I have the piece of sql code here below that keeps giving out duplicates. How to resolve this.
isnull((select distinct (SUM(a1.ActualDebit) - SUM(a1.ActualCredit) ) from #MainAccount a1
LEFT OUTER JOIN
#BudgetAccount bb ON aa.AccountID = bb.AccountID AND a1.PeriodStartdate = bb.PeriodStartDate and
a1.DateMonth=bb.DateMonth and a1.Budget = bb.Budget WHERE a1.AccountID = aa.AccountID and
a1.Refdate >= @FROMDATE and a1.Refdate <= @TODATE GROUP BY a1.group1, a1.Group2),0)
As Actual_CurrentMonth,
I have tried and attached the computed results and also expecting results.
IF OBJECT_ID('tempdb..#tmpExam1')IS NOT NULL DROP TABLE #tmpExam1 IF OBJECT_ID('tempdb..#tmpExam2')IS NOT NULL DROP TABLE #tmpExam2 IF OBJECT_ID('tempdb..#tmpExam3')IS NOT NULL DROP TABLE #tmpExam3
I have a table with 22 million Business records. I can see that there are duplicates when I group by BusinessName and Address and Phone. I'd like to place only the duplicates into a table, with a ranking, oldest business key gets a ranking of 1.
As a bonus I'd like each group to have a distinct group name (although not necessary, just want to know how to do this)
Later after I run more verifications to make sure these are not referenced elsewhere I'll delete everything with a matchRank > 1 out of the main Business table.
DROP TABLE [dbo].[TestBusiness]; GO CREATE TABLE [dbo].[TestBusiness]( [Business_pk] INT IDENTITY(1,1) NOT NULL, [BusinessName] VARCHAR (200) NOT NULL, [Address] VARCHAR(MAX) NOT NULL,
WITH cte_OrderProjectType AS ( select Orderid, min(TypeID) , min(CTType) , MIN(Area) from tableA A inner join tableB B ON A.PID = B.PID left join tableC C ON C.TypeID = B.TypeID LEFT JOIN tableD D ON D.AreaID = B.ID group by A.orderid )
This query uses min to eliminate duplicates. It takes 1.30 seconds to complete..
Is there any way I can improve the query performance ?
Auto_ID Account_ID Account_Name Account_Contact Priority 1 3453463 Tire Co Doug 1 2 4363763 Computers Inc Sam 1 3 7857433 Safety First Heather 1 4 2326743 Car Dept Clark 1 5 2342567 Sales Force Amy 1 6 4363763 Computers Inc Jamie 2 7 2326743 Car Dept Jenn 2
I'm trying to delete all duplicate Account_IDs, but only for the highest priority (in this case it would be the lowest number).
I know the following would delete duplicate Account_IDs:
DELETE FROM staging_account WHERE auto_id NOT IN (SELECT MAX(auto_id) FROM staging_account GROUP BY account_id)
The problem is this doesn't take into account the priority; in the above example I would want to keep auto_ids 2 and 4 because they have a higher priority (1) than auto_ids 6 and 7 (priority 2).
How can I take priority into account and still remove duplicates in this scenario?
I have a bunch of contacts that I've scored how well their names match to other contacts in the same business. I can programmatically figure out how to parse the results, but would like to know how to do this via SQL. My problem is for Business_fk 968976 I have 7 contacts. In the end I should have 4 contacts based on name match. For the business key listed Gerardo Lopez is in the ContactScore table twice for Contact keys 7355719 and 57028145. I then have two rows like so:
Each reference each other, and 2 is a good case, a more difficult case would have key 1 listed 10 times showing a ContactMatch_fk of 2 - 11, and then Contact_fk 2 listed 10 times with a ContactMatch_fk of 1, 3-11.I know 57028145 maps to 7355719 from the first row in the ContactScore table, so when Contact_fk of 7355719 comes up I should be able to skip it and not process that match. Hopefully that makes sense. Anyway here is the test data:
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[ContactScore]') AND type in (N'U')) DROP TABLE [dbo].[ContactScore]; GO CREATE TABLE [dbo].[ContactScore] ( [ContactScore_pk]INT NOT NULL, [Contact_fk]INT NOT NULL,
I have a patient record and emergency contact information. I need to find duplicate phone numbers in emergency contact table based on relationship type (RelationType0 between emergency contact and patient. For example, if patient was a child and has mother listed twice with same number, I need to filter these records. The case would be true if there was a father listed, in any cases there should be one father or one mother listed for patient regardless. The link between patient and emergency contact is person_gu. If two siblings linked to same person_gu, there should be still one emergency contact listed.
Below is the schema structure:
Person_Info: PersonID, Person Info contains everyone (patient, vistor, Emergecy contact) First and last names Patient_Info: PatientID, table contains patient ID and other information Patient_PersonRelation: Person_ID, patientID, RelationType Address: Contains address of all person and patient (key PersonID) Phone: Contains phone # of everyone (key is personID)
The goal to find matching phone for same person based on relationship type (If siblings, then only list one record for parent because the matching phones are not duplicates).
;WITH ctePreAgg AS ( select top 500 act_reference "ActivityRef", row_number() over (partition by act_reference order by act_reference) as rowno, t3.s_initials "Initials" from mytablestuff order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
I have a Table with records and some of them are actually multiple records. I need to query SQL 2005 (compare) field values on more than one column to return these records.
I am an absolute beginner and need some guidance on how to start on this. Can anyone advise.
I am trying to find when a name has been entered more than once into 1 database table.
I'm currently doing something like this (can't remember exactly, not at work)
SELECT COUNT(*) AS Cnt, Name FROM tblTable GROUP BY Name ORDER BY Cnt Desc
This brings back all the Names in the database and tells me which are duplicates but I want to just have the results of the duplicate values and not the single values.
mytable fld1 int primkey fld2 varchar(20), fld3 varchar(20)From the definition of the above table, how do i do i modify my below query to only select the rows with duplicates in fld2. I know a groupby with a having count will display the duplicates for a given field, but i want my query to see all the fields and rows that are duplicates. select fld1, fld2, fld3 from mytable
Obviously, I'm new here so I'd like to start by thanking anyone for their help with this very newbie SQL search query question.
I have been tasked with trying to figure out how to get search results from several different columns of two different tables within a database. I have successfully accomplished this, but one column has many many duplicates. I have read on these forums about using the DISTINCT command to eliminate this, but so far have been unsuccessful. Here is the search I'm using...(columns 1, 2, and 3 are from one table and columns 4 and 5 are from another. The results need to be in ascending order (alphabetical) of column1.
select column1, column2, column3, column4, column5 from table1, table2 order by column1;
The result of this is great except that column1 has many duplicates.
I tried entering the search like this...
select distinct column1, column2, column3, column4, column5 from table1, table2 order by column1;
I have a DELETE statement that deletes duplicate data from a table. Ittakes a long time to execute, so I thought I'd seek advice here. Thestructure of the table is little funny. The following is NOT the table,but the representation of the data in the table:+-----------+| a | b |+-----+-----+| 123 | 234 || 345 | 456 || 123 | 123 |+-----+-----+As you can see, the data is tabular. This is how it is stored in the table:+-----+-----------+------------+| Row | FieldName | FieldValue |+-----+-----------+------------+| 1 | a | 123 || 1 | b | 234 || 2 | a | 345 || 2 | b | 456 || 3 | a | 123 || 3 | b | 234 |+-----+-----------+------------+What I need is to delete all records having the same "Row" when there existsthe same set of records with a different (smaller, to be precise) "Row".Using the example above, what I need to get is:+-----+-----------+------------+| Row | FieldName | FieldValue |+-----+-----------+------------+| 1 | a | 123 || 1 | b | 234 || 2 | a | 345 || 2 | b | 456 |+-----+-----------+------------+A slow way of doing this seem to be:DELETE FROM XWHERE Row IN(SELECT DISTINCT Row FROM X x1WHERE EXISTS(SELECT * FROM X x2WHERE x2.Row < x1.RowAND NOT EXISTS(SELECT * FROM X x3WHERE x3.Row = x2.RowAND x3.FieldName = x2.FieldNameAND x3.FieldValue <> x1.FieldValue)))Can this be done faster, better, and cheaper?
-- declared variables declare @database_name varchar(100), @table_name varchar(100), @primary_key_field varchar(100) declare @list varchar(8000) -- set values to variables set @list = '' set @database_name = 'data200802_dan' set @table_name = 'other02' set @primary_key_field = 'callid'
use database
select @list = @list + column_name + ', ' from information_schema.columns where table_name = @table_name --table name and column_name != @primary_key_field --unique identifier select @list = substring(@list, 1, len(rtrim(@list)) - 1)
--above 5 lines btw came from a helper in the msdn forum. thanks
SELECT DISTINCT @list INTO '#' + @table_name FROM @table_name @table_name + ':' IF (SELECT COUNT(*) FROM @database_name + '.dbo.' + @table_name) = 0 BEGIN INSERT INTO @database_name + '.dbo.' + @table_name + '(' + @list + ')' SELECT @list FROM '#' + @table_name END ELSE BEGIN DELETE @database_name + '.dbo.' + @table_name +' ( ' + @list + ')' GOTO @table_name END DROP TABLE '#' + @table_name
the query above is basically.. selecting all the fields from a table in database W/OUT their primary key. then putting them in a temp table.. delete all the records in the original table. then paste the records from the temp table into the original table.
is there a way for this to work? i don't know how to use the variables w/ this script. please help me correcting this query..
I am working with a bunch of records that have duplicates on the Persid and the intPercentID where there are duplicates I want to remove when I stick them in the temp table, I tried join on tempo table and doing not exists but still inserts, so now I am trying a merge but same thing. how can I keep duplicates from being inserted in the temp table. I made a cursor as well but its slow as heck, but it does work. trying better ways.
Create table #TempStr (STRId int not null Identity(1,1) primary key, Persid int, percentId int, dtCreated datetime, CreatedBy int)
INSERT #TempStr (Persid, percentId, dtCreated, CreatedBy) select intPersonnelID, intPercentID, dtSubmitted, intSubmittedBy from tblSTR whereintpercentId in (61,62) group by intPercentID, intPersonnelID, dtSubmitted, intSubmittedBy UNION ALL
I need to make a selection on join datasets with 2 conditions and populate the results in another dataset(Report).It is working with the fist condition "AccountingTypeCharacteristicCodeId = 3"...
I have a query which is working fine. Is it possible that if the table3's column(Child) is only related to table 1 to show it under table 1 and not under table 2, but at the same time another (Child) has a parent in table 2 (which usually is the case) it will show under table 2 as its currently doing.
In other words Child column is directly under Table2's row column name (Father), but occasionally it comes under Table1 with no relation to Table 2.
How can I out put that in a query for a treeview? I am assuming that I will have to program the out come in c# also with 3 for loops and in the second loop I can check if the column is grandchild or Child and make that as a second row or 2nd node of treeview, but I am having a problem building a query in sql.
The query below shows all Parent, then child then grand child(all well and working), but what is desired is at times child takes place of a father.
declare @x as xml set @x = ( SELECT distinct Table1.AssetSysID, Table1.Asset_ID , Table1.FromLR, Table1.Asset_ID + ', ' + Table1.[Desc2] as GarndFather, Table2.ACISysID ,Table2.PAssetSysID, Table2.FeatureName + ', ' + Table2.[DESC] AS Father, Table3.ITMSysID ,Table3.Item_ID + ',' + Table3.[DESC] as Child
SELECT right('0' + cast(month(s.closing) as varchar(2)), 2) + '/' + cast(year(s.closing) as varchar(4)) as ClosingDate, p.name as Project, SUM(s.amount) as TotalSales FROM Sales s JOIN Project p ON p.projectID = s.projectID WHEREs.closing >= DATEADD(mm, -12, GETDATE()) GROUP BY right('0' + cast(month(s.closing) as varchar(2)), 2) + '/' + cast(year(s.closing) as varchar(4)), p.name
This will give me the grouping by month/year and project.
select col1,count(*) from client1..table1 group by col1 union select col1,count(*) from client2..table1 group by col1 union select col1,count(*) from client3..table1 group by col1
The results yields
33915 3405 3412
I am trying to get the following result but can't figure out how to get the total in the end.
I am using the following code in my query to fetch data for my ssrs report which have a parameter @auditCode, where multiple auditCodes can be inputted to generate the report.
Is there any other way I can achieve the same functionality avoiding the part charindex(LU.auditCode,@auditCode)<>0 , as it will return wrong results.
For instance, it will return, the results for the audit code ‘INPS45’ and ‘INPS450000’ when audit code ‘INPS45’ is inputted.
SELECT distinct Ac.activityCode, Ac.ActivityName + isnull(Ac.description,'') AS ActivityName, Ac.activityStartDate, Ac.activityEndDate, LU.auditCode, LU.AuditName, St.studyCode AS StudyCode, St.StudyName AS StudyName
I am having table which is having 5 columns say A,B,C,D and E. There are chances to change in C,D,E columns. I want to identify if any change happened in the above column and show to user prev value + new value.
i.e. i want to prepare query by using calculated extra 6 column where i want to put change happned in C,D,E columns.
I have a table CombinedSales script below (CreateCombSalesTable.sql) which contains the details of a sale.
A row in the table has two flags online/offline SalesAmount is the financial amount, online = 1 (online sales) online = 0 (combined sales off and online).
The table also contains the product and the client etc.,
What I am trying to do is subtract onlinesales from combinedsales within the query or outside I don't mind, to return the result as (below)
select skuid,SUM(SalesAmount),online,ClientName from t_CombinedSalesDetails where ClientName ='Asda' and SkuId = 200437 group by Skuid,Online,ClientName order by skuid
THIS is what I get below the online = 0 is the total sales of this product.
/****** Object: Table [dbo].[t_CombinedSalesDetails] Script Date: 27/08/2014 13:23:27 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON
I have a SP that manipulates data for picking products and puts them into a temp table "#PickList" which is used for the basis of printing a picking note report.
I have also added code at the end of the SP to take the "#PickList" data and insert into a permanent table called "BWT_Lift_Transaction" and then use the bcp command to query it out to a text file. All this works fine, until the bcp command runs. Although the records are in the table, bcp returns nothing. Here is the code:
The earlier parts of the code create the filename for the text file and location to store it. If I insert a SELECT on the dbo.BWT_Lift_Transaction directly after the insert, I can see the data in there, but although the bcp command creates the file correctly, it returns no data:
output
NULL Starting copy... NULL 0 rows copied. Network packet size (bytes): 4096 Clock Time (ms.) Total : 1 NULL
If I remove the delete statement at the end and run the code twice, it will insert the data into the table twice. On the first run, nothing is returned by bcp. On the second run, the first set is returned by bcp, not both sets.
I don't understand why this is, but I guess it's something to do with transaction commitment and the way bcp works.
how to properly use the "For XML Path" code to concatenate multiple values into one record. What I have is a procedure I've written for a SSRS report that summarizes drive information: date, account, recruiter, times.But each drive can have multiple shifts, and each shift will have it's own vehicle assigned. So a drive may have 1 vehicle assigned to it or it may have 5. If there are 5 shifts/5 vehicles, I don't want to the report to display 5 rows of data for the one drive. So I'm trying to get all of the vehicles to be placed into one field for the report.My initial sub-query will not work because it is possible that it will contain more than one item (vehicle):
Select DM.DriveID [DriveID], DM.FromDateTime [FromDateTime], DSD.ShiftID [ShiftID], Case When DM.OpenToPublic = 1 Then 'Yes' Else 'No' End As [OpenToPublic], Case When DM.OwnerType=0 Then 'Mobile' Else 'Fixed' End As [OwnerType], Case When DM.OwnerType = 0 Then Acct.Name Else CD.DescLong End As [OwnerName],
[code]...
SQL Server Newbie or here either. I'm a newbie as well.
