T-SQL (SS2K8) :: Pivot Table - How To Get Right Count In First Data Mining Replacing Zeros

Mar 24, 2014

I run this code:

SELECT
Gruppo_Assegnatario,
[100] as stato1, [101] as stato2, [102] as stato3
FROM
(
select

[Code] ...

That extracts only zeros (columns "stato1", "stato2", "stato3"):

Gruppo_Assegnatariostato1stato2stato3
SDB_BE Vita Antiriciclaggio0 00
SDB_BE Vita Assistenza clienti000
SDB_BE Vita Emissione000
SDB_BE Vita Gestione Rendite000
SDB_BE Vita Liquidazioni000

[Code] ....

Unlike the "SourceTable":

select
CASE_ID_,
Stato,
Gruppo_Assegnatario
FROM TicketInevasiPerGruppoEStato
extracts

CASE_ID_ Stato Gruppo_Assegnatario
HD0000003736734 AssegnatoSDB_GBS Variazione
HD0000003736739 AssegnatoSDB_GBS Variazione
HD0000003736743 AssegnatoSDB_GBS Variazione
HD0000003736783 AssegnatoSDB_GBS Variazione
HD0000003736806 SospesoSDB_BE Vita Selezione

[Code] ....

How can I get the right count in the first data mining replacing the zeros (columns "stato1", "stato2", "stato3")?

View 5 Replies


ADVERTISEMENT

T-SQL (SS2K8) :: Pivot Query - Convert Data From Original Table To Reporting View

Apr 8, 2014

I want to convert the data from Original Table to Reporting View like below, I have tried but not get success yet.

Original Table:
================================================================
Id || Id1 || Id2 || MasterId || Obs ||Dec || Act || Status || InstanceId
================================================================
1 || 138 || 60 || 1 || Obs1 ||Dec1 || Act1 || 0|| 14
2 || 138 || 60 || 2 || Obs2 ||Dec2 || Act2 || 1|| 14
3 || 138 || 60 || 3 || Obs3 ||Dec3 || Act3 || 1|| 14
4 || 138 || 60 || 4 || Obs4 ||Dec4 || Act4 || 0|| 14
5 || 138 || 60 || 5 || Obs5 ||Dec5 || Act5 || 1|| 14

View For Reporting:

Row Header:
Id1 || Id2 || MasterId1 || Obs1 ||Desc1 ||Act1 ||StatusId1||MasterId ||Obs2 ||Desc2 ||Act2 ||StatusId2 ||MasterId3||Obs3 ||Desc3 ||Act3 ||StatusId3||MasterId4||Obs4||Desc4 ||Act4 ||StatusId4 ||MasterId5||Obs5 ||Desc5 ||Act5 ||StatusId5||InstanceId

Row Values:
138 || 60 || 1 || Obs1 ||Desc1 ||Act1 ||0 ||2 ||Obs2 ||Desc2||Act2 ||1 ||3 ||Obs3||Desc3 ||Act3 ||2 ||4||Obs4||Desc4 ||Act4 ||0 ||5 ||Obs5 ||Desc5 ||Act5 ||1 ||14

View 6 Replies View Related

Power Pivot :: Auto Refresh Excel Table (Not Pivot Table) Using Data Source

Jul 8, 2015

Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)

View 2 Replies View Related

How Count Column In Pivot Table- And Add Result Row

Jan 20, 2008

how count column in pivot table- and add result row
i need to calculate each column
for example
day1 day2 day3 day4 day5
-------------------------------------------------------------------------
1 2 1 2 3
1 2 3 2 2
2 3 2 1 2
2 3 0 0 0
-----------------------------------------------------------new result row
ok ok 1|2|3 1 3

i need to check each column
if i have twice each number
if not show the missing number
TNX




Code Block
DECLARE @Employee TABLE (ID INT, Date SMALLDATETIME, ShiftID TINYINT)
DECLARE @WantedDate SMALLDATETIME, -- Should be a parameter for SP
@BaseDate SMALLDATETIME,
@NumDays TINYINT
SELECT @WantedDate = '20080301', -- User supplied parameter value
@BaseDate = DATEADD(MONTH, DATEDIFF(MONTH, '19000101', @WantedDate), '19000101'),
@NumDays = DATEDIFF(DAY, @BaseDate, DATEADD(MONTH, 1, @BaseDate))

IF @Numdays > 28
BEGIN
SELECT p.ID,
p.[1] , p.[2],p.[3], p.[4], p.[5], p.[6], p.[7], p.[8], p.[9], p.[10], p.[11],
p.[12], p.[13], p.[14], p.[15], p.[16], p.[17], p.[18], p.[19], p.[20], p.[21],
p.[22], p.[23], p.[24], p.[25], p.[26], p.[27], p.[28], p.[29], p.[30], p.[31]
FROM (
SELECT ID,
DATEPART(DAY, Date) AS theDay,
ShiftID
FROM v_Employee
WHERE Date >= @BaseDate
AND Date < DATEADD(MONTH, 1, @BaseDate)
) AS y
PIVOT (
min(y.ShiftID) FOR y.theDay IN ([1], [2], [3], [4], [5], [6], [7],[8] , [9], [10], [11],
[12], [13], [14], [15], [16], [17], [18], [19], [20], [21],
[22], [23], [24], [25], [26], [27], [28], [29], [30], [31])
) AS p
END

View 12 Replies View Related

Power Pivot :: Force Measure To Be Visible For All Rows In Pivot Table Even When There Is No Data?

Oct 13, 2015

Can I force the following measure to be visible for all rows in a pivot table?

Sales Special Visibility:=IF(
    HASONEVALUE(dimSalesCompanies[SalesCompany])
    ;IF(
        VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
        ;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
        ;[Sales]
    )
    ;BLANK()
)

FYI, I also have other measures as well in the pivot table that I don't want to affect.

View 3 Replies View Related

Where Can I Store The Mining Results From Mining Models In SQL Server 2005 Data Mining Engine?

Apr 26, 2006

Hi, all here,

I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?

Thanks a lot for any help and guidance in advance.

View 4 Replies View Related

T-SQL (SS2K8) :: Transpose / Pivot Textual Data

Jan 19, 2015

In our contract management system, each contract has over 100 reference fields attached to it. These are all stored in single table with contract ID, reference GUID and value as the columns.

So you will have multiple rows for each contract....one for each of the reference fields and then the value attached to that reference.

I want to return the data so there is one row per contract with the reference fields as columns and the reference field values as the column data.

Can this be done using PIVOT as I have tried but not had any success?

View 6 Replies View Related

T-SQL (SS2K8) :: Possible Pivot / CTE Recursion Restructuring Of Data

Sep 7, 2015

I have a table (folderstructure) with the following columns:

pcmid, cmid, foldername
pcmid is the parent directory
cmid is the directory
foldername is the name of the directory

e.g. note, number of levels are unknown

cmid pcmid name
1 NULL c:
101 1 level1
201 101 level2
45 101 level2a
56 201 level3
57 201 level3a

I'm looking to create a table that has cmid followed by the full directory path

So either (using above):

cmid path
1 c:
101 c:level1
201 c:level1level2
45 c:level1level2a
56 c:level1level2level3
57 c:level1level2level3a

etc.

OR

cmid 1 2 3 4
1 c:
101 c: level1
201 c: level1 level2
45 c: level1 level2a
56 c: level1 level2 level3
57 c: level1 level2 level3a

etc.

I've can use recursion to allocate a level to each name /cmid/pcmid combination

I could use multiple self joins

Is there a way this can be achieved using pivots or CTE recursion or something else...

View 2 Replies View Related

T-SQL (SS2K8) :: Pivot Data Based On Columns Value In Year Column

Jun 4, 2014

I am trying to pivot data based on columns value in year column... but results are not showing up correctly. I want to see all columns after pivot.I want to Pivot based on year shown in the data but it can be dynamic as year can go for last 3 years

I am also using an inner join as i have two amount columns in my code and i want to show both amount columns for all displayed year.I am able to pivot but I need in output all the columns like this Id,MainDate, Year1,Year2,Year3(if any), AMT1 for YR1, AMT2 for Yr1, , AMT1 for YR2, AMT2 for Yr2, AMT1 for YR3, AMT2 for Yr3,

Here is some data:

-- CREATE TABLE [dbo].[TEMP](
--[FileType] [varchar](19) NOT NULL,
--[dType] [char](2) NOT NULL,
--[dVersion] [char](2) NOT NULL,
--[Id] [char](25) NOT NULL,
--[MainDate] [char](40) NULL,

[code]....

View 5 Replies View Related

T-SQL (SS2K8) :: Concatenate With Leading Zeros

Sep 9, 2013

I am creating a view which involved concatenation of 2 int columns.

The data in the columns look like

Column 1 Column 2
1234 1
12345 11

I am trying to get the following output

001234001
012345011

So the first column should have zeros padded to the front to make 6 numbers, the second column should be 3 numbers long with zeros in front. So when added together it is 9 numbers long.

View 9 Replies View Related

Reporting Services :: SSRS Matrix Click On The Count Like Pivot Table To Get Details

Apr 24, 2015

I am trying to create a matrix report to work similar to a pivot table, where when a user clicks on the count, the details are displayed. When I add the action to open a sub-report, how do I pass in the parameter values for the group that was selected? meaning if in row group- I have company name, and column group I have job title, when the count gets clicked, i need to pass in the company name for the row that was clicked along with the column group. How can I proceed?

View 2 Replies View Related

T-SQL (SS2K8) :: Table With 4 Columns - How To Fetch Count

Apr 30, 2014

I have one table say A and in which 4 columns are there. Out of 4 , one columns stores the queries like
'select * from table xyz' etc(Only select queries). I am writing a procedure in which I have to fetch this column and execute the query and wants to check whether query i.e. "select * from table xyz" contains any record or not. If yes , I am updating the table B with value as Pass , else Fail.

I used execute @queryfromvariable but it does not gives me count..

View 7 Replies View Related

T-SQL (SS2K8) :: Getting Undesirable Trailing Zeros After Casting To Decimal

Sep 7, 2014

The following line of SQL returns the first screen shot below.

((T0.TotalSales - ISNULL(T1.TotalSales, 0)) - (T0.StockValue - ISNULL(T1.StockValue, 0))) / (T0.StockValue - ISNULL(T1.StockValue, 0)) * 100 AS 'Gross Profit %'

I now want to limit the decimal places to two (2), and one might think that using a CAST operation here is the solution, as follows.

CAST(((T0.TotalSales - ISNULL(T1.TotalSales, 0)) - (T0.StockValue - ISNULL(T1.StockValue, 0))) / (T0.StockValue - ISNULL(T1.StockValue, 0)) * 100 AS decimal(15,2)) AS 'Gross Profit %'

However in actuality I am still seeing too many decimal places, but the extra ones have changed to ZEROS!

Ideally I would like to have no extra trailing zeros. How to achieve this?

View 2 Replies View Related

T-SQL (SS2K8) :: Return A Count Per Unique Check In Invoice Table?

May 12, 2014

We have a table that has customers invoices and payment records. In some cases a customer has 10 lines with 10 different invoice numbers but may have paid 2 or more invoices with one check. I need to know how many unique payments were made per customer.

Cust# Inv# Chk#
1 109 101
1 110 101
1 111 102
3 112 10003
2 113 799
2 114 800
1 115 103
3 116 10009
2 117 799
1 118 103

So I need the statement to update the customer table with the annual payments

Customer Table
Cust# Payments
1 3
2 2
3 2

I get close but just not getting it to sort itself out.

View 9 Replies View Related

Data Mining :: Informational (Data Mining) - Decision Trees Found No Splits For Model

Sep 29, 2015

I followed the tutorial posted at [URL] ...

Everything was ok until the last step where I had to process the mining structure which resulted in a warning

"Informational (Data mining): Decision Trees found no splits for model, Tbl Decision Tree Example."

What does this error mean? How do I resolve it? Also, I only see the first level in the Mining Model Viewer, I don't see the levels 2 and 3.

View 2 Replies View Related

Power Pivot :: Pivot Table Loses Text Wrapping For Text Data Upon Refresh

Apr 29, 2015

I have a pivot table that connects to our data warehouse via a PowerPivot connection.  The data contains a bunch of comment fields that are each between 250 and 500 characters.  I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.

However, whenever I refresh the data, the text wrapping un-sets itself.  Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text.  This is very burdensome on the user, and degrading the experience.

Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?

View 2 Replies View Related

How Can We Compare Other Data Mining Software Packages With SQL Server 2005 Data Mining?

Feb 23, 2007

Hi, all experts here,

I would like to know if there is any way to migrate third-party data mining packages with SQL Server 2005 data mining algorithms together then we can have a comparison among all of them to get the best results for training models.

I am looking forward to hearing from you.

Thanks a lot.

With best regards,

Yours sincerely,

View 1 Replies View Related

Data Mining - Scalar Mining Structure Column Data Type Error...

May 31, 2006

Hoping someone will have a solution for this error

Errors in the metadata manager. The data type of the '~CaseDetail ~MG-Fact Voic~6' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.

Is the problem due to the data type of the column used in the mining structure is Long, and the underlying field in the cube has a type of BigInt,or am I barking up the wrong tree?

View 16 Replies View Related

Data Mining :: Content In Data Mining Structure Not Valid - Deployment Fails

Apr 30, 2015

I'm a beginner with SQL 2012 SSDT & SSMS. I get this error message when I try to deploy my project: 

"Error 6
Error (Data mining): KEY SEQUENCE columns are not supported at the case level. The 'Customer Key' column of the 'TK448 Ch09 Cube Clustering' mining structure contains content that is not valid.
0 0
"
I am finding it hard to locate the content that is not valid. I've been trying to find a answer for this problem but can't seem to find anything. How can I locate the content that is not valid and change or delete it so that I can deploy this solution?

View 2 Replies View Related

Data Mining :: MS Excel Data Mining Add-ins / Maximum Number Of Predict Columns

Jun 4, 2015

Having successfully created :

- a data mining structure with about 80 columns.
- a data mining model using Microsoft_Decision_Trees with 2 prediction columns. 

I thought I would then explore the possibility of have more than 2 prediction columns, in this case 20.

I get an error message and I can't work out :
a) if this is because there's a limit to the maximum number of prediction columns and where that maximum is stated.
b) if something else has become corrupted
c) there's a know bug and if the error message is either meaningful or not.

Either way, I'm unable to complete the data mining wizard 

The error message is :Errors in the metadata manager. Either the mining structure with the ID of '[my model Structure]' does not exist in the database with the ID of 'DMAddinsDB', or the user does not have permissions to access the object.

View 3 Replies View Related

T-SQL (SS2K8) :: Replacing String Values With Contents Of Variable

Dec 19, 2014

So I have the following column named String in a table:

<key>Children</key><integer>2</integer>

This of course can vary for the different records. What's the best way to replace the 2 with the contents of my variable with TSQL?

declare @children int
set @children = 4

I want to do something like this:

SELECT <key>Children</key><integer>@children</integer>

View 4 Replies View Related

Error (Data Mining): The 'HISTORIC_MODEL_GAP' Data Mining Parameter Is Not Valid

Oct 25, 2007

Hi all,

I am using Microsoft_Time_Series and have set HISTORIC_MODEL_GAP to various values (from 1 to 21). I always get this error:
Error (Data mining): The 'HISTORIC_MODEL_GAP' data mining parameter is not valid for the 'My Time Series' model.

In Algorithm Parameters window, this parameters is not there by default, so I have to add it.

Any tip will be greatly appreciated.

View 3 Replies View Related

Data Mining :: Implementing Excel Data Mining In A Classroom Setting?

Jun 15, 2015

Implementing data mining Add-in in an academic setting?  We need to handle over 150 new students a semester and have their connection to Analysis Services survive for their four years at the college.  We are introducing data mining to every freshman business student as a unit within their Intro to Excel class (close to a month of work to give them a sense of what is possible).  Other courses later in their curriculum will expand on that introduction. 

Once implemented, we would have as many as 900 connections to manage (four years from now).  It is possible that multiple sections will be running at the same time, so 40 students may be accessing the data mining tools concurrently.   

Is there a way to "bulk establish" the access credentials and establish those databases?

View 4 Replies View Related

Data Mining :: How To Reduce Data Mining Processing Time

Aug 4, 2015

With SASS Database i have created Data mining Structure Using Time series algorithm, while processing the SSAS db, Data mining  taking long time to process, so how we can  reduce processing time ???

View 2 Replies View Related

How Is The 'Score' Value Derived In The Lift Chart/Mining Legend For Data Mining Models?

Sep 26, 2006

Hi,
I have just run a simple data set through a model to predict a simple true or false value (i.e. binary output)
The Lift Chart/Mining Legend in Analysis Services shows three results €“ Score, Population Correct (%), and Predict Probability (%)

Population Correct I beleive is the percentage of predictions it got right out of the total number of predictions it tried to make. Is this correct?

However, I can€™t work out how the other two are derived in particular the 'SCORE'. To give a live example the scores were as follows:

Model Score Pop Correct Pred Probability
Decision Trees 0.83 76.59% 54.28%
Neural Network 0.75 67.63% 50.05%
Ideal Model 100.00%


Can anyone help with this and give a detailed explanation?

Many thanks,
S Rajput

View 4 Replies View Related

Excel 2007 Data Mining Add-in Advance Create Mining Model Question

Apr 11, 2007

Hi,



I am trying to model data in analysis services with the Advance Create Mining Model function in the excel addin. I am having trouble creating an association model that works like the Associate button above the Advanced button.



The format of my data is like this



OrderID Product

100 Bike

100 Helmet

100 Shoes

200 Helmet

200 basketball

200 Bat

300 Shoes

300 Socks



The associate button works perfectly since it asks me which column is the transaction id (orderid) and which column I am trying to predict (product). The advanced create mining model asks me to determine what the columns are...

OrderID=key Product=Input+Predict?



When I run the advance create mining model associate, I get a browser that gives me no rules and the support for only one item itemset (each product but no combination of products).



Does anyone know what I have to do to get it to work like the associate button?

View 8 Replies View Related

Can I Filter The Data On Mining Structure, Mining Model?

Jul 18, 2006

I perform data mining on all products and a specific product category.
Do I need to create 2 data source views, one for all products and the other one for the specific product category?
Afterward, I run the Data Mining Wizard 2 times to create 2 mining structures.
I also need to add the same mining model (e.g. Bayes, Cluster) to each of these mining structures.
Is there any simple way to do it?

Thanks.
Joe.

View 3 Replies View Related

T-SQL (SS2K8) :: Varchar Datatype Field Will Ignore Leading Zeros When Compared With Numeric Datatype?

Jan 28, 2015

Need to know if the varchar datatype field will ingore leading zeros when compared with numeric datatype ?

create table #temp
(
code varchar(4) null,
id int not null
)
insert into #temp

[Code] .....

View 4 Replies View Related

Why Should We Sample Nested Table Separetely For Data Mining Model Trainings?

Dec 1, 2006

Hi, all here,

Thank you very much for your kind attention.

I dont think we should sample any nested tables for data mining model training? Since I think any nested tables are bound to the case table. Therefore whenever we sample the case table, the nested tables are like any other input attributes within the case table to be rectrieved as inputs accordingly?

Thank you very much for any guidance to clear my confusion.

With best regards,

Yours sincerely,

 

 

View 3 Replies View Related

EXPORTING DATA INTO A PIVOT TABLE

Dec 18, 2007

Hi All,
I am woriking with a package wherein i need to export data from SS TABLE to excel sheet, however the no of cells exceed the 65536 which is the limit in excel, i tried using the pivot option in data flow transformation, however i am unable to do this, how do i go about doing this. Can someone tell me the correct procedure plzzzzz.

Regards,
Pratik

View 2 Replies View Related

SQL Server 2008 :: Pivot Data In Table?

Jun 24, 2015

MyTable has the following data (Just a sample)

parent | NAme | Checked | contactmethod|Check2 | Other
974198 | Employment | true | Face to Face | true | null
974224 | Other | true | Face to Face | true | skills
974224 | Other | true | Contact | true | skills

I'd like to pivot on "parent"

In a perfect world I'd like to see output like

974198 | Employment | true | Face to Face | true | null

974224 | Other | true | Face to Face, Collateral Contact | true | skills

If there are more than one name or contactmethod for the same parent then they would be strung along with commas

View 1 Replies View Related

Dynamic PIVOT Table As Data Source View

May 29, 2008

I would like to use a dynamic pivot table in my data source view. It seems that a named query can be only one sql statement. So, I cannot use my multi-statement procedure that creates a dynamic pivot table output.

What is the best course of action here? I could hard-code my pivot table query. I could maintain a redundant table in the pivot format. Do I have any good options?

KenS


Ken

View 1 Replies View Related

SSMS Express: Using PIVOT Operator To Create Pivot Table - Error Messages 156 &&amp; 207

May 19, 2006

Hi all,

In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO

A desired Pivot Table is like:

MW2 MW6S MW7 TripBlank

Acetone 1.00 1.00 1.00 1.00

Dichloroethene 1.00 1.00 1.00 1.00

Trichloroethene 20.00 1.00 1.00 1.00

Chloroform 1.00 1.00 1.00 0.76

Methylene Chloride 1.00 1.00 1.00 0.51

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:

USE MyDatabase

GO

USE TABLE dbo.LabData

GO

SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank

FROM

(SELECT SampleName, AnalyteName, Concentration

FROM dbo.LabData) p

PIVOT

(

SUM (Concentration)

FOR AnalyteName IN ([1], , [11], [16])

) AS pvt

ORDER BY SampleName

GO

////////////////////////////////////////////////////////////////////////////////////////////////////////////////

I executed the above-mentioned code and I got the following error messages:



Msg 156, Level 15, State 1, Line 1

Incorrect syntax near the keyword 'TABLE'.

Msg 207, Level 16, State 1, Line 1

Invalid column name 'AnalyteName'.

I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.

Thanks in advance,

Scott Chang

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved