edition', 'Some description for Windows XP SP2 Professional Edition over here …'
52 EXEC dbo.InsertPlatfrom 'Windows Vista Ultimate', 'See everything you''re working on more clearly with Windows Aero, and quickly switch between windows or tasks using Windows Flip 3D and Live Thumbnails. You can easily find what you need—when you need it―with Instant Search and live icon previews that display the actual contents of your files. And while you''re at it, give your personal productivity a boost with instant access to the information you care about using Windows Sidebar and Gadgets. Put these easy-to-use and customizable mini-applications on your desktop and reveal the information you''re looking for at a glance. Website: http://www.microsoft.com/windows/products/windowsvista/seeit/default.mspx'
53 EXEC dbo.InsertPlatfrom 'Apple Mac OS X Tiger', 'Some description for Apple Mac OS X Tiger over here …'
54 EXEC dbo.InsertPlatfrom 'Apple Mac OS X Leopard', 'Desktop: The new look of Leopard showcases your favorite desktop image and puts new file Stacks at your fingertips for a stunning, clutter-free workspace. Finder: Browse your files like you browse your music with Cover Flow. Time Machine: See how your system looked on any given day and restore files with a click. Website: http://www.apple.com/macosx/leopard/features/'
55 EXEC dbo.InsertPlatfrom 'Red Hat Linux', 'Some description for Red Hat Linux over here …'
56
57 SET @Log = @Log + 'Rows In Platform: ' + CAST((SELECT COUNT(PlatformID) FROM Platform) AS varchar(10)) + '<br />'
58 /* *** Start Insert PC *** */
59 SET @Log = @Log + 'Start Insert PC' + '<br />'
60
61 DECLARE @WinXP int, @WinVista int, @OSXTiger int, @OSXLeopard int, @RedHat int
62 SET @WinXP = (SELECT PlatformID FROM Platform WHERE Title = 'Windows XP SP2 Professional Edition')
63 SET @WinVista = (SELECT PlatformID FROM Platform WHERE Title = 'Windows Vista Ultimate')
64 SET @OSXTiger = (SELECT PlatformID FROM Platform WHERE Title = 'Apple Mac OS X Tiger')
65 SET @OSXLeopard = (SELECT PlatformID FROM Platform WHERE Title = 'Apple Mac OS X Leopard')
66 SET @RedHat = (SELECT PlatformID FROM Platform WHERE Title = 'Red Hat Linux')
67
68 EXEC dbo.InsertPC 'Fusion PC One', 'Description here ...', 'Intel Core2 Duo E6600 2.4 GHz 1066MHz', '1GB Dual Channel DDR2 667 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3', '22" 3000:1 Wide Screen LCD', @WinXP
69 EXEC dbo.InsertPC 'Fusion PC Two', 'Description here ...', 'Intel Core2 Duo E6850 3 GHz 1333MHz', '2GB Dual Channel DDR2 800 SDRAM', '240GB SATA2 NCQ HDD', 'NVIDIA GeForce 8800 Ultra 256MB GDDR3 SLI', '24" 3000:1 Wide Screen LCD', @WinVista
70 EXEC dbo.InsertPC 'Fusion PC Three', 'Description here ...', 'AMD Athlon 64 X2 Dual Core 6000+ 3 GHz', '2GB Dual Channel DDR2 667 SDRAM', '240GB SATA2 NCQ HDD', 'ATI Radeon Cross Fire 2900 256MB GDDR3', '24" 3000:1 Wide Screen LCD', @WinVista
71 EXEC dbo.InsertPC 'Fusion X1', 'Description here ...', 'Intel Core2 Extreme Q6850 3 GHz 1333MHz', '6GB Dual Channel DDR2 800 SDRAM', '500GB SATA2 NCQ HDD', 'NVIDIA GeForce 8800 Ultra 256MB GDDR3 SLI', '30" 3000:1 Wide Screen LCD', @OSXLeopard
72 EXEC dbo.InsertPC 'Fusion X2', 'Description here ...', 'AMD Athlon 64 FX 74 3 GHz', '6GB Dual Channel DDR2 800 SDRAM', '500GB SATA2 NCQ HDD', 'NVIDIA GeForce 8900 Ultra SLI 256MB GDDR3', '30" 3000:1 Wide Screen LCD', @WinVista
73 EXEC dbo.InsertPC 'Fusion Tiger 1', 'Description here ...', 'Intel Core2 Duo E6600 2.4 GHz 1066MHz', '2GB Dual Channel DDR2 800 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3 SLI', '22" 3000:1 Wide Screen LCD', @OSXTiger
74 EXEC dbo.InsertPC 'Fusion Linux 1', 'Description here ...', 'AMD Athlon 64 X2 6000+ 3 GHz', '1GB Dual Channel DDR2 800 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3', '22" 3000:1 Wide Screen LCD', @RedHat
75
76 SET @Log = @Log + 'Rows In PC: ' + CAST((SELECT COUNT(PCID) FROM PC) AS varchar(10)) + '<br />'
77
78 /* *** Start Insert Inventory *** */
79 SET @Log = @Log + 'Start Insert Inventory' + '<br />'
80
81 DECLARE @F1 int, @F2 int, @F3 int, @FX1 int, @FX2 int, @FT1 int, @FR1 int
82 SET @F1 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC One')
83 SET @F2 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC Two')
84 SET @F3 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC Three')
85 SET @FX1 = (SELECT PCID FROM PC WHERE Title = 'Fusion X1')
86 SET @FX2 = (SELECT PCID FROM PC WHERE Title = 'Fusion X2')
87 SET @FT1 = (SELECT PCID FROM PC WHERE Title = 'Fusion Tiger 1')
88 SET @FR1 = (SELECT PCID FROM PC WHERE Title = 'Fusion Linux 1')
89
90 EXEC dbo.InsertInventory 10, @F1, 2.5, 'iCluster Fusion One'
91 EXEC dbo.InsertInventory 10, @F2, 2.5, 'iCluster Fusion Two'
92 EXEC dbo.InsertInventory 10, @F3, 2.5, 'iCluster Fusion Three'
93 EXEC dbo.InsertInventory 6, @FX1, 6, 'iCluster Fusion X1'
94 EXEC dbo.InsertInventory 6, @FX2, 6, 'iCluster Fusion X2'
95 EXEC dbo.InsertInventory 10, @FT1, 3, 'iCluster Fusion Tiger One'
96 EXEC dbo.InsertInventory 30, @FR1, 2, 'iCluster Fusion Linux One'
97
98 SET @Log = @Log + 'Rows In Inventory: ' + CAST((SELECT COUNT(InventoryID) FROM InventoryPC) AS varchar(10))
99
100 RETURN @Log
if i remove the last line then all is well. but i get "An SqlParameter with ParameterName '@Log' is not contained by this
SqlParameterCollection."
I am trying to have the aggregate value 1 replaced by 'only one' in my results.
My data looks like this:
Customer_id (int) ; Salesperson_id
1 ; 1
2 ; 1
3 ; 1
4 ; 2
5 ; 2
6 ; 3
...this is the solution I tried:
select
case when count(convert(varchar(15), customer_id)) = 1
Then 'only one customer'
else count(convert(varchar(15), kund_id)) end as no_of_customers,
salesperson_id
from customerdb
group by
salesperson_id
...and this is the result I was hoping for
no_of_customers ; salesperson_id
3 ; 1
2; 2
only one customer;3
...but SQL server only returns: Conversion failed when converting the varchar value ...
Hi guys,
My query was working fine until I added the red writing below.
Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.
Now when I run it I get
Conversion failed when converting the varchar value 'po_num' to data type int.
Any ideas? Thanks!
SELECT t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
MIN(
CASE
WHEN t8.linestatus = 'O'
THEN t9.docnum
ELSE NULL
END) po_num,
t10.docduedate
FROM
(SELECT t0.product product ,
SUM(
CASE
WHEN t0.qty_topick <> t0.qty_picked
THEN t0.qty_topick - t0.qty_picked
ELSE 0
END) shorted
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)
GROUP BY t0.product
) t3
INNER JOIN comparison.dbo.vlgxplc t2
ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS
LEFT JOIN
(SELECT t0.product AS product,
SUM(t0.quantity) AS onhand
FROM rbeacon.dbo.binlocat t0
GROUP BY t0.product
) t4
ON t3.product = t4.product
INNER JOIN wbau.dbo.oitm t5
ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.ocrd t6
ON t5.cardcode = t6.cardcode
INNER JOIN wbau.dbo.oitm t7
ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.por1 t8
ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.opor t9
ON t8.docentry = t9.docentry
LEFT JOIN comparison.dbo.podatetest('po_num') t10
ON t10.docnum = t9.docnum
WHERE t3.shorted <> 0
GROUP BY t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
t6.cardname,
t10.docduedate
ORDER BY t2.u_vlgx_plc,
t6.cardname ,
t3.product
I am recieving the following error when executing the following code. Field MonData is nvarchar (80), the only integer feild in the concatination is @Cnt all other fields are varchar or nvarchar. If I remove the everything past space(22) it works fine. I double checked the length and it does not exceed 80 bytes.
Can anyone see what I am doing wrong?
INSERT INTO tbl_Export
Select DISTINCT TOP(1) space(32) + '9' + space(2) + @Cnt + space(2) + Sys + space(2) +
Prin + space(22) + 'TEN' + space(1) + 'ZZ' As MonData
FROM dbo.Trans
WHERE Sys = @vwSys AND Prin = @vwPrin
ERROR:
Conversion failed when converting the varchar value 'TEN' to data type int.
Any input is welcome, thanks so much.
I have a Condition in my stored procedure
AND tt.RevenueTypeID LIKE CASE WHEN @iRevenueTypeID = -1 THEN '%' ELSE @iRevenueTypeID END
@iRevenueTypeID is declared as VARCHAR(6)
When i am passing 'PRP in the the Stored procedure for iRevenueTypeID
it was working fine till now but now it is giving error as
Conversion failed when converting the varchar value 'PRP' to data type int.
What i am doing wrong?
I have written below query.
-- AssignedToTasks 32,'from (Select Distinct wft.*','
OVER(Order by task.TaskId desc)','','where IsActive=1 AND RecurrenceRule is null',0,5
Alter PROCEDURE [dbo].[AssignedToTasks]
@UserId varchar(15) ,
@selectClause Nvarchar(max),
[Code] ....
Within in Visual Studio 2012 solution, I have several projects, one of which is a Database project. I am defining several tables. The one in question is:
CREATE TABLE [dbo].[tblKppHierarchyPcl]
(
[ID] NUMERIC(18,0) NOT NULL,
[Name] VARCHAR(500),
[PartStructureKey] NUMERIC(18,0) NOT NULL,
[PartNumber] VARCHAR(500) NOT NULL,
[ParentPartNumber] VARCHAR(500) NULL,
[code]...
Error SQL72014: .Net SqlClient Data Provider: Msg 245, Level 16, State 1, Line 76 Conversion.failed when converting the varchar value 'Coolant Quick Disconnect' to data type int.So it has a problem with inserting 'Coolant Quick Disconnect' into the Name column. The Name column is CLEARLY a varchar column but somehow it thinks it's an int column.
Table:Student
Name nvarchar(1000)
Status int
In the stored procedure - I have got a string which contains comma separated Status Values such as
DECLARE @validStatus = '1000,1001,1002'
I want to return the count of students having the status code as in @validStatus
SELECT count(1) FROM Student WHERE Status in (@validStatus)
But the above statement is erroring out with
Conversion failed when converting the varchar value '1000,1001,1002' to data type int.
Any help/suggestion appreciated.
Thanks,
Loonysan
Hi guys,
My query was working fine until I added the yellow highlighted areas below.
Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.
Now when I run it I get
Conversion failed when converting the varchar value 'po_num' to data type int.
Any ideas? Thanks!
SELECT t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
MIN(
CASE
WHEN t8.linestatus = 'O'
THEN t9.docnum
ELSE NULL
END) po_num,
t10.docduedate
FROM
(SELECT t0.product product ,
SUM(
CASE
WHEN t0.qty_topick <> t0.qty_picked
THEN t0.qty_topick - t0.qty_picked
ELSE 0
END) shorted
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)
GROUP BY t0.product
) t3
INNER JOIN comparison.dbo.vlgxplc t2
ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS
LEFT JOIN
(SELECT t0.product AS product,
SUM(t0.quantity) AS onhand
FROM rbeacon.dbo.binlocat t0
GROUP BY t0.product
) t4
ON t3.product = t4.product
INNER JOIN wbau.dbo.oitm t5
ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.ocrd t6
ON t5.cardcode = t6.cardcode
INNER JOIN wbau.dbo.oitm t7
ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.por1 t8
ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.opor t9
ON t8.docentry = t9.docentry
LEFT JOIN comparison.dbo.podatetest('po_num') t10
ON t10.docnum = t9.docnum
WHERE t3.shorted <> 0
GROUP BY t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
t6.cardname,
t10.docduedate
ORDER BY t2.u_vlgx_plc,
t6.cardname ,
t3.product
I'm trying to pass a character (D) to an integer data type!i'm getting this error:Conversion failed when converting the varchar value '17D' to data type int.
View 5 Replies View RelatedI am getting the following message when trying to run the below sql
Msg 245, Level 16, State 1, Line 15
Conversion failed when converting the varchar value 'Select COUNT(*) From Adventures.dbo.tblLibrary' to data type int.
Declare @Datestart as Date
Declare @CntBefore as int
Declare @CntNow as int
Declare @Database as varchar(30)
Declare @TableName as varchar(60)
[Code] ....
I try to compile your query, and prompt error message in below 'conversion failed when converting the varchar value 'times' to data type int .Error code 245.
select
user_member
, sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) + ' times'
, max(case when trx_date < dateadd(month, -3, getdate()) then trx_date else NULL end)
from trx_hdr
group by user_member
CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1
WHEN NULLIF(Surname, '') IS NULL THEN 2
WHEN NULLIF(Forename, '') IS NULL THEN 3
WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4
WHEN NULLIF(AddressLine1, '') IS NULL THEN 5
[code]...
The above code worth great but ideally instead of returning a number Id like to return text for example
1 = NHS
2= SUR
3=FOR
4=DOB
5=ADD
6=PCO
7=GPN
8=PCZ
9=GPD
10=CCG
i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc.
With Disk_Space (ResourceID, ComputerName, Description, DiskName, VolumeName, FileSystem, Size, FreeSpace)AS
(
SELECT distinct
SYS.ResourceID,
SYS.Name,
LDISK.Description0,
LDISK.DeviceID0,
LDISK.VolumeName0,
LDISK.FileSystem0,
[code]...
However when i run this query, i get an error :
Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value '1GB To 2GB' to data type int.
Hi, I was using a Store Proc and it was working nice ,
Now, I am getting this error as:
Conversion failed when converting the varchar value 'APCCE' to data type int
Is that should make any problem as well
Just want to know ..the help
Thanks
I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
R222209
R222220
R222222
R222212
R221123
F707768
[Code] .....
I am using T-SQL I have a column (ColA)that has datetime format and I simply want to pull the next day but date only into ColB
ColA
3/12/2014 12:00AM
3/19/2014 12:00AM
ColB
3/13/2014
3/20/2014
I have been trying the command below but keep getting the error "Conversion failed when convertint the varchar value '03-03-2014' to data type int."
Convert (varchar(10), "StartDate", 110)+1 as Next Day
I am getting this error when I run the case statement below. I think I have to convert at some point, but not sure where or how.
Case when m.dispo = 2 then 'Inactive' else m.value end 'Score'
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*),
CASE
WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)'
WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)'
WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)'
ELSE YEAR (0000)
[Code] ...
And got the same error. I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014]
GO
IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL
DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
[code]....
this is in form VB
Private Sub orderidtxbx_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles orderidtxbx.Click
sqlconnection = New SqlConnection("Data Source= xxxx;Initial Catalog = xxxx; user ID = sa; Password = xxxxx;")
sqlcommand = New SqlCommand("select Customer.LastName, Customer.FirstName from customer where ticket.ticketid ='" & orderidtxbx.Text & "'", sqlconnection)
sqlconnection.Open()
sqldatareader = sqlcommand.ExecuteReader()
ListBox1.Items.Add(sqldatareader.Item("LastName") & " " & sqldatareader.Item("FirstName")
error msg The multi-part identifier "ticket.ticketid" could not be bound
query in sql 2005,I need to make store procedure.
SELECT Itinerary.FlightID, Itinerary.Class, Itinerary.Quantity, Ticket.Date, Flight.FlightNo, Flight.AirLine, Flight.DepartureDate, Flight.ArrivalDate,
Flight.DepartureTime, Flight.ArrivalTime, Flight.Price, Departure.DepartureLocation, Arrival.ArrivalLocation,GST=convert(int,Itinerary. Quantity*0.06*Flight.Price),PST=convert(int,Itiner ary.Quantity*0.07*Flight.Price),TotalPrice=convert (int,(Itinerary.Quantity*0.06*Flight.Price)+(Itine rary.Quantity*0.07*Flight.Price)+Flight.Price)
FROM Flight INNER JOIN
Itinerary ON Flight.FlightID = Itinerary.FlightID INNER JOIN
Ticket ON Itinerary.TicketID = Ticket.TicketID INNER JOIN
Departure ON Flight.DepartureLocationID = Departure.DepartureID INNER JOIN
Arrival ON Flight.ArrivalLocationID = Arrival.ArrivalID
WHERE (Itinerary.ticketid = '@Itinerary.ticketid')
if i change WHERE (Itinerary.ticketid = 1)
it will read the data in the table.
I need to refer that itinerary.ticketid into textbox in form that's why i make like this WHERE (Itinerary.ticketid = '@Itinerary.ticketid') but i don't know what is worng with this.
This error Msg 245, Level 16, State 1, Line 2
Conversion failed when converting the varchar value '@Itinerary.ticketid' to data type int(but my ticketid value already integer not varchar).
There are a few databases I work with that have been designed where varchar columns are used to store what actually displays on the front end as Ints, Decimals, Varchars, Datetimes, checkboxes.
I often have to write integrations with these databases bringing data in and prefer to validate the data whilst loading from the staging tables.
I have seen allsorts of values being passed into the staging tables that will load into the target database because the columns are all varchars but the values don't display on the front end because the app actively filters bad values out.
What I would like to do is for my validation scripts to warn up front of potentially invalid datatypes. My problem is that forexample the ISNUMERIC() function return 1 for the value ',1234' but a CONVERT(NUMERIC, ',1234') or CAST(',1234' AS NUMERIC) will fail with a "Error converting data type varchar to numeric).
I've been trying to locate a set of reliable datatype testing functions that will reliably determine if a varchar can be converted to a given data type or not.
i have the following code:
SELECT Quantity
FROM dbo.BNYForwardsTaxLotsForwards
WHERE investmentType ='Forward Cash'
and Quantity < 0
And I get the following error Msg 245, Level 16, State 1, Line 1..Conversion failed when converting the nvarchar value '-12213949.9' to data type int.
Conversion failed when converting datetime from character string:How do I trace this problem?
Funnyfrog
One of my clients decided to put letters into their customers' account numbers. They have a numbering scheme where all temporary accounts have a letter in the account OR are numbered greater than 33000, and all permanent accounts are all digits and less than or equal to 33000. all primary accounts have a NumberSuffix of 000.
Now i am tasked with retrieving all primary, non-temp accounts. I cannot simply do WHERE Number <= 33000 because when it gets to an account containing a letter like "00A01", it craps out and says "Conversion failed when converting the nvarchar value '00A01' to data type int."
So decided to run a filtering query first to filter out all accounts with letters, and then from that dataset select all accounts <=33000.
WITH members (FirstName, LastName, Number, NumberSuffix) AS
(
SELECT
dbo.Entity.FirstName,
dbo.Entity.LastName,
dbo.Entity.Number,
dbo.Entity.NumberSuffix
FROM
dbo.Entity
WHERE
NumberSuffix = 000 AND
Number NOT LIKE '%A%' AND
Number NOT LIKE '%B%' AND
Number NOT LIKE '%C%' AND
Number NOT LIKE '%D%' AND
Number NOT LIKE '%E%' AND
Number NOT LIKE '%F%' AND
Number NOT LIKE '%G%' AND
Number NOT LIKE '%H%' AND
Number NOT LIKE '%I%' AND
Number NOT LIKE '%J%'
)
SELECT *
FROM
members
WHERE
Number <= 33000
ORDER BY
Number
when i do this, i get the same error for some reason. Yet when i execute this at the end instead:
SELECT *
FROM
members
WHERE
Number LIKE '%A%'
ORDER BY
Number
i get an empty set (meaning it actually does get filtered).
but somehow it still able to participate in a range comparison?
WHY??
thanks,
Leon
Okay, I have the following store procedure and I kept getting an error.
Code Block
ALTER PROCEDURE [dbo].[Search]
-- Add the parameters for the stored procedure here
@schoolID int = NULL,
@scholarship varchar(250) = NULL,
@major varchar(250) = NULL,
@requirement varchar(250) = NULL,
@debug bit = 0
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
Declare @SQL as Varchar(4000);
Declare @Params as Varchar(3000);
Set @SQL = N'SELECT * FROM [scholarship] WHERE [sectionID] = ' + @schoolID;
Set @Params = N'@scholarship VARCHAR(250),@major VARCHAR(250),@requirement VARCHAR(250)'
If @scholarship IS NOT NULL
Set @SQL = @SQL + N' AND [scholarship].[schlrName] LIKE + ''%'' + @scholarship + ''%'''
If @major IS NOT NULL
Set @SQL = @SQL + N' AND [scholarship].[Specification] LIKE + ''%'' + @last + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' AND ([scholarship].[reqr1] LIKE + ''%'' + @requirement + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' OR [scholarship].[reqr2] LIKE + ''%'' + @requirement + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' OR [scholarship].[reqr3] LIKE + ''%'' + @requirement + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' OR [scholarship].[reqr4] LIKE + ''%'' + @requirement + ''%'''
If @requirement IS NOT NULL
Set @SQL = @SQL + N' OR [scholarship].[reqr5] LIKE + ''%'' + @requirement + ''%'')'
If @debug = 1
PRINT @SQL
Exec sp_executesql @SQL, @Params, @scholarship, @major, @requirement
END
And I kept getting this error:
Msg 245, Level 16, State 1, Procedure Search, Line 28
Conversion failed when converting the nvarchar value 'SELECT * FROM [scholarship] WHERE [sectionID] = ' to data type int.
Any help is much appreciated.
I am getting the following error :
conversion failed when converting date and or time from character string
I am using Sql Server 2008.(database designed for sql 2005 later moved to sql server 2008).
Pickup_time and actual_Pickup_time are varchar(5) in database.
What is wrong with this query?
Query:
SELECT COUNT(Trip_ID) AS OntimePickupCount
FROM MyTABLE
WHERE Start_Dt BETWEEN '01/01/2014' AND '04/30/2014'
AND (DateDiff(minute, CAST (Pickup_Time AS time), CAST (Actual_Pickup AS time )) BETWEEN 0 AND 15
OR DateDiff(minute, CAST (Actual_Pickup AS time), CAST (Pickup_Time AS time) ) BETWEEN 0 AND 15)
AND Actual_Pickup IS NOT NULL AND Actual_Dropoff IS NOT NULL
I am new to SQL and trying my hand at what I thought would be a simple query to bring back the loan products that are not HMDA reportable - hence the NOT IN and I get an error message after adding the NOT IN...I have read a lot of responses to the issue of an error message of 'Conversion failed when converting the nvarchar value' to try and solve the error - and have had no luck. Before I throw my laptop out the window..Here is the error message along with what I thought was a simple query; Conversion failed when converting the nvarchar value '80/10/10' to data type int.Here is the query;
SELECT
P.ProductID,
P.Name,
PC.Name AS [Product Group],
LP.Name AS [Loan Purpose],
CASE WHEN LP.IsHMDAReportableFL = 0 THEN 'No' ELSE 'Yes' END AS [HMDA Reportable],
[code]...
Exception in one of the stored procs:
Conversion failed when converting the nvarchar value to datatype int. After moving database from 2000 to 2005.
Using backup and restore.
Note I had the same issue after restoring the production database on my local server SQL2000->SQL2000.
The problem was solved by restoring master and msdb from the production. But I can't do this on the SQL2005.
This is not a collation issue as I have ensured collation is the same on all databases including the system ones.
The database in question makes extensive use of user defined data types (Which I have recreated on the destination server).
Can anyone please help?
Raf
This is probably a simple wuestion but i would appreciate some help
I am trying to get and insert the userId into a table called "Orders"
I got the user id as
Dim CustomerId As Object = Membership.GetUser(User.Identity.Name).ProviderUserKey.ToString
The button on click command is
worldshop.ShoppingCart.CreateOrder(CustomerId,.........................
The Function Has the parameter for Customer Id as follows
Dim dbParam_CustomerId As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter dbParam_CustomerId.ParameterName = "@CustomerId" dbParam_CustomerId.Value = CustomerId dbParam_CustomerId.DbType = System.Data.DbType.String command.Parameters.Add(dbParam_CustomerId)
When i run this I am getting the error message
"Conversion failed when converting from a character string to uniqueidentifier."
Can anyone tell me where I am going wrong
many thanks
Martin
Hi, i have a problem, i keep getting this Error.
I want to insert an uniqueidentifier using a textbox, i use the following code to insert.
SqlDataSource1.InsertParameters["RWID"] = new Parameter("RWID", TypeCode.String, RWID);
SqlDataSource1.Insert();
The databasetype is an uniqueidentifier of that column.
Anyone who can help me with this problem?
I am trying to store a unique identifier that is text into a field in a SQL DB that is type uniqueidentifier and I get the follow error message.
Conversion failed when converting from a character string to uniqueidentifier.
My Code is shown below:
comSQL.Parameters.AddWithValue("@PROPERTYID", Format(Request.QueryString("ID").ToString, "{0:########-####-####-####-############}"))
This has worked before but isnt' anymore. Any ideas?