I have a table with fields:
Id int
Pay numeric(19,3)
value records:
id pay
1 1.000
2 2.250
3 3.445
4 6.000
I want select of table to form:
id pay
1 1
2 2.25
3 3.445
4 6
if value decimal pay field Greater of zero then
value select= value field
else
delete value decimal and show
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
I have a table with three columns: UniqID, Latitude, and Longitude.
I need to write a query to identify when the latitude has more than 6 decimal places past the decimal. Same with Longitude. Values in these attributes can be a negative number. These fields are FLOAT.
I have a table in SQL 2005 with a field that has a value of type 'money'. When values are added, the field has 4 decimal places. Is there a way that I can make it only have 2 decimal places right away? Thanks!!!
View 1 Replies View RelatedIs there an easy way to send back to my C# program the pascal case of a field type? If you get the parameters or columns for a table or procedure the type is in all lowercase (varchar instead of VarChar). But in C#, it is in an enum (SqlDbType) that has the variables as mixed case so you can't compare them and just pass the type. You need to figure out what the case should be - varchar should be VarChar and bigint should be BigInt.
View 1 Replies View RelatedI have a routine that generates an HTML email and sends it just fine, but one of the columns ends up with 4 decimal places for a column datatype of money. How can I get the script to output only 2 decimal places for the amount column from the select statement?
Here's the script:
declare @tableHTML nvarchar(max) ;
set @tableHTML =
N'<h1>Revenue Report</h1>' +
N'<table border="1">' +
N'<tr><th>Amount</th><th>Index</th><th>CompObj</th><th>Rev Type</th><th>Program</th>'+
CAST ((SELECT td=SUM(dbo.tblAllocations.Amount),'',
[code]....
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
View 2 Replies View RelatedHello!
I would like to cast (convert) data type decimal(24,4) to
decimal(21,4). I could not do this using standard casting function
CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable)
because of the following error: "Arithmetic overflow error converting
numeric to data type numeric." Is that because of possible loss of the
value?
Thanks for giving me any advice,
Ziga
Happy Friday!
A while since I have posted a question, and this one is probably real easy.
I am trying to store numeric values from a php form in MSSQL 2000 database. However, the columns are set to float and if the value is 1.00, when entered into the table it is saved as 1
If I change the column type to money, the query fails, with an error message of conversion of datatype varchar to datatype money statement terminated.
anybody know what I need to do? do I need to do something in my query to specify that this is NOT varchar data?
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
I need to find the ones ending in a decimal. So if you look at the list below, I need a script that will return the value 001. ,002., 004. ..
001
001.
002.
003
004
004.
I am having values as below:
99.87
99.96
8.67
And my output should be as:
99.8
99.9
8.6
How can I do this
how to round the nearest value after round of decimal and return integer.
declare @data decimal(18,2)
set @data = 5.55
-- output
select '5'
set @data = 5.58
-- output
select '6'
Hello, I heve the code below.
double prix =TextBox1.Text;
And I have SQL SERVER table Products in witch I have a column prix ( Decimal(16,4) )
But if I insert prix on my table products on the field prix. prix does not take the correct value.
For example if TextBox1.Text=19,6 , the value inserted on the field prix in the table will be 20.
Why ?
How can we insert the correct value ?
I have decimal(6,2) defined in a column. If I insert 90.6, it will display 90.60 , 0 becomes .00 .
Is there a way or configuration change so the 0's will on the last will not be showing. And
the 0 will display as 0 not .00?
Thanks in advance.
The following line of SQL returns the first screen shot below.
((T0.TotalSales - ISNULL(T1.TotalSales, 0)) - (T0.StockValue - ISNULL(T1.StockValue, 0))) / (T0.StockValue - ISNULL(T1.StockValue, 0)) * 100 AS 'Gross Profit %'
I now want to limit the decimal places to two (2), and one might think that using a CAST operation here is the solution, as follows.
CAST(((T0.TotalSales - ISNULL(T1.TotalSales, 0)) - (T0.StockValue - ISNULL(T1.StockValue, 0))) / (T0.StockValue - ISNULL(T1.StockValue, 0)) * 100 AS decimal(15,2)) AS 'Gross Profit %'
However in actuality I am still seeing too many decimal places, but the extra ones have changed to ZEROS!
Ideally I would like to have no extra trailing zeros. How to achieve this?
I have calculated values such as ;
OP1: 0,8625OP2: 31OP3: 0,965034965034965OP4: 0,8625OP5: 0,85OP6: 0,931506849315068OP7: 31MOV1 : 9,02903225806451MOV2: 8,68387096774194
I have a SQL database table where I defined all data fields decimal(18,2) for these valuesHere is my code ;
Dim conn As SqlConnection = New SqlConnection("Data Source=SERDARSQLEXPRESS;Initial Catalog=Borsa;Integrated Security=True")Dim sql As String = "UPDATE StockParametre SET OPT1 = @opt1, OPT2 = @opt2, OPT3 = @opt3, OPT4 = @opt4, OPT5 = @opt5, OPT6 = @opt6, OPT7 = @opt7, MOVY = @mov1, MOVD = @mov2 WHERE Stock = @TickerKod"Dim cmd As SqlCommand = New SqlCommand(sql, conn)cmd.Parameters.AddWithValue("@opt1", op1)cmd.Parameters.AddWithValue("@opt2", op2)cmd.Parameters.AddWithValue("@opt3", op3)cmd.Parameters.AddWithValue("@opt4", op4)cmd.Parameters.AddWithValue("@opt5", op5)cmd.Parameters.AddWithValue("@opt6", op6)cmd.Parameters.AddWithValue("@opt7", op7)cmd.Parameters.AddWithValue("@mov1", mov1)cmd.Parameters.AddWithValue("@mov2", mov2)cmd.Parameters.AddWithValue("@TickerKod", TickerKod)
conn.Open()cmd.ExecuteNonQuery()conn.Close()
When I run these code I have the fallowing error..
The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 3 ("@opt1"): The supplied value is not a valid instance of data type float. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision..blabla ...I tried
cmd.Parameters.AddWithValue("@opt1", FormatNumber(CDec(op1), 2))
but I have the error
Error converting data type nvarchar to numeric.
Thanks
I am using the statement below to calculate the average scores of the columns. When the result set is returned I would like to have a scale of 2. I am currently returning a scale of 6. What could I do to fix this?
Thanks for you help,
John
SELECT ((CONVERT(decimal(4,2),c2_3) + CONVERT(decimal(4,2),c2_15) +
CONVERT(decimal(4,2),c2_16) + CONVERT(decimal(4,2),c2_17)) / 4 * 100) AS Score_A
FROM dataquestionnaire
WHERE confirmation = '10/1/2001-999-1'
This one cost me a solid half hour yesterday. I'm wondering why onearth the default precision for a decimal type is 18,0. Maybe I'mmistaken. A decimal datatype sort of implies that you'd want somethingafter the decimal!Question is, can I set this database-wide? Like all new decimaldatatypes have a precision of 12,6 or something like that? I haven'tseen anything about this in the googling I have done...
View 3 Replies View RelatedI need to store 256 bit hash (SHA-2 alogrithmn) in one of the table'sprimary key. I would prefer to use numeric data type rather varcharetc.* Decimal datatype range is -10^38 +1 to 10^38 -1. I can split my 256bit hash into two decimal(38, 0) type columns as composite key* I can store the hash as varbinary. I never used it and don't havemuch understanding in terms of query writing complexities and dealingit through ADO (data type etc.)It would be heavy OLTP type of systems with hash based primary keyused in joins for data retrieval as well.Please provide your expert comments on this.RegardsAnil
View 1 Replies View RelatedHi Experts,
I have an urgent needs.
I want to store null for decimal type to sql server. But I do not know how to do that. I get data from user input. If the user did not enter anything in the textbox, then I want to store null to sql server. I list a piece od code below. I got error in the last line fItemObject.ChargeAmount = null;.
if (!String.IsNullOrEmpty(txtDescription.Text)) myObject.LongDesc = txtLongDesc.Text; else myObject.LongDesc = null;
if (!String.IsNullOrEmpty(txtAmount.Text)) myObject.Amount = Convert.ToDecimal(txtChargeAmount.Text); else myObject.ChargeAmount = null;
// Then I submit the myobject to the sql server.
Thank you very much in adavance!
This problem is strictly an SQL problem, and I am about to lose my mind over it. I have a table named Inventory that has a column named PartialQty which is of type DECIMAL(11,4). I have shortened my query for simplicity, but here it is.
DECLARE @pqty1 DECIMAL(11,4)
SELECT @pqty1 = PartialQty FROM Inventory WHERE InventoryID = @invIDPRINT @pqty1 UPDATE Inventory SET PartialQty = 6.5513 WHERE InventoryID = @invID
SELECT @pqty1 = PartialQty FROM Inventory WHERE InventoryID = @invIDPRINT @pqty1
Before this query is ran, the value in PartialQty is 1.2345. If I run this 2 times in a row, this is the output I get:
RUN 1:
1.2345
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
6.0000
RUN 2:
6.0000
(1 row(s) affected)
6.5513
I don't understand 2 things. One is why the first run displays (1 row(s) affected) 4 times even though there is only one record with that InventoryID.
And the other thing I don't understand is why the first time I run it, it loses all of the values after the decimal point.
Please help,
Scott
I have just loaded my db table from an excel file using the import wizard. Prior to the import, I set my data types and in the field that I need a number with 1 decimal place I chose a decimal data type.
Made since to me
However, now my numbers do not have the decimals.
Please help.
I would like to 'drop' some trailing zeros from a decimal value, e.g.: 50.000000, and I am wondering how to go about this?
The value is definitely of decimal type, and in this instance I know that I want to eliminate exactly six (6) zeros.
Hi all,
I'm trying to update a decimal field with a single decimal number (1.8) the problem i'm having, is that it's rounding the number up (2). I would've thought that a decimal datatype would keep the decimal places correct?
This is quite annoying.. I've been searching around the web for an answer.. To no avail (I'm probably asking the wrong question)
Can someone please point me in the right direction?
I am trying to have an Excecute SQL Task return a single row result set executed on SQL Server 2005.
The query in the Execute SQL Task is:
select 735.234, 2454.123
I get a conversion error when trying to assign to SSIS variables of type Double.
I have nothing configured in the "Parameter Mapping" tab.
I have the two SSIS Double variables mapped to the Tesult Name 0 and 1 in the "Result Set" tab
I don't want to use a for loop enumerator since there is a single row returned.
I simply want to assign these two values to SSIS Double variables (double is the closest match)
I can't even hack this by converting the decimals as string and then using DirectCast to convert them to Double.
Thanks for the help
I embedded a SQL query in excel that gets some datetime fields like "TASK_FINISH_DATE"Â .
How can I convert a datetime field to a date field in SQL in a way that excel will recognize it as a date type and not a text type?
I tried:
CONVERT(varchar(8),TASK_FINISH_DATE ,3)
CONVERT(Date,TASK_FINISH_DATE ,3)
CAST(TASK_FINISH_DATE as date)
**all of the above returned text objectes in excel and not date objects.
I am trying to drag data from Informix to Sql Server. When I kick off the package
using an OLE DB Source and a SQL Server Destination, I get DT_DBDATE to DT_DBTIMESTAMP
errors on two fields from Informix which are date data ....no timestamp part
I tried a couple of things:
Created a view of the Informix table where I cast the date fields as datetime year to fraction(5), which failed.
Altered the view to convert the date fields to char(10) with the hopes that SQL Server would implicitly cast them
as datetime but it failed.
What options do I have that will work?
Hello,
I am updating three fields (defined as decimal(18,4) NULL) in
a 1.7 million record table to 0.
This table is also very wide (meaning lot of columns). A simple
query like this -
Update Table1
Set [Decimal Field1] = 0,
[Decimal Field2] = 0,
[Decimal Field3] = 0
is taking forever (1+ hours) to run.
Either I may be doing something stupid here or I am missing
something vital.
Thanks for any help.
I would like to 'drop' some trailing zeros from a decimal value, e.g.: 50.000000, and I am wondering how to go about this?
The value is definitely of decimal type, and in this instance I know that I want to eliminate exactly six (6) zeros.
I have table with data type decimal (18,2) when i try to load more then 2 decimal it is rounding off
Example 34.456 is rounded with 34.46
I want to store 34.45 only with out round in decimal data type how can i achive this
I have value with data type nvarchar:
total
000000854.00
000000042.00
000000065.17
000000000024
000000000.24
How can i convert to decimal and remove 0 infront? but those with 0.xx would not remove the 0 after the dote.
total
854.00
42.00
65.17
24
0.24
Hi..
I have a column in the data base with the type Float,
I want to limit the number of digits after decimal point to 2 when I display the value in ASP.NET but I don't know how!?
the number that appear after calculation llike "93.333333"
I use decimal(2,2) as data type but an error accour and this is the message
"- Unable to modify table. Arithmetic overflow error converting float to data type numeric.The statement has been terminated."
Can you help me..
thanks