T-SQL (SS2K8) :: Get Start And End Date Based On A Criteria?
Apr 17, 2014
I have a scenario where i need to get the starting and ending date time based on the crieteria. The criteria is I always have my start date as NS or GS in the data column and my end date as GX so i need NS or GS to be my strart date based on ts Ascending and my end date as GX to be displayed in the same columns .
Create Table Test
(Tsq INT IDENTITY (1,1),
Data Varchar (150),
ts datetime,
Tpkt_type int)
insert into test values ('GS,000020,000021,000022,000023','2013-11-13 09:47:35.963','2')
[code]....
Expected Output
---------Data----------------- ts as starttime--------------tpkt_type------data-----------------------ts as endtime--------tpkttype-
'GS,000020,000021,000022,000023','2013-11-13 09:47:35.963','2' 'GX,1,0000000000000000000000000','2013-11-13 09:47:37.007','4'
'GS,000020,000021,000022,000023','2013-11-13 09:50:25.987','2', 'GX,1,0000000000000000000000000','2013-11-13 09:50:40.920','4'
'GS,000020,000021,000022,000023','2013-11-13 09:51:28.330','2', 'GX,1,0000000000000000000000000','2013-11-13 09:51:43.257','4'
'NS,000020,000021,000022,000023','2013-12-17 16:51:09.063','18', 'GX,1,0000000000000000000000000','2013-12-17 16:51:15.257','4'
View 9 Replies
ADVERTISEMENT
Aug 27, 2014
I would like to have records in my Absences table split up into multiple records in my query based on a start and end date.
A random record in my Absences table shows (as an example):
resource: 1
startdate: 2014-08-20 09:00:00.000
enddate: 2014-08-23 13:00:00.000
hours: 28 (= 8 + 8 + 8 + 4)
I would like to have 4 lines in my query:
resource date hours
1 2014-08-20 8
1 2014-08-21 8
1 2014-08-22 8
1 2014-08-23 4
Generating the 4 lines is not the issue; I call 3 functions to do that together with cross apply.One function to get all dates between the start and end date (dbo.AllDays returning a table with only a datevalue column); one function to have these dates evaluated against a work schedule (dbo.HRCapacityHours) and one function to get the absence records (dbo.HRAbsenceHours) What I can't get fixed is having the correct hours per line.
What I now get is:
resource date hours
...
1 2014-08-19 NULL
1 2014-08-20 28
1 2014-08-21 28
1 2014-08-22 28
1 2014-08-23 28
1 2014-08-24 NULL
...
... instead of the correct hours per date (8, 8, 8, 4).
A very simplified extract of my code is:
DECLARE @startdate DATETIME
DECLARE @enddate DATETIME
SET @startdate = '2014-01-01'
SET @enddate = '2014-08-31'
SELECTh.res_id AS Resource,
t.datevalue,
(SELECT ROUND([dbo].[HRCapacityHours] (h.res_id, t.datevalue, t.datevalue), 2)) AS Capacity,
(SELECT [dbo].[HRAbsenceHours] (9538, h.res_id, t.datevalue, t.datevalue + 1) AS AbsenceHours
FROMResources h (NOLOCK)
CROSS APPLY (SELECT * FROM [dbo].[AllDays] (@startdate, @enddate)) t
p.s.The 9538 value in the HRAbsenceHours function refers to the absences-workflowID.I can't get this solved.
View 1 Replies
View Related
Mar 11, 2014
I have an SSRS Report that I created. I'd like to set up a job that will run every hour, and what the job will do is send an SSRS report to a select group of recipients when a certain criteria is met. How do I go about doing this? My SSRS knowledge is very limited.
Additional Info:I created the report with a one time schedule to a certain email address. I do see the report schedule in the reportserver DB. Because I already have the schedule and the subscription id, I think all I have to do is call that subscription, but that's where I'm lost.
View 3 Replies
View Related
Mar 16, 2007
Hi
I am very new to SQL so please excuse me if my question seems too easy to answer.
Basically I need to populate a form based with records based on the criteria that the next mot date and todays are +/- 10 days.
i.e if todays date is 13/05/07 and the next mot date is 3/05/07 or later OR 23/05/07 or less then various fields will be shown in the form.
Can you please help.
Thanks
Paul
View 2 Replies
View Related
Sep 7, 2005
Code:
SELECT (JUL_CURR_CREDITS + JUL_CURR_DEBITS +
AUG_CURR_CREDITS + AUG_CURR_DEBITS +
SEP_CURR_CREDITS + SEP_CURR_DEBITS +
OCT_CURR_CREDITS + OCT_CURR_DEBITS +
NOV_CURR_CREDITS + NOV_CURR_DEBITS +
DEC_CURR_CREDITS + DEC_CURR_DEBITS +
JAN_CURR_CREDITS + JAN_CURR_DEBITS +
FEB_CURR_CREDITS + FEB_CURR_DEBITS +
MAR_CURR_CREDITS + MAR_CURR_DEBITS +
APR_CURR_CREDITS + APR_CURR_DEBITS +
MAY_CURR_CREDITS + MAY_CURR_DEBITS +
JUN_CURR_CREDITS + JUN_CURR_DEBITS) as CURR_AMT
I need to sum these amounts running from July to the month prior to whatever the current month is. So if it was August, it would only be
Code:
SELECT (JUL_CURR_CREDITS + JUL_CURR_DEBITS) as CURR_AMT
Is there a cleaner (shorter) way to iterate through the twelve months than either writing the query 12 times in an IF statement, or 12 CASE statements? This is only part of a query that joins several tables (not shown).
Any suggestions on the best way to write this would be valued.
View 2 Replies
View Related
Mar 14, 2014
Let's say the first row returned has StartDate = 1/1/2014 and EndDate is 1/2/2014. The next row I want the StartDate to equal the previous row EndDate so it would be 1/2/2014 as StartDate. This compounds every row basically the third row StartDate would be the second row EndDate. All in one select statement if it can be done. Using SQL2008r2.
View 9 Replies
View Related
Jul 23, 2005
I have a transaction log that tracks issues from a call center. Eachtime an issue is assigned to someone else, closed, etc. I get a timestamp. I have these time stamps for the beginning of an issue to theend of an issue and I'd like to determine how many business hours theseissues were open.Issue BeginDt Enddt Total hours1 3/29/05 5:00 PM 4/1/05 2:00 PM 69Basically, this is the type of data I'm looking at and my hours of workare from 7:30 - 5:00 weekdays. I need to come up with a way to removeall nonbusiness hours, weekends, & holidays from the difference of thetwo dates. Issues can span for 2-3 days or 20-30 days.Please let me know if anyone has any ideas or has done something likethis before.Thanks!
View 5 Replies
View Related
Oct 15, 2014
Any UDF that accepts a Month and Year and returns Start Date and End Date.
For example @Month = 01 and @Year = 2014 would return a StartDate of 2014-01-01 and an EndDate of 2014-01-31.
View 8 Replies
View Related
Mar 16, 2015
I've SSRS sales report to which I need to pass the dates for previous month's start date and end date which I am able to pass using below code. However, since the sales report has data from the past year(2014) I need to pass the dates for last year as well. The below code gives StartDate1 as 2015-02-01 and EndDate1 as 2015-02-28. I need to get the dates for past year like 2014-02-01 as StartDate2 and 2014-02-28 as EndDate2
SELECT DATEADD(MONTH, DATEDIFF(MONTH, '19000201', GETDATE()), '19000101') AS StartDate1,
DATEADD(MONTH, DATEDIFF(MONTH, '19000101', GETDATE()), '18991231') AS EndDate1
View 1 Replies
View Related
Jul 7, 2015
I have a detailed report in ssrs in which data can come from start date and end date parameters.
but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and sooo on to sep month data in new tab when i export to Excel.
Is this possible in ssrs ?
View 1 Replies
View Related
Jul 16, 2014
I have 2 tables:
Table Transaction
-----------------
EmpID TransDate
00001 1/1/2014
00001 1/2/2014
00001 1/3/2104
00001 1/4/2014
00001 1/5/2014
00001 1/6/2014
00001 1/15/2014
00001 2/1/2014
00001 2/2/2014
00001 2/20/2004 ....
Table Master
---------------------------
EmpID EffectiveDateFr Group
00001 1/1/2014 A
00001 1/5/2014 B
00001 1/9/2014 C
00001 2/1/2014 B
00001 2/20/2014 A ....
I want to create query the output should be:
EmpID TransDate Group
00001 1/1/2014 A
00001 1/2/2014 A
00001 1/3/2104 A
00001 1/4/2014 A
00001 1/5/2014 B
00001 1/6/2014 B
00001 1/15/2014 C
00001 2/1/2014 B
00001 2/2/2014 B
00001 2/20/2004 A
View 4 Replies
View Related
Jan 5, 2015
I have to produce a report to calculate no of days based on user input start date and end date. I have tried to explain below.
say for eg: in the tables I have emp name
user 'Phani' started work from - EStart 20/11/2014EEnd 10/01/2015 - total days --datediff
within his work period he did different roles:
PhaniMarketing (prSt Date) 20/11/2014prE date (28/11/2014) Total 9 days
PhaniAdmin (prSt Date) 29/11/2014prE date (20/12/2014) Total 22 days
PhaniCRM (prSt Date) 20/12/2014prE date (10/01/2015) Total 22 days
Total days 53 Days
For this :
I calculated datediff + 1 and got sub jobs days BUT
say financial director wants to see Title of 'Sub Jobs' with 'Days' from 1st Dec to 31st Dec
so on paper I calulated as :
1-31 Dec 2014
PhaniMarketing NULL (Do not fall in Req Dt)
PhaniAdmin 20 (Deduct 2 days of Nov & calculated 20 days of Dec)
PhaniCRM 11 (Deduct 20 days of Nov and deduct 11 days of Jan so for Dec , we got 11 days)
Total days 31
HOW CAN I USE Case statement to calculate days for given start date and end date. I have to include all three totals, 1 for Job dates, 2, subjobs dates, 3 cal of days for a requested period.
View 4 Replies
View Related
Jul 7, 2015
I have a detailed report in ssrs in which data can come from start date and end date parameters.but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and so on to sep month data in new tab when i export to Excel.
View 3 Replies
View Related
Jan 5, 2015
I have to produce a report to calculate no of days based on user input start date and end date.
say for eg: in the tables I have emp name
user 'Phani' started work from - EStart 20/11/2014EEnd 10/01/2015 - total days --datediff
within his work period he did different roles:
PhaniMarketing (prSt Date) 20/11/2014prE date (28/11/2014) Total 9 days
PhaniAdmin (prSt Date) 29/11/2014prE date (20/12/2014) Total 22 days
PhaniCRM (prSt Date) 20/12/2014prE date (10/01/2015) Total 22 days
Total days 53 Days
for this :
[code]...
HOW CAN I USE Case statement to calculate days for given start date and end date. I have to include all three totals, 1 for Job dates, 2, subjobs dates, 3 cal of days for a requested period.
View 0 Replies
View Related
May 19, 2015
DELETE FROM Report_temp2
WHERE MSSalesID in
( Select Report_temp.MSSalesID FROM Report_temp)
DELETE FROM Report_temp
WHEREMSDate < '2015-07-01'
Actually the year stating form july.
Q1 is july,aug,sep.
Q2 is oct nov,dec.
Q3 is jan,feb,mar.
Q4 is april, may,june.
So what I need is dynamically I want to delete the data every year prior to current year.
View 4 Replies
View Related
May 6, 2014
I would like to generate a working schedule for employees for x-days ahead based on a starting date that the user can enter.
I have got 3 relevant tables:
1. Table X with (1) resourcenumber, (2) starting date working schedule and (3) the daynumber representing the starting date (this is ISO so 1 for Monday, 2 for Tuesday etc.)
2. Table Y has the schedule itself and can hold a 7-days schedule or a 14-days schedule. In case of 7 days schedule there a 14 (!) records with (1) resourcenumber, (2) daynumber, (3) starting hour a.m. (4) ending hour a.m (5) starting hour p.m and (6) ending hour p.m. In case of a 14-days schedule there are 28 records (a.m. and p.m. records)
3. Table Z with resource data.
An example to clarify (for fake employee 100):
Table X:
Resource: 100
Starting date: 2012-03-01 (from this date the schedule will be effective)
Daynumber: 4 (2012-03-01 was a Thursday)
Table Y (Resource has a 14 days schedule because per 2 weeks Monday is an off-day):
Record 1 shows: Resource: 100, Daynumber: 1 (= Monday, working day), AM-Starting hour: 09:00, AM-Ending hour: 13:00, PM-starting hour: 13:30, PM-ending hour: 17:30
Record 2: same but daynumber is 2
Record 3: same but daynumber is 3 etc.
...
Record 8 shows: Resource: 100, Daynumber: 8 (= Monday, off-day), AM-Starting hour: 00:00, AM-Ending hour: 00:00, PM-starting hour: 00:00, PM-ending hour: 00:00
Record 9: same as record 2 but daynumber is 9.
etc.
...
Record 14: same as record 7 but day is 14 (= last day)
The weekend days show as 00:00 for the hours (same as day 8 in example)
I generated the working schedule with a CROSS APPLY function based on the starting date and the x-number of days ahead.
I then evaluate the actual daynumber corresponding with that date with the daynumber in table Y. That works fine with a 7-days schedule but I can't get it fixed with a 14-days schedule. Day 8 in that schedule represents an actual day 1 but how do I know what actual date day 8 is ... I think I have to start with the starting date in table X ...
I think ideally I would like to have the generated days as follows (as an example in case of a 14-days schedule starting 2014-05-01 for 30 days ahead):
2014-05-01 = day 4 (= actual daynumber)
2014-05-02 = day 5
2014-05-03 = day 6
...
2014-05-10 = day 13
2014-05-11 = day 14
2014-05-12 = day 1
2014-05-13 = day 2
2014-05-14 = day 3
...
2014-05-24 = day 13
2014-05-25 = day 14
2014-05-26 = day 1
2014-05-27 = day 2
...
2014-05-31 = day 6
With this done I can compare the actual daynumber with the daynumber in Table Y.
The rownumber that the CROSS APPLY function generates has to be reset to 1 after day 14. I tried PARTITION BY in THE ROW_NUMBER function but to no avail ... The only field I can partition by is the maximum value of the daynumber (14 is the example) but that is not allowed in the rownumber function.
View 0 Replies
View Related
May 31, 2008
Hi I hope i make sense this time around, I have a page in which a customer can either add a new product and its rate as well as update an existing product. What i am trying to achieve is get the live rate of the product, when a user goes to order the product. Each existing product can be updated twice in a year either in period 1 or period 2, therefore there is a possibility that a rate hasnt been updated which means the price should be the alst updated rate. Therefore the following are the possible rates which the product can have;
dbo.tblRateSchedule.Rate - This will be the rate when a product is new and has just been added, therefore no previous rates.
dbo.tblHistoricalRateSchedule.Rate2007Period2- Most existing products are still having this rate as their latest rate.
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate - This is the rate when a rate has been updated in 2008 period 1
dbo.tblRateSchedule.RateScheduleYear2008Period2Rate - This is the rate when a rate has been updated in 2008 period 2
What i am trying to do is get the latest rate as it stands in the system, based on the above scenarios. This what I have so far, i tried to use the ISNULL, however that didnt work for probably because there are four instances. The following is the "view" which returns the rates.
Code:
SELECT dbo.tblWorkSchedule.Survey_ID, dbo.tblWorkSchedule.WorkSchedule_ID, dbo.tblWorkSchedule.WorkScheduleType_ID,
dbo.tblWorkSchedule.ScheduleStatus_ID, dbo.tblWorkSchedule.Qty, dbo.tblRateScheduleUnit.Unit, dbo.tblWorkType.Work_Type_Description,
dbo.tblRateScheduleType.Type, dbo.tblWorkSchedule.MA_Code, dbo.tblRateSchedule.SOR_Code, dbo.tblSurvey.PropertyYear_ID,
dbo.tblSurvey.PropertyPeriod_ID, ISNULL(dbo.tblWorkSchedule.Valuation, 0) AS Valuation, dbo.tblSurvey.WorkScheduleOverallStatus_ID,
dbo.tblSurvey.VariationOverallStatus_ID, dbo.tblWorkSchedule.WorkScheduleLocation_ID, dbo.tblWorkSchedule.Inserted_DateTime,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN dbo.tblRateSchedule.DESCRIPTION ELSE dbo.tblWorkSchedule.Figure_Description END AS DESCRIPTION,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN tblRateSchedule.SWT ELSE tblWorkSchedule.WorkScheduleLocation_ID END AS SWT, dbo.tblCategory.Category,
dbo.tblScheduleStatus.Schedule_Status, CASE isnull(dbo.tblWorkSchedule.Rate, 0)
WHEN 0 THEN dbo.tblRateSchedule.Rate ELSE tblWorkSchedule.Rate END AS Rate, dbo.tblRateSchedule.WorkType_ID,
dbo.tblWorkSchedule.UpliftedRate AS UPLIFTED_RATE,
CASE dbo.tblWorkSchedule.WorkScheduleType_ID WHEN 1 THEN CASE IsNull(dbo.tblSurvey.WorkScheduleOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID)
END WHEN 2 THEN CASE IsNull(dbo.tblSurvey.VariationOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID) END END AS UpliftedRate,
CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN CONVERT(decimal(18, 2), IsNull(dbo.tblRateSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) ELSE CONVERT(decimal(18, 2), IsNull(dbo.tblWorkSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) END AS Total, dbo.tblCompany.IsContractor, dbo.tblCompany.Percentage AS Constructor_Percentage,
dbo.tblCompany.Percentage AS Contractor_Percentage, CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) ELSE ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) END AS After_Lift, ISNULL(dbo.tblSurvey.Survey_Completed, 0)
AS Survey_Completed, LTRIM(RTRIM(dbo.tblUser.User_Title)) + ' ' + LTRIM(RTRIM(dbo.tblUser.User_Forename))
+ ' ' + LTRIM(RTRIM(dbo.tblUser.User_Surname)) AS Inserted_By, dbo.tblWorkSchedule.Inserted_By AS InsertedBy_ID,
ISNULL(dbo.tblUploadedFile.File_Name, '') AS File_Name, dbo.tblWorkSchedule.Variation_ID,
dbo.tblHistoricalRateSchedule.Rate2006Period1, dbo.tblHistoricalRateSchedule.Rate2006Period2, dbo.tblHistoricalRateSchedule.Rate2007Period1,
dbo.tblHistoricalRateSchedule.Rate2007Period2, dbo.tblHistoricalRateSchedule.Rate2008Period1,
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate, dbo.tblRateSchedule.RateScheduleYear2008Period2Rate
FROM
View 1 Replies
View Related
May 31, 2008
Hi this is my first post i am hoping its the write place. I have a page in which a customer can either add a new product and its rate as well as update an existing product. What i am trying to achieve is get the live rate of the product, when a user goes to order the product. Each existing product can be updated twice in a year either in period 1 or period 2, therefore there is a possibility that a rate hasnt been updated which means the price should be the alst updated rate. Therefore the following are the possible rates which the product can have;
dbo.tblRateSchedule.Rate - This will be the rate when a product is new and has just been added, therefore no previous rates.
dbo.tblHistoricalRateSchedule.Rate2007Period2- Most existing products are still having this rate as their latest rate.
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate - This is the rate when a rate has been updated in 2008 period 1
dbo.tblRateSchedule.RateScheduleYear2008Period2Rate - This is the rate when a rate has been updated in 2008 period 2
What i am trying to do is get the latest rate as it stands in the system, based on the above scenarios. This what I have so far, i tried to use the ISNULL, however that didnt work for probably because there are four instances. The following is the "view" which returns the rates.
SELECT dbo.tblWorkSchedule.Survey_ID, dbo.tblWorkSchedule.WorkSchedule_ID, dbo.tblWorkSchedule.WorkScheduleType_ID,
dbo.tblWorkSchedule.ScheduleStatus_ID, dbo.tblWorkSchedule.Qty, dbo.tblRateScheduleUnit.Unit, dbo.tblWorkType.Work_Type_Description,
dbo.tblRateScheduleType.Type, dbo.tblWorkSchedule.MA_Code, dbo.tblRateSchedule.SOR_Code, dbo.tblSurvey.PropertyYear_ID,
dbo.tblSurvey.PropertyPeriod_ID, ISNULL(dbo.tblWorkSchedule.Valuation, 0) AS Valuation, dbo.tblSurvey.WorkScheduleOverallStatus_ID,
dbo.tblSurvey.VariationOverallStatus_ID, dbo.tblWorkSchedule.WorkScheduleLocation_ID, dbo.tblWorkSchedule.Inserted_DateTime,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN dbo.tblRateSchedule.DESCRIPTION ELSE dbo.tblWorkSchedule.Figure_Description END AS DESCRIPTION,
CASE IsNull(CONVERT(varchar, dbo.tblWorkSchedule.Figure_Description), '')
WHEN '' THEN tblRateSchedule.SWT ELSE tblWorkSchedule.WorkScheduleLocation_ID END AS SWT, dbo.tblCategory.Category,
dbo.tblScheduleStatus.Schedule_Status, CASE isnull(dbo.tblWorkSchedule.Rate, 0)
WHEN 0 THEN dbo.tblRateSchedule.Rate ELSE tblWorkSchedule.Rate END AS Rate, dbo.tblRateSchedule.WorkType_ID,
dbo.tblWorkSchedule.UpliftedRate AS UPLIFTED_RATE,
CASE dbo.tblWorkSchedule.WorkScheduleType_ID WHEN 1 THEN CASE IsNull(dbo.tblSurvey.WorkScheduleOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID)
END WHEN 2 THEN CASE IsNull(dbo.tblSurvey.VariationOverallStatus_ID, 0)
WHEN 4 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate(IsNull(tblRateSchedule.WorkType_ID, 0),
tblWorkSchedule.WorkSchedule_ID, tblSurvey.PropertyYear_ID, tblSurvey.PropertyPeriod_ID) END END AS UpliftedRate,
CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN CONVERT(decimal(18, 2), IsNull(dbo.tblRateSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) ELSE CONVERT(decimal(18, 2), IsNull(dbo.tblWorkSchedule.Rate, 0)) * CONVERT(decimal(19, 2),
IsNull(dbo.tblWorkSchedule.Qty, 0)) END AS Total, dbo.tblCompany.IsContractor, dbo.tblCompany.Percentage AS Constructor_Percentage,
dbo.tblCompany.Percentage AS Contractor_Percentage, CASE IsNull(dbo.tblWorkSchedule.Rate, 0) WHEN 0 THEN ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblRateSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) ELSE ((IsNull(tblCompany.Percentage, 0)
/ 100 * (CONVERT(decimal(18, 2), dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) + (CONVERT(decimal(18, 2),
dbo.tblWorkSchedule.Rate) * CONVERT(decimal(19, 2), dbo.tblWorkSchedule.Qty))) END AS After_Lift, ISNULL(dbo.tblSurvey.Survey_Completed, 0)
AS Survey_Completed, LTRIM(RTRIM(dbo.tblUser.User_Title)) + ' ' + LTRIM(RTRIM(dbo.tblUser.User_Forename))
+ ' ' + LTRIM(RTRIM(dbo.tblUser.User_Surname)) AS Inserted_By, dbo.tblWorkSchedule.Inserted_By AS InsertedBy_ID,
ISNULL(dbo.tblUploadedFile.File_Name, '') AS File_Name, dbo.tblWorkSchedule.Variation_ID,
dbo.tblHistoricalRateSchedule.Rate2006Period1, dbo.tblHistoricalRateSchedule.Rate2006Period2, dbo.tblHistoricalRateSchedule.Rate2007Period1,
dbo.tblHistoricalRateSchedule.Rate2007Period2, dbo.tblHistoricalRateSchedule.Rate2008Period1,
dbo.tblRateSchedule.RateScheduleYear2008Period1Rate, dbo.tblRateSchedule.RateScheduleYear2008Period2Rate
FROM
View 2 Replies
View Related
Sep 23, 2013
I have to produce a report, but not sure of the best way to get the required results
Aim - to count how many [FDMSAccountNo] there are per given [Month_end_date], and then do a case when on the[Retail_amount]
E.g.
10 Fdmsaccountno in Jan
Those 10 Fdmsaccountno vary in [Retail_amount]
I have 5 fdmsaccountno which are between %0 & £5
2fdmaccounno beterrn £6& £10
3 fdmsaccountno £10>
My query is
SELECT [FDMSAccountNo]
,[Month_end_date]
,[Retail_amount]
FROM [FDMS].[dbo].[Fact_Fee_History]
where [Fee_Sequence_Number] = '32r'
and Month_end_date between '2013-01-01' and '2013-12-01'
View 5 Replies
View Related
Sep 21, 2005
Currently I'm trying to add a column based on certain criteria based on the following data:
CallID GroupName CustomerPending
------ ----------- ------------
00500588FollowupN
00500588FollowupN
00500588Server N
00500588Service DeskN
00500588Service DeskN
Basically I'm trying to add an extra column, so that whenever the GroupName is "Followup", then a 'Y' will appear in the CustomerPending column for all instances of that CallID. I tried with the following, but it only provides a 'Y' in the rows (not the CallId's) where "Followup" is found.
--------------------------------------
UPDATE dbo.Asgnmnt
SET CustomerPending = 'Y'
FROM dbo.Asgnmnt
WHERE dbo.Asgnmnt.GroupName IN ('SD Followup')
ALTER Table Asgnmnt
ALTER column CustomerPending varchar(1)
UPDATE dbo.Asgnmnt
SET CustomerPending = 'N'
FROM dbo.Asgnmnt
WHERE dbo.Asgnmnt.GroupName NOT IN ('SD Followup')
ALTER Table Asgnmnt
ALTER column CustomerPending varchar(1)
---------------------------------------
Any assistance appreciated.
View 4 Replies
View Related
Sep 13, 2006
Hi
I would like to get records from a table and present a result set based upon the search fields
the search fields could be any of the following: PNo, Year, JNo, C1No6, C2No3, C3No3, C4No3,
they could enter any combination of these however if they dont enter any of the above then the search should not retrieve any thing. the table colunms are listed below and asample data set is also shown below.
Currently the only way i think it can be done is by writing multiple queries with different queries to be executed based upon the search field that have been filled? can it be done in a stored prcedure? and can it be done using non-dynamic sql?
Name, PNo, Year, JNo, C1No6, C2No3, C3No3, C4No3, RefImage
adam, 01, 1999, 099, 3yh333, 888, 989, 999, ref1999099.jpg
Brian, 01, 2005, 029, 3yh323, 828, 929, 929, ref1929099.jpg
sid, 04, 1989, 039, 3yh343, 838, 939, 939, ref1993399.jpg
jack, 06, 1996, 069, 3yh633, 868, 969, 969, ref1669099.jpg
View 12 Replies
View Related
Jan 2, 2007
I am trying to accomplish the following.
There are two tables. the second one is a table that contains fields based on which the exclusion logic has to be written. It has 5 fields and there may be data in all of them or only in some of them.
The first and second table have one field in common - the Account number.(ACCT_NUM)
the exclusion is based in steps..
1) if it has all the fields in the second table for that account number, then compare all of them..
2) if only 4 of them are present,compare and check for null for the rest
3) if only 3 of them are present,compare and check for null for the rest
4) if only 2 of them are present,compare and check for null for the rest.
how do i do this... pls suggest
Thanks
View 1 Replies
View Related
Jul 10, 2006
Hi,
I want to delete all files in a folder where creation date is an year older. I created a For Each Loop container to go over the whole folder and then execute the following Script Task
Dim FileArchive As Int16
Dim dteArchive As Date
Dim FilePath As String
FileArchive = CType(Dts.Variables("FileArchive").Value, Int16) ' One Year FileArchive = 365
dteArchive = DateAdd("d", -FileArchive, Now.Date)
FilePath = Dts.Variables("FilePath").Value.ToString
If File.GetCreationTime(FilePath) <= dteArchive Then
Try
File.Delete(FilePath)
Catch ex As Exception
'Do Nothing
End Try
End If
Dts.TaskResult = Dts.Results.Success
Is there a better approach to this? As most of the time job may have to delete 10 or 15 files but he has to read each file and then check the date if it matches the criteria and it delete.
View 1 Replies
View Related
Mar 21, 2006
Hello again,
Another combining multiple rows teaser, during a few routines I made a mistake and I would like to combine my efforts. Here is my data:
Code:
Table A
ID DSN VN AX Diag
1111296.54
3212318.00
Both DSNs share the same Patient_id in a seperate table which holds the DSN numbers and their corresponding patients.
Code:
Table B
DSN Patient_id
100000001
200000001
So what I need to do is maintain their unique 'ID' number in Table A but update their DSN numbers to reflect the first instance in Table B. So my data would look like this in both tables.
Code:
Table A
ID DSN VN AX Diag
1111296.54
3112318.00
Note: The second rows DSN changed to 1 from 2
Code:
Table B
DSN Patient_id
100000001
(Duplicate row removed with same patient_id)
The result would look like the above but as you noticed I need to remove the duplicate row that had the different DSN in Table B so that only one DSN remains that can map to multiple rows (IDs) in Table A.
Table A:
DSN can map to multiple rows (IDs)
IDs must be unique (aka kept to what they are currently)
Table B:
Second row with same DSN must be removed.
Any takes, ideas? I need to do this on a couple thousand rows....
Thanks, and im happy to clarify if needed.
View 1 Replies
View Related
May 9, 2007
***** SQL Server 2005 ********
I have a table that needs to be updated with a sequential number based on criteria.
I am trying to update the SeqID and LinkSeqID with the same sequential number if the ProductID and StoreID are in the same group. For instance the 1st three rows below are in the same group 752534 and 4, therefore the SeqID and LinkSeqID should be 1,2,3 and restart at 1 once the grouping of ProductID and StoreID changes. Please look at the examples below.
SALES Table as IS:
======================================
ProductID StoreID DBRowID SeqID LinkSeqID
======================================
752534 4 1
752534 4 2
752534 4 3
896784 2 4
896784 2 5
896784 4 6
898874 2 7
898968 2 8
This is what the table should look like after the update in complete.
SALES after UPDATE:
======================================
ProductID StoreID DBRowID SeqID LinkSeqID
======================================
752534 4 1 1 1
752534 4 2 2 2
752534 4 3 3 3
896784 2 4 1 1
896784 2 5 2 2
896784 4 6 1 1
898874 2 7 1 1
898968 2 8 1 1
Can anyone HELP me please?
View 4 Replies
View Related
Jan 31, 2014
I have inherited a query which currently returns multiple instances of each work order because of the joined tables. The code is here and I've detailed the criteria needed below but need the best way to accomplish this:
Select h.worknumber, h.itemcode, h.descr, h.task_descr, h.qty, h.itemised,
h.serialnum, h.manufacturer, h.model_id, h.depot, h.date_in, h.date_approved,
h.est_complete_date, h.actual_complete_date, h.meterstart, h.meterstop,
h.custnum, h.name cust_name, h.addr1, h.addr2, h.town, h.county, h.postcode,
h.country_id, h.contact, h.sitename, h.siteaddr1, h.siteaddr2, h.sitetown,
[Code] ....
Each work order should only be returned once, and with the following additional criteria:
1. i.meter - this should return only the lowest number from that file.
2. sm.next_calendar_date - this should return only the most recent date out of those selected for the certificates on this piece of equipment
3. wh.meterstop as [Last Service Hours],
wh.date_created as [Last Service] - this should return the number from wh.meterstop at the most recent wh.date_created for that piece of equipment.
View 1 Replies
View Related
Apr 25, 2008
Hello,
I need to create a query that will count new cases based on the create date(create_date) and criteria for the groups(The only way to distinguish between the 2 major groups mts and bnb is area!= 'bnb" because everything else is MTS). The sample report I need to create below shows how it needs to be counted weekly, for a 4 month period, for the groups under MTS and BNB. The totals and grand totals can be achieved in the report tool. I want to create variables for the new cases (mts_newcases_sales, mts_newcases_salesd, bnb_newcases_salesd etc)
Ex. MTS sales : (status = 'Calculated' OR status = 'REJECTED') and errorsource != 'marketing' and accountns is null and area != 'BNB'(everything else is MTS)
MTS salesd ; Credit >= '1001' and (status = 'REJECTEDV' or status = 'ACCEPTEDS') and errorsource != 'marketing' and accountnr is null
BNB creditr: Credit < 101 and (status = 'SUBMITTED' OR status = 'REJECTEDS' OR status = 'REJECTEDA' OR STATUS = 'ACCEPTEDC')
12-Jan
19-Jan
26-Jan
2-Feb
9-Feb
16-Feb
MTS
New Cases Received
85
84
79
98
79
95
Sales
30
32
27
40
42
38
SalesD
47
34
37
23
23
37
CreditR
44
29
26
35
55
54
CreditB
6
12
9
5
7
13
CreditS
-
-
-
-
3
-
CreditP
10
11
11
24
17
7
MTS Subtotal
140
125
110
144
151
150
BNB
New Cases Received
12
13
14
14
6
11
Sales
-
-
-
-
-
-
SalesD
-
-
-
-
-
-
CreditR
12
11
12
10
5
9
CreditB
8
13
9
17
16
6
CreditS
-
-
2
-
-
-
CreditP
1
1
1
1
4
3
BNB Subtotal
21
25
24
28
26
19
Total
New Cases Received
97
97
93
112
85
106
Sales
30
32
27
40
42
38
SalesD
47
34
37
23
23
37
CreditR
56
40
38
45
60
63
CreditB
14
25
18
22
23
19
CreditS
-
-
2
-
3
-
CreditP
11
12
12
25
21
10
Grand Total
161
150
134
172
177
169
This is just a very brief bit of code
SELECT MTS_new_cases_sales, mts_new_cases_salesd €¦€¦.
FROM vwCreditN
WHERE mts_sales_new_cases = ( )...
and (status = 'Calculated' OR status = 'REJECTED')...
Can you please show me how to accomplish this?
Thank you in advance for your effort,
Rhonda
View 2 Replies
View Related
Apr 17, 2008
Hi! I'm new to SQL and have a question...
I'm writing a script that gathers a few variables from an outside source, then queries a table and looks for a record that has the exact values of those variables. If the record is not found, a new record is added. If the record is found, nothing happens.
Basically my SELECT statement looks something like this, then is followed by an If... Else statement
SELECT * FROM TableName
WHERE LastName = varLastName
AND FirstName = varFirstName
AND Address = varAddress
If RecordSet.EOF = True Then
'Item Not Found, add new record
'code to add new record......
Else
'Item Found, do nothing
End If
RecordSet.Update
RecordSet.Close
Even when I try to delete the If.. statement and simply display the records, it comes up as blank. Is the syntax correct for my SELECT statement??
View 5 Replies
View Related
Feb 11, 2015
I was tasked with witing a stored procedure to send out emails based on certain criteria. One of our developers decided to take care of the criteria in another process and pass variables for me to use. I am not quite sure how to go about this, but below is what I started with. I declared his variables, and then set up a couple of my own for the email subject line and text.
create PROCEDURE [dbo].[SendWelcomeEmails]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
[Code] ....
Do I need to use a cursor or can I just specify using if, then else? Also not sure where to SET the individual subject lines.
View 2 Replies
View Related
Feb 14, 2008
Hi,
I would like to get some advises on how creating some kind of reports with Report builder
Lets say i have these two tables with these columns
Table Product
ProductName
Table ProductInstance
Product ID
CreationDate
CompletedDate
I would like to be able to create with report builder a report that looks this
Start Date : 2008/10/01 - End Date : 2008/10/30
Total Total Total
In Out OutStanding
ProductName1 10 0 3
ProductName2 5 5 2
ProductName3 8 8 5
ProductName4 12 5 6
Total In : total number of product created between StartDate and EndDate
Total Out : Total number of product completed between Start Date and End Date
Total OutStanding : Total number of product that have not yet been completed.
Any suggestion and advise on how to achieve this ?
View 2 Replies
View Related
Feb 13, 2008
I have a report with a date type parameter. Depending on the value return by this date type parameter the dataset will return either the credit, deposit or process date. How do I go about coding it so that it will dynamically select the right column in my query for my dataset?
Sincerely appreciate all the help I can get.
Thanks in advance.
View 11 Replies
View Related
Feb 20, 2007
Hi,how do I do a simple formula, which will search a field for specialcharacters and return a value.If it finds "%" - it returns 1elseIf it finds "?" it returns 2endIf this is the incorrect newsgroups, please direct me to the correct oneregards Jorgen
View 2 Replies
View Related
Apr 30, 2015
We were asked to create an SQL function to return a unit price based on various criteria. The function works fine except for the tiered pricing (use of BillingPriceTable) calculation. What we need to do is break up the total quantity passed to the function and return the total of prices found. In our example, we passed a quantity of 9,721 units and need to return a total price of 231.92 using the table below.
Low Qty    High Qty    Fee       Actual Qty       Price
0Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7500Â Â Â Â Â Â Â 0.025Â Â Â Â Â Â Â Â Â Â Â 7500Â Â Â Â Â Â Â Â Â Â 187.50
7501Â Â Â Â Â Â Â Â Â Â Â 15000Â Â Â Â Â Â Â 0.020Â Â Â Â Â Â Â Â Â Â Â 2221Â Â Â Â Â Â Â Â Â 44.42
Below is the table definition that we have to work with (ugghh).
CREATE TABLE [dbo].[BillingPriceTable](
[PriceTableID] [int] IDENTITY(1,1) NOT NULL,
[entity] [varchar](4) NULL,
[PriceTableCode] [varchar](10) NULL,
[PriceTableName] [varchar](40) NULL,
[Code] ....
What we have so far is shown below. The columns that start with bdxx are the "High Qty" values and the columns that start with prxx are the price for that quantity range. So, the current SELECT is shown below and it returns the price based on the entire qty of 9,721 and returns a unit price of 0.020 and should return 0.023857628
The current SELECT is shown below and is returning 0.020 which is the fee for the total rather than calculating the fee twice, once for the 0-7500 and again for the 7501-15000 (actually 7501-9721). Two things came to mind, one was a WHILE loop and the other was possibly a ranking function of some sort.Â
ALTER FUNCTION [dbo].[fn_GetPrice]
(
@plincdvarchar(3),
@pgrpcodevarchar(4),
@pitmcodevarchar(4),
@qtydecimal(10,1) = 1,
@corpnbrvarchar(9)
)
[Code] ....
View 9 Replies
View Related
