T-SQL (SS2K8) :: Inserting FK Information Into Temp Table
Jan 7, 2015
I need to insert FK information into a temp table using database name and table name as a parameter.
I've been trying different ways, even with global temp table, but still doesn't work. Below is the code showing what I am trying to achieve. I want to avoid global temp table if possible.
IF OBJECT_ID('tempdb..##FKs') IS NOT NULL DROP TABLE ##FKs
CREATE TABLE ##FKs (
[ForeginKeyName] [nvarchar](128) NULL,
[TableSchema] [sysname] NULL,
[TableName] [nvarchar](128) NULL,
[RelatedTableSchema] [sysname] NULL,
[Code] .....
View 9 Replies
ADVERTISEMENT
Apr 9, 2014
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
View 2 Replies
View Related
Aug 12, 2015
I am working on moving information from one of our databases into a newer one the company has recently setup. I am working in MS SQL Server 2012 and am trying to Inset/Update (depending on the information) a part table. I will list the two tables I am working on as Old (where I am getting the information) and New (where it is to be inserted into).
The old table has about 250 columns of information, most of which is not needed. The needed information is as follows: Name, ID, Component1, Component1_PIN,Component1_SN, Component1_Description, Component2, Component2_PIN, Component2_SN. The component section repeats up to Component12.
The new table has columns setup as such: Name, ID, Case, CasePIN, CaseSN, Case_Desc, Processor, ProcessorPIN, ProcessorSN, Processor_Description, Memory, MemoryPIN, MemorySN, Memory_Description, etc.
The issue I am having is that in the old table each component can have Case, Processor, Memory, etc in that one column. I need to insert Case, Memory, etc into the correct column in the new table while keeping intact the rest of the information.Â
Example:
Old Table
Name | ID | Component1 | Component1_PIN | Component1_SN | Component1_Description | Component2 | Component2_PIN | Component2_SN | Component2_Description
Nest8 | 5682 | Case | 901834 | 237848117 | Black, rectangular | Memory | 9081234 | 5398798134 | NULL
Nest8 | 5978 | Case | 901463 | 237848138 | Black, rectangular | Processor | 2394875 | 2903857809 | Bad
Reds3 | 5683 | Memory | 2405 | 89752342 | Crucial | HardDrive | 92387595 | 457982234 | NULL
Bass | 5644 | HardDrive | 79872346 | 5321675789 | NULL | Case | 10984528 | 3498769872 | NULL
I am not sure how to loop through and grab each part and place it in the column it needs to be while keeping it with the ID.Â
View 7 Replies
View Related
Mar 10, 2006
Hi,
I have a proc, if i run that proc from query analyzer it completes in 12 sec.
I want those results to be inserted into temp table. When i try to insert the results from Stored proc to temp table it is taking 5 min.
What could be the cause of the problem?
Any help would be greately appreciated.
sskris
View 4 Replies
View Related
Aug 12, 2015
I am working on moving information from one of our databases into a newer one the company has recently setup. I am working in MS SQL Server 2012 and am trying to Inset/Update (depending on the information) a part table. I will list the two tables I am working on as Old (where I am getting the information) and New (where it is to be inserted into).
The old table has about 250 columns of information, most of which is not needed. The needed information is as follows: Name, ID, Component1, Component1_PIN, Component1_SN, Component1_Description, Component2, Component2_PIN, Component2_SN. The component section repeats up to Component12.
The new table has columns setup as such: Name, ID, Case, CasePIN, CaseSN, Case_Desc, Processor, ProcessorPIN, ProcessorSN, Processor_Description, Memory, MemoryPIN, MemorySN, Memory_Description, etc.
The issue I am having is that in the old table each component can have Case, Processor, Memory, etc in that one column. I need to insert Case, Memory, etc into the correct column in the new table while keeping intact the rest of the information.
Example:
Old Table
Name | ID | Component1 | Component1_PIN | Component1_SN | Component1_Description | Component2 | Component2_PIN | Component2_SN | Component2_Description
Nest8 | 5682 | Case | 901834 | 237848117 | Black, rectangular | Memory | 9081234 | 5398798134 | NULL
Nest8 | 5978 | Case | 901463 | 237848138 | Black, rectangular | Processor | 2394875 | 2903857809 | Bad
Reds3 | 5683 | Memory | 2405 | 89752342 | Crucial | HardDrive | 92387595 | 457982234 | NULL
Bass | 5644 | HardDrive | 79872346 | 5321675789 | NULL | Case | 10984528 | 3498769872 | NULL
I am not sure how to loop through and grab each part and place it in the column it needs to be while keeping it with the ID.
View 4 Replies
View Related
Mar 3, 2004
I have a temp table in my stored procedure when I try to insert into the temp table thro dynamic sql, it says that table has to be defined. What could be the problem. i have added the code below
CREATE PROCEDURE USP_RULE
AS
declare @TABLE1 table
(
SlNo int identity(1,1), EqNum varchar(25),Pointnum varchar(25)
)
declare @EqNum varchar(25),@Pointnum varchar(25)
DECLARE @STRDBNAME VARCHAR(50)
SET @STRDBNAME = 'DB1'
EXEC('insert into '+@TABLE1+' select EQNUM,POINTNUM from '+@STRDBNAME+'..TABLE2')
GO
View 4 Replies
View Related
Mar 3, 2008
I'm trying to insert any null values into a temp table. I'm storing the ixo_rlt_code as OldRole, and 'Other' as NewRole. I need both the ixo_rlt_code as OldRole and 'Other' as NewRole in the temp talbe in order to run an update I'm writing.
I know a case statement isn't necessary here, but this section is only one small part of a larger script, so I just used it to be consistent, and it will be easier to make any future changes this way. Below is my code and the error message I'm getting...
select
ixo_key,
ixo_title as Title,
ixo_rlt_code as OldRole,
CASEWHEN ixo_title is null
or ixo_title = ''
or ixo_title = ' '
or ixo_title = ' ' THEN 'Other'
END as NewRole
from
co_customer (nolock)
join co_individual_x_organization (nolock) on ixo_key = cst_ixo_key --and ixo_delete_flag = 0
where
cst_delete_flag = 0
and cst_type = 'Individual'
and ixo_rlt_code is null
This is the Error Message I get:
Server: Msg 515, Level 16, State 2, Line 1095
Cannot insert the value NULL into column 'NewRole', table 'tempdb.dbo.#temp_______________________________________________________________________________________________________________00000001698C'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Thanks ahead of time for any help/suggestions
View 3 Replies
View Related
Aug 14, 2015
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
View 5 Replies
View Related
Sep 27, 2001
I have an ASP page that opens a recordset on a stored procedure. I've had it
in production for over a year, and it usually works fine - subsecond
response. However, in the past couple weeks, the recordset open command has
intermittently started to return timeout errors. It's very strange: when the
timeout occurs, it can be dependably reproduced by opening the ASP page with
the same parameter that produced the initial timeout. However, if you pass a
different parameter to the procedure, it runs fine! It only times out when
using the specific parameter that produced the initial timeout.
Even stranger: If, when attempting to debug it, I use QA to run the sp with
the "defective" parameter, the sp invariably runs fine! And subsequent runs
of the ASP page start working as well!
I have repeated this process many times in the past couple weeks: receive a
report of the timeout error; open the asp page with the parameter that
produced the timeout to verify; repeat; open the asp page with a different
parameter - works fine; repeat with the initial parameter - timeout; Open QA
and run the sp - no problem; refresh the asp page - no more symptom.
The connection to the SQL Server (7.0) uses a specific SQL login for all
communications with the server. So all asp pages are logged in under the
same name. I thought this might be a connection pooliing issue, so this
morning, when the problem occurred, I logged into QA as the special name,
but again, there was no problem running the sp from QA.
So - I've run SQL Profiler to track what's going on when the problem occurs
and I've discovered the last statement to successfully run. Here is the sp:
/*
* File Name: np_GetAvailablePreviews.sql
Returns a list of "reports" available to be previewed, defined as:
date/shift combination with "P" mode and "C" status (if there
are Shift records, there must be an All record)
If none exist, check for the existence of accepted (mode = "A")
Shift records without a corresponding All record - if so, return
an All item for that date
Concatenate <OPTION> tags around each item
*/
CREATE PROCEDURE np_GetAvailablePreviews
(
@DivisionNumber smallint)
AS
BEGIN
set nocount on
declare @count int,
@datefrom datetime
select @datefrom = dateadd(day,-900,getdate())
CREATE TABLE #PreviewReports
(
ProductionDate datetime NULL,
Shift char(3) NULL
)
Insert #PreviewReports
SELECT DISTINCT ProductionDate,Shift
FROM dbo.LineItems
WHERE DivisionNumber = @DivisionNumber
AND Mode = 'P' AND Status = 'C'
AND productiondate >= @datefrom
-->>>The above command completes successfully according to Profiler
Insert #PreviewReports
SELECT distinct t1.ProductionDate, 'All'
FROM
(SELECT distinct ProductionDate, Shift, Mode, Status
FROM LineItems
WHERE DivisionNumber = @DivisionNumber
AND Shift<>'All' AND Mode='A' AND Status='C'
AND productiondate >= @datefrom AND timeperiod IN
('Day','Shift')
) t1
LEFT JOIN
(SELECT distinct ProductionDate, Shift, Mode, Status
FROM LineItems
WHERE DivisionNumber = @DivisionNumber
AND Shift='All' AND Mode='A' AND Status='C'
AND productiondate >= @datefrom AND timeperiod IN
('Day','Shift')
) t2
ON t1.ProductionDate = t2.ProductionDate
WHERE t2.ProductionDate Is Null
AND NOT EXISTS (Select * from #PreviewReports
where productiondate = t1.ProductionDate
and Shift = 'All')
-->>>This one (the one before this comment) starts, but does
not -->>>complete
set @count=(Select Count(*) From #PreviewReports)
-->>This one never begins - the ADO command times out
<snipped>
I did not provide a repro script because the problem is so intermittent that
I doubted it would do anyone any good.
However if someone feels they want to try to reproduce this, I will attempt
to create a repro script for them.
I suspect there is an issue with the temp table, but it's such a moving
target that I haven't been able to pin it down.
Does anyone have any suggestions?
TIA,
Bob Barrows
View 1 Replies
View Related
Sep 17, 2013
I am try to insert the results from the query into new temp table but keep geeting an error for Incorrect syntax near ')'.
select * into tempCosting
from
(
select top 10* from itemCode itm
where itm.type= 1
)
View 3 Replies
View Related
Apr 21, 2015
I want to insert data (month&year) from 2014 till now - into temp table using 2 while loop.
drop table #loop
create table #loop
(
seq int identity(1,1),
[month] smallint,
[Year] smallint
For some reason I cant not get 2015 data .
View 4 Replies
View Related
Jul 20, 2005
HiI need some help on achieving the following:I wrote a querie which collects Data out of three Tables, the Resultlooks like this:SET NOCOUNT ONDECLARE @ROWINTDECLARE @CURPTNO CURSORSET @CURPTNO = CURSORFORSELECT * FROM TEMPOPEN @CURPTNOFETCH NEXT FROM @CURPTNOINTO @ROWWHILE (@@FETCH_STATUS = 0)BEGINSELECT ONE.CYNO, ONE.ROLE, ONE.ROL_BEZ, ONE.PTNO, ONE.NOCY, TWO.TEXTAS NOCY_TEXTFROM(SELECT CY.CYNO,RE.CYNO AS RECYNO, RTRIM(RE.ROLE) AS ROLE, RTRIM(V_ROLE.TEXT) ASROL_BEZ,RE.PTNO AS PTNO, RTRIM(RE.NAME) AS SACHBEARBEITER, RE.NOCYFROM CYRIGHT OUTER JOINRE ON RE.CYNO = CY.CYNOINNER JOINV_ROLE ON RE.ROLE = V_ROLE.CODEWHERE (RE.PTNO IN(SELECT PT.PTNOFROM PTWHERE PT.PTNO IN(@ROW)AND V_ROLE.LANGUAGE = PT.CLANG))) AS ONELEFT JOIN(SELECT V_NOCY.CODE, V_NOCY.TEXTFROM V_NOCYINNER JOINPT ON PT.CLANG = V_NOCY.LANGUAGEAND PT.PTNO IN (SELECT PT.PTNOFROM PTWHERE PT.PTNO IN(@ROW))) AS TWOON ONE.NOCY = TWO.CODEFETCH NEXT FROM @CURPTNOINTO @ROWENDCLOSE @CURPTNODEALLOCATE @CURPTNOThe Result looks like this:RS1:6313,1300,Architekt,99737505,NULL,NULL2392762,100,Bauherr,99737505,NULL,NULLRS2:2693265,100,Bauherr,99756900,NULL,NULLNULL,1,Planer,99756900,2,Bauherr macht Pläne selberRS3:2691919,100,Bauherr,99755058,NULL,NULL2691962,6000,Kontakt,99755058,NULL,NULLMy Problem is, that I need to have all the Resultsets in one Table atthe end.So my further undertaking was to create a Temp Table with theexpectation to receive all the resultsets in one Step.The TSQL for this looks like that:SET NOCOUNT ONCREATE TABLE #CYRE_TEMP(CYNOINT NULL,ROLEINT NULL,ROL_BEZVARCHAR (60) NULL,PTNOINT NULL ,NOCYINT NULL,TEXTVARCHAR (60) NULL)GODECLARE @CYNOINT,@ROLEINT,@ROL_BEZVARCHAR (60),@PTNOINT,@NOCYINT,@TEXTVARCHAR (60),@ROWINT,@CURPTNOCURSORSET @CURPTNO = CURSOR FORSELECT PTNO FROM TEMPOPEN @CURPTNOFETCH NEXT FROM @CURPTNOINTO @ROWWHILE (@@FETCH_STATUS = 0)BEGININSERT INTO #CYRE_TEMP (CYNO, ROLE, ROL_BEZ, PTNO, NOCY, TEXT)VALUES(@CYNO,@ROLE ,@ROL_BEZ ,@PTNO ,@NOCY ,@TEXT)SELECT @CYNO = ONE.CYNO,@ROLE = ONE.ROLE,@ROL_BEZ = ONE.ROL_BEZ,@PTNO = ONE.PTNO,@NOCY = ONE.NOCY,@TEXT = TWO.TEXTFROM(SELECT CY.CYNO, RTRIM(RE.ROLE) AS ROLE, RTRIM(V_ROLE.TEXT) ASROL_BEZ,RE.PTNO AS PTNO, RTRIM(RE.NAME) AS SACHBEARBEITER, RE.NOCYFROM CYRIGHT OUTER JOINRE ON RE.CYNO = CY.CYNOINNER JOINV_ROLE ON RE.ROLE = V_ROLE.CODEWHERE (RE.PTNO IN(SELECT PT.PTNOFROM PTWHERE PT.PTNO =@ROWAND V_ROLE.LANGUAGE = PT.CLANG))) AS ONELEFT JOIN(SELECT V_NOCY.CODE, V_NOCY.TEXTFROM V_NOCYINNER JOINPT ON PT.CLANG = V_NOCY.LANGUAGEAND PT.PTNO IN (SELECT PT.PTNOFROM PTWHERE PT.PTNO =@ROW)) AS TWOON ONE.NOCY = TWO.CODEFETCH NEXT FROM @CURPTNOINTO @ROWENDCLOSE @CURPTNODEALLOCATE @CURPTNOSELECT * FROM #CYRE_TEMPDROP TABLE #CYRE_TEMPGOAnd the Output looks like this now:Q1:NULL,NULL,NULL,NULL,NULL,NULL2392762,100,Bauherr,99737505,NULL,NULLNULL,1,Planer,99756900,2,Bauherr macht Pläne selberCan someone help me getting all the 6 Rows into one Table as Output?I appreciate any available Help on this..Ssscha
View 1 Replies
View Related
Nov 2, 2010
I am trying to create a temp table with a non-clustered index.
Originally I tried to create the index after I created the table.
This seemed to work fine, so I added my stored procedure to our Production environment.
However, when two users called the stored procedure at once I got the following error:
There is already an object named 'IX_tmpTableName' in the database. Could not create constraint. See previous errors.
I then found that SQL Server does generate unique names for the temp table but not all the objects associated with the temp table if they are explicitly named.
This is easy enough to solve for a PRIMAY KEY or UNIQUE constraint because the do not have to be named.
Is there a way to create an non-clustered index on a temp table without naming it?
View 9 Replies
View Related
Nov 12, 2014
In a Stored Proc I am creating the following temp table and index:
CREATE TABLE [dbo].[#ShipTo](
[Ship_to_Num] [int] NOT NULL,
[Country_key] [nvarchar](3) NULL,
CONSTRAINT [PK_ShipTo] PRIMARY KEY CLUSTERED
(
[ship_to_Num] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
The stored Proc runs fine from "exec", but when you batch into a Job it gives the error that "PK_ShipTo" already exists! I even put in a drop table on #ShipTo, but the same effect.
View 9 Replies
View Related
Dec 16, 2007
Below is a simplified table & dataset to illustrate a problem I'm experiencing with a more complex one.
Code Block
create table #test(
recno smallint PRIMARY KEY,
value decimal (18,2))
insert into #test values (1, 3.57)
insert into #test values (2, 5.32)
insert into #test values (3,6.29)
insert into #test values (4, 9.25)
insert into #test values (5, 0.84)
Method 1: I tried inserting rows from #test into a temp table (#table) as follows
Code Block
declare @n as nvarchar(3)
set @n = 1
while @n <= (select count(recno) from #test)
begin
exec ('
insert into ##table
select *,
originalrecno = (select recno from #test where recno = '+@n+')
from #test'
)
set @n = @n + 1
end
However, this yields an error message:
Code Block
Server: Msg 208, Level 16, State 1, Line 2
Invalid object name '##table'.
Note - you can comment out the insert into ##table line above to view the results that I'm trying to put into ##table.
Method 2: next I tried explicitly creating ##table & rerunning the loop containing the insert
Code Block
create table ##table (
recno smallint,
value decimal (18,2),
originalrecno smallint)
declare @n as nvarchar(3)
set @n = 1
while @n <= (select count(recno) from #test)
begin
exec ('
insert into ##table
select *,
originalrecno = (select recno from #test where recno = '+@n+')
from #test'
)
set @n = @n + 1
end
This worked - it inserted the data from the select statements in the loop into ##table.
Question - why won't method 1 work?
View 6 Replies
View Related
Jun 6, 2014
I'm working on building a report and asked a developer which table some data comes from in an application. His answer was the name of a 3500 line stored procedure that returns 2 result sets. I could accomplish what I'm trying to do using the second result set, but I'm not sure how to put that into a temporary table so that I could use it.
Here's my plan according to the Kübler-Ross software development lifecycle:
Denial - Ask the developer to make sure this is correct (done)
Despair - Look hopelessly for a solution (where I am now)
Anger - Chastise developer
Bargaining - See if I can get him to at least swap the order that the resultsets are returned
Acceptance - Tell the users that this can't be done at present.
View 3 Replies
View Related
Jun 4, 2015
I have a cte:
With cte as
(
Select distinct Incident_ID,
ACTUAL_SEVERITY ,
Policy
From
table)
There are 3 ACTUAL_SEVERITY value: 1-High, 2-Medium and 3-Low
I need the final result be like:
Policy High Medium/Low
How do I write the script with out using temp table or cursor?
View 6 Replies
View Related
Feb 18, 2008
I writing a unit test which has one stored proc calling data from another stored proc. Each time I run dbo.ut_wbTestxxxxReturns_EntityTest I get a severe uncatchable error...most common cause is a trigger error. I have checked and rechecked the columns in both of the temp tables created. Any ideas as to why the error is occurring?
--Table being called.
ALTER PROCEDURE dbo.wbGetxxxxxUserReturns
@nxxxxtyId smallint,
@sxxxxxxxxUser varchar(32),
@sxxxxName varchar(32)
AS
SET NOCOUNT ON
CREATE TABLE #Scorecard_Returns
(
NAME_COL varchar(64),
ACCT_ID int,
ACCT_NUMBER varchar(10),
ENTITY_ID smallint,
NAME varchar(100),
ID int,
NUM_ACCOUNT int,
A_OFFICER varchar(30),
I_OFFICER varchar(30),
B_CODE varchar(30),
I_OBJ varchar(03),
LAST_MONTH real,
LAST_3MONTHS real,
IS int
)
ALTER PROCEDURE dbo.ut_wbTestxxxxReturns_EntityTest
AS
SET NOCOUNT ON
CREATE TABLE #Scorecard_Returns
(
NAME_COL varchar(64),
ACCT_ID int,
ACCT_NUMBER varchar(10),
ENTITY_ID smallint,
NAME varchar(100),
ID int,
NUM_ACCOUNT int,
A_OFFICER varchar(30),
I_OFFICER varchar(30),
B_CODE varchar(30),
I_OBJ varchar(03),
LAST_MONTH real,
LAST_3MONTHS real,
IS int
)
INSERT #Scorecard_Returns(
NAME_COL ,
ACCT_ID
ACCT_NUMBER ,
ENTITY_ID,
NAME,
ID,
NUM_ACCOUNT,
A_OFFICER,
I_OFFICER,
B_CODE,
I_OBJ ,
LAST_MONTH
LAST_3MONTHS,
IS
)
EXEC ISI_WEB_DATA.dbo.wbGetxxxxxcardUserReturns
@nId = 1,
@sSUser = 'SELECTED USER',
@sUName = 'VALID USER'
View 4 Replies
View Related
Aug 20, 2013
Is it possible to return the results of a stored procedure into either a CTE or temp table?
In other words, is it possible to do this:
with someCTE as (
exec someStoredProc
)
or this:
exec someStoredProc into #tempTable
???
View 9 Replies
View Related
May 8, 2014
I would like to know if the following sql can be used to obtain specific columns from calling a stored procedure with parameters:
/* Create TempTable */
CREATE TABLE #tempTable (MyDate SMALLDATETIME, IntValue INT)
GO
/* Run SP and Insert Value in TempTable */
INSERT INTO #tempTable (MyDate, IntValue)
EXEC TestSP @parm1, @parm2
If the above does not work or there is a better way to accomplish this goal, how to change the sql?
View 1 Replies
View Related
Jul 14, 2014
We are in the conversion process of making the database ints.This is a change from a guid PK to an integer based PK that uses an int Identity. The program still uses the guid, and we are trying to map that guid to the databases int.We insert using TVPs passed from code. Since the identity is being set upon insert I have three things to accomplish:
1) Insert all the data into the dbo table
2) Update the parent Id in the table
3) Pass the SetsId guid, Sets_Id int, ParentSets_Id int back to the program
This is a high transaction table that will have a lot of records (millions).
--Sample table creation. There is a FK between Sets_Id to ParentSets_Id, Clustered PK on the Sets_Id
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[JSets]') AND type in (N'U'))
BEGIN
CREATE TABLE [dbo].[JSets](
[SetsID] [uniqueidentifier] NOT NULL,
[Sets_Id] bigint Identity (1,1) NOT NULL,
[code]...
View 0 Replies
View Related
Nov 22, 2006
Im trying to add a new rcord to my db on a button click usign the following code
'data adapter
Dim dAdapt1 As New SqlClient.SqlDataAdapter
'create a command object
Dim objCommand As New SqlClient.SqlCommand
'command builder
Dim builderT As SqlClient.SqlCommandBuilder
'connection string
Dim cnStr As String = "Data Source=ELEARN-FRM-BETA;Initial Catalog=StudentPlayGround;Integrated Security=True"
'dataset
Dim dsT As DataSet
Private Sub connect()
'connection
objCommand.Connection = New SqlClient.SqlConnection(cnStr)
'associating the builder with the data adapter
builderT = New SqlClient.SqlCommandBuilder(dAdapt1)
'opening the connection
objCommand.Connection.Open()
'query string
Dim query As String = "SELECT * from StudentPlayground..Employees"
'setting the select command
dAdapt1.SelectCommand = New SqlClient.SqlCommand(query, objCommand.Connection)
'dataset
dsT = New DataSet("Trainee Listings")
dAdapt1.Fill(dsT, "Employees")
End Sub
Private Sub BindData()
connect()
DataBind()
End Sub
Protected Sub submitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submitButton.Click
Dim empID As Integer = CType(FindControl("TextBox8"), TextBox).Text
BindData()
Dim firstName As String = CType(FindControl("TextBox1"), TextBox).Text
BindData()
Dim lastName As String = CType(FindControl("TextBox2"), TextBox).Text
BindData()
Dim location As String = CType(FindControl("TextBox3"), TextBox).Text
BindData()
Dim termDate As Date = CType(FindControl("TextBox4"), TextBox).Text
BindData()
Dim hireDate As Date = CType(FindControl("TextBox7"), TextBox).Text
BindData()
Dim dept As String = CType(FindControl("TextBox5"), TextBox).Text
BindData()
Dim super As String = CType(FindControl("TextBox6"), TextBox).Text
BindData()
Dim newRow As DataRow = dsT.Tables("Employees").NewRow
newRow.BeginEdit()
newRow.Item(0) = empID
newRow.Item(1) = firstName
newRow.Item(2) = lastName
newRow.Item(3) = location
newRow.Item(4) = hireDate
newRow.Item(5) = termDate
newRow.Item(6) = dept
newRow.Item(7) = super
newRow.EndEdit()
'do the update
Dim insertStr As String = "INSERT INTO Employees" + _
"(EmployeeID,FirstName,LatName,Location,HireDate,TerminationDate,Supervisor)" + _
"VALUES (empID,firstName,lastName,location,hireDate,termDate,dept,super)"
Dim insertCmd As SqlClient.SqlCommand = New SqlClient.SqlCommand(insertStr, objCommand.Connection)
dAdapt1.InsertCommand() = insertCmd
dAdapt1.Update(dsT, "Employees")
'Dim insertCmd As new SqlClient.SqlCommand = (builderT.GetInsertCommand()).ToString())
'dAdapt1.InsertCommand = New SqlClient.SqlCommand(insertCmd.ToString(), objCommand.Connection)
BindData()
objCommand.Connection.Close()
objCommand.Connection.Dispose()
End Sub
im not sure wats going wrong because the record is not being added. Please help!!
View 4 Replies
View Related
Dec 16, 2005
Hello,
I'm building an ecommerce website which requires customers to create an account before they go ahead with a purchase. I have a createaccount.aspx page in Visual Web Developer 2005 with text boxes where users can enter their details (email, password, name and address). I'm trying to insert the information which users type into the text boxes into an SQL database table called Customers.
I've dragged and dropped an SQL data source onto my page and have set it to operate on my AddCustomer stored procedure. I've confirgured my data source such that the parameter for each field in the database is set to the appropriate control on the webpage (for example the Email parameter source is "textboxEmail").
I've also placed a button onto my page so that the button click event can act as the trigger for sending the information in the text boxes to the database. I wasn't totally sure how to write code for the button click event such that when the button is clicked, the INSERT stored procedure runs. At the moment I'm using:
Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
SqlDataSource1.Insert()
End Sub
When I try to run my application I'm getting an error which reads:
Cannot insert the value NULL into column 'Email', table 'C:DOCUMENTS AND SETTINGSLUKE JACKSONMY DOCUMENTSVISUAL STUDIO 2005WEBSITESJACKSONSNURSERIESAPP_DATADATABASE.MDF.dbo.Customers'; column does not allow nulls. INSERT fails.The statement has been terminated.
The error message implies that I haven't set the necessary parameters correctly but I really don't know where I'm going wrong!
The code I'm using for my stored procedure is as follows:
ALTER PROCEDURE AddCustomer
(
@CustomerID int,
@Email nvarchar(50),
@Password nvarchar(MAX),
@Name nvarchar(50),
@Address1 nvarchar(50),
@Address2 nvarchar(50),
@Address3 nvarchar(50),
@City nvarchar(50),
@County nvarchar(50),
@PostCode nvarchar(50)
)
AS
INSERT INTO Customers
(Email, Password, Name, Address1, Address2, Address3, City, County, PostCode)
VALUES
(@Email, @Password, @Name, @Address1, @Address2, @Address3, @City, @County, @PostCode)
I'd be really grateful if anyone could help me out with this.
Thanks in advance,
Luke
p.s. just incase it helps, here's my createaccount.aspx page:
<%@ Page Language="VB" MasterPageFile="~/Master.master" AutoEventWireup="false" CodeFile="createaccount.aspx.vb" Inherits="createaccount" title="Untitled Page" %>
<%-- Add content controls here --%>
<asp:Content ID="Content1" runat="server" ContentPlaceHolderID="ContentPlaceHolder1">
<span style="text-decoration: underline"><strong>Create Account<br />
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="AddCustomer" SelectCommandType="StoredProcedure" InsertCommand="INSERT INTO Customers 	(Email, Password, Name, Address1, Address2, Address3, City, County, PostCode) 	VALUES 	(@Email, @Password, @Name, @Address1, @Address2, @Address3, @City, @County, @PostCode)">
<SelectParameters>
<asp:Parameter Name="CustomerID" Type="Int32" />
<asp:ControlParameter ControlID="textboxEmail" Name="Email" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="textboxPassword" Name="Password" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxName" Name="Name" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="textboxAddress" Name="Address1" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxAddress2" Name="Address2" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxAddress3" Name="Address3" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxCity" Name="City" PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="textboxCounty" Name="County" PropertyName="Text"
Type="String" />
<asp:ControlParameter ControlID="textboxPostCode" Name="PostCode" PropertyName="Text"
Type="String" />
</SelectParameters>
<InsertParameters>
<asp:Parameter Name="Email" Type="String" />
<asp:Parameter Name="Password" Type="String" />
<asp:Parameter Name="Name" Type="String" />
<asp:Parameter Name="Address1" Type="String" />
<asp:Parameter Name="Address2" Type="String" />
<asp:Parameter Name="Address3" Type="String" />
<asp:Parameter Name="City" Type="String" />
<asp:Parameter Name="County" Type="String" />
<asp:Parameter Name="PostCode" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
<br />
</strong></span>
<table style="font-weight: bold; width: 394px; text-decoration: underline">
<tr>
<td style="width: 111px; height: 21px; text-align: left">
Email:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxEmail" runat="server" Width="147px"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; height: 21px; text-align: left">
Password:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxPassword" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; height: 21px; text-align: left">
Name:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxName" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; text-align: left">
Address 1:</td>
<td>
<asp:TextBox ID="textboxAddress" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; height: 21px; text-align: left">
Address 2:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxAddress2" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; text-align: left">
Address 3:</td>
<td>
<asp:TextBox ID="textboxAddress3" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; text-align: left">
City:</td>
<td>
<asp:TextBox ID="textboxCity" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; height: 21px; text-align: left">
County:</td>
<td style="height: 21px">
<asp:TextBox ID="textboxCounty" runat="server"></asp:TextBox></td>
</tr>
<tr>
<td style="width: 111px; text-align: left">
Post Code:</td>
<td>
<asp:TextBox ID="textboxPostCode" runat="server"></asp:TextBox></td>
</tr>
</table>
<asp:Button ID="btnSubmit" runat="server" Text="Submit" />
</asp:Content>
Thanks again
View 1 Replies
View Related
Nov 18, 2014
Is there an Admin script that yields the following directories?
Data
Data Root
Log
TempDB
Shared Feature
Backup
View 4 Replies
View Related
Dec 9, 2014
I am trying to insert data into a table from an excel sheet using bulk insert statement.
This excel sheet has number of tabs.
How can I mention a specific tab in bulk insert statement.
View 5 Replies
View Related
Oct 10, 2007
I am trying to insert data into two different tables. I will insert into Table 2 based on an id I get from the Select Statement from Table1.
Insert Table1(Title,Description,Link,Whatever)Values(@title,@description,@link,@Whatever)Select WhateverID from Table1 Where Description = @DescriptionInsert into Table2(CategoryID,WhateverID)Values(@CategoryID,@WhateverID)
This statement is not working. What should I do? Should I use a stored procedure?? I am writing in C#. Can someone please help!!
View 3 Replies
View Related
Mar 14, 2014
I'm trying to modify a date range, but it's much more complicated.
Let's say I have existing date ranges of:
BlockIDStartDateEndDateActive
182013-12-31 00:00:002013-12-31 00:00:001
192014-01-01 00:00:002014-01-23 00:00:001
202014-01-24 00:00:002014-01-25 00:00:001
212014-01-26 00:00:002014-02-04 00:00:001
222014-02-05 00:00:002014-02-13 00:00:001
232014-02-14 00:00:002014-02-15 00:00:001
I've created code that will do the following (depending on the inputs):
1) Create new start and end dates
2) Inactivate obsolete date ranges
View 8 Replies
View Related
Apr 11, 2014
I'm trying to insert multiple records, each containing a null value for one of the fields, but not having much luck. This is the code I'm using:
Use InternationalTrade
Go
CREATE TABLE dbo.ACCTING_ADJUST
(
stlmnt_instr_id varchar(20) null,
instr_id varchar(20) not null,
[Code] ....
View 5 Replies
View Related
Apr 24, 2014
I have two tables. Table 1 has column "job", table 2 has column "job" and column "item". In table table 2 there are multiple "items" for each "job"
I would like to insert all of the "items" into table 1, based on a join table1.job = table2.job
View 7 Replies
View Related
Aug 14, 2015
I have a script that inserts rows from a linked server. It basically looks like this:
use mydb;
go
insert into my.table (col1, col2, ...)
select col1, col2, ...
from LinkedServer.db.my.table;
The DDL for both tables is identical: 550 columns (de-normalized from a data warehouse), of which 548 are varchar(max). The remaining two are varchar(255). (not my design! but unchangeable at the moment).
Running my query raises an error:
Cannot create a row of size 9948 which is greater than the allowable maximum row size of 8060.
The statement has been terminated.
Now, inserting rows on the table on the LinkedServer has never been an issue. (Since most columns are varchar(max), SQL has the option to store the data off-row.) The data is there, intact and whole. However, when pulling it into my target server using a LinkedServer (4-part naming), I get the error.
Three pairs of eyes have confirmed that the table definitions are identical on both source and target.
View 9 Replies
View Related
Jun 24, 1999
I think this is a very simple question, however, I don't know the
answer. What is the difference between a regular Temp table
and a Global Temp table? I need to create a temp table within
an sp that all users will use. I want the table recreated each
time someone accesses the sp, though, because some of the
same info may need to be inserted and I don't want any PK errors.
thanks!!
Toni Eibner
View 2 Replies
View Related
Nov 28, 2006
I want to make a query, stored procedure, or whatever which will only display the primary key where there does no exist a foreign key in linked table.For example. If I had two tables with a one to many relationship.A [Computer] has one or more [Hard Drives]. I want to select only those computers which do not have a Hard Drive(s) associated with them. That is, show all computers where the Computer_ID field in the [Hard Drives] table does not exist. This seems simple but I'm drawing a blank here.
View 1 Replies
View Related
Jan 31, 2008
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
View 3 Replies
View Related
