I want to add the result of a Select statement inside a parameter, not too sure how to pull this off, but here it is...
--Declare needed variables
Declare @NoOfApprovals Int
--Get count of approvals
Select @NoOfApprovals =
(
select NoOfApprovalsToClaim
[code]...
I currently have a stored procedure that is defined as follows:
CREATE PROCEDURE UpdateSyncLog
@TableName char(100),
@LastSyncDateTime datetime,
@ErrorState int OUTPUT
I am using an execute sql task to call this procedure. The connectiontype is ADO .NET and the SQLSourceType is DirectInput. The IsQueryStoredProcedure setting is false, and the following is my SQL Statement I have entered:
exec UpdateSyncLog 'myTestTable', @LastSyncDateTime, @ErrorState
Result set is set to None, as this query returns NO results (i.e. has no select statements in it that returns results).
I have two variables in this SSIS package. CurrentDateTime, and ErrorStateVal. CurrentDateTime is of Data type DateTime, the ErrorStateVal is of type Int32
The parameter mappings are as follows:
Varialbe Name=User::CurrentDateTime, Direction=Input, DateType=DateTime, Parameter Name=@LastSynDateTime, Parameter Size=-1
Variable Name=User::ErrorStateVal, Direction=Output, DateType=Int32, Parameter Name=@ErrorState, Parameter Size=-1
The error I am getting when running this execute sql task is as follows:
Error: 0xC001F009 at AS400 to SQL Full Repopulation Sync: The type of the value being assigned to variable "User::ErrorStateVal" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "exec UpdateSyncLog 'myTestTable', @LastSyncDateTime, @ErrorState" failed with the following error: "The type of the value being assigned to variable "User::ErrorStateVal" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
This makes no sense to me, both the SSIS variable ErrorStateVal is Int32, as well as the parameter declaration in the Execute SQL task is Int32 with direction of OUTPUT, and my stored procedure definition has @ErrorState as an integer as well.
What gives?
Hi,
I need to create a batch process which calls a stored procedure.
Here's the scenario.
I have 3 tables
Theater - TheaterId, TheaterName, Revenues,locationid, stateid
State - StateId, StateName
Location - LocationId, LocationName, StateId
There is a stored procedure spoc_updateTheater that accepts the state and location id and runs a set of sql statements against the theater table. However i want this to run for all the locations in a state one by one. There are some 700 locations in 45 states. How do i pass the location and state id one by one to the stored proc. Can i call this from a commandline or run it as batch process?
vidkshi
My task is to bind and show 3 different values coming from three different queries into three different columns of GridView. I had done this as mention in below. Program was successful. But I want to excute these three queries in same Stored Procedure. I can do that and stored in seperated variables. I need help how to call these three different values in data adapters and store each value in three different columns of grid view.
Simply I want to below statement in stored procedures and call from program. Can any one help me plz.
con = DataBaseConnection.GetConnection();
DataSet ds = new DataSet();
SqlDataAdapter da = new SqlDataAdapter("select isnull(sum(PA_DAmt),0) from PA_Deposits where PA_UID = @PA_UID", con);
da.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da.Fill(ds,"Dep");
SqlDataAdapter da1 = new SqlDataAdapter("select isnull(sum(PA_EAmt),0) from PA_Expenses where PA_UID = @PA_UID", con);
da1.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da1.Fill(ds,"Exp");
SqlDataAdapter da2 = new SqlDataAdapter("select isnull(sum(PA_IAmt),0) from PA_Income where PA_UID = @PA_UID", con);
da2.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da2.Fill(ds,"Inc");
string deposits = Convert.ToString(ds.Tables["Dep"].Rows[0].ItemArray[0]);
string expenses = Convert.ToString(ds.Tables["Exp"].Rows[0].ItemArray[0]);
string income = Convert.ToString(ds.Tables["Inc"].Rows[0].ItemArray[0]);
GridView1.DataSource = ds;
GridView1.DataBind();
GridView1.Rows[0].Cells[0].Text = "Total";
GridView1.Rows[0].Cells[1].Text = deposits
GridView1.Rows[0].Cells[2].Text = expenses;
GridView1.Rows[0].Cells[3].Text = income;
//The above program was success.
// This is another way I had tried. But failed. I am getting Index out of bound error. Can any solve this if possible to u.
SqlCommand cmd = new SqlCommand("select isnull(sum(PA_DAmt),0) from PA_Deposits where PA_UID = @PA_UID", con);
cmd.Parameters.Add("@PA_UID", SqlDbType.Int).Value = (int)Session["PA_UID"];
GridView1.Rows[0].Cells[1].Text = cmd.ExecuteScalar().ToString();
cmd.CommandText = "select isnull(sum(PA_EAmt),0) from PA_Expenses where PA_UID = @PA_UID";
GridView1.Rows[0].Cells[2].Text = cmd.ExecuteScalar().ToString();
cmd.CommandText = "select isnull(sum(PA_IAmt),0) from PA_Income where PA_UID = @PA_UID";
GridView1.Rows[0].Cells[3].Text = cmd.ExecuteScalar().ToString();
ASPX Code for Grid View
<h2>Account Summary</h2><br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" emptydatatext="There are no data records to display." Width="238px" >
<Columns>
<asp:TemplateField >
<ItemTemplate>
<asp:Label ID="Label1" runat="server" Text="Total"></asp:Label>
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField ><%--HeaderText="Deposits"--%>
<ItemTemplate>
</ItemTemplate>
<HeaderTemplate>
<a href="Deposits.aspx" >Deposits</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
</asp:TemplateField>
<asp:TemplateField >
<HeaderTemplate>
<a href="Expenses.aspx">Expenses</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
<ItemTemplate>
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField >
<HeaderTemplate>
<a href="Income.aspx">Income</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
<ItemTemplate>
<%-- <%# Eval("Course") %>--%>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
Plz solve this.
I will be calling a stored procedure in SQL Server from SSIS. The stored procedure inserts records in a table by accepting input parameters. In the process, it also generates an output parameter that it passes as part of the parameters defined inside the stored procedure. The output parameter value acts as the primary key value for the record inserted using the stored procedure.
How can I call this stored procedure in SSIS? This is just one of the n steps as I will be extracting the output parameter generated by this stored procedure for the succeeding steps.
I know ran across this some time ago when researching some other topic, but I would like to add an option to our stored procedures (which have multiple parameters) so a user could do something like:
EXEC dbo.usp_MyStoredProcedure - EXEC dbo.usp_MyStoredProcedure -?
The result would just list the parameters in the stored procedure and the options available for each parameter/what the parameter was use for.
Here is an example of one stored procedure in use:
CREATE PROCEDURE [dbo].[usp_MyStoredProcedure]
( @BCP INT = 0---- 0 [Default]: No BCP Import, 1: Insert TempBCP Data
, @Debug INT = 0---- 0 [Default]: Run process, 1: Create temp tables, run queries
, @StartDate smalldatetime = '1/1/1900' ---- Enter StartDate; [Default]: otherwise use Max of Invoice date
, @Date INT = 0 ---- 0 [Default]: Use std process (get last Saturday date from @StartDate), 1: Use @StartDate as is
)
WITH EXECUTE AS 'ADBAccount'
AS
BEGIN
....
END
Note: @procName,@strAccount,@intHospital,@patType are passed to this procedure from another procedure
Note: The @procname procedure also takes the above parameters and @outDupCheck as output parameter
DECLARE @sqlStr NVARCHAR(500)
DECLARE @ParmDefinition NVARCHAR(500)
DECLARE @parmINAccount VARCHAR(30),@parmINHospId int , @ParmINpatType varchar(1)
DECLARE @parmRET1 int
SET @parmINAccount = @strAccount
SET @parmINHospId = @intHospital
SET @ParmINpatType = @patType
SET @sqlStr = N'Exec ' + @procName + ' @strAccount,@intHospital,@patType, @outDupCheck OUTPUT'
SET @ParmDefinition=N'@strAccount varchar(50),@intHospital int,@patType varchar(1), @outDupCheck int OUTPUT';
EXECUTE sp_executesql @sqlStr, @ParmDefinition, @strAccount = @parmINAccount, @intHospital=@parmINHospId,@patType=@ParmINpatType,@outDupCheck = @parmRET1
SELECT @parmRET1
--The parameter @parmRET1 returns NULL instead of 1 .
The @procName returns value 1 correctly if I run it separately ( outside of the dynamic sql)
Not sure what is wrong here...
I have a stored procedure that returns XML using FOR XML Explicit. I need to use the output of this procedure in another procedure, and modify the xml output before it is saved somewhere.
Say StoredProc1 is the one returning xml output and StoredProc2 needs to consume the output of StoredProc1
I declared a nvarchar(max) variable and trying to saved the result of StoredProc1
Declare @xml nvarchar(max)
EXEC @xml = StoredProc1 @Id
This doesn't work as expected as @xml doesn't get any value assigned or rather I would say
EXEC @xml = StoredProc1 @Id
outputs the entire xml whereas it should just save the xml in a variable.
Hello,
I want to execute a sproc where the query statement goes something along these lines:
SELECT * FROM myTable WHERE @aVarCharVariable
@aVarCharVariable contains column names and their possible values
How do I achieve this?
Cheers!
/Eskil
Hello,
I am struggling with this, having read many msdn articles and posts I am non the wiser. I have a sproc with an output parameter @regemail. I can call the sproc OK from my code as below, via a tableadapter. And the sproc works as desired from management studio express. I want to get the result returned in the OUTPUT parameter (NOT the Return Value) and place it in a variable. Can anyone advise how I can do this? J.
THE CODE I USE TO CALL THE SPROC
Dim tableAdapter As New DataSet1TableAdapters.RegistrationTableAdaptertableAdapter.SPVerifyUser(strRegGuid, String.Empty)
THE STORED PROCEDURECREATE Proc [prs_VerifyUser
@regid uniqueidentifier,@regemail nvarchar(250) OUTPUT
ASBEGIN
IF EXISTS(SELECT RegEmail from dbo.Registration WHERE RegID = @regid)
BEGIN
SELECT @regemail = RegEmail FROM Registration WHERE RegID = @regid
Return 1
END
Return 2
END
Can we Pass table valued parameters and normal params like integer,varchar etc..to a single stored procedure?
View 1 Replies View Related
I've created a varible timeStamp that I want to feed into a stored procedure but I'm not having any luck. I'm sure its a simple SSIS 101 problem that I can't see or I may be using the wrong syntax
in Execute SQL Task Editor I have
conn type -- ole db
connection -- some server
sql source type -- direct input
sql statement -- exec testStoredProc @timeStamp = ?
if I put a value direclty into the statement it works just fine: exec testStoredProc '02-25-2008'
This is the syntax I found to execute the procedure, I don't udnerstand few things about it.
1. why when I try to run it it changes it to exec testStoredProc @timeStamp = ? with error: EXEC construct or statement is not supported , followed by erro: no value given for one or more requreid parameters.
2. I tired using SQL commands exec testStoredProc @timeStamp and exec testStoredProc timeStamp but nothing happens. Just an error saying unable to convert varchar to datetime
3. Also from SRS I usually have to point the timeStamp to @timeStamp and I dont know how to do that here I thought it was part of the parameter mapping but I can't figure out what the parameter name and parameter size should be; size defaults to -1.
Thank you, please help.
I want to know why this code does not work in a query. The table 'iDay_INTRAD' exists and is detected if I use a statement exec sp_tables iDay_INTRAD. This statement returns one row. The code below returns no rows. Apparently the query is looking for table '@p1' not the value of this variable. Is it possible to do what I want to do in SQL Server?
DECLARE @p1 varchar (10)
DECLARE @p2 varchar(10)
SET @p1 = 'iDay_'
SET @p2 = 'INTRAD'
SET @p1 = @p1 + @p2
exec sp_tables @p1
Thanks
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am calling Store Procedure from my C# Code and inside the SP, I am calling my SSIS Package.It is working fine. On my local because I have all rights to run xp_cmdshell COMMAND. Now I have to transfer this SP to QA and Prod and I don't have rights to run xp_cmdshell COMMAND.
Here is my SP.
declare @cmd varchar(1000)
SET @ssispath = 'SSIS Package Path where my .dtsx package'
set @ExcelF = 'Passing My source file name and full path'
select @cmd = 'C:"program files (x86)""Microsoft SQL Server"100DTSBinnDTEXEC.exe /F "' + @ssispath + '"'
select @cmd = @cmd + ' /X86 /SET Package.Variables[User::ExcelF].Properties[Value];"' + @ExcelF + '" /X86 '
exec master..xp_cmdshell @cmd
My question is, is there other way to run/execute above Store Procedure/SSIS without XP_CMDSHELL Command?
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
create procedure t1 (@var int output)
as
begin
set @var =3
end
declare @var int
execute t1 @var output
print @var
the output is ok
but i need it like
execute t1 @var output i should get value
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
How do I specify a parameter as an output parameter --> OUTPUT paramI am referring to how to do this on line 10 below
1 int GetTheReturnValue=0;2//Code not shown//
9 mySqlCommand.Parameters.Add("@returnParameter", SqlDbType.Int, 10).Value = 0; // How to specify output param?10 GetTheReturnValue=mySqlCommand.ExecuteNonQuery();
Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
View 3 Replies View RelatedGet output of SQL Procedure and assign it to a variable used in WHERE Clause
Later I want to use this variable in my code in the WHERE Clause
Declare @ProjectNo nvarchar(10)
--Now I want to assign it to output of a storedprocedure which returns only 1 value and use it in the below SELECT query.
SELECT ID from TABLEA where Project in (@ProjectNo)
How to do it. How to assign @ProjectNo to output of storedProcedure called 'GetProjNumber'
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedHello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
Hi, i've had this query method:
34 public void AddDagVerslagCategorie(int logID, HistoriekDetail historiekDetail)35 {36 SqlConnection oConn = new SqlConnection(_connectionString);37 string strSql = "Insert into LogDetail (LogID, CategorieID, Inhoud)";38 strSql += "values(@logID, @categorieID, @inhoud)";39 SqlCommand oCmd = new SqlCommand(strSql, oConn);40 oCmd.Parameters.Add(new SqlParameter("@logID", SqlDbType.Int)).Value = logID;41 oCmd.Parameters.Add(new SqlParameter("@categorieID", SqlDbType.Int)).Value = historiekDetail.CategorieID;42 oCmd.Parameters.Add(new SqlParameter("@inhoud", SqlDbType.VarChar, 100)).Value = historiekDetail.Inhoud;43 44 try45 {46 oConn.Open();47 int rowsAffected = oCmd.ExecuteNonQuery();48 if (rowsAffected == 0) throw new ApplicationException("Fout toevoegen historiek detail");49 oCmd.CommandText = "select @@IDENTITY";50 oCmd.Parameters.Clear();51 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();52 }53 catch (Exception ex)54 {55 throw new ApplicationException("Fout toevoegen historiek detail: " + ex.Message);56 }57 finally58 {59 if (oConn.State == ConnectionState.Open) oConn.Close();60 }61 }
which i've converted to a stored procedure: 1 ALTER PROCEDURE [dbo].[insert_DagVerslagDetail]
2 -- Add the parameters for the stored procedure here
3 @dagverslagdetailID int,
4 @logID int,
5 @categorieID int,
6 @inhoud varchar(100)
7 AS
8 BEGIN
9 -- SET NOCOUNT ON added to prevent extra result sets from
10 -- interfering with SELECT statements.
11 SET NOCOUNT ON;
12 SET @dagverslagdetailID = SCOPE_IDENTITY()
13
14 -- Insert statements for procedure here
15 BEGIN TRANSACTION
16 INSERT LogDetail (LogID, CategorieID, Inhoud)
17 VALUES(@logID, @categorieID, @inhoud)
18 COMMIT TRANSACTION
19 END
Now i would like to call that stored procedure in my previous method, so i've changed it to this:
1 public void AddDagVerslagCategorie(int logID, HistoriekDetail historiekDetail)
2 {
3 SqlConnection oConn = new SqlConnection(_connectionString);
4 string strSql = "insert_DagVerslagDetail";
5 strSql += "values(@logID, @categorieID, @inhoud)";
6 SqlCommand oCmd = new SqlCommand(strSql, oConn);
7 oCmd.CommandType = CommandType.StoredProcedure;
8 oCmd.Parameters.Add(new SqlParameter("@logID", SqlDbType.Int)).Value = logID;
9 oCmd.Parameters.Add(new SqlParameter("@categorieID", SqlDbType.Int)).Value = historiekDetail.CategorieID;
10 oCmd.Parameters.Add(new SqlParameter("@inhoud", SqlDbType.VarChar, 100)).Value = historiekDetail.Inhoud;
11
12 try
13 {
14 oConn.Open();
15 int rowsAffected = oCmd.ExecuteNonQuery();
16 if (rowsAffected == 0) throw new ApplicationException("Fout toevoegen historiek detail");
17 oCmd.CommandText = "select @@IDENTITY";
18 oCmd.Parameters.Clear();
19 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();
20 }
21 catch (Exception ex)
22 {
23 throw new ApplicationException("Fout toevoegen historiek detail: " + ex.Message);
24 }
25 finally
26 {
27 if (oConn.State == ConnectionState.Open) oConn.Close();
28 }
29 }
Do i still need the lines 17 oCmd.CommandText = "select @@IDENTITY";
19 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();
Because i've declared the identity in my stored procedure
Hi, I have a stored procedure, and it is expecting an output. If I declared the passing varaible as ref, it compiles fine, but it is not returning any value. If I pass the varaible as out, and add the paramater
MyComm.Parameters.Add(new SqlParameter("@ReturnValue", returnValue)); it gives the following error.
Compiler Error Message: CS0269: Use of unassigned out parameter 'quoteID'.
And if I don't supply the previous statement, the following error occurs.
System.Data.SqlClient.SqlException: Procedure 'CreateData' expects parameter '@ReturnValue', which was not supplied.
How Can I fix this? thanks.
I have a stored procedure that calls a DTS package to grab a text file that has been uploaded to the server and merge it with a table on the database. The DTS package works woderfully in SQL, as does the the file upload. The problem arrises when I create a stored procedure to run the DTS package. I know that you have to shell out and do a command line on the SQL server (and I think that I got the syntax correct) but its calling the Stored Procedure in the ASP.NET app that is causing me hardship. Here is the code that I have so far:
Stored Procedure:
CREATE PROCEDURE spSampleData AS exec master..xp_cmdshell 'dtsrun /SZEUSsqlServer113 /NdtsPackage /UuserID /Ppassword'
GO
VB to run DTS:
Dim myCommand As SqlCommand
myCommand.CommandType = CommandType.StoredProcedure
myCommand.CommandText = "spSampleData"
myCommand.ExecuteNonQuery()
I'm not sure what I am doing wrong but any help would be great.
Thanks!
I am trying to set up a call to a Stored Procedure to do an Insert. Here is my code snippet:
<%@ Page Language="VB" %>
<%@ import Namespace="System" %>
<%@ import Namespace="System.Data.SqlClient" %>
.
.
.
Dim loConn as New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim cmdInsert as New SQLCommand("AdminUser_Insert", loConn)
cmdInsert.CommandType = CommandType.StoredProcedure
Dim InsertForm As New SqlDataAdapter()
InsertForm.InsertCommand = cmdInsert
cmdInsert.Parameters.Add(New SqlParameter("@RETURN_VALUE", SqlDbType.bigint, 8, "Account_Number"))
cmdInsert.Parameters("@RETURN_VALUE").Direction = ParameterDirection.ReturnValue
cmdInsert.Parameters.Add(New SqlParameter("@UserID", SqlDbType.varchar, 50, "UserID"))
cmdInsert.Parameters("@UserID").Value = Request("UserID")
cmdInsert.Parameters.Add(New SqlParameter("@Password", SqlDbType.varchar, 32, "Password"))
cmdInsert.Parameters("@Password").Value = Request("Password")
cmdInsert.Parameters.Add(New SqlParameter("@First_Name", SqlDbType.varchar, 32, "First_Name"))
cmdInsert.Parameters("@First_Name").Value = Request("FirstName")
cmdInsert.Parameters.Add(New SqlParameter("@Middle_Name", SqlDbType.varchar, 32, "Middle_Name"))
cmdInsert.Parameters("@Middle_Name").Value = Request("MiddleName")
cmdInsert.Parameters.Add(New SqlParameter("@Last_Name", SqlDbType.varchar, 32, "Last_Name"))
cmdInsert.Parameters("@Last_Name").Value = Request("LastName")
loConn.Open()
command.ExecuteNonQuery()
loConn.Close()
I get the following error:
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30451: Name 'CommandType' is not declared.
This error happens on the line: cmdInsert.CommandType = CommandType.StoredProcedure
Any help would be appreciated,
Greg
Hello everybody,
How can I call DTS from stored procedure, any help pls.
PS: I appreciate if you please give me an example.
Thank you....
I'm trying to call a job from a stored procedure.
To do so, I've found that sp_start_job is doing just that.
My problem is that the sp_start_job is not in my master
database stored procedures and I don't know how to add it.
I'm working with SQL Server 7 Enterprise without the SP.
Am I looking for the right thing ? (sp_start_job)
Where can I find it ?
Hey, I have a parent SP, and within that parent I want to call a a child what is the code to call that child procedure? or teh easiest way to make that happen?
View 1 Replies View RelatedCan someone tell me a straightforward way to call a VB app (that accepts command line arguments) from a stored procedure.
I have got it to work by using xp_cmdshell, but in practice, the security constraints here prevent using this. Our DBAs don't want to set the proxy account required for a non-sysadmin user to eexecute xp_cmdshell.
I know that writing an extended SP invoking a C++ dll would be the cleanest solution. However I don't have the knowledge to do that.
Any ideas?
Thanks