I need to write SP where user select SUN to MON check boxes. If user select Class A with sun,mon and wed check boxes then i need to insert data as below
CLASS Days
A sun
A Mon
A wed
There is a table [Formula_Calc] with formula calculations that need to be replaced with relevant values based on another table [Totals]
[Totals]
RowNo|Total
F1|240
F2|160
F3|180
F11|1000
F12|1500
F13|2000
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16.
Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100);
DECLARE @Total NVARCHAR(100);
SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total)
FROM [Totals]
SET @Total='select '+@formula
EXECUTE sp_executesql @Total;
PRINT @Total;
I have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT.
I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId".
What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display.
Sample:
ProjectId - SiteId
1 - 5
1 - 9
1 - 16
1 - 18
1 - 20
1 - 27
1 - 31
ProjectId stays the same, only values for SiteId are being different.
I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10
------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)
Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10
Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5
I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9]
...
[8_4],[8_7]
...
[14_1], [14_2],...[14_10]
etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null
drop table #tempAllergy
select *
into #tempAllergy
from
dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
Is it possible to fill a parameter list with values based on another parameter value?
Here's what I have so far (which hasn't worked)...
I'd like to generate a report listing information for a student. The report viewer would first select a school from the first drop-down menu, and then the second drop-down menu would populate with the list of students at that school.
I have a dataset that calls a sp which returns a list of schools (SchoolID and SchoolName fields from the database table).
I have another dataset that calls a sp (with SchoolID as the parameter) which returns a list of students for that school.
Both datasets return the appropriate data when tested individually, but when I set up the Report Parameters and build the report, these errors come up...
The value expression for the query parameter '@SchoolID' refers to a non-existing report parameter 'SchoolID'.
The report parameter 'Student' has a DefaultValue or a ValidValue that depends on the report parameter "SchoolID". Forward dependencies are not valid.
...Is it possible for the reoprt to generate a list of available parameter values based on the value selected for another parameter?
Any help you can give me would be great!! Thank you
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
I have a requirement to Insert Column 1 and Column 2 based on below condition only. Looking for a Store procedure or query
Condition : Allow Insert when column 1 and Column 2 have same values on 2nd row insert. But should not allow insert when Column 2 value is different.
ALLOW INSERT:
Column1 Column2
A0007 12-Aug
A0007 12-Aug
A0007 12-Aug
DONOT ALLOW INSERT: (COLUMN1 ID should not allow different dates)
Column1 Column2
A0007 23-Mar
A0007 02-Feb
FINAL OUTPUT Should be
Column1Column2
A000712-Aug
A000712-Aug
A000712-Aug
B000220-Jun
B000220-Jun
C000330-Sep
Discard Insert when Column1 ID's comes with Different dates.
I am trying to find out a way to pass an array of pbaseid's to a function.I have a function defind something like this
Fport(@portfoliobaseid, @reportingcurr, @rowno,@todate)
(
returning a table
)
trying to execute it like this but its giving error related to subquery must return single value
select * from Fport((select pbaseid from dbo.pbaseid),'us',1,'12/31/2013')
I think i need to find a way to pass this pbaseid one by one but i dont know how to do this ...
If I have a Select statement like this in my C# code:
Select * From foods Where foodgroup In (@foodgroup)
And I want @foodgroup to have these values ... "meat", "dairy", fruit", what is the correct way to add the parameter?
I tried
meat, dairy, fruit
'meat', 'dairy', 'fruit'
but neither worked. Is this possible?
Hi,
I am using SQL 2005. I have a SELECT query in a stored proc with 3 parameters:
@subaccount,@numDaysCutoff,@numDaysPcts. The proc needs to be modified to return data when subaccount values are any of these:
FRRIJ
FRRIC
FRMM
ROBECO
FRJV
MAIL
FRUKV
FRICE
Currently I use a WHERE condition and am able to get data correctly. However, for a NULL value I should get everything including those not in the above list. Should I use CASE statement instead? How?
@subaccount VARCHAR(8) = NULL
, @numDaysCutoff INT = 1
, @numDaysPcts INT = 1
SELECT Subaccount = ISNULL(h.subaccount, lo.subaccount)
, SecurityID = ISNULL(h.security_id, lo.security_id)
, SecurityName = s.name
, QtyHeldAndPending = ISNULL(h.quantity, 0) +
(CASE WHEN lo.type = 1 THEN lo.resulting_quantity * (-1)
WHEN lo.type = 2 THEN lo.resulting_quantity
ELSE 0 END )
, L.AverageDailyVolume
, XDaysVol = L.AverageDailyVolume * @numDaysPcts
, CutoffVol = L.AverageDailyVolume * @numDaysCutoff
, DaysVolHeld = h.quantity / NULLIF(L.AverageDailyVolume, 0)
, HeldPctNDaysVol = h.quantity / NULLIF((L.AverageDailyVolume * @numDaysPcts), 0) * 100
, TargetedHoldingsUSD = tm.ApprovedPortfolioTarget * iv.value_usd
, CutoffVolUSD = L.AverageDailyVolume * @numDaysCutoff * s.price_usd
, TargetedPctNDaysVol = (tm.ApprovedPortfolioTarget * iv.value_usd) /
NULLIF((L.AverageDailyVolume * @numDaysPcts * s.price_usd), 0) * 100
, DaysVolTargeted = (tm.ApprovedPortfolioTarget * iv.value_usd) /
NULLIF((L.AverageDailyVolume * s.price_usd), 0)
, NDaysCutoff = @numDaysCutoff
, NDaysPcts = @numDaysPcts
FROM subaccount_positions_table h --vGlobalHoldings h
JOIN iv_subaccount_table iv ON iv.subaccount = h.subaccount
FULL OUTER JOIN LiveOrders lo ON lo.subaccount = h.subaccount AND lo.security_id = h.security_id
FULL OUTER JOIN TM_DerivedSecurityTargetDetail tm ON tm.Subaccount = h.subaccount AND tm.SecurityID = h.security_id
LEFT JOIN dbo.security_table s ON s.security_id = COALESCE(h.security_id, lo.security_id)
LEFT JOIN dbo.SecurityLiquidity L ON L.SecurityID = h.security_id AND SourceID = 99
WHERE (h.subaccount = ISNULL(@subaccount, h.subaccount)
OR lo.subaccount = ISNULL(@subaccount, h.subaccount) )
AND status = 1
AND ( h.quantity > (L.AverageDailyVolume * @numDaysCutoff) -- qtyHeld > XDaysVol
OR -- Targeted Vol exceeds cutoff
ISNULL((tm.ApprovedPortfolioTarget * iv.value_usd), 0) >
ISNULL((L.AverageDailyVolume * @numDaysCutoff * s.price_usd), 0) -- Target > XDaysVol
)
ORDER BY ISNULL(h.subaccount, lo.subaccount), ISNULL(h.security_id, lo.security_id)
Thanks in advance!!!
sqlnovice123
I would like to have records in my Absences table split up into multiple records in my query based on a start and end date.
A random record in my Absences table shows (as an example):
resource: 1
startdate: 2014-08-20 09:00:00.000
enddate: 2014-08-23 13:00:00.000
hours: 28 (= 8 + 8 + 8 + 4)
I would like to have 4 lines in my query:
resource date hours
1 2014-08-20 8
1 2014-08-21 8
1 2014-08-22 8
1 2014-08-23 4
Generating the 4 lines is not the issue; I call 3 functions to do that together with cross apply.One function to get all dates between the start and end date (dbo.AllDays returning a table with only a datevalue column); one function to have these dates evaluated against a work schedule (dbo.HRCapacityHours) and one function to get the absence records (dbo.HRAbsenceHours) What I can't get fixed is having the correct hours per line.
What I now get is:
resource date hours
...
1 2014-08-19 NULL
1 2014-08-20 28
1 2014-08-21 28
1 2014-08-22 28
1 2014-08-23 28
1 2014-08-24 NULL
...
... instead of the correct hours per date (8, 8, 8, 4).
A very simplified extract of my code is:
DECLARE @startdate DATETIME
DECLARE @enddate DATETIME
SET @startdate = '2014-01-01'
SET @enddate = '2014-08-31'
SELECTh.res_id AS Resource,
t.datevalue,
(SELECT ROUND([dbo].[HRCapacityHours] (h.res_id, t.datevalue, t.datevalue), 2)) AS Capacity,
(SELECT [dbo].[HRAbsenceHours] (9538, h.res_id, t.datevalue, t.datevalue + 1) AS AbsenceHours
FROMResources h (NOLOCK)
CROSS APPLY (SELECT * FROM [dbo].[AllDays] (@startdate, @enddate)) t
p.s.The 9538 value in the HRAbsenceHours function refers to the absences-workflowID.I can't get this solved.
Hi,
I have created a report using Report designer (Visual Studio, using Data Model as a data source), in the report I had created few datasets (with single filed) to populate the report parameters, lets say I have created a multi valued Parameter CustomerName and assigned field from a dataset,
result are coming correctly and combo box is getting populated but the customers are not in alphabetical order!
I want to sort it and need to specify it in report (please note that I am using Report Model as a data source and I can€™t sort the source table in the data base to get the result sorted)
Please let me know if anybody has done that or forward me if know some link which talks about it.
Thanks in advance.
Regards,
Jayant Jape
Using SQL Server 7 w/SP4.
I need to insert into another table the results of a query. Thought about using a temp table for the first query results, then querying those for the insert, but can't figure out how to pass the search results as a value.
Example:
SELECT ID, NAME FROM tbl2 WHERE ID BETWEEN 1 AND 50
IF @@ROWCOUNT > 0 BEGIN
INSERT INTO tblAudit
(ID, NAME)
VALUES
(@ID, @NAME)
END
Took a look at using SELECT INTO and INSERT INTO, but counldn't get those to work, either.
Thanks for any help.
Hi All,
I have requirement where first I need to show only one report
parameter. Based on user selection I need to prompt or show the user
another report parameter.
Say suppose I have 3 parameters. User selects first value in first
parameter I should not show the other 2 parameters. If user selects
second value in first parameter I should show second parameter and
hide third parameter. There is no relationship between these 2
parameters except user selection. Similarly if user third value in
first parameter then I should show third parameter and hide second
parameter.
Is this possible? I can not see any Visible property for report
parameters.
If yes, how to achieve this functionality?
Appreciate your help.
Regards,
Raghu
Hi i am trying to create an insert statement that will insert rows into a table based on the information in the table already.
the table looks like this
Groupid field1 field2
-1 100 200
-1 100 300
-1 300 500
-1 300 600
-1 400 100
the insert looks like this
INSERT Into table1(groupid,field1,field2)
select -1,@passedvalue,field2
from table1
where field1 = @passedvalue1
assume @passedvalue = 700, @passwedvalue1 = 100
Now this is fine however i cannot have a duplicate key (key is comibantion of all 3 fields) thus the first time this runs it works however if it runs again it fails - how can i change the where clause to ignore rows that already exist?
eg if @passedvalue = 300 and passedvalue1 = 500
in my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').
i tried in my join query
these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')
its taking so much of time how t o solve ?
Please be easy on me...I haven't touched SQL for a year. Why given;
Code Snippet
USE [Patients]
GO
/****** Object: Table [dbo].[Patients] Script Date: 08/31/2007 22:09:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Patients](
[PID] [int] IDENTITY(1,1) NOT NULL,
[ID] [varchar](50) NULL,
[FirstName] [nvarchar](50) NULL,
[LastName] [nvarchar](50) NULL,
[DOB] [datetime] NULL,
CONSTRAINT [PK_Patients] PRIMARY KEY CLUSTERED
(
[PID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
do I get
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near ','.
for the following;
Code Snippet
INSERT INTO Patients
(ID, FirstName,LastName,DOB) VALUES
( '1234-12', 'Joe','Smith','3/1/1960'),
( '5432-30','Bob','Jones','3/1/1960');
Thank you,
hazz
I have two tables  A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.Â
View 5 Replies View RelatedI have some 5 parameters which I've specified as multi-valued and my report uses a stored procedure. When I select all values in my dropdown (parameters) within my reports nothing shows up. How can I pass multiple values of a parameter into my stored procedure such that it works?
View 4 Replies View RelatedHello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
I have 3 tables: CUSTOMER, SALES_HEADER, SALES_DETAIL and there are no relationships / keys between these tables.
I want to INSERT into SALES_HEADER from CUSTOMER & SALES_DETAIL. Here is the query I used.
insert into sales_header (SALES_ID, CUST_ID, SALES_AMOUNT)
select SALES_DETAIL.sales_id, SUM(SALES_DETAIL.prod_price) as sales_amount, CUSTOMER.CUST_ID
from SALES_DETAIL, CUSTOMER
where SALES_HEADER.sales_id = CUSTOMER.cust_id
group by sales_detail.SALES_ID, CUSTOMER.cust_id;
It shows parsed correctly, but giving error: The multi-part identifier "SALES_HEADER.CUST_ID" could not be bound. How to insert from multiple tables when there are no primary / foreign keys & relationships.
Can we Pass table valued parameters and normal params like integer,varchar etc..to a single stored procedure?
View 1 Replies View RelatedHi,
I have a parameter "country" that currently has something like 50 labels (each with a different value) for different countries. I want to be able to design this so that I can select US, Canada and World. This requires me to put multiple values under the "World" label.
Is this doable in reporting services?
Thanks in advance,
Steven
I need to somehow set up a third parameter which allows me to control the tag quantity type either by ALL - % , IS NULL, or IS NOT NULL.
I tried TAG_QUANTITY LIKE :Tags but this would only work if I had the % option select and not the IS NULL or IS NOT NULL
Any thoughts on how to format the select statement?
SELECT ORGANIZATION_ID, TAG_ID, PHYSICAL_INVENTORY_ID, TAG_NUMBER, CREATION_DATE, VOID_FLAG, TAG_QUANTITY, TAG_UOM, SUBINVENTORY,
LOCATOR_ID, COUNTED_BY_EMPLOYEE_ID
FROM INV.MTL_PHYSICAL_INVENTORY_TAGS
WHERE (ORGANIZATION_ID = ite) AND (PHYSICAL_INVENTORY_ID = :InventoryID) AND (VOID_FLAG = 2) AND TAG_QUANTITY IS NULL
ORDER BY TAG_NUMBER
I am trying to create a query that outputs the following data from multiple tables. Here is an example of the raw data right now
Date | MachineNumber | TestName
---------------------------------------
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 620 | Test#1
Here is the desired counted output, I would like to pull distinct Date, MachineNumber, TestName and then count how many times they occur in the raw data form.I do need to perform a case on the date because right now its in a datetime format and I only need the date.
Date | MachineNumber | TestName | TestOccuranceCount
-----------------------------------------------------------------
1/1/2015 | 500 | Something | 4
1/1/2015 | 510 | NewTest | 3
1/1/2015 | 620 | Test#555 | 1
I am pulling three columns with the same names from 8 different tables. What I need to display the date, machine & test name and count how many times a test was run on a machine for that date. I have a feeling this can be handled by SSAS but haven't built an analysis cube yet because I am unfamiliar with how they work. I was wondering if this is possible in a simple query. I tried to set something up in a #Temp table. Problem is the query takes forever to run because I am dealing with 1.7 Million rows. Doing an insert into #temp select columnA, columnB, columnC from 8 different tables takes a bit.
Can someone give me a clue on this. I'm trying to insert values based off of values in another table.
I'm comparing wether two id's (non keys in the db) are the same in two fields (that is the where statement. Based on that I'm inserting into the Results table in the PledgeLastYr collumn a 'Y' (thats what I want to do -- to indicate that they have pledged over the last year).
Two questions
1. As this is set up right now I'm getting NULL values inserted into the PledgeLastYr collumn. I'm sure this is a stupid syntax problem that i'm overlooking but if someone can give me a hint that would be great.
2. How would I go about writing an If / Else statement in T-SQL so that I can have the Insert statement for both the Yes they have pledged and No they have not pledged all in one stored proc. I'm not to familar with the syntax of writing conditional statements within T-SQL as of yet, and if someone can give me some hints on how to do that it would be greatly appriciated.
Thanks in advance, bellow is the code that I have so far:
RB
Select Results.custID, Results.PledgeLastYr
From Results, PledgeInLastYear
Where Results.custID = PledgeInLastYear.constIDPledgeInLastYear
Insert Into Results(PledgeLastYr)
Values ('Y')
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
how can I update Table 1 to get desired results?
Can we insert into multiple table using merge statement?I'm using SQL Server 2008 R2 and below is my MERGE query...
-> I'm checking if the record exist in Contact table or not. If it exist then I will insert into employee table else I will insert into contact table then employee table.
WITH Cont as
( Select ContactID from Contact where ContactID=@ContactID)
MERGE Employee as NewEmp
Using Cont as con
[code]...
I reviewed many threads and looked through many pages in my book, I cannot find my answer.
I have a report in need of carrying multiple values per parameter label. Here is the report parameter and how it is used;
Our IS system considers A-Active, L-On Leave, P-Paid Leave to be "Active"
Our IS system considers T-Terminated, D-Deceased to be "Termed"
Instead of having to have the user click upon three options (A, L, P), I would like to group these and have the Label appear as "Active", while the two options for "Termed" (D, T), would appear as the second parameter option.
Does anyone know how I would get this correctly setup in the Report Parameters... module?
I have tried
Label|Value
Active|A,L,P
Termed|D,T
And
Label|Value
Active|(A,L,P)
Termed|(D,T)
Thank you,
Mark
I am trying to select some values as default for a parameter, I add my data set,add my parameter then I  select the values in the default pane, when I run the report I get :
'the default value expression for the query parameter contains an error[BC30451] name is not declared.
When I look at the expression of the default parameter (in the report data pane under the specify values) it appears like
=new Object() {[Sty].[ST].&[1], [Sty].[ST]..&[15]}
with a red scrible under the ()Â
Hi,
I am using RS2005. i have a requirement in which i need to pass more than 1 value to a parameter. this parameter is used in a dataset for filtering.
Eg: if i have a parameter as @years, i want to assign values 2005, 2006 to it and use it in the dataset to filter like select.... where year in (@years).
How can i achieve this?
Thanks
Vivek S