T-SQL (SS2K8) :: First And Last Day Prior Month As Input Parameters
Apr 16, 2014
I have to create a report and I want all activity for the previous month.
I need to calculate the First and Last Day Prior Month to be used as Input Parameters.
Would something like this be the case or is there a better solution?
[code="sql"]
SELECT DATEADD(month, DATEDIFF(month, -1, getdate()) - 2, 0) as FirstDayPreviousMonthWithTimeStamp,
DATEADD(ss, -1, DATEADD(month, DATEDIFF(month, 0, getdate()), 0)) as LastDayPreviousMonthWithTimeStamp
[/code]
I was thinking get the first day of the previous and current month to exclude the Timestamp and use a less then first day of current month?
View 3 Replies
ADVERTISEMENT
Jul 8, 2015
My overall problem is to do some string manipulation and then DATEADD, but I still don't know why I getting what SQL is giving me.
To get the prior month, I use the following code;
SELECT
(
SELECT
RIGHT('00' + CAST(
CASE CAST(RIGHT(MAX(Eff_Period), 2) AS int) - 1
WHEN 0 THEN 12
ELSE CAST(RIGHT(MAX(Eff_Period), 2) AS int) - 1
END AS varchar(2)), 2)
)--, -- Month
--CAST(CAST(LEFT(MAX(Eff_Period), 4) AS int) - 1 AS varchar(4)) -- Year
FROM
Current_Membership;
This correctly gives me the proper month number for the prior month, in this case, '06' since the current month is '07.'
But, for debugging, I wanted to test to make sure it would properly adjust for January - '01' - by replacing MAX(Eff_Period) with '201501.'
It did. Worked fine. Then, to make really sure, I put in '201502.'
Instead of the single record of '01,' it shot out 177,209 rows of all '02's!
I put back in the MAX(Eff_Period) instead of the date string constant and, worked fine. Swapped back in the date string - boom! - 177,209 rows again.
Like I said, I can use DATEADD - Now I'm really confused. I changed the date string to '201501' just to verify before posting this, and it spit out 177,209 rows of '01's! So, to keep from altering things and to maintain the edit history, I started up another query and C&P'd everything to it. Then, on the original, I backed up to an earlier version, one that worked. That listing is the same as above, but the commented out comma in line 9 and the commented CAST in the line after it - to get the year - were uncommented.
Now, it works with both '201501' and '201502.' But, if I replace the comments, basically removing the CAST with the year, it slams back with 177,209 rows!
View 6 Replies
View Related
Feb 9, 2013
I’m using DAX to calculate the prior MTD count of a specific column. My data ends on 2/8/2013 and that day's PriorMTD is incorrectly corresponding to 1/31/2013. Whereas, the previous 7 days in February correctly match their corresponding January dates..Below is an image of my pivot table and I have outlined the values in red that are in question.Below are my DAX formulas used each column visible in my image:
Distinct Count of Events:=DISTINCTCOUNT([EventID])CurrentMTD:=CALCULATE([Distinct Count of Events], DATESMTD(Events[EventDate]), ALL (dimDate) )PriorMTD:=CALCULATE([Distinct Count of Events], DATEADD(DATESMTD(Events[EventDate]), -1, MONTH), all(dimDate)) ParallelMonth:= CALCULATE ([Distinct Count of Events], ParallelPeriod(Events[EventDate], -1, MONTH), ALL(dimDate))
View 5 Replies
View Related
Apr 22, 2015
following table global_usage
ID varchar (contains alphanumeric values,not unique)
Territory (combined with ID unique)
Total_Used int can be null
Date_ date (date of the import of the data)
ID Territory Total_Used Date_
ACASC CAL071287 2014-06-01
ACASC CAL071287 2014-08-01
ACASC CAL071288 2014-09-01
[Code] .....
Now the problem,per month I need the most recent value so I'm expecting
ACASC CAL071287 2014-06-01
ACASC CAL071287 2014-08-01
ACASC CAL071288 2014-09-01
ACASC CAL071288 2014-11-01
ACASC CAL071190 2014-12-14
ACASC CAL071286 2015-01-22
ACASC CAL071165 2015-02-01
ACASC CAL071164 2015-03-01
I've tried a few thing like group,having even row_number() but I keep getting wrong results
View 6 Replies
View Related
Sep 10, 2014
This is my table and data
CVID | WorkExperience
--------------------------------
2838736
68181101
96568122
1135484
I need to convert into this result
CVID | WorkExperience
--------------------------------
283873 years
681818 years 5 months
9656812 years 2 months
1135484 months
View 5 Replies
View Related
May 13, 2015
I have data similar to the below
CREATE TABLE #TEMP
(
TYPE VARCHAR(10),
SEQ INT,
SUB_TYPE VARCHAR(10))
[Code] ....
Now for each type the seq is very important. Effectively by order of seq the subtype stays the same until another subtype changes it. So for TYPE1 100,110 and 150 are A. 170, 200,220 are B. 230 and 250 are C and so on.
However as you can see the data isnt actually stored in the row. I need a select statement that shows this data.
I have done this:
SELECT t1.*,t3.SUB_TYPE FROM #TEMP t1
CROSS APPLY
(SELECT MAX(SEQ) SEQ FROM #TEMP AS t2 WHERE t1.SEQ >= t2.seq AND t2.SUB_TYPE <>'' AND t1.TYPE = t2.TYPE
GROUP BY t2.TYPE) t2
INNER JOIN
#TEMP t3
ON t3.TYPE = t1.TYPE AND t2.SEQ = t3.SEQ
And it seems to work. Is this the easiest way to do it or am i missing something?
View 3 Replies
View Related
Nov 3, 1999
I do appreciat your help, I want to run a store procedure which will show 6 months . I do not know how to write the procedure, here in the notion in my mind, I want to be able to pass an input parameter (month) to the procedure which will then run a query to show 6 months prior the input parameter month, how can I do that, thanks for your help
Ali
View 2 Replies
View Related
Oct 16, 2006
I'm very new to SQL Server so please forgive me if this question is ridiculously simple. I have to upgrade the report engine from one that was used in a legacy VB6 app to a C#.net app. In doing so, I'm looking at assorted reports that came out of the old app. Here is the SQL code for one of them:
SELECT (LTRIM(STR(From_To,10,0)) + '-' + LTRIM(STR(From_To + 49,10,0))) AS Bonus_Earned, COUNT (Empl_ID) AS Men, round(SUM (SumDollars),2) AS Group_Earn, round((SUM (SumDollars) / COUNT (Empl_ID)),2) AS Calc0 FROM (SELECT CONVERT (int, round (SumDollars / 50, 2)) * 50 AS From_To, SumDollars, Empl_ID FROM (SELECT round(SUM (Actual_Hours_Dollars.Incentivedollars * Contract_History.Bonus_Pct / 100), 2) AS SumDollars, employees.Empl_ID FROM ((Employees INNER JOIN Actual_hours_dollars ON Employees.Empl_ID = Actual_Hours_Dollars.Empl_ID_R) INNER JOIN Contracts ON Actual_Hours_Dollars.Contract_ID = Contracts.Contract_No) INNER JOIN Contract_History ON Contracts.Contract_Idx = Contract_History.Contract_Idx_R where employees.empl_idx = (SELECT max(empl_idx) FROM Employees AS OuterEmployees WHERE OuterEmployees.empl_id = employees.empl_id AND outeremployees.Datex = (SELECT max(datex) FROM Employees AS InnerEmployees WHERE InnerEmployees.empl_id = employees.empl_id AND Inneremployees.disabled = 0 AND Inneremployees.Datex < '~EndDate~')) AND Contracts.Datex = (SELECT max(datex) FROM Contracts AS InnerContracts WHERE InnerContracts.contract_no = Contracts.contract_no AND InnerContracts.disabled = 0 and InnerContracts.deleted = 0 AND InnerContracts.Datex < '~EndDate~') AND Actual_hours_dollars.Datex >= '~StartDate~' AND Actual_Hours_Dollars.Datex < '~EndDate~' AND dateadd(month, Contract_History.Monthx - 1, dateadd(year, Contract_History.Yearx - 1900, '01 Jan 1900')) >= '~StartDate~' AND dateadd(month, Contract_History.Monthx - 1, dateadd(year, Contract_History.Yearx - 1900, '01 Jan 1900')) < '~EndDate~' and Actual_Hours_Dollars.IncentiveHours <> 0 GROUP BY employees.empl_ID) AS InnerRS1 GROUP BY ROUND (SumDollars * 2, -2) /2, SumDollars, Empl_ID) AS InnerRS2 GROUP BY From_To
I'm only including it for completeness. The key thing I'd like to draw your attention to are two variables that are clearly input parameters: ~StartDate~ and ~EndDate~.
My question is this: If I want to copy this code into SQL Query Analyzer and run it to see what kind of results I get back, what's the simplest way to define these two input parameters? I'm hoping you could just show me the syntax to define them above the SELECT statement.
Robert Werner
Vancouver, BC
View 4 Replies
View Related
Apr 30, 2014
I am creating web application for state and dist wise map. I've the tables like
create table ind_state
(
ind_stat_id int,
ind_state_name varchar(50)
)
insert into ind_state values ('1','Pondi')
[Code] .....
My output is depends on the dist selection so made procedure
alter procedure LAT_TEST_DYNAM0
@dist_id int
as
begin
create table #temp (pincode varchar(10) ,latitude numeric(18,10),longitude numeric(18,10) ,descp varchar(5000))
if @dist_id!=0
[Code] ....
Myself doubt is when @dist_id is null or "0" how to show default value ?
Otherwise above my code is correct?
View 4 Replies
View Related
Feb 20, 2005
HI
I want to retrieve data in between two date formats using a query in SQL?
can i do it w/o using GUI tools?
For Exp i have sales data from date 11/11/2000 to 11/2004.
now as a user i want to give Input paramete value ranging between 06/06/2002 and 07/07/2002?
Is there any SQL query which i can use to retrieve the above date values?
Thanx in Advance
VS
View 9 Replies
View Related
Jul 2, 2007
Hi,
is it possible to change the appearence of input fields for parameters on the report server? My parameter is Multi-value with quite large amount of available values. On report server, user can (without scrolling) see only the first value. Parameter values are quite long, so user has to move alternally with both vertical and horizontal scrollbars to find the right value.
Thanks
Janca
View 1 Replies
View Related
Jun 8, 2015
I have the following Query.
SELECT CAST(DEL_INTERCOMPANYRETURNACTIONID AS NVARCHAR(4000)) COLLATE DATABASE_DEFAULT AS DEL_INTERCOMPANYRETURNACTIONID, 'SRC_AX.PURCHLINE.DEL_INTERCOMPANYRETURNACTIONID' FROM SRC_AX.PURCHLINE WHERE DEL_INTERCOMPANYRETURNACTIONID IS NULL UNION
SELECT CAST(DEL_INTERCOMPANYRETURNACTIONID AS NVARCHAR(4000)) COLLATE DATABASE_DEFAULT AS DEL_INTERCOMPANYRETURNACTIONID, 'SRC_AX.SALESLINE.DEL_INTERCOMPANYRETURNACTIONID'
[Code] .....
My tabel is HST_MASTER.Control.
I want to have this query in a stored procedure. What syntax stored procedure i need to make to fill my table.
View 1 Replies
View Related
May 19, 2014
I've the table like
create table expense
(
bill_date datetime,
travel int,
fixed int,
food int,
lodge int
)
insert into expense values('01-04-2014',1200,250,0,0)
('02-04-2014','0',0,500,600)
('0-04-2014','800',300,0,0)
Like I've 30th onwards.....
Expecting o/p:
month Travel Fixed Food Lodge
apr-14 200 550 500 600
These cum column values how to make a code ?????
View 5 Replies
View Related
Jun 26, 2014
I would like to get the first and last day of any month in a given date range.
Ex: Display the first and last day of the months between @startDate and @EndDates.
Input Params= @StartDate='2016-06-21 16:57:11.093'
@EndDate = '2016-09-30 00:00:00.000'
OutPut should be:-
MonthStartDateMonthEndDate
1/06/201630/06/2016
1/07/201631/07/2016
1/08/201631/08/2016
1/09/201630/09/2016
View 1 Replies
View Related
May 13, 2015
I have
Issues | Category | Date
I1 | A | 1/1/2015
I2 | A | 2/2/2015
I3 | B | 2/1/2015
I4 | C | 3/3/2015
I5 | B | 4/3/2015
I6 | A | 5/4/2015
I want to convert to
A | B | C
JAN 1 | 1 | 0
FEB 1 | 0 | 0
MAR 0 | 1 | 1
APR 1 | 0 | 0
Where numbers under neath A, B, C are the count that falls in the particular month.
View 3 Replies
View Related
Dec 27, 2000
I'm trying something like this:
CREATE PROCEDURE Add_Junk @Dist char, @CheckNo int =null OUTPUT AS
Set NoCount On
BEGIN TRANSACTION
INSERT INTO Junk (Dist)
VALUES (@Dist)
COMMIT TRANSACTION
select @CheckNo=@@IDENTITY
If what I pass is "416" I only get the "4" in my database and nothing else.
I don't get an error message.
What is wrong with my syntax?
PS I'm using Microsoft SQL 7.0
View 2 Replies
View Related
Nov 14, 2006
Hello, a question please. Could anyone say me if I can create a store procedure with 2 'select's statements into. Besides, I'd want to know if I can execute a "select" depending on input parameters.
Something like this:
create storeproc
Param1, param2
if param1 <> null
Select *
from table
where id = param1
else
Select *
from table
where id = param2
end if
Thanks in advance....
View 2 Replies
View Related
Nov 7, 2006
There is not a way to pass parameters to input of Web Service tasks. I heard this problem is fixed with SQL2K5 SP1 and even the online doc says that one can choose either "value" or "variable" when specifying input for web service tasks, but after I installed what-I-think-is SP1, there is still no way to do this.
If one can only specify values (hard-coded) as input to web service tasks, then this would be a very severe limitation. I hope I'm wrong, so could someone please give a pointer. Thanks
Kevin Le
View 7 Replies
View Related
Sep 24, 2014
I have a Table with Financial Data in it and for Certain Accounts (the Key Field is actindx Column)there is no data for Certain Months.
I need a query to fill in the data for each Calendar_Month. This should look at the actindx column and Calendar_Month column if there is no data for a specific Month for that actindx I want it to copy all columns for that actindx and insert into a new row, but just puts Zero Dollars for ActivityDebit, ActivityCredit, and NetAmount.
I have created a CalendarMonth_Lookup Table. I assume there is a way to outer Join the two and insert rows or use an "IF" ,"THEN" type of Statement and just manually add the Calendar Month data.
I am including all the code to make the tables and Insert Data into them.
CODE TO CREATE GPBalances Table
CREATE TABLE [dbo].[GPBalances](
[GP_Balance_ID] [int] IDENTITY(1,1) NOT NULL,
[FISCALYEAR] [smallint] NULL,
[ACCTPERIOD] [varchar](255) NULL,
[YEAR_MONTH_TEXT] [varchar](255) NULL,
[Code] ......
View 3 Replies
View Related
Dec 16, 2014
i have a monthly production script that requires two forms of the prior month's date.'yyyymm' or '201411' and 'yyyy-mm-dd' or '2014-11-01'. The second date must have a day value of '1'. I have to use these date values in my script a half dozen times. Ive tried to declare two variables to accomodate but i can not get them correct.
I can execute the following:
SELECT LEFT(CONVERT(varchar, DATEADD(MONTH,-1,GetDate()),112),6)
---------------------------
201411
When I try this as a declared variable:
DECLARE @RPT_DTA VARCHAR
SET @RPT_DTA = CONVERT(varchar, DATEADD(MONTH,-1,GetDate()),112)
SELECT @RPT_DTA
--------------------------
2
DECLARE @RPT_DTB VARCHAR
SET @RPT_DTB = DATEPART(YEAR,DATEADD(MONTH,-1,GetDate())) + DATEPART(month,DATEADD(MONTH,-1,GetDate()))
SELECT @RPT_DTB
-----------------------------
*
View 3 Replies
View Related
Dec 17, 2014
Background is that I am recreating charts in SSRS that were being created in Excel. The source data is residing in a SQL Server database. I'm having a hard time coming up with a SQL query to provide a 6 month forecast. I can get my data into a pivot (within a stored procedure) in the following format:
Period---------Date--------------------------------Percent
1--------------2013-11-01 00:00:00.000---------0.3762
2--------------2013-12-01 00:00:00.000---------0.3584
3--------------2014-01-01 00:00:00.000---------0.3604
4--------------2014-02-01 00:00:00.000---------0.3292
5--------------2014-03-01 00:00:00.000---------0.3519
[Code] ....
I need to forecast the next 6 dates 12/1/2014 thru 5/1/2015 using the last 6 months in the data set (periods 8 thru 13)
Period---------Date--------------------------------Percent-------Forecast
1--------------2013-11-01 00:00:00.000---------0.3762
2--------------2013-12-01 00:00:00.000---------0.3584
3--------------2014-01-01 00:00:00.000---------0.3604
4--------------2014-02-01 00:00:00.000---------0.3292
5--------------2014-03-01 00:00:00.000---------0.3519
6--------------2014-04-01 00:00:00.000---------0.4064
[code].....
how to use the first table to generate the forecast values in the second table.
View 4 Replies
View Related
Feb 22, 2015
I m creating P&L(profit and Loss ) Reports of accounts its consists of 2 levels
in level2:
my procedure display the output of (Actuals in lakhs)
RESPONSIBILITY DEPT CATEGORY CURRENT YTD ACTUALS
SALES Sales Net Sales 444.65
Sales Sales LESS TRD 22.55
SALES NET RETURNS NET RETURNS 422.10 (net sales - TRD)
Finance LESS ED LESS ED 40
Sales Totals Sales 382.10(RETURNS - ED)
(only calculation for above dept only remaining dept values display sum of relvenat accounts ,and if i click the category relvent account codes shown here)
Materials .... ... ..
production ..... ............ ........
i made a procedure for above
create procedure Pl_level2
@fmdate datetime,
@todate datetime,
@category varchar(200)
as
begin
create table #temp1
[code]....
like i m inserted so many accounts in temp tables .
IF (@category IS NULL or @catagory=' ' )
begin
select
responsibility,
dept,
category,
round(Max(Actuals)/100000,1,2) as Actuals from #temp
[code]....
here i can display only current YTD only how to display previous year (13-14) YTD in level1
How to do?
View 1 Replies
View Related
Dec 17, 2013
I've been tasked with creating a stored procedure which will be executed after a user has input one or more parameters into some search fields. So they could enter their 'order_reference' on its own or combine it with 'addressline1' and so on.
What would be the most proficient way of achieving this?
I had initially looked at using IF, TRY ie:
IF @SearchField= 'order_reference'
BEGIN TRY
select data
from mytables
END TRY
However I'm not sure this is the most efficient way to handle this.
View 2 Replies
View Related
Feb 18, 2006
The foolowing code I cannot seem to get working right. There is an open connection c0 and a SqlCommand k0 persisting in class.The data in r0 is correct and gets the input arguments at r0=k0->ExecuteReader(), but nothing I do seems to get the output values. What am I missing about this?
System::Boolean rs::sp(System::String ^ ssp){
System::String ^ k0s0; bool bOK;
System::Data::SqlClient::SqlParameter ^ parami0;
System::Data::SqlClient::SqlParameter ^ parami1;
System::Data::SqlClient::SqlParameter ^ parami2;
System::Data::SqlClient::SqlParameter ^ paramz0;
System::Data::SqlClient::SqlParameter ^ paramz1;
System::Int32 pz0=0;System::Int32 pz1=0;
k0s = ssp;
k0->CommandType=System::Data::CommandType::StoredProcedure;
k0->CommandText=k0s;
paramz0=k0->Parameters->Add("@RETURN_VALUE", System::Data::SqlDbType::Int);
//paramz0=k0->Parameters->AddWithValue("@RETURN_VALUE",pz0);
//paramz0=k0->Parameters->AddWithValue("@RETURN_VALUE",pz0);
paramz0->Direction=System::Data::ParameterDirection::ReturnValue;
paramz0->DbType=System::Data::DbType::Int32;
parami0=k0->Parameters->AddWithValue("@DESCXV","chicken");
parami0->Direction=System::Data::ParameterDirection::Input;
parami1=k0->Parameters->AddWithValue("@SRCXV","UU");
parami1->Direction=System::Data::ParameterDirection::Input;
//paramz1=k0->Parameters->AddWithValue("@RCOUNT",pz1);
paramz1=k0->Parameters->Add("@RCOUNT",System::Data::SqlDbType::Int);
paramz1->Direction=System::Data::ParameterDirection::InputOutput;
paramz0->DbType=System::Data::DbType::Int32;
//k0->Parameters->GetParameter("@RCOUNT");
r0=k0->ExecuteReader();
//pz0=System::Convert::ToInt32(paramz0->SqlValue);
bOK=k0->Parameters->Contains("@RCOUNT");
//k0->Parameters->GetParameter("@RCOUNT");
pz0=System::Convert::ToInt32(paramz0->Value);
pz1=System::Convert::ToInt32(paramz1->Value);
ndx = -1;
while(r0->Read()){
if (ndx == -1){
ndx=0;
pai0ndx=0;
pad0ndx=0;
r0nf=r0->FieldCount::get();
for (iG1_20=0;iG1_20<r0nf;iG1_20++){
this->psf0[iG1_20]=this->r0->GetName(iG1_20);
this->psv0[iG1_20]=this->r0->GetDataTypeName(iG1_20);
this->psz0[iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
this->pas0[ndx,iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
if (psv0[iG1_20]=="int") {pai0[ndx,pai0ndx]=System::Convert::ToInt32(r0->GetValue(iG1_20));pai0ndx++;}
if (psv0[iG1_20]=="float") {pad0[ndx,pad0ndx]=System::Convert::ToDouble(r0->GetValue(iG1_20));pad0ndx++;}
}
}
else {
pai0ndx=0;
pad0ndx=0;
for (iG1_20=0;iG1_20<r0nf;iG1_20++)
{ this->pas0[ndx,iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
if (psv0[iG1_20]=="int") {pai0[ndx,pai0ndx]=System::Convert::ToInt32(r0->GetValue(iG1_20));pai0ndx++;}
if (psv0[iG1_20]=="float") {pad0[ndx,pad0ndx]=System::Convert::ToDouble(r0->GetValue(iG1_20));pad0ndx++;}
}
}
ndx++;
}
r0nr=ndx;
r0->Close();
k0->Parameters->Remove(paramz0);
k0->Parameters->Remove(parami1);
k0->Parameters->Remove(parami0);
k0->Parameters->Remove(paramz1);
return true;
}
View 5 Replies
View Related
Oct 15, 2014
This statement adds two additional months to which is fine :
DATENAME(MM,dd.date)+ ' ' + DATENAME(D,dd.date) + ', ' + DATENAME(YY,dd.date)
but if my month is November and two months is added, the year does not change, it stays the same. how do I make the year change when two months are added toward the end of the year.
View 7 Replies
View Related
Dec 4, 2003
Hi everyone
I have just starting creating some stored procedures for our system and have a question related to management of these.
When using input parameters using the following syntax:
CREATE PROCEDURE sp_someInputProcedure
@Username as varchar(16)
@Password as varchar(12)
@Name as varchar(50)
@Address as varchar(60)
@Zip as int
@City as varchar(30)
...
etc.
This is all well and good, but what if I make a change in the datamodel - for instance changing a datatype or the length of a varchar - do I need to remember to manually update all stored procedures that uses these columns/variables?
Seems like a bit of a hazzle. Is there an easier way to do this?
Many thanks,
Stian Danielsen
Epizone
View 4 Replies
View Related
Dec 4, 2005
How can I run a single SP by asking multiple sales question eitherby using the logical operator AND for all the questions; or usingthe logical operator OR for all the questions. So it's alwayseither AND or OR but never mixed together.We can use Northwind database for my question, it is very similarto the structure of the problem on the database I am working on.IF(SELECT OBJECT_ID('REPORT')) IS NOT NULLDROP TABLE REPORT_SELECTIONGOCREATE TABLE REPORT_SELECTION(AUTOID INT IDENTITY(1, 1) NOT NULL,REPSELNO INT NOT NULL, -- Idenitifies which report query this-- "sales question" is part ofSupplierID INT NOT NULL, -- from the Suppliers tableProductID INT NOT NULL, -- from the Products table, if you choose--a ProductID, SupplierID is selected also by inheritenceCategoryID INT NOT NULL, -- from the Categories tableSOLDDFROM DATETIME NULL, -- Sold from which dateSOLDTO DATETIME NULL, -- Sold to which dateMINSALES INT NOT NULL, -- The minimum amount of salesMAXSALES INT NOT NULL, -- The maximum amount of salesOPERATOR TINYINT NOT NULL -- 1 is logical operator AND, 2 is OR)GOINSERT INTO REPORT_SELECTIONSELECT 1, 1, 2, 1, '1/1/1996', '1/1/2000', 10, 10000, 1 UNION ALLSELECT 1, -1, -1, 1, '1/1/1996', '1/1/2000', 10, 1000, 1You can ask all kinds of sales questions like:1-I want all employees that sold products from supplierID 1(Exotic Liquids), specifically the ProductID 2 (Chang) from theCategoryID 1 (Beverages) between Jan 1 1996 to Jan 1 2000 and soldbetween $10 and $10000 - AND for my 2nd sales question2-I want all employees that sold CategoryID 1 (beverages) betweenJan 1 1996 to Jan 1 2000 and sold between $10 and $1000I want to get the common result of both questions and find outwhich employee(s) are in this list.Here are some of the points:1-I want my query to return the list of employees fitting theresult of my sales question(s).2-If I ask three questions with the logical operator AND, I wantthe list of employees that are common to all three questions.3-If I ask 2-3-4. questions with the logical operator OR, I wantthe list of employees that are in the list of the 1st "successful"sales question (the first question that returns any employee isgood enough)4-You can ask all kind of sales question you want even if theycontradict each other. The SP should still run and returnnothing if that is the case.5-Let's assume you can have the same product name from the samesupplier but under different categories. So entering a ProductIDshould not automatically enter the CategoryID also; whereasentering the ProductID should automatically enter its SupplierID.6-SOLDFROM, SOLDTO, MINSALES, MAXSALES, OPERATOR are mandatoryfields, you can't leave them NULL7-SupplierID, ProductID and CategoryID are the dynamic inputparameters, there can be 5 different combinations to choose from:a-SupplierID onlyb-SupplierID and a ProductID,c-SupplierID and a CategoryIDd-SupplierID, ProductID and a CategoryIDe-CategoryID onlyf-Any time you choose a ProductID, the SupplierID valuewill be filled automatically based on the ProductID'srelationshipg-Any of the three values here that is not chosen by theuser will take a default value of -1 (meaning return ALLfor this Column, in other words don't filter by this column)The major problem I have is I can't use dynamic SQL for choosingthe three dynamic columns as the 2nd row of records would have adifferent selection of dynamic columns (at least I don't know howif the solution is dynamic SQL). The only solution I can think oflooks pretty bad to me. I would use a cursor, run each row at atime, store a TRUE, FALSE value to stop processing or not andstore the result in another detail table. Then if all ANDquestions have ended with TRUE do a union of all the result andreturn the common list of employees. It sounds pretty awful as anapproach. I am hoping there's a simpler method for achieving this.Does anyone know if any SQL book has a topic on this type ofquery? If so I'll definitely buy the book.I appreciate any help you can provide.Thank you
View 7 Replies
View Related
May 14, 2008
Hi,
I have 2 source tables emp_ass,aprvl_status these tables are not having common column to join. and 1 target table Time_Card, i have a stored procedure with 4 input parameters, emp_ass_id,status_id,start date,end date,i am inserting data into timecard based on emp_ass_id, my week start date is sunday and end date is saterday if emp start date is sunday i am just incremnting the start date by 7 days as end date is saterday and inserting that row, if employe statrt date is other than Sunday. i am just insering start date with to reach end date saterday, this work fine when i give the input parameters, now my reqirement is i need to automate this process as i need to get new emp_ass_id which is not in target table and insert his records based on his start date and end date,
ex:
if emp_ass_id is 1001, start date 1/1/2008 and end date is 2/1/2008 then i need to insert
Uniq_Id, emp_ass_id, start_date end_date status_id
1099
1001
1/1/2008 12:00:00 AM
1/5/2008 12:00:00 AM 1
1100
1001
1/6/2008 12:00:00 AM
1/12/2008 12:00:00 AM 1
1101
1001
1/13/2008 12:00:00 AM
1/19/2008 12:00:00 AM 1
1102
1001
1/20/2008 12:00:00 AM
1/26/2008 12:00:00 AM 1
1103
1001
1/27/2008 12:00:00 AM
2/2/2008 12:00:00 AM 1
the stored procedure will insert these records if i give the input parameters, now i need to automate this process by using SSIS. please help me,i need to get emp_ass_id,start_date,end_date dynamically from source table if emp_ass_id is not in target table.
Thanks in advance.
View 9 Replies
View Related
Dec 10, 2007
Hi,
id beg for a hint if our idea of a general dynamic CATCH handler for SPs is possible somehow. We search for a way to dynamically figure out which input parameters where set to which value to be used in a catch block within a SP, so that in an error case we could buld a logging statement that nicely creates a sql statement that executes the SP in the same way it was called in the error case. Problem is that we currently cant do that dynamically.
What we currently do is that after a SP is finished, a piece of C# code scans the SP and adds a general TRY/CATCH bloack around it. This script scans the currently defined input parameters of the SP and generates the logging statement accordingly. This works fine, but the problem is that if the SP is altered the general TRY/CATCH block has to be rebuildt as well, which could lead to inconstencies if not done carefully all the time. As well, if anyone modifies an input param somewhere in the SP we wouldnt get the original value, so to get it right we would have to scan the code and if a input param gets altered within the SP we would have to save it at the very beginning.
So the nicer solution would be if we could sniff the input param values dynamically on run time somehow, but i havent found a hint to do the trick.....
Any tipps would be appreciated...
cheers,
Stefan
View 1 Replies
View Related
Mar 25, 2014
I'm trying to write some T-SQL to return the previous even numbered month and appropriate year from given date.
Examples given:
03-25-2014 should return 02-xx-2014
01-01-2014 should return 12-xx-2013
View 2 Replies
View Related
May 28, 2014
i would like to see the 2014-06 matched results (3rd query), if the same ssn and acctno is exist in 2012-06 and 2013-06 and 2014-06 then eliminate from results, otherwise show it
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2012-06'
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2013-06'
select ssn, acctno From jnj.drgSamples where Channel ='KM' and TrailMonth ='2014-06'
i have written the below query but it shows only matched across three queries, but i want to display / delete from 2014-06 records if the ssn and acctno is exist in 2012-06 and 2013-06
select c.* from (
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2012-06' ) a join
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2013-06' ) b on a.SSN = b.SSN and a.acctno = b.acctno join
(select * From jnj.drgSamples where Channel ='KM' and TrailMonth ='2014-06' ) C on a.SSN = c.SSN and a.acctno = c.acctno join
)
View 4 Replies
View Related
Mar 30, 2015
how to return the 3 month rolling average count per username? This means, that if jan = 4, feb = 5, mar = 5, then 3 month rolling average will be 7 in April. And if apr = 6, the May rolling average will be 8.
Columns are four:
username, current_tenure, move_in_date, and count.
DDL (create script generated by SSMS from sample table I created, which is why the move_in_date is in hex form. When run it's converted to date. Total size of table 22 rows, 4 columns.)
CREATE TABLE [dbo].[countHistory](
[username] [varchar](50) NULL,
[current_tenure] [int] NULL,
[move_in_date] [smalldatetime] NULL,
[Cnt_Lead_id] [int] NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
[code]....
View 9 Replies
View Related
May 11, 2015
I have table in which month & year are stored, Like this
Month Year
10 2014
11 2014
12 2014
1 2015
2 2015
3 2015
4 2015
I wanted a query in which it should return the value in a status field which has latest year & month.
View 9 Replies
View Related
