T-SQL (SS2K8) :: How To Add Manual Column Based On GroupBy For Title
Jan 15, 2015
I have a query to get data group by High, Medium and Low so only three rows will be returned.
select
sum(case .... ) then 1 else 0 end) as [Column1],
sum(case .... ) then 1 else 0 end) as [Column2],
sum(case .... ) then 1 else 0 end) as [Column3]
from sometable
Group by High, Medium, Low
I want to manually add High, Medium and Low to each row's first column. the final result should look like:
Column1 Column2 Column3
High 123 123 123
Medium 123 123 123
Low 123 123 123
I am trying to pivot data based on columns value in year column... but results are not showing up correctly. I want to see all columns after pivot.I want to Pivot based on year shown in the data but it can be dynamic as year can go for last 3 years
I am also using an inner join as i have two amount columns in my code and i want to show both amount columns for all displayed year.I am able to pivot but I need in output all the columns like this Id,MainDate, Year1,Year2,Year3(if any), AMT1 for YR1, AMT2 for Yr1, , AMT1 for YR2, AMT2 for Yr2, AMT1 for YR3, AMT2 for Yr3,
Here is some data:
-- CREATE TABLE [dbo].[TEMP]( --[FileType] [varchar](19) NOT NULL, --[dType] [char](2) NOT NULL, --[dVersion] [char](2) NOT NULL, --[Id] [char](25) NOT NULL, --[MainDate] [char](40) NULL,
I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:
select [uplift specialty], [member po],[practice unit name], [final nomination status] ,[final uplift status], [final rank], [final uplift percentage] ,practiceID=row_number() over (partition by [practice unit name] order by Metricname) ,metricname,Metricvalue, metricpercentilerank
[code]....
Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:
I have a table that is a very general layout so I can expand upon values later in the future easily. Basically it looks like this:
Code:
ID PlayerID Ability Score 1 1 STR 18 2 1 DEX 17 3 1 CON 16
What I'm trying to do is create a stored procedure where I pass in a PlayerID and it will return a result set of
Code:
STR DEX CON 18 17 16
It doesn't appear that there's a way in SQL Server 2000 to SELECT a column AS a variable. I suppose I could go about creating a temporary table, but seems like an odd work around to get it to work. Any suggestions? Or am I just missing something obvious?
Is there any way to give Title to matrix row and column groups?
I know If i have only one row i can give title in the textbox provided at the top of the Rows group area. But i have more than one row and group and more than one column group. i want to give title to all of them.
In a title of a column of a table, I put a too long text, with sorting, but when I spread (display) the report has a problem on text of the title of the column there.
The probleme settles (arises) when I activate the sorting to post (show) the image of sorting.
I have a SSRS report in which we have a subreport i am trying to hide the link in excel after exporting from report documents, in report my logic is working fine but when we are deploying in SharePoint application then it is not working. Report is not opening.
I am designing a dimension table which will include a short name column based on the (full) name column. For example say Product dimension where I will have ProductName and ProductShortName. ProductShortName will be the first 6 characters of ProductName. I could populate ProductShortName using:
Substring in the select when I select from the original system, e.g. SUBSTR(PRODUCT_NAME, 1, 6) AS ProductShortName
Create a derived column in the SSIS flow which does the same thing
Create the ProductShortName column as a computed column which uses substring on ProductName
Create a trigger that populates ProductShortName based on ProductName when a row is inserted or updated
Create a named calculation in the table in the Analysis Services project's data source view
Create a named query in the Analysis Services project's data source view
I usually use 1, and 5 or 6 would only be used if I only will create reports against the cubes. 3 seems easiest to maintain, so I am thinking about using that one, but maybe it is slow for the data flow as I imagine it must be something like using 4, or when is the column "created" at runtime, i.e. when the table is queried? Which approach(es) do or would you use? Pros and cons?
I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A B C D E F G H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
I am trying to code a rule at the moment which sets a value based on the value of the previous row. This is as far as I have got so far. I am trying to run it as a set based command and I believe I may need to make use of a numbers table.
Anyway the code is....
declare @data table (ID int identity(1,1), DeviceID int, EventTypeID int, EventID int)
[Code] ....
So the output is currently incorrect. Each DeviceID needs to have a ID assigned to the MIN(ID) which isn't yet in the code above. This ID has to be sequential across the full table and not dependent on ID.
Next the rule is coded in the case statement above.
So for each DeviceID, when the EventType goes from 1, 2 or 4, to 0 or 3, the following record after the 0 or 3 will have a new EventID. And conversely when the EventType goes from 0 or 3 to 1,2, or 4, the record that is the 1, 2 or 4 will have a new EventID.
I have a scenario where i need to get the starting and ending date time based on the crieteria. The criteria is I always have my start date as NS or GS in the data column and my end date as GX so i need NS or GS to be my strart date based on ts Ascending and my end date as GX to be displayed in the same columns .
Create Table Test (Tsq INT IDENTITY (1,1), Data Varchar (150), ts datetime, Tpkt_type int) insert into test values ('GS,000020,000021,000022,000023','2013-11-13 09:47:35.963','2')
Table Master --------------------------- EmpID EffectiveDateFr Group 00001 1/1/2014 A 00001 1/5/2014 B 00001 1/9/2014 C 00001 2/1/2014 B 00001 2/20/2014 A ....
I want to create query the output should be:
EmpID TransDate Group 00001 1/1/2014 A 00001 1/2/2014 A 00001 1/3/2104 A 00001 1/4/2014 A 00001 1/5/2014 B 00001 1/6/2014 B 00001 1/15/2014 C 00001 2/1/2014 B 00001 2/2/2014 B 00001 2/20/2004 A
I am working on a report and the data source is Teradata. now I have situation where I want to get order id details based on the current quarter and year I am posting this same data. For TD related queries I do not where to post.
I have 57 tables, 7 views and 1 stored procedure. Just wanted know based on these requirements how can I find the size of the database. Though the DB contains lots of tables, views and procedures. I am moving these details to new DB server. So I need to put right requirements.
I have an SSRS Report that I created. I'd like to set up a job that will run every hour, and what the job will do is send an SSRS report to a select group of recipients when a certain criteria is met. How do I go about doing this? My SSRS knowledge is very limited.
Additional Info:I created the report with a one time schedule to a certain email address. I do see the report schedule in the reportserver DB. Because I already have the schedule and the subscription id, I think all I have to do is call that subscription, but that's where I'm lost.
I need to write SP where user select SUN to MON check boxes. If user select Class A with sun,mon and wed check boxes then i need to insert data as below
Auto_ID Account_ID Account_Name Account_Contact Priority 1 3453463 Tire Co Doug 1 2 4363763 Computers Inc Sam 1 3 7857433 Safety First Heather 1 4 2326743 Car Dept Clark 1 5 2342567 Sales Force Amy 1 6 4363763 Computers Inc Jamie 2 7 2326743 Car Dept Jenn 2
I'm trying to delete all duplicate Account_IDs, but only for the highest priority (in this case it would be the lowest number).
I know the following would delete duplicate Account_IDs:
DELETE FROM staging_account WHERE auto_id NOT IN (SELECT MAX(auto_id) FROM staging_account GROUP BY account_id)
The problem is this doesn't take into account the priority; in the above example I would want to keep auto_ids 2 and 4 because they have a higher priority (1) than auto_ids 6 and 7 (priority 2).
How can I take priority into account and still remove duplicates in this scenario?
We have a database where many tables have a field that has to be lengthened. In some cases this is a primary key or part of a primary key. The table in question is:-
/****** Object: Table [dbo].[DTb_HWSQueueMonthEnd] Script Date: 09/25/2014 14:05:09 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[DTb_HWSQueueMonthEnd](
[Code] ....
The script I am using is
DECLARE@Column varchar(100)--The name of the column to change DECLARE@size varchar(5)--The new size of the column DECLARE @TSQL varchar(255)--Contains the code to be executed DECLARE @Object varchar(50)--Holds the name of the table DECLARE @dropc varchar(255)-- Drop constraint script
[Code] ....
When I the the script I get the error message Could not create constraint. See previous errors.
Looking at the strings I build
ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] DROP CONSTRAINT PK_DTb_HWSQueueMonthEnd ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] Alter Column [Patient System Number] varchar(10) ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] ADD CONSTRAINT PK_DTb_HWSQueueMonthEnd PRIMARY KEY NONCLUSTERED ([Patient System Number] ASC,[Episode Number] ASC,[CensusDate] ASC) WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
They all seem fine except the last one which returns the error
Msg 8111, Level 16, State 1, Line 1 Cannot define PRIMARY KEY constraint on nullable column in table 'DTb_HWSQueueMonthEnd'. Msg 1750, Level 16, State 0, Line 1 Could not create constraint. See previous errors.
None of the fields I try to create the key on are nullable.
To give you some context we have a new amendments application (nothing fancy, excel based with SQL Server back end) that allows users to submit amendments to product data (Product Info, PO Prices, Dates etc.). There is also an admin tool that a team uses to action these amendments in the various systems.
The old version of this tool, users submitted amendments by style and could if need be submit multiple amendments against one product at the same time. The new tool, I believe for audit reasons, users submit by amendment type, so for example I would submit a cost price change for a given style.
The issue now is that on the occasions where a user has multiple amendments, they now come through separately. So cost price would be Amendment 1 and a date change would be amendment 2 even though they could be the same product. This could potentially mean that the admin team would be duplicating work if the paperwork is updated and sent after each amendment, whereas before they would make both changes and only send the paperwork once.
Having not built either of these tools, I've been tasked with trying to fix this, my two thoughts being either to amend the user form to somehow capture/ allow users to submit amendments together or try to use the existing data and doing the grouping dynamically in the back end. Use that lag to look at grouping any submitted amendments that occur within 30mins of the first occurrence of that style
This grouping would then be given a joint time so when the 'time lag' period passes the amendments will be visible together.I've tried a few things and a few head on desk moments trying to get a set based approach but haven't been able to get where i want, its either an issue where amendments span an hour, such as 9:59 and then 10:03 or grouping together amendments that happen after the 30mins of the first one.
Here is some sample data
USE FF_Winning_Together; IF OBJECT_ID(N'tempdb..#AmendTest',N'U') IS NOT NULL DROP TABLE #AmendTest; CREATE TABLE #AmendTest ( AmendmentIDINT IDENTITY(1,1)NOT NULL, StyleCHAR(1)NOT NULL, AmendmentStatusVARCHAR(10)NOT NULL, DTDATETIMENOT NULL
create table #myfirst (id int, city varchar(20)) insert into #myfirst values (500,'Newyork') insert into #myfirst values (100,'Ediosn') insert into #myfirst values (200,'Atlanta') insert into #myfirst values (300,'Greenwoods') insert into #myfirst values (400,'Hitchcok') insert into #myfirst values (700,'Walmart') insert into #myfirst values (800,'Madida')
-- My Second Data
create table #mySecond (id int, city varchar(20),Sector varchar(2)) insert into #mySecond values (1500,'Newyork','MK') insert into #mySecond values (5500,'Ediosn','HH') insert into #mySecond values (5060,'The Atlanta','JK') insert into #mySecond values (7500,'The Greenwoods','DF') insert into #mySecond values (9500,'Metro','KK') insert into #mySecond values (3300,'Kilapr','MK') insert into #mySecond values (9500,'Metro','NH')
--Third Second Data
create table #myThird (id int, city varchar(20),Sector varchar(2)) insert into #myThird values (33,'Walmart','PP') insert into #myThird values (20,'Ediosn','DD') select f.*,s.Sector from #myfirst f join #mySecond s on f.city = s.city /* idcitySector 500NewyorkMK 100EdiosnHH */
i have doubt on two things
1) How Can i compare the City names, by eliminating 'The ' at the beginning (if there is any in second tale city) between first and second
2) after comparing first and second if there is no match found in second them want to compare with third table values for those not found
--i tried below to solve first doubt, it is working but want to know any other wasys to do it
select f.*,s.Sector from #myfirst f join #mySecond s on replace (f.city, 'THE ','')= replace (s.city, 'THE ','')
--Expected results wull be
create table #ExpectResults (id int, city varchar(20),Sector varchar(2)) insert into #ExpectResults values (200,'Atlanta','JK') insert into #ExpectResults values (100,'Ediosn','HH') insert into #ExpectResults values (300,'Greenwoods','DF') insert into #ExpectResults values (500,'Newyork','MK') insert into #ExpectResults values (700, 'Walmart','PP') insert into #ExpectResults values (800, 'Madidar','')
i've been looking at moving one of our processed from excel (+vba) into t-sql to make life easier but am stuck.
We have lots of tasks that are assigned to work groups which we want to distribute evenly across the work groups. This is a simple task for ntile.. However when these tasks are no longer required they are removed which leaves the groups uneven. When new tasks are added we want to still try to keep these groups balanced.
Create table Jobs(jobid int identity(1,1), name varchar(100),Groupid int)
--Existing tasks
Insert into Jobs(name,Groupid) values ('Task1',1) Insert into Jobs(name,Groupid) values ('Task2',1) Insert into Jobs(name,Groupid) values ('Task3',1) Insert into Jobs(name,Groupid) values ('Task4',1) Insert into Jobs(name,Groupid) values ('Task5',2) Insert into Jobs(name,Groupid) values ('Task6',2) Insert into Jobs(name,Groupid) values ('Task6',2) Insert into Jobs(name,Groupid) values ('Task7',3)
-- New tasks
Insert into Jobs(name) values ('TaskA') Insert into Jobs(name) values ('TaskB') Insert into Jobs(name) values ('TaskC') Insert into Jobs(name) values ('TaskD') Insert into Jobs(name) values ('TaskE') Insert into Jobs(name) values ('TaskF')
This gives us 6 unassigned tasks and a uneven group assignment
I need to retrieve the pts from table #test1 based on the fields when mapped..
Name & Type columns should match ..Based on the data below the output should be
id NameTypeCode CityIType BPS 1EGFN432 HY F2 10 2 EG FN 432 ON F1 20 3 EG FN 433 On F1 30
It has order of priority to get points
1.When all of the field matches then get the respective pts . 2.When name and Type matched and rest fields doesnt match but is null in #test2 table then retrieve those pts
--drop table #test --drop table #test1 Create table #test ( id int identity(1,1) not null, Name varchar(100) NULL,
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16. Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100); DECLARE @Total NVARCHAR(100); SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total) FROM [Totals]
Using MDS 2012: I have an entity "XYZ_Entity". In "XYZ_Entity" entity I have 2 domain based Columns "DealerGroup" and "Dealer".
While inserting information into "XYZ_Entity" entity user can select the required dealer group from domain base Dealer Group values. Now for selecting Dealer he wants the dealers to be filter based on selected dealer group and he can select from the filtered list. reason to do that is he don't want to go through thousands of dealers and select an incorrect one.
Hi,Suppose I have a table containing monthly sales figures from my shopbranches:Branch Month Sales-----------------------London Jan 5000London Feb 4500London Mar 5200Cardiff Jan 2900Cardiff Feb 4100Cardiff Mar 3500The question I am trying to ask is this: in which month did each branchachieve its highest sales? So I want a result set something like this:Branch Month----------------London MarCardiff FebI can do a "SELECT Branch, MAX(Sales) FROM MonthlySales GROUP BY Branch" totell me what the highest monthly sales figure was, but I just can't figureout how to write a query to tell me which month corresponded to MAX(Sales).Ideas anyone?Cheers,....Andy
