insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 1,0,0,0,0,2014,1,1)
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 0,2,0,0,0,2014,1,2)
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 0,0,3,0,0,2014,1,3)
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 0,0,0,4,0,2014,1,4)
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 0,0,0,0,0,2014,1,5)
[Code] ....
Current result:
SVPWk1Wk2Wk3Wk4Wk5YQWk
SVP10000201411
SVP02000201412
SVP00300201413
SVP00040201414
I'm working on a report where my table is as follows:
WITH SampleData (ID,NAME,[VALUE]) AS ( SELECT 170983,'DateToday','6/04/2014' UNION ALL SELECT 170983,'DateToday','6/04/2014' UNION ALL SELECT 170983,'employee','1010' UNION ALL SELECT 170983,'employee','1010'
[Code] .....
Here is my query against the table above:
SELECT ID ,MAX(CASE WHEN NAME = 'employee' THEN VALUE END) AS PERSON ,MAX(CASE WHEN NAME = 'DateToday' THEN VALUE END) AS REQUEST_DATE ,MAX(CASE WHEN NAME = 'LeaveStartDate' THEN VALUE END) AS REQUEST_START_DATE ,MAX(CASE WHEN NAME = 'LeaveEndDate' THEN VALUE END) AS REQUEST_END_DATE ,MAX(CASE WHEN NAME = 'HoursPerDay' THEN VALUE END) AS REQUESTED_HOURS ,MAX(CASE WHEN NAME = 'LeaveType' THEN VALUE END) AS REQUEST_TYPE
FROM SampleData
Here is the result from the above query, I'm not sure how to get the desired results (listed at the end):
I am using the following code in my query to fetch data for my ssrs report which have a parameter @auditCode, where multiple auditCodes can be inputted to generate the report.
Is there any other way I can achieve the same functionality avoiding the part charindex(LU.auditCode,@auditCode)<>0 , as it will return wrong results.
For instance, it will return, the results for the audit code ‘INPS45’ and ‘INPS450000’ when audit code ‘INPS45’ is inputted.
SELECT distinct Ac.activityCode, Ac.ActivityName + isnull(Ac.description,'') AS ActivityName, Ac.activityStartDate, Ac.activityEndDate, LU.auditCode, LU.AuditName, St.studyCode AS StudyCode, St.StudyName AS StudyName
I'm trying not to use a temp table, but i may have to do so.. I'm using sql2005 for this case.
i have a derived table that makes the following results:
ID Status Name
2 1 "A"
2 2 "B"
I want to get the following:
ID Name1 Name2
2 "A" "B"
but like I said before, I can't repeat the query that gets the first 2 rows, as it's pretty invovled. a temp table is the best route I see right now, but I just wanted to be sure I'm not missing something. If I've aliased it as 'results', is there a way to alias results again as something else? or maybe a trick with CTEs? I will try that! It seems promising.
I'm trying not to use a temp table, but i may have to do so..
i have a derived table that makes the following results:
ID Status Name 2 1 "A" 2 2 "B"
I want to get the following: ID Name1 Name2 2 "A" "B"
but like I said before, I can't repeat the query that gets the first 2 rows, as it's pretty invovled. a temp table is the best route I see right now, but I just wanted to be sure I'm not missing something.
I am working with a table that has a column which stores multiple data/values that are comma separated.
I need to be able to query that table and get those rows where the values in that column match a pre-defined search list.
I was thinking of somehow trying to take the search list and convert it to a table(temp or a cte) and then JOIN to the table.
however, since the column may contain multiple values, i would need to parse/separate that first. I am not sure how to parse and then join to a list (if that is even the best way to solve this) to only get the rows where the search column contains one or more of the items we're looking for.
Below is some sample data:
Declare @BaseTable table (PKCol int, Column2Search varchar(2000)) Insert into @BaseTable (PKCol, Column2Search) Select 1001, 'apple,orange,grapefruit' UNION ALL Select 1002, 'grapefruit,coconut' UNION ALL
Hi!I have a table looking like(username) (account number) (start date) (end date) (product)wich I can have up to 4 lines for the same client.I wist to transfert those lines into a new table looking like(username) (account number) (start date 1) (end date 1) (product 1)(start date 2) (end date 2) ... (product 4)How (in SQL) I could do it?
I have a problem that need some help from expert.Is there any way I could combine many rows into a row in Access using Visual Basic. I want to change the below table from TABLE A to TABLE B
TABLE A
SampleCode Test Name
Result ID Name Sex
9300105 Peripheral Blood Film ....
a few poikilocytes are present. S7585512E DHANDAPANI MAHESH M
9300105 Peripheral Blood Film ....
No blast cells seen. S7585512E DHANDAPANI MAHESH M
9300105 Peripheral Blood Film ....
microcytes, elongated cells and S7585512E DHANDAPANI MAHESH M
9300105 Peripheral Blood Film ....
hypochromic but normocytic: . Some S7585512E DHANDAPANI MAHESH M
9300105 Peripheral Blood Film ....
Majority of rbcs appear slightly S7585512E DHANDAPANI MAHESH M
Output:
TABLE B
SampleCode Test Name
Result ID Name Sex
9300105 Peripheral Blood Film ....
a few poikilocytes are present, No blast cells seen.microcytes, elongated cells and hypochromic but normocytic. Some Majority of rbcs appear slightly S7585512E DHANDAPANI MAHESH M
I am writing a database system which recieves information parsed from various data formats. These data formats may or may not be complete, and as such some rows in the database can have gaps. The input formats may contain reference to the same row (in this case the same Company record) but hold different facts about that company. Eg one message may have name, phone and fax, whereas another message may contain name, address and website. I need to be able to insert new companies into the database OR update current records with extended data as relevant, ive been looking for UPSERT or MERGE queries in SQL Server but i cant find any useful resources explaining its use. Alternativly i'd like to be able to condense potential duplicates into single rows, eg: NamePhoneEmailnullNamePhonenullWebsite which would combine into one row where the null values get set by values derived from other similar rows: Name PhoneEmailWebsite
Any help at all would be really appreciated Thanks, Toby
In Sql Server 2005 Express I have this table:CREATE TABLE [dbo].[Sections]( [SectionID] [int] NOT NULL, [DocumentNo] [smallint] NULL, [SequenceNo] [smallint] NULL, [SectionNo] [smallint] NULL, [DocumentTypeID] [smallint] NULL, [SectionText] [ntext] NULL) Each paragraph of text (SectionText) is in its own row (SectionNo) Each primary document has a DocumentTypeID of 1 with three subdocument types (2=Index, 3=Background, 4=Report).I run this query and return a collection of single rows from various documents grouped together by DocumentNo: SELECT * FROM Sections WHERE CONTAINS (SectionText, 'exercise') ORDER BY DocumentNo For each row that contains the search term, I would like to return the full document (all rows as parapraphs within one row of returned data). In other words, I want to reconstitute the full document as it existed prior to being inserted into the database with paragraph separation. For exampe, if the search term is in row 3 of DocumentNo=5, DocumentTypeID=2, I want to return all the rows of that document in one block of text that retains paragraph format (preferablly with a line break and carriage return between paragraphs). How can this be done?
I am running a query to pull data from 2 tables. However multiple data elements could be attached to one unique ID which when I run the query it repeats causing the entire data set to give inaccurate numbers. How to achieve this:
IS there a way to combine all matching rows in a table so that itoutputs as one row, for example:tblMyStuffUniqueID int IDENTITYParentID intSomeSuch nvarchar(50)SomeSuch2 nvarchar(50)Table data:UniqueID ParentID SomeSuch SomeSuch21 1 Dog Bark2 1 Cat Meow3 3 Cow Moo4 3 Horse Whinnie5 5 Pig OinkDesired query result from Query:SELECT ??? as myText from tblMyStuff WHERE ParentID = 3myText = Cow Moo, Horse WhinnieHelp is appreciated,lq
As you can see its combine two rows of data group by id. Issue is If I use for xml path('') then its replace my html tags <b> to like <b> so after that then I again i need to replace all these symbols. Is it possible to get expected result without using xml path or if we use xml path then still my html tag leave as it is.
With the below query iam able to retrieve all the tables invloved in a stored proc. But, what I want to display the table names as comma separated list for each table.
;WITH stored_procedures AS ( SELECT o.id, o.name AS proc_name, oo.name AS table_name, ROW_NUMBER() OVER(partition by o.name,oo.name ORDER BY o.name,oo.name) AS row FROM sysdepends d INNER JOIN sysobjects o ON o.id=d.id INNER JOIN sysobjects oo ON oo.id=d.depid WHERE o.xtype = 'P') SELECT id,proc_name, table_name FROM stored_procedures WHERE row = 1 ORDER BY proc_name,table_name
I have the following table. There are eight section IDs in all. I want to return a single row for each product with the various section results that I have information on.
Hi,I'm working on a system migration and I need to combine data from multiplerows (with the same ID) into one comma separated string. This is how thedata is at the moment:Company_ID Material0x00C00000000053B86 Lead0x00C00000000053B86 Sulphur0x00C00000000053B86 ConcreteI need it in the following format:Company_ID Material0x00C00000000053B86 Lead, Sulphur, ConcreteThere is no definite number of materials per Company.I have read the part ofhttp://www.sommarskog.se/arrays-in-sql.html#iterative that talks about 'TheIterative Method' but my knowledge of SQL is very limited and I don't knowhow to use this code to get what I need.Can anyone help me?
Hi everyone,I really appreciate if anyone could help me with this tricky problemthat I'm having. I'm looking for a sample script to combine data inmultiple rows into one row. I'm using sqlserver. This is how data isstored in the table.ID Color111 Blue111 Yellow111 Pink111 GreenThis is the result that I would like to have.ID Color111 Blue, Yellow, Pink, GreenThere is no definite number of colors per ID. I have to use ID togroup these colors into one row. Therefore, ID becomes a unique keyin the table.Appreciate your help and time. Thank you in advance
I have the table below and like to combine the rows to create a single link row in a new column. The rows should be combined based on the job number columns which is the same for the rows to be combined.
DECLARE @M31 ( M31_SQL_ID INT ,JOB_NUMBER INT ,LINE_NUMBER INT ,WORKS_DESC VARCHAR)
[Code] ...
Output should be as below
219242 16/7/15 called tenant and she thought we would just fix for free - advised her I can get a quote how ever she may have to pay - she will call back
219245 16/7/15 called tnt said no report number. Said she will speak with her husband and call back with her decision and 16/07/15 the work order was sent to agent ...
;WITH ctePreAgg AS ( select top 500 act_reference "ActivityRef", row_number() over (partition by act_reference order by act_reference) as rowno, t3.s_initials "Initials" from mytablestuff order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
How to combine multiple rows to single rows for the below sql query.
SELECT dbo.AccessLog.RCDID, dbo.AccessLog.EMPLOYEEID, dbo.AccessLog.LOGDATE, LEFT(dbo.AccessLog.LOGTIME, 5) AS LOGTIME, dbo.AccessLog.INOUT FROM dbo.AccessLog LEFT OUTER JOIN dbo.LogType ON dbo.AccessLog.INOUT = dbo.LogType.INOUT LEFT OUTER JOIN dbo.viwEmployee ON dbo.AccessLog.EMPLOYEEID = dbo.viwEmployee.Employee_ID WHERE dbo.AccessLog.EMPLOYEEID='10763' AND (dbo.AccessLog.LOGDATE BETWEEN '01/04/2015' AND '01/04/2015') ORDER BY dbo.AccessLog.EMPLOYEEID
if your employee rows are all versioned with an effective date, and specific employee records can have more than 1 row, is there a more elegant/efficient way of snagging the correct employee rows than...
select * from [dbo].employee a where a.effDate in (select max(b.effDate) from [dbo].employee b where b.employId = a.employId and b.effDate <= @parmDate)
...not worrying about end dates for now, and also not worrying about duplicate eff dates for same employee id and assuming @parmDate is a passed "as of date"?
This query is the first time I am using the Unpivot syntax and I am coming across a problem. When I try to unpivot my data, I get the following statement:
"Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "Table3.DocketId" could not be bound."
What is the cause of this issue?
Select Table3.DocketId, UP.AssignmentType, Up.AssignedStaff From ( Select distinct Table2.DocketId,
JobRequirements (A) JobID int QualificationTypeID int
EmployeeQualifications (B) EmployeeID int QualificationTypeID int
Employee (C) EmployeeID int EmployeeName int
I need to return a list of all employees fit for a specific job ... The criteria is that only employees who have all the JobRequirements are returned. So if a job had 3 requirements and the employee had just 2 of those qualifications, they would not be returned. Likewise, the employee might have more qualifications than the job requires, but unless the employee has all the specific qualifications the job requires they are not included. If an employee has all the job qualifications plus they have extra qualifications then they should be returned...
How to only return those records where all the child records are present in the other table..
