I am running this on a development server and it fails, OLE DB provider "OraOLEDB.Oracle" for linked server "ZEZASQL" returned message "ORA-01403: no data found".but it runs fine and returns data on production? both servers are SQL Server 2008 R2. Could the version of Oracle have any baring? 11.02.00.01 vs 11.02.00.03
I am trying to get data from an Oracle view using an OLE DB data source and a "SQL Command". When I "preview" the data it looks fine, but when I execute the package I get the following error:
Error: 0xC0202009 at Data Flow Task, CEDAR View [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01403: no data found". Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "CEDAR View" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited. Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Hi. I am stuck with error: An error occurred while receiving data: '64(error not found)'. My Service Broker configuration: Server A initiator, Server B target. Server A sends message to Server B, Server B sends back reply. On this stage I receive problem. Server B message does not come to server A. It stays on sys.transmission_queue on server B. This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B. So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™. But, whenever I send messages after that, everything works fine.
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is: An error occurred while receiving data: '10054(error not found)'.
And on the other side its Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
I have a report that needs to return a count of zero for the rows that have no data, I have tried to use the Left Outer Join but my where clause is excluding the rows with no data and I need to filter the report with the Year, day and Month.
The date filters are from different table(dimDate), not sure how to include them in the #tmpOperationalTypes join as filters
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified] System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35 System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131 System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98 System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.Odbc.OdbcConnection.Open() +37 DBConnection.open() +12 ASP.global_asax.Session_Start(Object sender, EventArgs e) +35 System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182 System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154 System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542 System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection but it work when use SqlClient.Help me solve this problem please. T_T Thanks in advance,
I've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.
I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?
Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.
I have some T-SQL that generates HTML code by using the FOR XML PATH functionality. Once the HTML is built, I am using the following T-SQL to convert it to XML so I am not limited by the output
SELECT @vHTML AS [processing-instruction(x)] FOR XML PATH('')
where @vHTML is varchar(MAX)
Now, when I run my code in VB.NET and use the ExecuteXMLReader() command, I get nothing back into the XML Reader. I noticed that I needed the XMLDATA directive also, but when I add it, I get the following error
Msg 6860, Level 16, State 1, Line 247 FOR XML directive XMLDATA is not allowed with ROOT directive or row tag name specified.
I'm running into the following message, "String or binary data would be truncated. [SQLSTATE 22001] (Error 8152)" when running a sql agent job. I'm attempting to execute a stored procedure through the job. Keep in mind that when I run the stored procedure in a normal query window, it works fine and only fails when running it as a scheduled job. My guess is that it has to do with how SQL Jobs execute procedures (especially long procedures). If I use Set Ansi_Warnings OFF, the job will work fine, however, I don't know what other issues this may cause.
You get the idea. So logproc just logs that the procedure has started or stopped to a table so we can monitor it easily.
The procedure is then run by an agent job every morning. This morning we had a little bit of an odd one. In the example above we effectively got to 'proc3' being started (as it was logged). However there was then an error of String or binary data would be truncated (severity 16 i believe). However when proc3 was then manually run it worked (the data was unchanged). Then going back proc2 works fine, and its actually proc1 that has the error.
I have looked through the procs in question (and the wrapper) and cant find any error handling that is relevent (there one try and catch block completely separate at the end of the wrapper procedure for a small routine).
In my sql statement, I don't have any datatype as INT, when I run it, give me error as 'Arithmetic overflow error converting expression to data type int'.
example : select column1, 2, 3 ..... from (select sum(float) as column1 , ....)
When I hop my cursor on top of column1, it shows (int,null)
I have the following code and i want to passed more than one value:
DECLARE @myvendedor AS varchar(255) SET @myvendedor = '87,30' print @myvendedor SELECT top 10 ECOM.COM1,* from ecom (nolock) WHERE ecom.PORVEND=1 AND ECOM.VENDEDOR IN (@myvendedor) Table Field ECOM.VENDEDOR is Numeric(4,0)
This error occur:
87,30 --Result of PRINT
Msg 8114, Level 16, State 5, Line 6 Error converting data type varchar to numeric.
I change :
DECLARE @myvendedor AS numeric(4,0)
and this error appear:
Msg 8114, Level 16, State 5, Line 2 Error converting data type varchar to numeric.
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine. CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red ELSE '3' --White END END else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
heres my code behind in UploadImage.aspx.vb _____________________________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationImports System.IOPartial Class UploadImage Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Insert into TImage (CategoryName,Picture,MimeType) VALUES (@name,@pic,@type)", conn) 'gi convert and image to byte array Dim data(FileUpload1.PostedFile.ContentLength - 1) As Byte FileUpload1.PostedFile.InputStream.Read(data, 0, FileUpload1.PostedFile.ContentLength) comm.Parameters.Add("name", System.Data.SqlDbType.Text) comm.Parameters("name").Value = System.IO.Path.GetFileName(FileUpload1.PostedFile.FileName).ToLower comm.Parameters.Add("pic", System.Data.SqlDbType.Image) comm.Parameters("pic").Value = data comm.Parameters.Add("type", System.Data.SqlDbType.NChar) comm.Parameters("type").Value = FileUpload1.PostedFile.ContentType If FileUpload1.HasFile = True Then Try conn.Open() comm.ExecuteScalar() Label1.Text = "Successfully uploaded" conn.Close() Finally End Try End If End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load End Sub Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button2.Click Server.Transfer("image.aspx") End SubEnd Class______________________________________________________________________________________________________________________________then here my code behind in Image.aspx.vb________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationPartial Class image Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String Dim reader As SqlDataReader Dim dataBuffer() As Byte connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Select * from TImage where no = @no", conn) comm.Parameters.Add("no", System.Data.SqlDbType.Int) comm.Parameters("no").Value = 5 conn.Open() reader = comm.ExecuteReader reader.Read() Response.Clear() Response.AddHeader("Content-type", reader("CategoryName")) Response.AddHeader("Content-type", reader("MimeType")) Dim blen As Integer = CType(reader("picture"), Byte()).Length dataBuffer = reader("Picture") Response.OutputStream.Write(dataBuffer, 0, blen) Response.Close() conn.Close() End SubEnd Class_____________________________________________________________________________________________________________________ When I am going to call the Image.aspx it always prompt this error:XML Parsing Error: no element foundLocation: http://localhost:4730/tesdaweb/UploadImage.aspxLine Number 1, Column 1:Is there something wrong in my codes... Please helpthanks...
when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
we have a active/passive cluster server with SQL server 2005 SP2 installed. i have found the following error messages in event viewer application log for MSSQLServer:
1) [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed. 2) [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]TCP Provider: An existing connection was forcibly closed by the remote host. 3) [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]Communication link failure 4) [sqsrvres] OnlineThread: QP is not online.
can any one pls help me finding out the solutions. Thanks in Adv, Praneetha.:)
when i try to execute the package i keep getting an error like below even though all the connections in the connection manager is working fine.. how can I resolve thsi problem?
Error: 0xC001000E at : The connection "{616CB160-84E6-4A65-B362-4F2B1D1767F9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error: 0xC001000E at : The connection "{B593900A-434B-4A7A-9AF1-CC248A22D106}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error: 0xC001000E at : The connection "{616CB160-84E6-4A65-B362-4F2B1D1767F9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
when i try to make backup in location different sql server express 's default location for making backup device it tackes an error
TITLE: Microsoft SQL Server Management Studio Express ------------------------------
Backup failed for Server 'PDSTUDIOSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
System.Data.SqlClient.SqlError: Cannot open backup device 'SQLEXPRESS2005(D:My DocumentsVisual Studio 2005DataBasesBackupSQLEXPRESS2005.bak)'. Operating system error 5(error not found). (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------ And this is my code for making backup
USE master GO
EXEC master.dbo.sp_addumpdevice @devtype = N'disk', @logicalname = N'SQLEXPRESS2005', @physicalname = N'D:My DocumentsVisual Studio 2005DataBasesBackupSQLEXPRESS2005.bak' GO Server : SQL Server 2005 Express Edition
lately I had the following message on win2000 sp4 with sqlserver2000 sp3a: "DTS Designer Error - Specified file not found". Then in the DTS editor the Task menu objects are missing and it is not possible to link a source and a target using Transform Data Task.
Before it used to work fine.
I have done the following:
- installing again last sp: same issue again - reinstalling sqserver with a registry deep cleaning: same issue again - started disabled windows services: same issue again
any idea?
Carsten
edit: Could it be possible that a lately installed fix for Win2K interferes with DTS-Designer?
Does anyone know what this error means and how to resolve it? I get this error when I attempt to run a Data Flow Task. The Data Flow Task has one subcomponent, a Flat File Source. I have set up the connection manager to access the flat file, which is on a local directory. I have tried everything to fix this. What could possibly be the problem??
Thanks
Error: 0xC001000E at : The connection "{B9E11DD7-21A1-4FD7-986F-6BDC5B81F51D}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
as Christopher Yager say in "Need distributed service broker sample", I also test sending messages between two SQL Server 2005 instances,and after I setup the test environment with instance1 and instance2,I find queue [q2] in ssb2 can't receive message from ssb1. when I query by "select * from sys.transmission_queue",I get some message records that transmission_status is "64(error not found)".
Error: 0xC001000E at : The connection "" is not found.
when executing Control Flow tasks. However the tasks still completes successfully (Execute SQL or DataFlow tasks), and the Control Flow box turns green in the usual fashion.
However if I try to execute all of the Control Flows (using the green Debug arrow), nothing will execute as I get a Package Validation error, with the same error message.
Any ideas why this might be occurring? All of my connection managers look to be set up correctly
I was requested to build and move and existing SSIS package from the developers local PC to the Dev server. Both are running SQL 2K5, I built the following command file so SQL Agent can run the import job.
REM *** Run for FileImport set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig "C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigFileImportFileImportLoadData.dtsx"
All files are in the proper place but when the jobs runs the following message shows up in the history;
Message Executed as user: LIGHTHOUSE1SQLEXEC. ...system32>set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig C:WINDOWSsystem32>"C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigDEVFileImportLoadData.dtsx"Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:54:00 AM Warning: 2008-05-08 08:54:01.77 Code: 0x80012014 Source: FileImportLoadData Description: The configuration file "FileImportLoadData.dtsConfig" cannot be found. Check the directory and file name. End Warning Warning: 2008-05-08 08:54:01.77 Code: 0x80012059 Source: FileImportLoadData Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Progress: 2008-05-08 08:54:01.82 Source... Process Exit Code 0. The step succeeded.
My questions is how do I fix this and is this really and error?
I have created a FTP task that logs into FTP server and receives files and scheduled it to run every 15min. However, it fails when there are no files on FTP. How would I check the if files exist? How can I catch the FTP task error and compare it to Hresults.NoFilesFound in a script task?
Hi there, I am trying to use the new ListView control in VS2008 in an ASP.Net app. My problem starts already with the datasource. I drag and drop a SqlDataSource and select Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5) I can connect to the database and test the query in the wizard (I do not need to use a password??) This is the webconfig entry <add name="ConnectionString" connectionString="Data Source=C:Program FilesMicrosoft SQL Server Compact Editionv3.5SamplesNorthwind.sdf" providerName="Microsoft.SqlServerCe.Client.3.5"/> I add the following line in the page load event AppDomain.CurrentDomain.SetData("SQLServerCompactEditionUnderWebHosting", true); However I get the error message that the data provider cannot be found and it might not be installed. I added the reference and also gave the folder above ASP.NET full access rights. Anyone else encountered this problem. It is quiet strange? Thanks a lot for your help. Cheers, Chris
