We have 2 columns:
StartDate - data type Date
StartTime - data type Time
I need to combine them into a DateTime data type. For now, I convert each of them into varchar, insert space in between, and convert to DateTime, like this:
convert(datetime, convert(varchar(10), EndDate , 101) + ' ' + CONVERT(varchar(20), EndTime,24))
Is there a better, more elegant way to do this?
I have a standard datetime and I need to convert it to the client specification of:
YYYY-MM-DDThh:mm:ssTZD
eg: 2009-04-16T19:20:30+08:00
I am not sure of the easiest way to do this.
The test code below gets me part of the way but I am unsure on how to get the offset on the end without hardcoding to much.
DECLARE @datetime DATETIME = '2014-12-20 12:30:00'
SELECT CONVERT(VARCHAR(30),@datetime,127)
I have a datetime field for e.g 2015-09-15 00:00:00.000 and an integer field for e.g.100809.
The integer field is actually a time value as in hours,minutes,seconds. For e.g. the value
100809 means
10-hours
08-minutes
09-seconds
I need to combine the datetime and the int field to get the output as below
2015-09-15 10:08:09
I've been trying to do the following:
Code Snippet
if year(@SomeDateTime) <> @SomeYear
set @SomeDateTime= convert(datetime, @SomeYear+ '1231', 112)
If variable @SomeDateTime evaluates to 20080101 and @SomeYear = 2006, I wish that my variable @SomeDateTime becomes 20061231 (December 31st).
The way it's written now, it doesn't work... @SomeDateTIme evaluates to 1908-11-12.... ?!
Working on a new database where the Date and Time are stored in a Date Time Field.
Then working on an OLDER database file within the same SQL Database contains these 2 items as integers:
transDate = "71615" (July 16, 2015)
transTime = "12345" (01:23:45 AM)
How do we convert both of them into a single SQL DateTime field such as "2015-07-16 01:23:45.000" so that it can be used in a join restricting to a date time in a different SQL File that properly has the DateTime in it?
This works well for converting the transDate Part in the select statement:
dbo.IntegerToDate(at.transDate) as transDate
* That returns: "2015-07-16 00:00:00.000"
* The resulting data must work directly in a Microsoft SQL Server Management Studio Query using either using the "on" statement or part of the "where" clause. In other words, NOT as a stored procedure!
Also must be able to be used as a date difference calculation when comparing the 2 files Within say + or - 5 seconds.
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies View RelatedI am inserting date and time data into a SQL Server 2012 Express table from an application. The application is providing the date and time as a string data type. Is there a TSQL way to convert the date and time string to an SQL datetime date type? I want to do the conversion, because SQL displays an error due to the
My date and time string from the application looks like : 3/11/2014 12:57:57 PM
I've used some info on here to generate random dates within a given range and also random times - independently they work fine, but I can't seem to join them into a single field of datetime. I'm not sure why. The following snippet works fine as two independent fields:
select CAST(CAST(ABS(CHECKSUM(NEWID()))%(780)+(33968) AS DATETIME) as DATE) as theDate,
CAST(CAST(DATEADD(milliSECOND,ABS(CHECKSUM(NEWID()))%86400000 ,'00:00') AS TIME) as varchar(50)) as theTimeBut when I try to make it a single datetime field:
select CAST(cast(cast(CAST(ABS(CHECKSUM(NEWID()))%(780)+(33968) AS DATETIME) as date) as varchar(50)) + ' ' + cast(CAST(CAST(DATEADD(milliSECOND,ABS(CHECKSUM(NEWID()))%86400000 ,'00:00') AS TIME) as varchar(50)) as varchar(50)) as datetime)
Which returns with: Conversion failed when converting date and/or time from character string.
So what I am really looking for is a way to join those two values into a single datetime field... Or failing that that how to generate random dates within a range including random times...
i am trying to take a field that has part of a date in it, so I have to parse it out as follows:
SUBSTRING(a1.Field1, 3, 2) + SUBSTRING(a1.Field1,5,2) + '20' + LEFT(a1.Field1,2)
This is because a date of 04/16/2014 will show as 160416 in the first part of the field I need to parse it out of, thus becoming 04162014.
From there I then need to convert this "date" into a legitimate SQL datetime type, so that I can then run a DATEDIFF to compare it to when the record was actually entered, which is a separate field in the table, and already in datetime format.
When I use the below statement, I am getting the message that, "Conversion failed when converting date and/or time from character string."
CAST((SUBSTRING(a1.Field1, 3, 2) + SUBSTRING(a1.Field1,5,2) + '20' + LEFT(a1.Field1,2)) as datetime)
I also tried CONVERT(datetime, (SUBSTRING(a1.Field1, 3, 2) + SUBSTRING(a1.Field1,5,2) + '20' + LEFT(a1.Field1,2)), and got the same message.
how I can parse that field, then convert it to a datetime format for running a DATEDIFF statement?
I am trying to produce a report that will show a duration in minutes of a time when a room was occupied for a category. Whilst I have the start and end dates and times, the end user must be able to specify not only a range of dates, but a start and endtime of hours in the day in which they are interested in (it will be applied to all days in the range - they are not allowed to specify a different start/endtime per day).
The example I have is a date range of 6 to 17 October, but they only want the times from 09:00 to 21:00, so if a room was occupied from 08:00 to 11:00 they would only want to know the duration as 120 minutes (09:00 to 11:00) not 180.
The data is supplied by a third party, and duration in minutes is supplied, but it is not much use when they are not interested in the 'real' duration.
CREATE TABLE [dbo].[Evts](
[Location_name] [nvarchar](200) NULL,
[Event_Category] [nvarchar](500) NULL,
[Start_Time] [datetime] NULL,
[End_Time] [datetime] NULL,
[Duration] [int] NULL
[Code] ....
---but the expected output is
Location_nameEvent_Categoryduration
RS8CM240
RS8OD480 -- eliminating 08:00 - 09:00 on 17th
RS8OOT300 -- eliminating 08:00 - 09:00 on 13th
RS8SCC150
RS8SODT1740
RS8 SODT180
RS8SODTB60
RS8SODTNT180
RS8TR60
Looking for info regarding to the minute calculation when the start time specified by the user differs from that of the actual startime?
I want to convert a datetime type into and speciically formatted time:the table contains this:1899-12-30 10:00:00.000I want to reformat it to appear like this:10:00 AM I want to do this with SQL using a CONVERT of something along that line.I've been able to find all kinds of date and date/time formats, but not time alone in the above format.And suggestions?TIA</chaz>
View 3 Replies View RelatedHi there.
I'm trying to extract data from my SQL server & everything in the script I've got is working (extracting correct data) except for one field - which is for the most part it's off by +2 days (on a few occasions - I see it off by just +1 day or even +3, but it's usually the +2 days).
I'm told that it's due to the conversion formula - but - since SQL is not my native language, I'm at a bit of a loss.
The DB table has the date field stored as a type: CHAR (as opposed to 'DATE')
Can anyone out there help?
Please advise. Thanks.
Best.
K7
How to convert bigint time to datetime (CST)
Declare @MyBigIntTime BIGINT =1397750400000
I'm importing dates into a table with Bulk insert
SET DATEFORMAT DMY
it works with dates e.g. "14/01/2009"
However sometimes I get dates in the format
"Fri 14/01/2009"
What is the best way to convert these.
I can only think of putting them in a staging table with all date fields as varchars Then updating these varchar fields
LTRIM(REPLACE(dtField, 'Mon', ''))
LTRIM(REPLACE(dtField, 'Tues', ''))
Hi
i have the following situation. in my database i have a datetime field (dd/mm/yy hh:mms) and i also have a field timezone.
the timezone field has values in minutes that i should add to my datetime field so i have the actual time.
afterwards i split the datetime into date and time.
the last part i can accomplish (CONVERT (varchar, datetime, 103) as DATEVALUE and CONVERT (varchar, DATETIME, 108) as TIMEVALUE).
could anybody tell me how i can add the timezone value (in minutes) to my datetime value ?
i do all the calculations in my datasource (sql).
Thanks
V.
I have passed createdDate from UI to Stored procedure.createdDate field declared with DateTime.it is having value 2014-07-01.I need to fetch records from the database based upon the created field.but Create_TM in database having value Date with timestamp.so how would i change the createdfield in stored procedure.
ALTER PROCEDURE [dbo].[ByDateRange]
@Feed VARCHAR(50),
@CreatedDate DATETIME
select * from Date_table where Create_TM = @CreatedDate
I am trying to convert a date-string of this format (DDMMMYY - ex. 06JAN15) to datetime but I keep on getting errors:
codes that I tried:
convert(datetime, '06JAN15', 6)
convert(datetime, '06JAN15', 112)
What date format code should I use for DDMMMYY?
This UDF will strip off the time portion of a DateTime. It can give you either midnight last night, or midnight tonight.
Lets say you have two datetime values @dateStart and @dateEnd, and you want to select records between these dates (excluding any time portion), then you would do:
SELECT *
FROM MyTable
WHERE MyDateTimeColumn >= dbo.kk_fn_UTIL_DateRound(@dateStart, 0)
AND MyDateTimeColumn < dbo.kk_fn_UTIL_DateRound(@dateEnd, 1)
If you want to display dates, without the time, then do:
SELECT dbo.kk_fn_UTIL_DateRound(MyDateColumn, 0) AS [My Date]
FROM MyTable
--
PRINT 'Create function kk_fn_UTIL_DateRound'
GO
IF EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[kk_fn_UTIL_DateRound]') AND xtype IN (N'FN', N'IF', N'TF'))
DROP FUNCTION dbo.kk_fn_UTIL_DateRound
GO
CREATE FUNCTION dbo.kk_fn_UTIL_DateRound
(
@dtDatedatetime,-- Date Value to adjust
@intRoundint-- 0=Round down [Midnight last night], 1=Round up [Midnight tonight]
)
RETURNS datetime
/* WITH ENCRYPTION */
AS
/*
* kk_fn_UTIL_DateRoundConvert date to midnight tonight
*For a "limit" date of '01-Jan-2000' the test needs to be
*MyColumn < '02-Jan-2000'
*to catch any item with a time during 1st Jan
*
*SELECTdbo.kk_fn_UTIL_DateRound(GetDate(), 0)-- Midnight last night
*SELECTdbo.kk_fn_UTIL_DateRound(GetDate(), 1)-- Midnight tonight
*
* Returns:
*
* datetime
*
* HISTORY:
*
* 28-Jul-2005 KBM Started
*/
BEGIN
SELECT@dtDate = DATEADD(Day, DATEDIFF(Day, 0, @dtDate)+@intRound, 0)
RETURN @dtDate
/** TEST RIG
SELECT'01-Jan-2000', dbo.kk_fn_UTIL_DateRound('01-Jan-2000', 0)
SELECT'01-Jan-2000', dbo.kk_fn_UTIL_DateRound('01-Jan-2000', 1)
SELECT'01-Jan-2000 01:02:03', dbo.kk_fn_UTIL_DateRound('01-Jan-2000 01:02:03', 0)
SELECT'01-Jan-2000 01:02:03', dbo.kk_fn_UTIL_DateRound('01-Jan-2000 01:02:03', 1)
SELECT'28-Feb-2000 01:02:03', dbo.kk_fn_UTIL_DateRound('28-Feb-2000 01:02:03', 0)
SELECT'28-Feb-2000 01:02:03', dbo.kk_fn_UTIL_DateRound('28-Feb-2000 01:02:03', 1)
SELECT'29-Feb-2000 01:02:03', dbo.kk_fn_UTIL_DateRound('29-Feb-2000 01:02:03', 0)
SELECT'29-Feb-2000 01:02:03', dbo.kk_fn_UTIL_DateRound('29-Feb-2000 01:02:03', 1)
**/
--==================== kk_fn_UTIL_DateRound ====================--
END
GO
PRINT 'Create function kk_fn_UTIL_DateRound DONE'
GO
--
Kristen
Does anybody can help me to convert datetime value let's '1936-04-1307:00:00.000' to DATE as '04/13/1936'. I need this value in the Excell asa DATE format.Thanks in advance
View 2 Replies View RelatedHello,
I have a column called 'FileDate' that is NUMERIC (18,0). The format is YMMDD. A sample of March 1st and 2nd, 2008:
80301
80302
Is there a way to convert/cast this to DateTime or SmallDateTime?
Thank you for your help!
cdun2
How to get this out put.
Details:
declare @deadline Datetime = '2014-03-23 15:30:10.000'
SELECT CONVERT(VARCHAR(30),@deadline, 100) AS DateConvert
----With this I am able to produce that like
----o/p: Mar 23 2014 3:30PM
declare @deadline1 Datetime = '2014-03-03 15:30:10.000'
SELECT CONVERT(VARCHAR(24),@deadline1, 100) AS DateConvert
--o/p: Mar 3 2014 3:30PM
--expected O/p: Mar 03 2014 03:30PM
What is the correct date format to achieve this.
In SQL Server 2000:
How do I convert a Julian date to a Gregorian date?
How do I convert a Gregorian date to Julian?
Examples please.
Many thanks in advance.
Gary Andrews
I have define two variable of Datetime type @Sdate and @Edate.
1. @Sdate = DATEADD ("DD", -5, GETDATE())
2. @Edate = GETDATE()
3. Using Forloopcontainer for pulling the data into batches
( @sdate = dateadd ( "HH" , 1, @sdate))
Now since i am using getdate() to define @Sdate. my variable gets data as ( 2014/12/08 11:43:00AM)
Converting GETDATE( 2014/12/08 11:43:00AM) to only date 2014/12/08 00:00:00AM.
I tired using DT_WSTR which works fine (converting datetime int String).
Problem occurs when i am going through For Loop container . Since i have used assignment of @Sdate is says its not allowed.
Hello forum,
Is it possible to convert a date stored as a string into a datetime with integration services 2005? My attempts with the ��data conversion�? fail. The string type form of the date is ��yyyy-mm-dd�� and the desired result for use in a Union All is ��dd/mm/yyyy 12:00:00AM.�� This outcome is needs so that match on the date can populate a fact table, as the results are coming from two different databases.
All advice/help welcomed.
Ian
I have a field that I would like to only display the date as mm/dd/yyyy. Current field shows mm/dd/yyyy hh:mm:ss AM.
View 10 Replies View RelatedI have a table in which a date value is stored as varchar.some of these values are stored ina dd/mm/yyyy format and other values are stored in a yyyy-mm-dd format..Now I wish to retrieve some data by querying between two dates. However I need to convert the varchar date value to datetime in order to do this but since the date value is in two different formats, the following doesn't work.
select date_value
from my_table
where CONVERT(DATETIME, date_value, 103) between @date1 and @date2
How can you convert the date value to datetime when its stored in mutiple formats. I can't change the table itself as I dont have admin privelages.
I need to create a sp for sql 2000 to run with Crystal 7. (No I can't upgrade the crystal). The user wants the calendar prompt to be issues when Crystal with the calendar function. The problem is that if I define the sp var to be passed in as a datetime, crystal wants the hh mm ss also. if I issue it as a varchar(10) and convert it in my select it won't bring up the calendar control. Never tried this but I am guessing you can't do a convert on a var you feed from an sp like below
create procedure checkdate @date convert(varchar(10),@date,101)
as
select * from patient_medication where create_timestamp > @date
Any ideas?
I have a field that contains only a date, and a field that only contains times. If I try to add the two together, I get some meaningless date like year 2111.
The raw data looks like this
EVT_DT='2005-12-05 00:00:00'
EVT_TM='2005-12-06 13:59:00' //today's date
I wrote a function that gives me the minutes past midnight for the EVT_TM
and use a dateadd(n,myMinutesFuntion(EVT_TM),EVT_DT), but it kills the performance in the nexted cursor.
Thanks,
Carl
Hello,
I have tried a few different things within a Derived Column transform to convert a unicode yymmdd date string to SQL Server DateTime.
Does anyone have ideas on how to do this?
Thank you for your help!
cdun2
My goal is to update the "PriorInsert" field with the "DateInserted" from the previously inserted record where the WorkOrder, MachineNo, and Operator are all in the same group.
While trying to get to the correct previous record, I wrote the query below.
P.S. The attached .txt file includes a create and insert tbl_tmp sampling.
select top 1
a.ID,
a.WorkOrder,
a.MachineNo,
a.Operator,
a.PriorInsert,
[code]...
i have a sql statement that i created in code and it is sending a query to the database
when i dim the variable a datetime variable it says that it cant convert it
if i make the variable a varchar it works but it only returns one result when it should be returning about 10
here is the code
Public Function dbDGQSSearch(ByVal BatchID As String, ByVal CreatedBy As Integer, ByVal CreatedFor As Integer, ByVal DateCreatedMod As Integer, ByVal DateCreated As String, ByVal DateCompletedMod As Integer, ByVal DateCompleted As String, ByVal DateStartedMod As Integer, ByVal DateStarted As String, ByVal SearchType As Integer, ByVal Completed As Integer, ByVal PriorityMod As Integer, ByVal Priority As Integer, ByVal RemainingCallsMod As Integer, ByVal RemainingCalls As Integer, ByVal TotalCallsMod As Integer, ByVal TotalCalls As Integer, ByVal Bonus As Integer, ByVal Keyword1 As String, ByVal Keyword2 As String, ByVal Keyword3 As String, ByVal Keyword4 As String, ByVal Keyword5 As String)
Dim strQueSearch As String
strQueSearch = "SELECT tlkup_Rep.RepID, tlkup_Rep.PositionID, tlkup_Rep.RepFName, tlkup_Rep.RepLName, tlkup_Rep.RepPassword, tlkup_Rep.RepUserName, tlkup_Rep.RepFName + ' ' + tlkup_Rep.RepLName AS RepName, t_Que.QueID, t_Que.BatchID, t_Que.AdminID, t_Que.Manager, t_Que.BonusID, t_Que.QueCompleted, t_Que.QueDate, t_Que.QueNotes, t_Que.QuePriority, t_Que.QueQuantity, t_Que.QueStartDate, t_Que.Mail, t_Que.QueDateComplete, t_Que.QueTotal FROM t_Que INNER JOIN tlkup_Rep ON t_Que.Manager = tlkup_Rep.RepID AND t_Que.Manager = tlkup_Rep.RepID WHERE BatchID<>'' and BatchID<>'2' and BatchID<>'3' and BatchID<>'4' "
'Creates statement for selecting the add to batch data where the criteria appear
If BatchID <> "" Then
strQueSearch = strQueSearch + " and t_Que.BatchID= @BatchID "
End If
If CreatedBy > 1 Then
strQueSearch = strQueSearch + " and t_Que.RepID =@RepID "
End If
If CreatedFor > 1 Then
strQueSearch = strQueSearch + " and t_Que.Manager = @Manager "
End If
If DateCreated <> "" Then
If DateCreatedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueDate >@QueDate "
ElseIf DateCreatedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueDate <@QueDate "
ElseIf DateCreatedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueDate =@QueDate "
End If
End If
If DateCompleted <> "" Then
If DateCompletedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueDateComplete >@QueDateComplete "
ElseIf DateCompletedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueDateComplete <@QueDateComplete and t_Que.QueDateComplete >'1/1/1900' "
ElseIf DateCompletedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueDateComplete =@QueDateComplete "
End If
End If
If DateStarted <> "" Then
If DateStartedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueStartDate >@QueStartDate "
ElseIf DateStartedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueStartDate <@QueStartDate "
ElseIf DateStartedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueStartDate =@QueStartDate "
End If
End If
If SearchType = 0 Then
'Both
'strQueSearch = strQueSearch + " and t_Que.Mail=0 and t_Que.Mail=1 "
ElseIf SearchType = 1 Then
'Mail
strQueSearch = strQueSearch + " and t_Que.Mail=1 "
ElseIf SearchType = 2 Then
'Phone
strQueSearch = strQueSearch + " and t_Que.Mail=0 "
End If
If Completed = 0 Then
'Both
'strQueSearch = strQueSearch + " and t_Que.Mail=0 and t_Que.Mail=1 "
ElseIf Completed = 1 Then
'Yes
strQueSearch = strQueSearch + " and t_Que.QueCompleted=1 "
ElseIf Completed = 2 Then
'No
strQueSearch = strQueSearch + " and t_Que.QueCompleted=0 "
End If
If Priority > 0 Then
If PriorityMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QuePriority >@QuePriority "
ElseIf PriorityMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QuePriority <@QuePriority "
ElseIf PriorityMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QuePriority =@QuePriority "
End If
End If
If RemainingCalls > 0 Then
If RemainingCallsMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueQuantity >@QueQuantity "
ElseIf RemainingCallsMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueQuantity <@QueQuantity "
ElseIf RemainingCallsMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueQuantity =@QueQuantity "
End If
End If
If TotalCalls > 0 Then
If TotalCallsMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueTotal >@QueTotal "
ElseIf TotalCallsMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueTotal <@QueTotal "
ElseIf TotalCallsMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueTotal =@QueTotal "
End If
End If
If Bonus > 1 Then
strQueSearch = strQueSearch + " and t_Que.BonusID =@BonusID "
End If
If Keyword1 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword1+'%' "
End If
If Keyword2 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword2+'%' "
End If
If Keyword3 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword3+'%' "
End If
If Keyword4 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword4+'%' "
End If
If Keyword5 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword5+'%' "
End If
'makes statement into sqlcommand
C.daQueSearch.SelectCommand.CommandText = strQueSearch
'var declaration
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@BatchID", SqlDbType.VarChar, 12))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Manager", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@RepID", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueDate", SqlDbType.VarChar, 20)) '<--- This is what,when i change to datetime, says it cant convert
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueStartDate", SqlDbType.VarChar, 20))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueDateComplete", SqlDbType.VarChar, 20))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QuePriority", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueQuantity", SqlDbType.BigInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueTotal", SqlDbType.BigInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@BonusID", SqlDbType.SmallInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword1", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword2", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword3", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword4", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword5", SqlDbType.VarChar, 50))
'data entry
C.daQueSearch.SelectCommand.Parameters("@BatchID").Value = BatchID
C.daQueSearch.SelectCommand.Parameters("@Manager").Value = CreatedBy
C.daQueSearch.SelectCommand.Parameters("@RepID").Value = CreatedFor
C.daQueSearch.SelectCommand.Parameters("@QueDate").Value = DateCreated
C.daQueSearch.SelectCommand.Parameters("@QueStartDate").Value = DateStarted
C.daQueSearch.SelectCommand.Parameters("@QueDateComplete").Value = DateCompleted
C.daQueSearch.SelectCommand.Parameters("@QuePriority").Value = Priority
C.daQueSearch.SelectCommand.Parameters("@QueQuantity").Value = RemainingCalls
C.daQueSearch.SelectCommand.Parameters("@QueTotal").Value = TotalCalls
C.daQueSearch.SelectCommand.Parameters("@BonusID").Value = Bonus
C.daQueSearch.SelectCommand.Parameters("@Keyword1").Value = Keyword1
C.daQueSearch.SelectCommand.Parameters("@Keyword2").Value = Keyword2
C.daQueSearch.SelectCommand.Parameters("@Keyword3").Value = Keyword3
C.daQueSearch.SelectCommand.Parameters("@Keyword4").Value = Keyword4
C.daQueSearch.SelectCommand.Parameters("@Keyword5").Value = Keyword5
Try
C.ndConnection.Open()
C.daQueSearch.SelectCommand.ExecuteNonQuery()
Catch ex As Exception
lblMainError1.Text = err("dbDGQSSearch " + ex.Source, ex.Message, CurUsr)
lblMainError1.Visible = True
Finally
C.ndConnection.Close()
End Try
FillQSDG()' this fills the datagrid
End Function
Hi,
Can anyone tell me how to convert date and time to string.
I got one field inside my database which contain data like below:
4/16/2004 10:19:01 AM
if i wan to call out a record which have to refer to the data above
Select *
From table_A
where field_date= ???????
what to fill in the ??????
Thanx
Precisely, here's what I need:When I run getdate(), I get, for example:August 9 2004 5:17 P.M.I want to turn the date portion into:8/9/2004 format and update one column with itI want to turn 5:17 P.M. into:hhmmss and update another column with it.I've been playing around with datepart, with substr, with you name it,and I'm stumped.Any code samples, other help most appreciated.Thanks,Google Jenny*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View Related