Create table control_Total ( Filename varchar(1000) )
insert into control_Total values('PCH123_TLNX.account.TUED.20150831.txt Bytes:645 Records:4')
insert into control_Total values('PCH123_TLNY.account.TWED.20150831.txt Bytes:1920 Records:12')
how can I get output like this :
FileName RecordCountBytes
PCH123_TLNX.account.TUED.20150831.txt4645
PCH123_TLNY.account.TWED.20150831.txt121920
I want to display records from @table1 only when combination of col2,col3 and col4 are present in @table2.In Below case I want output as: below two records only.
'test1', 'need this record', 25, {d '1901-01-01'}
'test3', 'some longer value', 23, {d '1900-01-01'}
declare @table1 table (
col1 varchar(10) not null,
col2 varchar(200) null,
col3 int not null,
[code]....
Scenario is like that single dept can have multiple LocationHeads, If Location heads are multiple then they should display in single column using *starting the name as mentioned bottom under required output.
Below is sample of data:
create table #Temp(depID int, Name varchar(50),LocationHead varchar(50))
insert into #temp values(1,'test','head1')
insert into #temp values(1,'test','head2')
insert into #temp values(1,'test','head3')
insert into #temp values(2,'test1','head1')
insert into #temp values(2,'test1','head2')
Required output
depID Name LocationHead
1test *head1,*head2,*head3
2test1 *head1,*head2
I am trying to replace all special characters in a column with one special character.
Example:
Table: dbo.Employee
Column: Name
Name
-------
edwardneuman!"<]
mikemoreno)'>$:
JeffJensen"?>"
I am trying to get the namepart to the left of ANY special character. To achieve this, I am thinking of replacing all the special characters with a single special character so that I can find the first occurrence of that special character and grab left of the special character (SUBSTRING/CHARINDEX). This way I don't need to loop through all the special characters.
I am expecting the following results:
Name
-------
edwardneuman<<<<
mikemoreno<<<<<
JeffJensen<<<<
in my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').
i tried in my join query
these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')
its taking so much of time how t o solve ?
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
We have a database where many tables have a field that has to be lengthened. In some cases this is a primary key or part of a primary key. The table in question is:-
/****** Object: Table [dbo].[DTb_HWSQueueMonthEnd] Script Date: 09/25/2014 14:05:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[DTb_HWSQueueMonthEnd](
[Code] ....
The script I am using is
DECLARE@Column varchar(100)--The name of the column to change
DECLARE@size varchar(5)--The new size of the column
DECLARE @TSQL varchar(255)--Contains the code to be executed
DECLARE @Object varchar(50)--Holds the name of the table
DECLARE @dropc varchar(255)-- Drop constraint script
[Code] ....
When I the the script I get the error message Could not create constraint. See previous errors.
Looking at the strings I build
ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] DROP CONSTRAINT PK_DTb_HWSQueueMonthEnd
ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] Alter Column [Patient System Number] varchar(10)
ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] ADD CONSTRAINT PK_DTb_HWSQueueMonthEnd PRIMARY KEY NONCLUSTERED ([Patient System Number] ASC,[Episode Number] ASC,[CensusDate] ASC)
WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
They all seem fine except the last one which returns the error
Msg 8111, Level 16, State 1, Line 1
Cannot define PRIMARY KEY constraint on nullable column in table 'DTb_HWSQueueMonthEnd'.
Msg 1750, Level 16, State 0, Line 1
Could not create constraint. See previous errors.
None of the fields I try to create the key on are nullable.
I have a script that loops through a series of tables to send data to a table from each of the tables. My issue is that not all tables have the columns I need in them. What I would like is to replace the column with another column when it does not exist. Something like below
Select Misisng_Column(A.Name, replace with B.Name) as Name
FROM SomeTable A
Cross Join (Select Name FROM AnotherTable) B
AnotherTable has one record in it. To avoid a Cartesian issue. Like I said just an example
In my real script the table aliased as A is from a list of tables in a sys.tables query that loops through to the end.
Writing this code using a CTE or any other method which do not use a table variable or a temp table as the users do not permissions to run this code from the application because of their roles which are required for creating and dropping the temp tables. I replaced table variable in place of Temp tables however the query never completes, probably because of the number of rows.
SELECT A.[Entry No_], A.[G_L Account No_],A.[Gen_ Prod_ Posting Group],A.[Document No_],A.[Posting Date]
INTO temp1
FROM [G_L Entry] as A ,[G_L Account] as B
where A.[G_L Account No_]= B.[No_]
SELECT VE.[Entry No_],VE.[Document No_],VE.[Posting Date],VE.[Gen_ Prod_ Posting Group] , GLILER.[G_L Entry No_]
INTO temp2
[code]....
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I have data like the following:
ID COUNTER DATA
1 10 BLAH
1 20 BLAH
2 10 BLAH
3 10 BLAH
2 20 BLAH
2 30 BLAH
What I want to return is:
1 20 BLAH
2 30 BLAH
3 10 BLAH
I want the top 1, having the highest counter from each ID. This is a highly simplified version of that I am pulling which also is between a date range, but same principle.
IE: SELECT * FROM Table WHERE ID in (SELECT DISTINCT ID FROM Table WHERE Date BETWEEN <date> AND <date>
I'd rather keep it in one statement if possible, but if I have to do it in multiple passes then so be it.
I have a table called TBLCataloghi
I have multiple records with colunms codpro and codcat equal
They differ only by a date called catalog.datfin
I'd like to select all rows but with the same codpro,codcat, obtaining ONLY the row with MIN () field datfin
Field datfin is a date..
Ex. codpro = 'PIPPO'
codcat = 'MK'
DATFIN = 01/01/2010
codpro = 'PIPPO'
codcat = 'MK'
DATFIN = 10/07/2014
I'd like to read both records but in SELECT obtain only the record with datfin MIN (01-10-2010)
I did the query but i was not able to do nothing of good. I obtain all times both records...
SELECT catalog.codpro AS CodProdotto,
catalog.codcat AS CodiceCatalogo,
MIN(catalog.datfin)
FROM pub.catalog
WHERE catalog.codcat = 'MK'
GROUP BY catalog.codpro,catalog.codcat ,catalog.datfin
I keep thinking this can be done in one query:UPDATE H
SET Phone1 = NULL
FROM Dialer.dbo.Agentless_Hold H
INNER JOIN Dialer.dbo.PhoneLookup D ON H.Phone1 = D.Phone;
UPDATE H
SET Phone2 = NULL
[Code] ....
I need to NULL any phone number in the Hold table where the number is in the Lookup table.
I need to update a empty column in our SQL database with the login ID for employees of our company.The table is called SY01200 and were I need to put the login ID is column INET5, and the login ID is just me stripping off the company's email address(removing the @company.com), and I need to update the INET5 column only where Master_Type = 'EMP'
And here is the Query that I am using to strip the email select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp'And here is what I thought the Query would be to update however I got and error saying more than 1 arguement returned
UPDATE sy01200
SET INET5 = (select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp')
WHERE Master_Type = 'EMP'
Here is my setup: I have the following tables -
tblPerson - holds basic person data.
tblPersonHistorical - holds a dated snapshot of the fkPersonId, fkInstitutionId, and fkDepartmentId
tblWebUsers - holds login data specific to a web account, but not every person will have a web account
I want to allow my admins to search for users (persons) with web accounts. They need to be able to search by tblPerson.FirstName, tblPerson.LastName, tblInstitutions.Institution, and tblDepartments.Department. The only way a Person record is joined an Institution or Department record is through many -> many junction table tblPersonHistorical.
People place orders and make decisions in our system. Because people can change institutions and departments, we need an historical snapshot of where they worked at the time they placed an order or made a decision. Of course that means some folks will have multiple historical records. That all works fine.
So when an admin user wants to search for webusers, I only want to return data, if possible, from he most recent/current historical records. This is where I am getting bogged down. When I search for a specific webuser I simply do a TOP 1 and ORDER BY DateCreated DESC. That returns only the current historical record for that person/webuser.
But what if I want to return many different webusers, and only want the TOP 1 historical for each returned?
Straight TOP by itself won't do it.
GROUP BY by itself won't do it.
I need to send multiple emails to recipients one at a time what is the best way to do this?for example i do a select statement to get 5 email addresses, now i need to be able to fire off an email with verbiage to each one of them separately. The reason they have to be separate is in the verbiage i need to have there name in the 'Dear Jondoe1,' Here is my second dilemma. How would you insert a name in the verbiage for each email?
jondoe1@gmail.com
jondoe2@gmail.com
jondoe3@gmail.com
jondoe4@gmail.com
jondoe5@gmail.com
I am working with some old code that we are trying to clean up and perform some performance enhancements. The performance is now, so Very much better. From over 3 minutes to under 2 seconds.
But I am still trying to get the multiple rows into a single row. I would like to place this into a CTE to get the multiples into a single row. I just cannot get my head around how is the best, most efficient way to write the query.
This is a small example of what the rows look like in the resultset, and what I want to single to be.
DECLARE @BillingCorrect TABLE
(
ContractNumber char(10)
, pc1 int
, pb int
, om int
, vp int
[Code] ....
I am not sure how to write the query to have all the data in a single row.
How to get the lowest U.Price along with FX and Rate.
ID-U.Price-FX-Rate
1280 19.1196 EUR 3.85
1280 46.2462 USD 3.63
1280 6.32 RM 1.00
Required output.
ID-U.Price-FX-Rate
1280 6.32 RM 1.00
I have a table that has for example data
I am looking to write a script that will change the first table into the second table.......
Table 1
Account No Name other field
1 Mr T and Mrs M Lambert xxx
I need to rewrite this as
Table 2
Account No split Name other field
1 a Mr T Lambert xxx
1 b Mrs M Lambert xxx
Can you update data from multiple tables in the same UPDATE statement, by joining those tables in a CTE ?
For example, this fails:
DECLARE @UPDCATE_COUNT AS int = 100000;
WITH COMBINED_TABLES AS (
SELECT TOP (@UPDATE_COUNT) T.UpdateID, T.IS_UPDATED, U.[Description]
FROM dbo.Table1 AS U
INNER JOIN dbo.Table2 AS T
[code]....
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1
set weight= d.weight,
stateweight=d.stateweight,
overallweight=d.overallweight
from
(select * from table2)d
where table1.state=d.state and
table1.month=d.month and
table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
I have the following database structure
Stock Depth41 Depth12 Depth34
AAA 1 2 1
BBB 2 2 4
How can I show Each Depth column as seperate row
AAA 1
AAA 2
AAA 1 as follows
I’ve never written a query with multiple APPLY joins before and I’m running into some troubles with my first one. The below SQL statement runs within 10 seconds if I comment out either one of the APPLY joins and its corresponding field columns. However, when I try to execute with both APPLY joins, the query runs indefinitely. The longest I’ve waited before cancelling it is 90 minutes.
Now, I know there are probably other ways I could write this query to get me the results I’m looking for. I’m posting this on the board because I’m curious about finding out why multiple APPLY joins could cause SQL Server to run away. I’m hoping to gain some insight so that I can better understand how APPLY joins work so that in case I have a big need to do this again in the future (without suitable workarounds) I can code it correctly.
Here are some things I’ve tried so far…
1.Changed the States table into a subquery that only returns a single state
2.Change all the references inside the APPLY subqueries so that they had different aliases (just in case they were conflicting with each other).
3.Changed the CROSS applies to OUTER applies. States has 50 records and only 32 have matching permit data so the 18 extra iterations using OUTER APPLY don’t impact performance any when an APPLY is used by itself.
SELECT s.state_name
, COUNT(DISTINCT DUPS.PermitNumber) AS NumOfDupPermits
, SUM(DistinctPermits) AS DistinctPermits
FROM States S
CROSS APPLY (SELECT w.StateID, COUNT(*) as DistinctPermits
[Code] ....
I'm working on a project where I need to retrieve employees data and then combine the data into single row per employee.
Sample Data:
WITH SampleData (PERSON, [DATA], [FIELD]) AS
(
SELECT 1234,'04/02/2014','Date'
UNION ALL SELECT 1234,'123','Department'
UNION ALL SELECT 1234,80.0,'Rate'
)
SELECT *
FROM SampleData;
The results from the above are as follows:
PERSONDATA FIELD
123404/02/2014Date
1234123 Department
123480.0 Rate
The desired results would be:
PERSONDate Department Rate
123404/02/2014 123 80.0
I have 3 tables:
News:
bigint NewId
nvarchar NewTitle
datetime NewDate
nvarchar NewBrief
--------------------------
Category:
int CatId
nvarchar CatName
--------------------------
NewsRelCategory:
bigint Id
int CategoryIdFk
bigint NewsIdFk
--------------------------
I want to select NewId, NewDate and Distinct NewTitle
I tried this but NewTitle doesn't distinct:
SELECT
FROM dbo.Category INNER JOIN
NewsRelCategory ON dbo.Category.CatId = NewsRelCategory.NrcCategoryIdFk INNER JOIN
dbo.News ON NewsRelCategory.NrcNewsIdFk = dbo.News.NewId
I have a case where if the Id field is a specific value, I don't want to allow null in another field, but if the Id value <> a specific value, null is ok.
In the example below, inserting the first record should succeed, the second should succeed, and the 3rd should fail. Right now the 2nd two fail. I gotta be missing something easy, but I can't figure it out.
USE tempdb
GO
IF OBJECT_ID('tempdb.dbo.CheckConstraintTest') IS NOT NULL
DROP TABLE tempdb.dbo.CheckConstraintTest;
CREATE TABLE CheckConstraintTest
[Code] .....
I have a wrapper stored procedure ProcMain_wrapper that executes in one main dataabase and it calls child stored procedure in multiple databases. Does the rollback occur in all the databases if the stored procedure fails in any one of the multiple databases?
create procedure dbo.db_Main.ProcMain_wrapper (
declare @curClientCode as cursor ,@db varchar(10),@dbName varchar(20)
BEGIN TRANSACTION TRAN1
BEGIN TRY
SET @curClientCode = CURSOR FOR
SELECT [name] from sys.databases where name like 'dbclient_%'
[code]....
I have 3 tables: CUSTOMER, SALES_HEADER, SALES_DETAIL and there are no relationships / keys between these tables.
I want to INSERT into SALES_HEADER from CUSTOMER & SALES_DETAIL. Here is the query I used.
insert into sales_header (SALES_ID, CUST_ID, SALES_AMOUNT)
select SALES_DETAIL.sales_id, SUM(SALES_DETAIL.prod_price) as sales_amount, CUSTOMER.CUST_ID
from SALES_DETAIL, CUSTOMER
where SALES_HEADER.sales_id = CUSTOMER.cust_id
group by sales_detail.SALES_ID, CUSTOMER.cust_id;
It shows parsed correctly, but giving error: The multi-part identifier "SALES_HEADER.CUST_ID" could not be bound. How to insert from multiple tables when there are no primary / foreign keys & relationships.
If I have 100 ODBC clients all submitting the following SQL at the same time how do I know that the SQL inside the conditional only gets executed once. It appear SQL Server is preventing it from happening but was curious how. Or do I need to add something to prevent it from happening.
IF NOT EXISTS (SELECT name FROM sysobjects WHERE type='U' AND name = 'mytable)
BEGIN
CREATE table mytable (task int NOT NULL, first_name varchar(128), last_name varchar(128))
END
Better method to detect records with one or more 0's, other than hard coding all of the potential values. For example, I need to detect account duplicates where the duplicate contains multiple/all 0's in the "MasterAccount" column:
DECLARE @Account TABLE(AccountNo varchar(3), MasterAccount varchar(10) )
INSERT INTO @Account
SELECT 'ABC','0000000ABC' UNION
SELECT 'DEF','0000000DEF' UNION
SELECT 'ABC','0000000000' UNION ---- unwanted duplicate
SELECT 'DEF','00000' UNION ---- unwanted duplicate
[Code] ....
Is there a better method than this?
i have a query i.e.
select project, description from table
with results
chocolate | white
chocolate | black
chocolate | brown
sugar | black
vinegar | yellow
i would like to get a result like:
chocolate | white, blakc, brown
sugar | black
vinegar | yellow
so I would like to get all values of one project in one records included with separators/a space in it
I have two tables:
tblServer
tblInstance
tblServer represents a server, tblInstance represents any SQL Server instances present on the server. They're related thru srvID.
I'd like to write a query that gives me servers with all instances, on one row. This dataset will populate a List in an SSRS report.
I have this but it's clunky and does not provide for more than 2 instances on the server. I'd like this to account for any number of instances all on one row without having to hard code multiple joins:
with serverInfo as
(
select
srv.srvType as Type
,srv.srvName as ServerName
,srv.srvIP as ServerIP
,ins.instNetName as InstanceNetName
[Code] .....