i have Two tables... with both the table having LastUpdated Column. And, in my Select Query i m using both the table with inner join.And i want to show the LastUpdated column which has the maxiumum date value. i.e. ( latest Updated Column value).
View 5 Repliesin my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').
i tried in my join query
these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')
its taking so much of time how t o solve ?
I would like to have records in my Absences table split up into multiple records in my query based on a start and end date.
A random record in my Absences table shows (as an example):
resource: 1
startdate: 2014-08-20 09:00:00.000
enddate: 2014-08-23 13:00:00.000
hours: 28 (= 8 + 8 + 8 + 4)
I would like to have 4 lines in my query:
resource date hours
1 2014-08-20 8
1 2014-08-21 8
1 2014-08-22 8
1 2014-08-23 4
Generating the 4 lines is not the issue; I call 3 functions to do that together with cross apply.One function to get all dates between the start and end date (dbo.AllDays returning a table with only a datevalue column); one function to have these dates evaluated against a work schedule (dbo.HRCapacityHours) and one function to get the absence records (dbo.HRAbsenceHours) What I can't get fixed is having the correct hours per line.
What I now get is:
resource date hours
...
1 2014-08-19 NULL
1 2014-08-20 28
1 2014-08-21 28
1 2014-08-22 28
1 2014-08-23 28
1 2014-08-24 NULL
...
... instead of the correct hours per date (8, 8, 8, 4).
A very simplified extract of my code is:
DECLARE @startdate DATETIME
DECLARE @enddate DATETIME
SET @startdate = '2014-01-01'
SET @enddate = '2014-08-31'
SELECTh.res_id AS Resource,
t.datevalue,
(SELECT ROUND([dbo].[HRCapacityHours] (h.res_id, t.datevalue, t.datevalue), 2)) AS Capacity,
(SELECT [dbo].[HRAbsenceHours] (9538, h.res_id, t.datevalue, t.datevalue + 1) AS AbsenceHours
FROMResources h (NOLOCK)
CROSS APPLY (SELECT * FROM [dbo].[AllDays] (@startdate, @enddate)) t
p.s.The 9538 value in the HRAbsenceHours function refers to the absences-workflowID.I can't get this solved.
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I have a table called TBLCataloghi
I have multiple records with colunms codpro and codcat equal
They differ only by a date called catalog.datfin
I'd like to select all rows but with the same codpro,codcat, obtaining ONLY the row with MIN () field datfin
Field datfin is a date..
Ex. codpro = 'PIPPO'
codcat = 'MK'
DATFIN = 01/01/2010
codpro = 'PIPPO'
codcat = 'MK'
DATFIN = 10/07/2014
I'd like to read both records but in SELECT obtain only the record with datfin MIN (01-10-2010)
I did the query but i was not able to do nothing of good. I obtain all times both records...
SELECT catalog.codpro AS CodProdotto,
catalog.codcat AS CodiceCatalogo,
MIN(catalog.datfin)
FROM pub.catalog
WHERE catalog.codcat = 'MK'
GROUP BY catalog.codpro,catalog.codcat ,catalog.datfin
Here is my setup: I have the following tables -
tblPerson - holds basic person data.
tblPersonHistorical - holds a dated snapshot of the fkPersonId, fkInstitutionId, and fkDepartmentId
tblWebUsers - holds login data specific to a web account, but not every person will have a web account
I want to allow my admins to search for users (persons) with web accounts. They need to be able to search by tblPerson.FirstName, tblPerson.LastName, tblInstitutions.Institution, and tblDepartments.Department. The only way a Person record is joined an Institution or Department record is through many -> many junction table tblPersonHistorical.
People place orders and make decisions in our system. Because people can change institutions and departments, we need an historical snapshot of where they worked at the time they placed an order or made a decision. Of course that means some folks will have multiple historical records. That all works fine.
So when an admin user wants to search for webusers, I only want to return data, if possible, from he most recent/current historical records. This is where I am getting bogged down. When I search for a specific webuser I simply do a TOP 1 and ORDER BY DateCreated DESC. That returns only the current historical record for that person/webuser.
But what if I want to return many different webusers, and only want the TOP 1 historical for each returned?
Straight TOP by itself won't do it.
GROUP BY by itself won't do it.
i have a query i.e.
select project, description from table
with results
chocolate | white
chocolate | black
chocolate | brown
sugar | black
vinegar | yellow
i would like to get a result like:
chocolate | white, blakc, brown
sugar | black
vinegar | yellow
so I would like to get all values of one project in one records included with separators/a space in it
I have two tables:
tblServer
tblInstance
tblServer represents a server, tblInstance represents any SQL Server instances present on the server. They're related thru srvID.
I'd like to write a query that gives me servers with all instances, on one row. This dataset will populate a List in an SSRS report.
I have this but it's clunky and does not provide for more than 2 instances on the server. I'd like this to account for any number of instances all on one row without having to hard code multiple joins:
with serverInfo as
(
select
srv.srvType as Type
,srv.srvName as ServerName
,srv.srvIP as ServerIP
,ins.instNetName as InstanceNetName
[Code] .....
I have a scenario where ID has three flags.
For example
ID flag1 flag2 flag3
1 0 1 0
2 1 0 0
1 1 0 0
1 0 0 1
2 0 1 0
3 0 1 0
Now I want the records having flag2=1 only.. I.e ID=3 has flag2=1 where as ID = 1 and 2 has flag1 and flag3 =1 along with flag2=1. I don't want ID=1 and 2.
I can't make ID unique or primary. I tried with case when statements but it I am somehow missing the basic logic.
I'm trying to insert multiple records, each containing a null value for one of the fields, but not having much luck. This is the code I'm using:
Use InternationalTrade
Go
CREATE TABLE dbo.ACCTING_ADJUST
(
stlmnt_instr_id varchar(20) null,
instr_id varchar(20) not null,
[Code] ....
I have two tables. Table 1 has column "job", table 2 has column "job" and column "item". In table table 2 there are multiple "items" for each "job"
I would like to insert all of the "items" into table 1, based on a join table1.job = table2.job
Is there a way to create one field from multiple records using sql.For exampleTable 1John 18Peter 18David 18Now I want an sql query that when executed will return a field thatlooks like thisQuery1John Peter DavidSo basically it will return one record with all the name in one field
View 4 Replies View Relatedjoin three tables and wont be duplicate records.
I have tried and attached the computed results and also expecting results.
IF OBJECT_ID('tempdb..#tmpExam1')IS NOT NULL DROP TABLE #tmpExam1
IF OBJECT_ID('tempdb..#tmpExam2')IS NOT NULL DROP TABLE #tmpExam2
IF OBJECT_ID('tempdb..#tmpExam3')IS NOT NULL DROP TABLE #tmpExam3
[Code]....
I have a SP that manipulates data for picking products and puts them into a temp table "#PickList" which is used for the basis of printing a picking note report.
I have also added code at the end of the SP to take the "#PickList" data and insert into a permanent table called "BWT_Lift_Transaction" and then use the bcp command to query it out to a text file. All this works fine, until the bcp command runs. Although the records are in the table, bcp returns nothing. Here is the code:
DECLARE @strLocation VARCHAR(50)
DECLARE @TransNum VARCHAR(50)
DECLARE @strFileLocation VARCHAR(1000)
DECLARE @strFileName VARCHAR(1000)
DECLARE @bcpCommand VARCHAR(8000)
[code].....
The earlier parts of the code create the filename for the text file and location to store it. If I insert a SELECT on the dbo.BWT_Lift_Transaction directly after the insert, I can see the data in there, but although the bcp command creates the file correctly, it returns no data:
output
NULL
Starting copy...
NULL
0 rows copied.
Network packet size (bytes): 4096
Clock Time (ms.) Total : 1
NULL
If I remove the delete statement at the end and run the code twice, it will insert the data into the table twice. On the first run, nothing is returned by bcp. On the second run, the first set is returned by bcp, not both sets.
I don't understand why this is, but I guess it's something to do with transaction commitment and the way bcp works.
I'm working on a report where my table is as follows:
WITH SampleData (ID,NAME,[VALUE]) AS
(
SELECT 170983,'DateToday','6/04/2014'
UNION ALL SELECT 170983,'DateToday','6/04/2014'
UNION ALL SELECT 170983,'employee','1010'
UNION ALL SELECT 170983,'employee','1010'
[Code] .....
Here is my query against the table above:
SELECT
ID
,MAX(CASE WHEN NAME = 'employee' THEN VALUE END) AS PERSON
,MAX(CASE WHEN NAME = 'DateToday' THEN VALUE END) AS REQUEST_DATE
,MAX(CASE WHEN NAME = 'LeaveStartDate' THEN VALUE END) AS REQUEST_START_DATE
,MAX(CASE WHEN NAME = 'LeaveEndDate' THEN VALUE END) AS REQUEST_END_DATE
,MAX(CASE WHEN NAME = 'HoursPerDay' THEN VALUE END) AS REQUESTED_HOURS
,MAX(CASE WHEN NAME = 'LeaveType' THEN VALUE END) AS REQUEST_TYPE
FROM SampleData
Here is the result from the above query, I'm not sure how to get the desired results (listed at the end):
IDPERSONREQUEST_DATEREQUEST_START_DATE REQUEST_END_DATE REQUESTED_HOURS REQUEST_TYPE
170983NULL6/04/2014NULL NULL NULL NULL
1709831010NULL NULL NULL NULL NULL
170983NULLNULL NULL NULL 8:00 NULL
170983NULLNULL NULL 6/16/2014 NULL NULL
[Code] .....
My Desired results are as follows:
IDPERSONREQUEST_DATEREQUEST_START_DATE REQUEST_END_DATE REQUESTED_HOURS REQUEST_TYPE
17098310106/04/20146/16/2014 6/16/2014 8:00 Personal
17102416/04/20146/17/2014 6/17/2014 8:00 Bereavement
I need to convert a OUTER APPLY hint in my query to LEFT JOIN.How it can be done?The code which is presently is this: OUTER APPLY Additional Fields. nodes('/AdditionalFields/AdditionalField') AS AF (C)
View 4 Replies View RelatedI have a problem. In my database I have the following numbers available:
101
104
105
110
111
112
113
114
What I need is to get a select query with records and sequentials numbers after it like:
101 0
104 1 (the number 105)
105 0
110 4 (the numbers 111,112,113,114)
111 3 (the numbers 112,113,114)
112 2 (the numbers 113,114)
113 1 (the numbers 114)
114 0
How can I do It?
rewrite the below two queries (so that i can avoid duplicates) i need to send email to everyone not the dup[right][/right]licated ones)?
Create table #MyPhoneList
(
AccountID int,
EmailWork varchar(50),
EmailHome varchar(50),
EmailOther varchar(50),
[Code] ....
--> In this table AccountID is uniquee
--> email values could be null or repetetive for work / home / Other (same email can be used more than one columns for accountid)
-- a new column will be created with name as Sourceflag( the value could be work, Home, Other depend on email coming from) then removes duplicates
SELECT AccountID , Email, SourceFlag, ROW_NUMBER() OVER(PARTITION BY AccountID, Email ORDER BY Sourceflag desc) AS ROW
INTO #List
from (
SELECTAccountID
, EmailWorkAS EMAIL
, 'Work'AS SourceFlag
FROM#MyPhoneList (NoLock) eml
WHEREIsOffersToWorkEmail= 1
[code]....
I’ve never written a query with multiple APPLY joins before and I’m running into some troubles with my first one. The below SQL statement runs within 10 seconds if I comment out either one of the APPLY joins and its corresponding field columns. However, when I try to execute with both APPLY joins, the query runs indefinitely. The longest I’ve waited before cancelling it is 90 minutes.
Now, I know there are probably other ways I could write this query to get me the results I’m looking for. I’m posting this on the board because I’m curious about finding out why multiple APPLY joins could cause SQL Server to run away. I’m hoping to gain some insight so that I can better understand how APPLY joins work so that in case I have a big need to do this again in the future (without suitable workarounds) I can code it correctly.
Here are some things I’ve tried so far…
1.Changed the States table into a subquery that only returns a single state
2.Change all the references inside the APPLY subqueries so that they had different aliases (just in case they were conflicting with each other).
3.Changed the CROSS applies to OUTER applies. States has 50 records and only 32 have matching permit data so the 18 extra iterations using OUTER APPLY don’t impact performance any when an APPLY is used by itself.
SELECT s.state_name
, COUNT(DISTINCT DUPS.PermitNumber) AS NumOfDupPermits
, SUM(DistinctPermits) AS DistinctPermits
FROM States S
CROSS APPLY (SELECT w.StateID, COUNT(*) as DistinctPermits
[Code] ....
I have database that holds column depicting various events and the last time that the event occurred.I query the database and I get a result like this:
Event Update Time
Event A 2014-10-14 00:35:00.000
Event B 2014-10-14 01:30:00.000
Event C 2014-10-14 00:35:00.000
Event L 2100-01-01 00:00:00.000..I would like to create another database to hold the various timestamps for each event. Some of these events happen every 2 minutes, others hourly, daily or monthly.I can query the source every minute. I do not want duplicate entries in the destination when the 'Update Time' has not been updated. Is it better to query the destination for the latest 'Update Time' value and only INSERT the new record when the time has been updated or just put a UNIQUE constraint on the Event and UpdateTime columns?
I have the got below T SQL query to fetch the matching record
DECLARE @MappingTable TABLE
(
Productname nvarchar(10),
identification_key1 int,
identification_key2 int,
identification_key3 int
[Code] .....
-- result - 'Orange'
This is an exact matching record and straight forward
Is it possible to identify the record using T SQL query based on the following scenarios
1) return the record - If all the three where conditions match
2) if record not found check and return the record where 2 columns values in the where condition match
-- Expected Result for below query: 'Orange', because 2 of the columns in where condition have matching values
SELECT Productname
FROM @MappingTable where identification_key1=1 or identification_key2 =2 or identification_key3 =1
-- result - 'Orange'
I have written an update, if i see the execution plan of that update, it is showing the Non Clustered index are updated. I am not able to understand the fact, that when there was no change in Leaf level root data how does Non clustered index got updated.
View 7 Replies View RelatedWe are getting data feed from Oracle database in our project. Everyday we will need to track if any rows got inserted/updated/deleted in the source and get that update right into our data warehouse.
Currently we are taking a dump of the required table (as it is) to our staging DB and comparing it with previous day data to track the changes (column by column comparison). This approach is working currently but has performance bottleneck. There is no tracking column (eg. last modified date or time) in source that will give us any idea of what got changed. Also there is no identity key or primary key in the source data.
Is there a way in SQL Server to get that inserted/updated records only instead of comparing column by column to track the changes?
What is the best way to use a left join in a SQL statement with multiple tables (more than 2)? I have a query that uses 7 tables, where most of the joins are inner joins, except for one, which needs to be a left join. The current SQL statement looks something like this:
SELECT [table1].[field1], [table2].[field1], [table3].[field1], [table4].[field1], [table5].[field1], [table6].[field1], [table7].[field1]
FROM [table1],[table2],[table3],[table4],[table5],[table6],[table7]
WHERE
[table4].[field2]=[table1.field2]{this is an inner join}
[table4].[field2]=[table2.field2]{this is an inner join}
[table4].[field2]=[table3.field2]{this is an inner join}
[table4].[field2]=[table5.field2]{this is an inner join}
[table5].[field3]=[table6.field2]{this is an inner join}
[table5].[field4]=[table7.field2]{this is needs to be a left join}
As it stands now, the last line in the WHERE clause is an INNER JOIN and limits the number of rows in my result. I need to select rows from [table7].[field2] whether or not a matching record exists in [table5].[field4]. The other INNER JOINS in the SQL statement must have matching records. Please advise.
Hello-
I have a sql query that I am using to populate a datagrid. The problem is one of the tables is a month table. and the other tables are full of data. So there is no common column name to match using a inner join "on".
How do i do this?
Hi,
I'm trying to retrieve some records from an SQL database.
I've a table named CustomerOrder with three fields - custID , productname and quantity
No keys in the table. it's row based approach. every custID can have multiple entries for different products.
Example:
CustID ProductName Quantity
1 Product1 2
1 Product2 3
2 XXX 1
2 Product1 2
1 Product3 4
I would like to write a query that gives the result as follows :
CustID ProductName Quantity
1 Product3 4
2 Product1 2
Meaning that, query has to retrieve only one record per custID based on highest quantity.
select custId,Productname,quantity from customerorder where quantity = (select max(quantity) from customerorder)
the above query returns only one record. (ofcourse..)
Kindly help me to get the desired.
Thank You.
i have a table which is having size and pieces information and say it is having following 4 records.
Size, pieces, sizeID, sizecombID (SizeCombination Id)
S, 1, 1, 1
M, 3, 2, 1
L, 3, 3, 1
XL, 1, 4, 1
Now suppose user enters all these 4 records which i will pass as xml string to my stored procedure.
Is there any way to check existense of all these 4 records in this table from the xml data which i pass by using one SQL statement ? Or what is the right way of checking it, Is it through using cursor ??
Finally after checking it should retrun SizeCombID for a existing record, and if record is not existent then it should add these 4 records in table and return the new SizeCombID.
Can somebody pls help on this..
I'm using a Merge statement to update/insert values into a table. The Source is not a table, but the parameters from a Powershell script. I am not using the Primary Key to match on, but rather the Computer Name (FullComputerName).
I am looking on how-to return the Primary Key (ComputerPKID) of an updated record as "chained" scripts will require a Primary Key, new or used.As an aside: the code below does return the newly generated Primary Key of an Inserted record.
CREATE PROCEDURE [dbo].[usp_ComputerInformation_UPSERT](
@FullComputerName varChar(50) = NULL
,@ComputerDescription varChar(255) = NULL
,@ComputerSystemType varChar(128) = NULL
,@ComputerManufacturer varChar(128) = NULL
[code]....
how to track how many rows updated or deleted per day in a single table and load the information in another table .
View 7 Replies View RelatedIf I update a recordset a group of records using dynamic SQL where I update the TOP n records, is it possible to get the set of records that was updated?
CREATE PROCEDURE usp_Structural_ScheduleComponent
@cProject char(7),
@cComponentID char(10),
@iPour int,
@iQuantity int,
@iAvailable int OUTPUT,
@dtCast datetime OUTPUT
AS
SET @dtCast = convert(char(10), getdate(), 120)
DECLARE @cSql varchar(500)
SET @cSql = 'UPDATE tbStructuralComponentSchedule SET PourNumber = ' + CAST (@iPour AS VARCHAR) + ', ScheduledDate = ' + '''' + CAST(@dtCast AS VARCHAR) + '''' +
' WHERE EntryID IN ( SELECT TOP ' + CAST(@iQuantity AS VARCHAR) +
' FROM tbStructuralComponentSchedule ' +
' WHERE fkProjectNumber = ' + '''' + @cProject + '''' +
' AND fkComponentID = ' + '''' + @cComponentID + '''' +
' AND IssueDate IS NOT NULL' +
' AND ScheduledDate IS NULL' +
' ORDER BY EntryID DESC)'
EXEC(@cSql)
IF(@@ERROR <> 0 OR @@ROWCOUNT < = 0)
RAISERROR('Failed to add components to pour!',16,1)
SELECT @iAvailable = SUM(CASE WHEN IssueDate IS NOT NULL AND ScheduledDate IS NULL THEN 1 ELSE 0 END)
FROM tbStructuralComponentSchedule WHERE fkProjectNumber = @cProject AND fkComponentID = @cComponentID
GO
-- Is there a way to return the recordset that were modified in the update?
Mike B
I have 3 tables:
TABLE [dbo].[Tbl_Products](
[Product_ID] [int] IDENTITY(1,1) NOT NULL,
[Product_Name] [nvarchar](50) NOT NULL,
[Catagory_ID] [int] NOT NULL,
[Entry_Date] [date] NOT NULL,
[Code] ....
I am using this query to get ( Product name from tbl_products , Buy Price - Total Price- Total Quantity from Tbl_Details )
But am getting a multiple result if the order purchase has more than 1 item :
SELECT DISTINCT B.Product_Name,A.AllPieceBoxes,
A.BuyPrice,A.TotalPrice,A.BuyPrice
FROM
Tbl_Products B INNER JOIN Tbl_PurchaseHeader C
ON C.ProductId=B.Product_ID INNER JOIN Tbl_PurchaseDetails A
ON A.PurchaseOrder=C.purchaseOrder
WHERE A.PurchaseOrder=3
I'm exporting the following query to a datagrid, however in the result set, some values are duplicated (for various reasons... mostly old software and poor categorization)...On the records with identical values, I want to look at the account number and the DateOfService fields and search for joint distinct values and only display that...Current Example: ACCT NUM | DATE OF SERVICE |________________________________ 43490 | 10/01/2006 08:15:23 | 35999 | 10/10/2005 12:00:00 | 35999 | 10/24/2005 12:45:30 | 35999 | 10/10/2005 12:00:00 | 35999 | 10/10/2005 12:00:00 | 23489 | 10/15/2006 15:13:23 |Desired Result: ACCT NUM | DATE OF SERVICE |________________________________ 43490 | 10/01/2006 08:15:23 | 35999 | 10/10/2005 12:00:00 | 35999 | 10/24/2005 12:45:30 | 23489 | 10/15/2006 15:13:23 |Here is the query I'm working with... just can't figure out how to join or limit the results to ONLY unique matches in Acct Number AND DateOfService. "SELECT tblCH.ProcedureKey AS CPT, tblPC.Description, DATEDIFF(d, tblPat.BirthDate, " & _ " { fn NOW() }) / 365 AS Age, tblPat.LastName, tblPat.FirstName, tblPat.BirthDate," & _ " CAST(tblCH.AccountKey AS varchar) + '.' + CAST(tblCH.DependentKey AS varchar) AS Account, tblCH.DateOfService " & _ " FROM dbo.Procedure_Code___Servcode_dat tblPC INNER JOIN " & _ " dbo.Charge_History___Prohist_dat tblCH ON tblPC.ProcedureKey = tblCH.ProcedureKey RIGHT OUTER JOIN " & _ " dbo.Patient_Info___Patfile_dat tblPat ON tblCH.AccountKey = (tblPat.AccountKey AND tblCH.DependentKey) = tblPat.DependentKey "Any suggestions from y'all SQL gurus? I have to have this report ready for production by tomorrow morning and this is the last fix I need to make =Thank you =)
View 6 Replies View RelatedI'm fairly new in SQL. Been trying for months to create the right script for this particular case but still cannot give me 100% result as required.
SCENARIO :
I am required to query from 2 tables for those unique record that meets both conditions below:-
1. Status is 1 @ max (trans_id), paychnl = CC
2. Status is 2 @ max (trans_id), paychnl = A or B
FYR, 2 tables and respective columns to query are as below:-
table PTFF --> col ID, TRANS_ID,TRANSDATE,EFFDATE,TRANSCODE
table CHFF --> col STATUS,PAYCHNL
FYI, status refers to the paychnl method status:-
==> 1 means the current paychnl method
==> 2 means the previous paychnl method
paychnl method can be multiple because it will be defined as 2 for all the histories' paychnl chosen earlier, but 1 should only be unique as it is the latest paychnl chosen for each unique ID. however, it may appear more than once when it's taking those in earlier TRANSDATE, so here we would need the max trans_id as it will show the latest updated TRANSDATE.
Apart from that, I need only those most recent paychnl to be A or B and the latest paychnl is CC so, this been indicated by the same max trans_id for the same ID.
Aft trying so many times on this MAX command but failed to get any result, I only managed to come up to this part only. please refer below:-
table PTFF --> col ID, TRANS_ID,TRANSDATE,EFFDATE,TRANSCODE
table CHFF --> col STATUS,PAYCHNL
SELECT DISTINCT PTFF.TRANSCODE,PTFF.ID,PTFF.TRANS_ID,PTFF.TRANSDATE,PTFF.EFFDATE, CHFF.STATUS,CHFF.PAYCHNL
FROM DBO.PTFF PTFF
JOIN DBO.CHFF CHFF
ON CHFF.ID = PTFF.ID
WHERE
PTFF.TRANSDATE BETWEEN 130501 AND 130831
AND PTFF.TRANSCODE='T522'
AND (CHFF.STATUS=1 AND CHFF.PAYCHNL='CC' OR (CHFF.STATUS=2 AND (CHFF.PAYCHNL='A' OR CHFF.PAYCHNL='B')))
However, the script above returns :-
1. All those records with STATUS 1 regardless paychnl is A or B in most recent status 2,
2. Expected results also appear ==> 1 same ID with status 1 while paychnl=CC and status 2 while paychnl=A or B
3. Also duplicates of expected results but for different TRANSDATE and not at MAX TRANS_ID
Samples of the result:-
IDSTATUSTRANS_IDPAYCHNLTRANSDATEEFFDATETRANSCODE
51881712CC13082920130920T522
9361164CC13081620140813T522
78531153CC13082020130814T522
8949151CC13081220130801T522
8949251B13081220130801T522
19081455CC13051620131129T522
19082455A13051620131129T522
19081409CC11101920111129T522
19082409A11101920111129T522
19081404CC11092920111129T522
19082404B11092920111129T522