I have a table with code and description as below
create table isin_code
(
code varchar(5),
code_desc varchar(255)
)
go
insert into isin_code values ('aaa','aäsas')
go
insert into isin_code values ('aaa','asâ•šas')
go
insert into isin_code values ('aaa','aâsas')
go
insert into isin_code values ('aaa','asas')
go
I want to identify the list of alt codes available in the table.
I would like to find all Special Characters in a table. I am currently using the code below. Not sure if this gets all of them.
select top 50 *
from [dbo].[SV20150122]
where street LIKE '%[^0-9a-zA-Z @.-]%'
I am using SQL Server 2008. In one of my table, one column has values like
"MFY RLHH CSQÉ"
"Aamj Gxmolwn Slf Yytrzgan Hiwd Fnlmyw"
So to fetch the data having only special characters in it, I used below query
Select * From Table Where Column Like '%[^0-9a-zA-Z]%' Escape ' '. Its returning both the records. Here I would like to fetch records for those Unicode characters only which are not within 00201 - 0070E [URL].
I want to create a function that searches for allowed characters within a table range (that contains the allowed characters) and replace any characters outside this range with a space.
For example -
'Bill123?', 'Jones12.z-'
'John&12/', 'QWERT123&4'
Wanted results – the single quotes are there to show the space for the replaced characters.
'Bill123 '
'Jones12.z '
'John&12 '
'QWERT123 4'
Example SQL data
CREATE TABLE [Common].[AllowedCharacters] (
[Character] [varchar](1) NOT NULL,
[Replacement] [varchar](10) NULL,
[AlwaysInclude] [bit] NOT NULL)
GO
SET ANSI_PADDING OFF
[code]....
The function will wrap around the column names and I know it can be done without a table validate the characters but it must be done this way.
There is a table [Formula_Calc] with formula calculations that need to be replaced with relevant values based on another table [Totals]
[Totals]
RowNo|Total
F1|240
F2|160
F3|180
F11|1000
F12|1500
F13|2000
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16.
Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100);
DECLARE @Total NVARCHAR(100);
SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total)
FROM [Totals]
SET @Total='select '+@formula
EXECUTE sp_executesql @Total;
PRINT @Total;
i made a procedure to the below output now i need to add column percentage depends on these output
block Response Heads Dept Actuals
1Sales Sales01.Sales (net of Sales Tax)1087.5999999999999
1Finance Sales02.LESS:-EXCISE DUTY 22.800000000000001
1Sales Sales03.Net Sales 1064.8
2HR HR 04.Personnel Cost 170.60000000000002
3Materials & productionCOGS 05.Material Cost 376.70000000000005
(.i.e)
block Response Heads Dept Actuals percentage
2HR HR 04.Personnel Cost 170.60 170.60*100/1064.8(dept=03.Net
Sales)
3Materials & productionCOGS 05.Material Cost 376.70 376.70*100/1064.8(dept=03.Net
Sales)
How to write make a query for that?
I want to find previous date from selected date. below is the sample data.
DECLARE @StartDate SMALLDATETIME = '1/11/2016'
declare @tempdat table(repdate smalldatetime)
insert into @tempdat values ('10/26/2015')
insert into @tempdat values ('10/29/2015')
insert into @tempdat values ('11/1/2015')
insert into @tempdat values ('11/27/2015')
insert into @tempdat values ('11/25/2015')
insert into @tempdat values ('11/20/2015')
insert into @tempdat values ('11/10/2015')
insert into @tempdat values ('11/10/2015')
insert into @tempdat values ('11/11/2015')
insert into @tempdat values ('11/11/2015')
Now if i pass the date '10/26/2015' then i want select prev date of passed date. in this example no prev date is available, so result set would be nothing.
if i pass the date '11/10/2015' then result should be '11/1/2015' which is prev small date available in table.
I have a table with data in two columns, item and system. I am trying to accomplish is we want to compare if an item exists in 1, 2 or all systems. If it exists, show item under that system's column, and display NULL in the other columns.
I have aSQL Fiddle that will allow you to visualize the schema.
The closest I've come to solving this is a SQL pivot, however, this is dependent on me knowing the name of the items, which I won't in a real life scenario.
select [system 1], [system 2], [system 3]
from
(
SELECT distinct system, item FROM test
where item = 'item 1'
) x
pivot
(
max(item)
[Code]...
How can i find the primary field name and primary table name of a given foreign key.
For example
Table A:
IDa
Column1
Column2
Column3
Table B:
IDb
column1
column2
column3 <---- this is foreign key to table A's IDa
What i want to do is i pass input of tableB, column3 and i get name of Primary tableA and field name IDa. How is it possible to do in tsql ?
Does anyone know how to query a field in a table where it contains anASCII code >= 128 - without looping through every field for everyrecord in table (using charindex)?Ex of char I would like to find: ü which is char(252)
View 1 Replies View RelatedBelow is sample SQL:
SQL_1: Creates a database
SQL_2: Creates 2 stored procedures
Now, I need to search database SP`s for Table2 t2 ON t2.CID = t1.CID and ALTER them with Table2 t2 ON t2.CID = t1.CID.
INNER JOIN Table3 t3 ON t3.CID = t1.CID
WHERE CustGroup = 'Employees'SQL_1:
USE [master]
GO
[code]...
Hi Experts,
I have to find the latest file in a folder and export data to a table in sql server.
The code should be something that has to be incorporated into a t-sql stored procedure.
The file name would for example abc_defYYYYMMDD.xls.
would i be able to find the latest file in the folder using the the datestamp (YYYYMMDD) in the filename.
Please note i would have files in other format and names with datestamp attached to it, so the code has to pick specific file for which the file name starts with 'abc_def'
and export data to a table.
Any help would be highly appreciated
In my application I must store over 16000 character in a sql table field . When I split into more than 1 field it gives "unclosed quotation mark" message.
How can I store over 16000 characters to sql table field (only one field) with language specific characters?
Thanks
easy way to extract a substring that is between 2 characters?
Example string: 123n_abcn_123n
The substrings before and after the underscores can be any length.
My objective is to be able to extract the "abcn" from a column of values.
I am working with a large amount of text data in a single column. I am in the process of pumping that column of data into a delimited text file. The data in the column has new line characters that I need to remove. I need to data to be in a single line in the text file.
So far the things that I have tried are not working. What I try for removing the new line characters?
I have a table of data with lines of various lengths. An example is
A Smith - Give #12345# Sydney City
B Jones and S Jones - Give #876543# Washington
I am trying to work out how to create a new column with just the number between the # symbols. The number would be between 5 and 9 numbers.
best possible way to remove all the characters after a 3rd repetition of a character?
For Example:
I want 10.0.1600.22 to be 10.0.1600
Everything after and including the '.' to be removed.
I understand Substring_Index() is not available whats the other options?
I want to remove special characters from a string in sql like <?> in a column value in a table.
View 1 Replies View RelatedI am trying to replace all special characters in a column with one special character.
Example:
Table: dbo.Employee
Column: Name
Name
-------
edwardneuman!"<]
mikemoreno)'>$:
JeffJensen"?>"
I am trying to get the namepart to the left of ANY special character. To achieve this, I am thinking of replacing all the special characters with a single special character so that I can find the first occurrence of that special character and grab left of the special character (SUBSTRING/CHARINDEX). This way I don't need to loop through all the special characters.
I am expecting the following results:
Name
-------
edwardneuman<<<<
mikemoreno<<<<<
JeffJensen<<<<
I have data like ABC_Tablename_12345, i just want everything before and after _ also if there is no underscore in the name just return the name.
View 2 Replies View Relatedi need to find and all special characters and replace with space.
Following query works well for me to finding all rows having special char.
SELECT DESC FROM TBL_DESC
WHERE DESC LIKE '%[^A-Z0-9 ]%'
replacing special char with space . i need to remove special chars only.
Hello i constructed the following query in SQL management studio and it runs fine, exactly how i want it to. However when i run it in my code behind i get the error: 'Too many characters in character literal'
I desperatly need to use this query exactly how it displays in the mangement tool - why wont it work the same in my code behind?
(I am using c# in my code behind and binding the results of the query to a gridview)
Regards
"SELECT DISTINCT (dbo.AuthorList(publicationID))+ ';' + ISNULL(' Editor: '+Publication.editor, '')+ '' + ISNULL(' "'+Publication.title+'"', '')+ '' + ISNULL(' Book: "'+Publication.booktitle+'"', '')+ '' + ISNULL(' '+Publication.type, '')+ '' + ISNULL(' '+Publication.journal, '')+ '' + ISNULL(' Series: '+Publication.series+'.', '')+ '' + ISNULL(' '+Publication.school, '')+ '' + ISNULL(' '+Publication.institution, '')+ '' + ISNULL(' '+Publication.organisation, '')+ '' + ISNULL(' '+Publication.month, '')+ '' + ISNULL(' ('+convert(nvarchar, Publication.year)+')', '')+ '' + ISNULL(' '+Publication.publisher, '')+ '' + ISNULL(' '+Publication.address+'.', '')+ '' + ISNULL(' '+Publication.howpublished, '')+ '' + ISNULL(' Ed: '+convert(nvarchar, Publication.edition)+'.', '')+ '' + ISNULL(' '+Publication.note, '')+ '' + ISNULL(' Vol:'+Publication.volume+'.', '')+ '' + ISNULL(' No:'+Publication.number+'.', '')+ '' + ISNULL(' Pages:'+Publication.pages+'.', '')+ '' + ISNULL(' Chapter:'+Publication.chapter+'.', '') AS SingleColumn, Publication.publicationID FROM Publication;"
Hi,
I am tryin to run an SSIS package from an Excel Spreadsheet to MS SQL Server 2005.
I receive the error: Text was truncated or one or more characters had no match in the target code page (full report is below).
I found this thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2562259&SiteID=1
and have set the destination column to nvarchar(max), and I have also set the TruncationRowDisposition = RD_IgnoreFailure on the destination column, with no luck.
Any ideas? Thanks!
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
- Prepare for Execute (Success)
- Pre-execute (Success)
- Executing (Success)
- Copying to [cisense_new].[dbo].[_Details] (Error)
Messages
Error 0xc020901c: Data Flow Task: There was an error with output column "Name" (66) on output "Excel Source Output" (60). The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
Error 0xc020902a: Data Flow Task: The "output column "Name" (66)" failed because truncation occurred, and the truncation row disposition on "output column "Name" (66)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source 1 - owners$" (52) returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread1" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)
Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)
Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source 2 - trademarks$" (128) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - details$" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
- Copying to [cisense_new].[dbo].[_Owners] (Stopped)
- Copying to [cisense_new].[dbo].[_Trademarks] (Stopped)
- Post-execute (Success)
Messages
Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.
(SQL Server Import and Export Wizard)
Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.
(SQL Server Import and Export Wizard)
Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.
(SQL Server Import and Export Wizard)
Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.
(SQL Server Import and Export Wizard)
Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.
(SQL Server Import and Export Wizard)
Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.
(SQL Server Import and Export Wizard)
- Cleanup (Success)
Messages
Information 0x4004300b: Data Flow Task: "component "Destination - _Details" (26)" wrote 14454 rows.
(SQL Server Import and Export Wizard)
Information 0x4004300b: Data Flow Task: "component "Destination 1 - _Owners" (92)" wrote 13304 rows.
(SQL Server Import and Export Wizard)
Information 0x4004300b: Data Flow Task: "component "Destination 2 - _Trademarks" (186)" wrote 10005 rows.
(SQL Server Import and Export Wizard)
Hi,
I have tried to extract data from Pervasive SQL into MS SQL Server using DTS. Due to the server has been set as Chinese language region, the MS SQL is also set as 'Chines_PRC_CI_AS' by default. After the successful extraction and transfer, I have exported the data out to Excel format. Due to different location, I have copy and transfer the data into another reporting server which is having MS SQL 2005.
When trying to import the data into the server, it prompted an error '[Data Conversion 1 [168]] Error: Data conversion failed while converting column "DESC" (166) to column "Copy of DESC" (187). The conversion returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". '. After checking and finding, I found it was due to the chinese characters that are contained inside the data files.
I have tried to change the collation setting inside MS SQL 2005 with the same setting as the MS SQL 2000, but it still not working. Please help and advice.
Thank you and cheers.
Best regards,
Francis
I'm trying to import data in Excel into SQL Server table which you would think would be an absolute doddle seeing as they're both key Microsoft products in the BI family..One of the columns in Excel spreadsheet is Comments1 and a couple of the values in this column are over 300 characters in length yet when I set up the Excel source and then open Advanced Editor and look at Input and output properties this column has a data-type of Unicode string [DT_WSTR] with length of 255 which leads to the truncated error in the title.
I've researched this and on find going into the registry and updating the TypeGuessRows value from 8 to zero. I've done this and yet the data-type is still showing as Unicode string [DT_WSTR] with length of 255. I've even moved the row with the largest number of characters to the top of the spreadsheet and changed the TypeGuessRows value to 1 but the data-type still stays the same.I can't believe that it's soooo difficult to import data from one of Microsoft's key BI applications to another using their 'world-class' integration tool.
I need to find all uses of special characters in a database. I used the following code to do this:
USE dbName
GO
IF OBJECT_ID('tempdb.dbo.#Results') IS NOT NULL DROP TABLE #Results
GO
[code]...
This will check all tables in the database, but if you want to check specific tables you can uncomment the line in the where clause and specify tables to be checked. The query will return any text fields that have any characters other than letters, numbers or spaces.
This code works fine for me because all the tables in my database have single column primary keys. However I know how much Jeff Moden hates cursors or RBAR queries, so my question is could this have been done by any method other than using a cursor?
Within a trigger, is there a way to get the trigger's name programmatically? Like a "Me.Name" type of construct? Access to a call stack would also work as well.
View 7 Replies View RelatedI’m getting ASCII characters in one column of my table. So I want to replace same column value in NON ASCII characters.
Note – values in column must be same
I have a Transactional table containing IDs that relate to each other. The table highlights the transactions that move one ID to another, by storing an ID and a IDNew (Basically from ID to ID).
My requirement is to create a Inline Table Valued Function that will efficiently return a single ID column to show all related IDs by looking at the ID and the IDNew fields.
I need to pass in a single ID to get all relations or a list of IDs through xml.
I have managed to achieve this by making use of two recursive cte's and then combining the results with union statements to create a distinct list of values.
IF OBJECT_ID (N'tempdb..#Trans', N'U') IS NOT NULL
BEGIN
DROP TABLE #Trans
END
CREATE TABLE #Trans
(
TranID int identity(1,1),
[code]....
i wanna create a procedure for P& L cost sheet , i had done that procedure now include a cursor instead of replacing sql queries .
create procedure pl_test
@fmdate datetime,
@todate datetime,
@categ varchar(2000)
begin
create table #temp
[code]....
how to include cursor on if part and else part
I have this data as below. I need to find out the combination from the data and take a count of them
CREATE TABLE A
( nRef INT,
nOrd INT,
Token INT,
nML INT,
nNode INT,
sSymbol VARCHAR(50),
[code].....
if you can see, the rows with column nRefNo 1 and 3 are same i.e. with same combination of Symbol viz. Silver and Castorseed.
Hence the desired output will be
Symbol Count
Castorseed-Silver 8
How to get this combination together and then take count of them. Please note i will be dealing with more than 5 million rows.
hi,
when i tried to run the following code , the code keeps on running without creating the required table...............
pls can anyone help me to figure out the problem........
waiting for your replies...
int row_head = 3;
int col_head = 3;
TextBox[] columns1=new TextBox[5];
TextBox[] rows = new TextBox[2];
for (int i = 0; i < 3; i++)
columns1[ i ] = new TextBox();
for (int i = 0; i < 2; i++)
rows[ i ] = new TextBox();
columns1[0].Text = "col1";
columns1[1].Text = "col2";
columns1[2].Text = "col3";
rows[0].Text = "rowh1";
rows[1].Text = "rowh2";
String[] description=new string[10];
for (int k = 0; k < 10; k++)
description[k] = k.ToString();
int index_value = 0;
int des_index = 0;
string datatype = "";
string command = "";
SqlConnection sqlCN = new SqlConnection(connectionString);
for (int i = 0; i < col_head + 1; i++)
{
if (i == 0)
datatype += "(col " + i + " varchar(20),";
else if (i + 1 == col_head+1)
datatype += "col" + i + " varchar(20))";
else
datatype += "col" + i + " varchar(20),";
}
MessageBox.Show(datatype);
MessageBox.Show("create table " + textBox1.Text + " " + datatype);
string selectCommandText = "create table " + textBox1.Text +datatype;
MessageBox.Show("executed");
try
{
SqlCommand sqlCmd = new SqlCommand(selectCommandText, sqlCN);
sqlCN.Open();
MessageBox.Show("open ");
// the following command is not executed.....
sqlCmd.ExecuteNonQuery();
MessageBox.Show("open and execu");
for (int i = 0; i < row_head + 1; i++)
{
command="";
if (i == 0)
{
command="' ',";
for(int j=0;j<col_head;j++)
{
if(j+1==col_head)
command+="'"+columns1[j].Text+"'";
else
command+="'"+columns1[j].Text+"',";
}
}
else
{
command = "'"+rows[index_value++].Text+"',";
for (int j = des_index; j < des_index + col_head; j++)
{
if (j +1== des_index+col_head)
command += "'" + description[j] + "'";
else
command += "'" + description[j] + "',";
}
des_index = des_index + col_head;
}
MessageBox.Show("INSERT INTO " + textBox1.Text + " values(" + command + ")");
sqlCmd.CommandText = "INSERT INTO " + textBox1.Text + " values("+command+")";
sqlCmd.ExecuteNonQuery();
}
MessageBox.Show("fini");
selectCommandText = "SELECT * FROM " + textBox1.Text;
sqlCmd = new SqlCommand(selectCommandText, sqlCN);
sqlCmd.ExecuteNonQuery();
SqlDataAdapter sqlDA = new SqlDataAdapter(selectCommandText, sqlCN);
DataSet DS = new DataSet();
sqlDA.Fill(DS);
MessageBox.Show("fini 2");
DataGridView1.DataSource = DS.Tables[0].DefaultView;
}
catch (Exception eio)
{ }}
Sweety
Dear Friends,
I am having 2 Tables.
Table 1: AddressBook
Fields --> User Name, Address, CountryCode
Table 2: Country
Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Thanks in advance.
Regards
Ramakrishnan
Singapore
28 March 2007