T-SQL (SS2K8) :: Retrieve Points From Table Based On The Fields When Mapped
Dec 1, 2014
I need to retrieve the pts from table #test1 based on the fields when mapped..
Name & Type columns should match ..Based on the data below the output should be
id NameTypeCode CityIType BPS
1EGFN432 HY F2 10
2 EG FN 432 ON F1 20
3 EG FN 433 On F1 30
It has order of priority to get points
1.When all of the field matches then get the respective pts .
2.When name and Type matched and rest fields doesnt match but is null in #test2 table then retrieve those pts
--drop table #test
--drop table #test1
Create table #test
(
id int identity(1,1) not null,
Name varchar(100) NULL,
[Code] .....
View 3 Replies
ADVERTISEMENT
Apr 5, 2007
hi all
i deleted 8 fields from a table and i need to retrieve them back, is there a way to do that.
please help it is very urgent
View 3 Replies
View Related
Jun 8, 2015
I have to check for existence of mount points on drives and retrieve the Space information for those mount points. Is this even possible with t-sql??
View 2 Replies
View Related
Dec 27, 2014
I need to retrieve columns names(instead of select * from) as single row from table in dynamic way.
i m using following query.
its working fine while using from selected database. but its not working when i m running from different database.
DECLARE @columnnames varchar(max)
select @columnnames = COALESCE(@columnnames,'')+column_name+',' from INFORMATION_SCHEMA.COLUMNS(nolock)
where table_name='table_20141224'
select @columnnames
I need to pass database name dynamically like using by variable.
Is this possible to use variable after from clause. or any other methods?
eg:
DECLARE @columnnames varchar(max)
DECLARE @variable='db_month11_2014'
select @columnnames = COALESCE(@columnnames,'')+column_name+',' from @VARIABLE.INFORMATION_SCHEMA.COLUMNS(nolock)
where table_name='table_20141224'
select @columnnames
View 9 Replies
View Related
Feb 6, 2007
Hello!
I have 2 tables, one that contains a set of codes and their definitions, and another where each record has a field that contains several of these codes separated by commas:
Tab1
SubCode | Definition
---------------
S100 | Def of S100
S101 | Def of S101
S102 | Def of S102
Tab2
DepID | Purpcode |SubCodes
-----------------------------
1 | P100 | S100,S101,S102
1 | P101 | S100, S101
2 | P101 | S100,S102
I'm trying to create a query against Tab1 so that it retrieves a recordset of Subcodes and definitions based on the contents of the Subcodes field for a record in Tab2. I've tried this using a subquery, as follows:
SELECT SubCode ,Definition
FROM Tab1
WHERE SubjectCode IN
(SELECT CHAR(39) + REPLACE(SubjectCodes, CHAR(44), CHAR(39 + CHAR(44)+ CHAR(39)) + CHAR(39)
FROM Tab2
WHERE DepID = 1 AND PurposeCode = 'P101')
The subquery will return: 'S100','S101' and I expect the final recordset to be:
SubCode | Definition
---------------
S100 | Def of S100
S101 | Def of S101
However, it's not returning any records. If I execute the subquery separately and then plug its results into the main query e.g.
SELECT SubCode ,Definition
FROM Tab1
WHERE SubjectCode IN ('S100','S101')
it returns the expected recordset. Does anyone have any pointers? It's driving me nuts..
Cheers
Greg
Complete DDL, Sample Data, and Query below:
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[SubjectCodeDefinition]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[SubjectCodeDefinition]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[DepartmentReturn]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[DepartmentReturn]
GO
CREATE TABLE [dbo].[SubjectCodeDefinition] (
[SubjectCode] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Definition] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[DepartmentReturn] (
[DeptID] [int] NULL ,
[PurposeCode] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[SubjectCodes] [varchar] (250) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
) ON [PRIMARY]
GO
INSERT INTO SubjectCodeDefinition(SubjectCode, Definition)
SELECT 'S100', 'Definition of Code S100' UNION ALL
SELECT 'S101', 'Definition of Code S101' UNION ALL
SELECT 'S102', 'Definition of Code S102' UNION ALL
SELECT 'S103', 'Definition of Code S103' UNION ALL
SELECT 'S104', 'Definition of Code S104' UNION ALL
SELECT 'S105', 'Definition of Code S105'
GO
INSERT INTO DepartmentReturn(DeptID,PurposeCode,SubjectCodes)
SELECT 1,'P100','S100,S101,S104' UNION ALL
SELECT 1,'P101','S102,S103' UNION ALL
SELECT 1,'P102','S100,S101,S105' UNION ALL
SELECT 2,'P100','S100,S101,S104,S105' UNION ALL
SELECT 2,'P103','S103,S104,S105' UNION ALL
SELECT 3,'P100','S100,S102,S104'
GO
SELECT SubjectCode ,Definition
FROM SubjectCodeDefinition
WHERE SubjectCode IN
(SELECT CHAR(39) + REPLACE(SubjectCodes, CHAR(44), CHAR(39)+ CHAR(44)+ CHAR(39)) + CHAR(39)
FROM DepartmentReturn
WHERE DeptID = 1 AND PurposeCode = 'P102')
View 1 Replies
View Related
Jul 18, 2011
I have a requirement like, we are having two tables in our database.
Table names: student, marklist
Student table values:
id studname
------------------
1x
2y
3z
4a
5b
Marklist table values:
id maths physics English
---------------------------------
1506070
2706040
3508070
45010070
5906070
But my requirement is, I need to display the data "subject wise" highest marks for each student.
for example:
id name highestmark
---------------------------------
1 x English
View 9 Replies
View Related
Apr 23, 2008
I have 2 tables with 2 fields in common between them. How do I get a count of rows in table 1 but not in table 2 matching those 2 fields? Thanks.
View 7 Replies
View Related
Sep 22, 2014
Any function that determines the geometric function from a series of spatial points (geometric or geographic.)?
If not I am ready to build one ... I found a clean C++ implementation that I can translate to T-SQL.
View 9 Replies
View Related
Jul 16, 2014
I have 2 tables:
Table Transaction
-----------------
EmpID TransDate
00001 1/1/2014
00001 1/2/2014
00001 1/3/2104
00001 1/4/2014
00001 1/5/2014
00001 1/6/2014
00001 1/15/2014
00001 2/1/2014
00001 2/2/2014
00001 2/20/2004 ....
Table Master
---------------------------
EmpID EffectiveDateFr Group
00001 1/1/2014 A
00001 1/5/2014 B
00001 1/9/2014 C
00001 2/1/2014 B
00001 2/20/2014 A ....
I want to create query the output should be:
EmpID TransDate Group
00001 1/1/2014 A
00001 1/2/2014 A
00001 1/3/2104 A
00001 1/4/2014 A
00001 1/5/2014 B
00001 1/6/2014 B
00001 1/15/2014 C
00001 2/1/2014 B
00001 2/2/2014 B
00001 2/20/2004 A
View 4 Replies
View Related
May 20, 2015
Assuming I have a table similar to the following:
Auto_ID Account_ID Account_Name Account_Contact Priority
1 3453463 Tire Co Doug 1
2 4363763 Computers Inc Sam 1
3 7857433 Safety First Heather 1
4 2326743 Car Dept Clark 1
5 2342567 Sales Force Amy 1
6 4363763 Computers Inc Jamie 2
7 2326743 Car Dept Jenn 2
I'm trying to delete all duplicate Account_IDs, but only for the highest priority (in this case it would be the lowest number).
I know the following would delete duplicate Account_IDs:
DELETE FROM staging_account
WHERE auto_id NOT IN
(SELECT MAX(auto_id)
FROM staging_account
GROUP BY account_id)
The problem is this doesn't take into account the priority; in the above example I would want to keep auto_ids 2 and 4 because they have a higher priority (1) than auto_ids 6 and 7 (priority 2).
How can I take priority into account and still remove duplicates in this scenario?
View 3 Replies
View Related
Dec 12, 2014
There is a table [Formula_Calc] with formula calculations that need to be replaced with relevant values based on another table [Totals]
[Totals]
RowNo|Total
F1|240
F2|160
F3|180
F11|1000
F12|1500
F13|2000
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16.
Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100);
DECLARE @Total NVARCHAR(100);
SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total)
FROM [Totals]
SET @Total='select '+@formula
EXECUTE sp_executesql @Total;
PRINT @Total;
View 3 Replies
View Related
Jun 30, 2014
Below is sample SQL:
SQL_1: Creates a database
SQL_2: Creates 2 stored procedures
Now, I need to search database SP`s for Table2 t2 ON t2.CID = t1.CID and ALTER them with Table2 t2 ON t2.CID = t1.CID.
INNER JOIN Table3 t3 ON t3.CID = t1.CID
WHERE CustGroup = 'Employees'SQL_1:
USE [master]
GO
[code]...
View 6 Replies
View Related
Nov 22, 2015
I am working with a vendor application called Cisco Unified Attendant Console - it operates on a Windows server with a SQL express database. The CUPs function of the application needs to reference a "contact" field with only the user portion of the contact's email address - generally, the contact's User ID will match the user portion of their email address, however, for this customer it does not (they use the employee number as the User ID and firstname.lastname as user portion of the email address.
Writing a script to accomplish the following:
The dbo.Contact_Properties table of the ATTCFG database has the following fields that we can work with:
- First_Name
- Last_Name
- Email
- User_Field_2
- Contact_Unique_Ref (appears to be the field that ties all other contact tables together ?)
Is it possible to create a script that could run daily to either, combine the First_Name and Last_Name fields (with a period between) and populate the User_Field_2 field for each user, or populate the User_Field_2 field with everything before the @ symbol in the Email field for each user?
Also, by default the servers that this application is installed on does not have SQL Server Management Studio installed - is it possible to accomplish with PowerShell script triggered from the Windows Scheduler?
View 5 Replies
View Related
Feb 26, 2015
I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:
select [uplift specialty], [member po],[practice unit name], [final nomination status]
,[final uplift status], [final rank], [final uplift percentage]
,practiceID=row_number() over (partition by [practice unit name] order by Metricname)
,metricname,Metricvalue, metricpercentilerank
[code]....
Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:
GDR (nvarchar(255), null)
GDR Percentile Rank (nvarchar(255), null)
GDR PGS (nvarchar(255), null)
GDR Rank Number (nvarchar(255), null)
PMPM (nvarchar(255), null)
[Code] ....
These are imported from an Excel Workbook so that's why all the columns with spaces for now.
View 9 Replies
View Related
Jul 2, 2015
I am using MS SQL 2012. I have a table that contains all the data that I need, but I need to summarize the data and also add up decimal fields while at it. Then I need a total of those added decimal fields. My data is like this:
I have Providers, a unique ID that Providers will have multiples of, and then decimal fields. Here are my fields:
ID, provider_name, uniq_id, total_spent, total_earned
Here is sample data:
1, Harbor, A07B8, 500.00, 1200.00
2, Harbor, A07B8, 400.00, 800.00
3, Harbor, B01C8, 600.00, 700.00
4, Harbor, B01C8, 300.00, 1100,00
5, LifeLine, L01D8, 700.00, 1300.00
6, LifeLine, L01D8, 200.00, 800.00
I need the results to be just 3 lines:
Harbor, A07B8, 900.00, 2000.00
Harbor, B01C8, 900.00, 1800.00
LifeLine, L01D8, 900.00, 2100.00
But then I would need the totals for the Provider, so:
Harbor, 1800.00, 3800.00
View 3 Replies
View Related
Sep 11, 2015
I have a record in an Excel format (Excel 2010) and I would like to bulk import that into SQL Server 2008 and also while importing, SQL Server will automatically create a new table based on the header fields or row of the source file.
I am not sure if SQL Server 2008 has this capabilities.
View 0 Replies
View Related
Dec 10, 2007
I have the following data.
CustomerID Address
1 Spencer St
2 Frank Way
3 Jolly Dr
and i need to extract the address as 2 seperate fileds like so,
CustomerID Street Suffix
1 Spencer St
2 Frank Way
3 Jolly Dr
keep in mind that the Customer table has 2 million records.
View 5 Replies
View Related
May 21, 2008
Dear experts,
Hi, I got a table name Employee, with the following fields
EmployeeID
Name,
ManagerID
ManagerID2,
ManagerID3,
ManagerID4 ..
ManagerID, ManagerID2, ManagerID3, ManagerID4 are all pointing to EmployeeID in the same table.
Now I want to select the all employee records where the manager NAME is like '%Raymond%'. (i.e. any of the four managers name is like '%Raymond%'.
How do I construct the select query? I tried this, but it does not work if there are more than 1 manager named 'Raymond'
DECLARE @Name varchar(50)
SET @Name = '%Raymond%'
DECLARE @EmployeeNumber nvarchar(50)
Select
@EmployeeNumber = EmployeeID
from
Employee
where
[Name] like @Name
SELECT
'HumanResources.Employee' as TableName,
E.[Name] as EmployeeName ,
isnull((Select [Name] from Employee E2 where E2.EmployeeID = E.ManagerID),'') as Manager1,
isnull((Select [Name] from Employee E2 where E2.EmployeeID = E.ManagerID2),'') as Manager2,
isnull((Select [Name] from Employee E2 where E2.EmployeeID = E.ManagerID3),'') as AppraisingManager,
isnull((Select [Name] from Employee E2 where E2.EmployeeID = E.ManagerID4),'') as ModeratingManager,
E.CurrentFlag as Active
FROM
HumanResources.Employee E
WHERE
(E.[ManagerID] = @EmployeeNumber)
or (E.[ManagerID2] = @EmployeeNumber)
or (E.[AppraisingManagerID] = @EmployeeNumber)
or (E.[ModeratingManagerID] = @EmployeeNumber))
Any help is very much appreciated.
View 5 Replies
View Related
May 3, 2007
I Apologize if this isn't the forum to ask this...
I have a MS Access (MDB) file with a table with 2 date fields, i want to read from a dialog on my app (on MS Visual .NET Studio 2005), here's the code I've been using do far:
Code Snippet
hr=theApp.m_cs.Open(theApp.m_ds);
if(SUCCEEDED(hr)) {
theApp.m_cs.StartTransaction();
theApp.m_cs.Commit();
CCommand< CDynamicAccessor > cmd;
CComBSTR query(_T("SELECT NumContrato, NumClie, FechaC, FechaCob, Inversion, NoCobrador, NoVendedor, Total, Plazo, Pagos FROM Contrato"));
CString string(query.m_str);
cmd.Open(theApp.m_cs,string);
hr = cmd.MoveFirst();
query=static_cast< BSTR >(cmd.GetValue(1));
CString csres(query.m_str);
this->m_numc=(int)*(query.m_str);
query=static_cast< BSTR >(cmd.GetValue(2));
m_numcte=(int)*(query.m_str);
query=static_cast< BSTR >(cmd.GetValue(3));
//m_fecc=(int)*(query.m_str);
MessageBox(csres);
theApp.m_cs.Close();
}
FechaC, FechaCob, are the two Dates I want to retrieve, but when I debug, it reads a 0 (zero) from the date fields, is there a limitation? can they be read? is there a special way to read them?
> thanks in advance!
-----
Me!
View 3 Replies
View Related
Mar 26, 2014
The following query was used for retrieving dates for the last 7 days . Untill February this query was running fine and would return the last seven days date including today.
SELECT DISTINCT TOP 7 Convert(DateTime, DATEDIFF(DAY, 0, DateCreated)) AS DateCreated,
datepart(dw,DateCreated) AS WeekNum from [TechnologyRepository].[helpdsk].[WorkDetails]
WHERE DATEDIFF(DAY, Convert(DateTime, DATEDIFF(DAY, 0, DateCreated)),GETDATE()) <= 7
However from March (not sure of the exact date)..the query below would only give us 7 days until yesterday..i.e it would list dates from 3/19,3/20,3/21,3/22,3/23,3/24,3/25 and not 3/26 ..
I changed the query to <= 6 and it works as expected. But still not sure why it would not return todays date with <= 7.
SELECT DISTINCT TOP 7 Convert(DateTime, DATEDIFF(DAY, 0, DateCreated)) AS DateCreated,
datepart(dw,DateCreated) AS WeekNum from [TechnologyRepository].[helpdsk].[WorkDetails]
WHERE DATEDIFF(DAY, Convert(DateTime, DATEDIFF(DAY, 0, DateCreated)),GETDATE()) <= 6
View 5 Replies
View Related
Mar 27, 2008
Can anyone point me to a book or give me a cookbook recipe for creating a proxy table in Sybase 12.5 that points to a MS SQL Server 2005 table?
I have searched the forum, Sybooks, and BOL and it appears that it can be done.
View 4 Replies
View Related
Sep 23, 2015
The parent table has the column OrderID which is the primary key. There is a unique non-clustered index in the same table with the same column and some included ones. A child table references the parent table on the OrderID column. Unfortunatelly, in the sys.foreign_keys table the index that has been used to acomplish the referential integrity is the unique non-clustered one instead of the primary key (which is the clustered index as well).
This is causing issues in some maintenance tasks where we need to disable all the indexes of the table apart from the clustered index. Disabling these indexes leeds to disabling the not properly configured foreign key as well. Maybe dropping the index create the constraint again and then recreate the index is a workarround but I wish to have something more elegant and future proof.
View 4 Replies
View Related
Jun 22, 2007
Greetings everyone, I'm posting this thread with the hope that someone will notice it and might offer me a helping hand regarding one of my problems.I have the database named "DBEXAMPLE" with the table MEMB_INFO that contains two important columns that are named cur_points and points where cur_points column contains the total available points that a member can use/spend on a game and the points column stores the total of the points that a member used so far.So as i plan to wipe all data of the database, i need to keep the member login,password and total points that each member purchased.So i will somehow need to update the cur_points column with the total of current cur_points+points columns and then wipe points column.I've personally asked a friend regarding this and he said that this should be something complicated and it might require php also.Really appreciate if someone could help me regarding this.small schema:Database: DBEXAMPLETable: MEMB_INFOColumn cur_points -> total available points that a member can spendColumn points -> total points that the member has already spentColumn memb___id -> member login aka account idTODO -> update cur_points column with the total of cur_points+points columns for each member(buyer)With best regards.
View 5 Replies
View Related
Jan 4, 2008
hi,
i am generating report for my project.
my table goes like
ID VASID VASSID JanMail JanVisit JanPhone JanComment FebMail FebVisit FebPhone FebComment................. DecPhone
1 25 4 True False False Mail me False True False Visit me
My report has 3 check boxes for Mail,Visit,Phone respectively and a listbox of 12 months january-december respectively..
once user check on Mail and select a month suppose January in my report,the report should generate only January Comments.
here user can select any number of months.if user selects january,february and march, report should generate respective months Comments.
Please help me in writing SQL Query to get the comments.......
if any one know the solution for the above problem,Please help me
Thanks & Regards,
View 2 Replies
View Related
Jun 23, 2015
Goal: My request is the retrieve the return result from sp_Test as 8, 2, 4, 1 ,3 (take a look at picture 1) based on the chronological list from User-Defined Table Type dbo.tvf_id.
Problem: When I execute the stored procedure I sp_Test I retrive the list that is from 1 to 8. I don't know how to do it?
Information: I'm using SQL server 2012
create table datatable (id int,
name varchar(100),
email varchar(10),
phone varchar(10),
cellphone varchar(10),
none varchar(10)
);
insert into datatable values
[Code] .....
View 2 Replies
View Related
Oct 16, 2015
In my SSIS package I have flat files as a source, I have to load numbers of flat files into SQL target table. I am using For each loop container for that. I am doing it correctly. My aim is to validate the source data from all angle before writing it into target sql table. I am using below points to validate the source data , if I found any bad data I am redirecting those data to error output.
To Checking
1. To check whether data type of column.
2. To check whether buisinesskey column null.
Is there any thing which I am missing to validate source data.
Screen shot for reference
View 10 Replies
View Related
Feb 20, 2008
How can I create a Table whose one field will be 'tableid INT IDENTITY(1,1)' and other fields will be the fields from the table "ashu".
can this be possible in SQL Server without explicitly writing the"ashu" table's fields name.
View 8 Replies
View Related
Sep 5, 2014
I have a text field that I need to parse out into 4 fields.
30.125x23.625-18.875x25.375
6.1875X19.375-2.4375x15.625
0X0-0x0
26.875X11.375-11.125x22.875
0X0-0x0
0X0-0x0
6.1875X26.875-2.4375x23.125
6.1875X26.875-2.4375x23.125
6.1875X26.875-2.4375x23.125
26.625X14.875-11.125x22.875
26.625X14.875-11.125x22.875
I need to 26.625X14.875-11.125x22.875 should be 26.625 then 14.875 then 11.125 then 22.875
View 5 Replies
View Related
Mar 13, 2015
I'm archiving some data. In a 2 step process.
1. Copy old data from each table in LiveDB to same table in ArchiveDB.
2. Delete the data from each table in LiveDB which is in ArchiveDB
Both DBs SIMPLE recovery mode.
Each table has a clustered PK on a single int value. In both DBs
The tables with varchar(max) columns are taking a v.long time to copy over.
IS there anything I can change in the ArchiveDB to make it run faster.
It is the insert that is taking the time. I've tried dropping the clustered PKs in ArchiveDB tables and then rebuilding afterwards but it has not made any difference. After all I am adding data to the ArchiveDB in clustered index order, so wouldn't have expected it to.
How I can change the Archive DB but cannot touch the schema/settings of Live DB.
View 9 Replies
View Related
Sep 30, 2015
I need to build an update query for all my article beginning with '0.%' for my varchar field refkey, but depending on some conditions.
For example.
Case st.base <> '' and st.qttbase <> 0
Theo refkey = B
Case st.cos <>'' and st.qttcos <> 0
Then refkey = C
Case st.refo <> '' and st.qttrefo <> 0
Then refkey = R
But my problem are That i can have Many combination on refkey, for example:
B,BC,BCR,C,CB,CBR,R...and so on.
Also i need to separate the letters with comma, like:
B
B,C
B,C,R
.....
View 6 Replies
View Related
May 27, 2014
I have a table having multiple fields but I need to extract data based on the two fields.
Field1 Field2
1 | 123
1 | 213
2 | 123
2 | 3654
2 | 4758
I want the result with 2 cases
1.) distinct in Field 1 but multiple in field 2
Expected result:
Field1 column1 column2 column3
1 | 123 | 213
2 | 123 | 3654 | 4758
2.) multiple in field 1 but distinct in field 2
Expected Result :
Field 2 | Column1 | Column2
123 | 1 | 2
There may be more columns added according to the data available.
View 7 Replies
View Related
Aug 17, 2005
writes "Hi,
I am VERY new to SQL and I do not know if I am word this question correctly, so forgive me.
I would like to create a new table that does calculations on some of the same fields.
•IPA number (from the IPA_Num field)
•Total number of Rx's (sum of rx field )
•Total Paid( sum of amt_paid field)
•Total generic paid (If the field drugs = 1 then sum the amt_paid field)
•Percent generic (If the field drugs = 1 then sum and divide by the sum of the field rx)
•Percent formulary (if the formulary field = A then sum and divide by the rx field)
•Cost difference ( Average amount paid per brand Rx - average amount paid per generic Rx )
Any help is greatly appreciated.
Blessing to all
Yvonne"
View 5 Replies
View Related
Jan 24, 2008
Hi,
I have a table with eight (8) fields, including the primary key (rfpid). Three of the fields are foreign keys, which take their values form lookup tables. They are int fields (pmid, sectorid, officeid). One of the fields in this table is based on putting together the descriptive field in the lookup table for sector (tblsector). The two other fields to be part of this string are the rfpname and rfpid. This creates the following string:
rfpsector_nameproposalscurrent_year
fpname_08_rfpid
NOTE:
The words rfp, proposals are words that have to be part of string;
the slashes are to also appear.
current_year would be defaulting to datepart = year (2008)
The part that has the last two digits of the current year then the underscore and then the rfpid should be connected by an underscore to the rfpname.
I am at a loss and would greatly appreciate any help.
Thanks
View 51 Replies
View Related