I want to find previous date from selected date. below is the sample data.
DECLARE @StartDate SMALLDATETIME = '1/11/2016'
declare @tempdat table(repdate smalldatetime)
insert into @tempdat values ('10/26/2015')
insert into @tempdat values ('10/29/2015')
insert into @tempdat values ('11/1/2015')
insert into @tempdat values ('11/27/2015')
insert into @tempdat values ('11/25/2015')
insert into @tempdat values ('11/20/2015')
insert into @tempdat values ('11/10/2015')
insert into @tempdat values ('11/10/2015')
insert into @tempdat values ('11/11/2015')
insert into @tempdat values ('11/11/2015')
Now if i pass the date '10/26/2015' then i want select prev date of passed date. in this example no prev date is available, so result set would be nothing.
if i pass the date '11/10/2015' then result should be '11/1/2015' which is prev small date available in table.
Let's say the first row returned has StartDate = 1/1/2014 and EndDate is 1/2/2014. The next row I want the StartDate to equal the previous row EndDate so it would be 1/2/2014 as StartDate. This compounds every row basically the third row StartDate would be the second row EndDate. All in one select statement if it can be done. Using SQL2008r2.
How do I get first day of last month of previous quarter from today's date? I know my question is little confusing. I need to get 06/01/2014 using t-sql.
I am working in sqlserver 2008 R2 and below is my sample research query. I am trying to get previous 6 months data.
WITH CutomMonths AS ( SELECT UPPER(convert(VARCHAR(3), datename(month, DATEADD(MM, DATEDIFF(MM, 0, GETDATE()) - N, 0)))) Month ,DATEADD(MM, DATEDIFF(MM, 0, GETDATE()) - N, 0) startdate ,DATEADD(MM, DATEDIFF(MM, 0, GETDATE()) - N + 1, 0) enddate FROM ( VALUES (1)
[Code] ...
Current output what i am getting:
Expected Output:
I found why the April month i didn't get the $20 because the startdate of my perks CTE '2014-04-03'. If it is '2014-04-01' then i will get the expected output.
But i should not change the the date on perks. How to neglect this date issue and consider the month instead to get the expected output.
I've SSRS sales report to which I need to pass the dates for previous month's start date and end date which I am able to pass using below code. However, since the sales report has data from the past year(2014) I need to pass the dates for last year as well. The below code gives StartDate1 as 2015-02-01 and EndDate1 as 2015-02-28. I need to get the dates for past year like 2014-02-01 as StartDate2 and 2014-02-28 as EndDate2
SELECT DATEADD(MONTH, DATEDIFF(MONTH, '19000201', GETDATE()), '19000101') AS StartDate1, DATEADD(MONTH, DATEDIFF(MONTH, '19000101', GETDATE()), '18991231') AS EndDate1
My goal is to update the "PriorInsert" field with the "DateInserted" from the previously inserted record where the WorkOrder, MachineNo, and Operator are all in the same group.
While trying to get to the correct previous record, I wrote the query below.
P.S. The attached .txt file includes a create and insert tbl_tmp sampling.
select top 1 a.ID, a.WorkOrder, a.MachineNo, a.Operator, a.PriorInsert,
I have a table with score info for each group, and the table also contains historical data, I need to get the ranking for the current week and previous week, here is what I did and the result is apparently wrong:
select CurRank = row_number() OVER (ORDER BY cr.CurScore desc) , cr.group_name,cr.CurScore , lastWeek.PreRank, lastWeek.group_name,lastWeek.PreScore from (select group_name, Avg(case when datediff(day, asAtDate, getdate()) <= 7 then sumscore else 0 end) as CurScore
[Code] ....
The query consists two parts: from current week and previous week respectively. Each part returns correct result, the final merged result is wrong.
I would like to return the nearest date of Table B in my table like for
ID W001 in table B should return ID A002 CreatedDatetime: 2014-06-03 20:05:48.000 ID W002 in table B should return ID A004 CreatedDatetime: 2014-06-04 01:05:48.000
create table isin_code ( code varchar(5), code_desc varchar(255) ) go insert into isin_code values ('aaa','aäsas') go insert into isin_code values ('aaa','as╚as') go insert into isin_code values ('aaa','aâsas') go insert into isin_code values ('aaa','asas') go
I want to identify the list of alt codes available in the table.
I have a table with data in two columns, item and system. I am trying to accomplish is we want to compare if an item exists in 1, 2 or all systems. If it exists, show item under that system's column, and display NULL in the other columns.
I have aSQL Fiddle that will allow you to visualize the schema.
The closest I've come to solving this is a SQL pivot, however, this is dependent on me knowing the name of the items, which I won't in a real life scenario.
select [system 1], [system 2], [system 3] from ( SELECT distinct system, item FROM test where item = 'item 1' ) x pivot ( max(item)
I am trying to code a rule at the moment which sets a value based on the value of the previous row. This is as far as I have got so far. I am trying to run it as a set based command and I believe I may need to make use of a numbers table.
Anyway the code is....
declare @data table (ID int identity(1,1), DeviceID int, EventTypeID int, EventID int)
[Code] ....
So the output is currently incorrect. Each DeviceID needs to have a ID assigned to the MIN(ID) which isn't yet in the code above. This ID has to be sequential across the full table and not dependent on ID.
Next the rule is coded in the case statement above.
So for each DeviceID, when the EventType goes from 1, 2 or 4, to 0 or 3, the following record after the 0 or 3 will have a new EventID. And conversely when the EventType goes from 0 or 3 to 1,2, or 4, the record that is the 1, 2 or 4 will have a new EventID.
Table Master --------------------------- EmpID EffectiveDateFr Group 00001 1/1/2014 A 00001 1/5/2014 B 00001 1/9/2014 C 00001 2/1/2014 B 00001 2/20/2014 A ....
I want to create query the output should be:
EmpID TransDate Group 00001 1/1/2014 A 00001 1/2/2014 A 00001 1/3/2104 A 00001 1/4/2014 A 00001 1/5/2014 B 00001 1/6/2014 B 00001 1/15/2014 C 00001 2/1/2014 B 00001 2/2/2014 B 00001 2/20/2004 A
I need building the dynamic sql . When I create below script and executed the procedure passing the table name and date values its giving me error saying "Incorrect syntax near '>'".
Create PROCEDURE sampleprocedure @tablename AS VARCHAR(4000), @date as date AS BEGIN declare @table varchar(1000)
I am novice to intermediate writer of T-SQL. Here is my current Query:
SELECT [FISCALYEAR], [ACCTPERIOD], SUM([ACTIVITYDEBIT]) AS TrialBalanceDebit, [POSTINGTYPE] FROM [dbo].[TB_Lookup] WHERE [POSTINGTYPE]='Profit & Loss' GROUP BY [FISCALYEAR],[ACCTPERIOD], [POSTINGTYPE] ORDER BY acctperiod ASCand this is what is produces.
FISCALYEARACCTPERIODTrialBalanceDebitPOSTINGTYPE 2014 201401 282361372.13000 Profit & Loss 2014 201402 227246272.86000 Profit & Loss 2014 201403 315489534.33000 Profit & Loss 2014 201404 287423793.76150 Profit & Loss 2014 201405 256521290.76000 Profit & Loss 2014 201406 65582951.30000 Profit & Loss
Now I need a way to add another field that takes the TrialBalanceDebit from current ACCTPERIOD and adds it to the Previous ACCTPERIOD TrialBalanceDebit.
Now i want to compare Result and dislay prevterm where student fail:
Now my output would be as: Now I want to compare latest term i.e. Term5 with prev Terms and if found Mismatch in result then i want to display as below:
I've tried all sorts of code i.e. cross apply, running totals, etc. Cannot get this to work. I am trying to add a previous row value but only doing it for each group.
I would like to set the start time of the next row to be equal to the previous row time + duration. I know the start time of each group of 'Items' when the 'Sequence' number = 1. The last 'duration' value in the group would be ignored.
INSERT #Databases EXEC ('EXEC sp_databases'); SELECT@@SERVERNAME AS SERVER_NAME, DATABASE_NAME, DATABASE_SIZE AS 'KB', ROUND(DATABASE_SIZE / 1024, 2) AS 'MB', ROUND((DATABASE_SIZE / 1024) / 1024, 2) AS 'GB', CONVERT(date, getdate()) AS Date FROM #databases
On a webform, I have three button ... [7 days] [15 days] [30 days]When the user clicks one of the buttons, I want to return their orders for the past X days. The WHERE clause would include something like this (for 7 days):WHERE (Order_Date BETWEEN CONVERT(DATETIME, GETDATE() - 7, 102) AND CONVERT(DATETIME, GETDATE(), 102))How do I parameterize the number of days?Thanks,Tim
Query1: SELECT TOP 5 A,B,C from Table1 where A > 10 or B < 10
Query2: SELECT @@rowcount
After 'Query1' if 'Query2' is executed will return 5.
But how to get the total resultset number of rows for 'Query1' (without TOP) by executing the 'Query2' or others. The above option is available in mysql.
I am working on a rewards program and I have a table whenever customer completes a trip, his total fare,business points earned for that particular trip and respective Promotional points gets inserted.
Now I have a scenario whenever customer business points accumulates to 10 then need to award 3 promotional points.
If Business Points=14 for a single trip then for the first 10 points respective Promo points will be awarded and the remaining 4 points should get carry forward for the next trip and this 4 points should get accumulated with the next trip Business Points and so on.
Basically need to check for every 10 Business points accumulated award some Promo points and carry forward remaining points.
Here is the sample table structure and data :
CREATE TABLE [dbo].[tblRedeems] ( [Mobileno] [varchar](50) NOT NULL, [TripNo] [int] NOT NULL, [CustomerName] [varchar](50) NULL, [TripEndTime] DATETIME NOT NULL,
