T-SQL (SS2K8) :: Specific Column Matching With Nulls
Apr 9, 2015
I'm working on a join between two tables where I only want one row returned... I'm matching on two columns between two tables. One of those columns in the target table could be null. I only want one record returned.
create table #vehicle(id int, vehiclemake varchar(10), vehiclemodel varchar(10), classtype varchar(1))
create table #class(id int, classtype varchar(1), value int)
insert into #vehicle values(1, 'AUDI', 'R8', 'A')
insert into #vehicle values(2, 'AUDI', null, 'B')
insert into #class values(1, 'A', 100)
insert into #class values(2, 'B', 1)
[Code] ....
Using the above example, if VehicleModel is anything other than 'R8' is specified then I want it to return the other class type record.
This is going to be used as a join within a bigger statement, so I'm not sure ordering and returning top 1 is going to work.
View 9 Replies
ADVERTISEMENT
May 20, 2014
We have 2 tables (table a and b)
select a.* from table a inner join table b
on a.col1<> b.col2
I would like to have column names where the values are not matching.
View 4 Replies
View Related
Sep 3, 2014
I have data:
Ticket User Priority
A ME 1
B ME 1
C ME 2
C ME 3
D ME 2
E YOU 2
F YOU 1
G ME 3
H YOU 2
H YOU 3
I ME 1
Essentially if Ticket and User are the same I just want the min priority returned.
SO:
Ticket User Priority
A ME 1
B ME 1
C ME 2
D ME 2
E YOU 2
F YOU 1
G ME 3
H YOU 2
I ME 1
I've tried partition and rank but can't get it to return the right output.
View 5 Replies
View Related
May 20, 2014
Give this data set;
declare @BO table (Col1 varchar(50), Col2 varchar(50))
insert into @BO values
('01','009920140516102116'),
('071710811019600001000005',''),
('070534524264000001000005',''),
('001806505517000001000005',''),
[Code] ....
select * from @BO
The 2 digit number that appears on line 1, 7 and 13 (only in this example) i need to have added to the begin of each value below it until the next 2 digit number is encountered. The desired result set would look like:
declare @BOD table (Col1 varchar(50), Col2 varchar(50), col3 varchar(50))
insert into @BOD values
('01','009920140516102116',''),
('071710811019600001000005','','01071710811019600001000005'),
('070534524264000001000005','','01070534524264000001000005'),
[Code] ....
View 7 Replies
View Related
Mar 28, 2014
I have a DB with some tables and, on certain tables, i've a column named "ID_COMPUTER".
I need to find all the rows where id_computer=<specific_value> from all the tables of my database, when column "ID_COMPUTER" exists.
Pseudo-code would be: select * from db.* where id_computer=<specific_value>
how to write this ?
View 2 Replies
View Related
Dec 4, 2014
I need to insert and update a table. One column of the table needs to conform to a format as: XXXXXXX.XXXXX
If any data is not complying to the format an error needs to be thrown.
How to implement this constraint!
View 3 Replies
View Related
May 30, 2007
Will the fuzzy grouping task match a null value to an empty string (or spaces)? I've got 5 columns I'm matching on, and one of them may be null for certain rows but an empty string for others. Given the 4 other columns may match, will this difference stop similar columns being grouped together?
(Someone's modified my grouped data since it was deduped, which takes a while, and I'm hoping for a quick answer on this).
Thanks in advance.
Ben
View 3 Replies
View Related
May 16, 2006
When i do a select on my emplee table for rows with null idCompany i dont get any records
I then try to modify the table to not allow a null idCompany and i get this error message:
'Employee (aMgmt)' table
- Unable to modify table.
Cannot insert the value NULL into column 'idCompany', table 'D2.aMgmt.Tmp_Employee'; column does not allow nulls. INSERT fails.
The statement has been terminated.
This sux
View 4 Replies
View Related
Aug 22, 2014
This is my code, table and result,
declare @t_JobNoticeID table (cvid int, JobNoticeID int)
insert into @t_JobNoticeID values(2456, 24);
insert into @t_JobNoticeID values(4000, 124);
insert into @t_JobNoticeID values(245, 9);
insert into @t_JobNoticeID values(2456, 19);
insert into @t_JobNoticeID values(4000, 904);
insert into @t_JobNoticeID values(4000, 11);
insert into @t_JobNoticeID values(24, 19);
[Code] ....
My question is -
How update statement looks like compare RESULT A1 with x_JobMatching?
So, my FINAL RESULT shown as follow,
CVIDJobNoticeIDisMatch
1925450
6590690
459130
2456191
4569110
40009041
24560
900240
24191
View 5 Replies
View Related
Apr 28, 2015
I have two tables - one with sales and another with payments against those. The payment may not match the exact amount of sales and I have to use FIFO method to apply payments. The payment month must >= sales month.
How can i write a query to do this? Examples are as below.
Table 1
Sales Sale DateSale Amt
1Jun-141200
2Oct-142400
3Dec-14600
4Feb-1512000
Table 2
Pay Month Pay YearPay Amount
5 2014 300
6 2014 1000
10 2014 500
11 2014 2000
12 2014 300
1 2015 900
create table tbl1
(
saleNo int
,saleDate date
,saleAmt float
)
insert into tbl1 (saleNo, saleDate, saleAmt)
[Code] ....
View 5 Replies
View Related
Jun 12, 2015
Table Clients is master table with all records, joining against Assets table that may or may not have a matching entry.
Trying to sum an asset type against table and no matter what kind of join I do I cannot get SQL to return a NULL match against the Clients ID value. All I get back are matching rows.
Here's the SQL:
select c.cindex,SUM(a.value) AS 'Total Assets' from Clients c
"the join" Assets2012 a on a.clientid=c.cindex
where (c.ClientClass<=7 AND c.ClientClass<>6) AND a.assettype = 2
group by c.cindex
But no matter what type of join I do, left, right, left outer, inner, I am not getting back NULL values for client records that have no matching asset records.
Strange thing is, by removing the "and assettype=2" part I get the whole database back, with NULL's but not the range I'm looking for.
View 2 Replies
View Related
Jul 16, 2015
I've been matching some incoming contacts to existing contacts in a database and need to update, insert, or rematch based on the ifs below.
If name, phone, and email all provided for both, then use the highest Source. So if the Contact has a Source value of 5 and SourceContact has a ContactSource of 1, update Contact with SourceContact
If name, phone and email all provided, and source the same then update to new values.
If name and phone on SourceContact and name and Email on Contact then reset Contact_fk to -1 should not have matched, but should be an insert
If name and email on SourceContact and name and phone on Contact then reset Contact_fk to -1 should not have matched, but should be an insert
If name and phone on SourceContact and name and/or Phone is blank in Contact then update
If name and email on SourceContact and name and/or email is blank in Contact then update
If phone numbers can be different, just update record to SourceContact if it has a same or higher ContactSource
If email address do not match then set SourceContacts to -1 Contact_fk it was computed incorrectly. Both have a non blank email
If Contact_fk is 0 then it is a new contact and just insert it.
IF OBJECT_ID('dbo.SourceContact', 'U') IS NOT NULL DROP TABLE [dbo].[SourceContact];
CREATE TABLE [dbo].[SourceContact]
(
[SourceContact_pk]INT IDENTITY(1,1) NOT NULL CONSTRAINT PK_SourceContact PRIMARY KEY CLUSTERED,
[ContactLastName] VARCHAR(30) NOT NULL CONSTRAINT DF_SourceContact_ContactLastName DEFAULT (''),
[ContactFirstName] VARCHAR(30) NOT NULL CONSTRAINT DF_SourceContact_ContactFirstName DEFAULT (''),
[code]....
View 2 Replies
View Related
May 23, 2015
I need to select specific values from all rows where the value of a specific column is "Active"
This part works: SELECT LastName, FirstName, MiddleInit, ClientId FROM dbo.Client
But I want to add: WHERE StatusType = (Active) and how to do this.
View 4 Replies
View Related
Mar 10, 2014
I have a temperature table with a column that shows the how many hours old a newborn was when his/her temperature was taken.
Example lets say once per hour.
I want to join to a table called Weight that records the newborns weight at any given time.
Example lets say 3x during the day.
1 @ 8:45am
2 @ 11:15am
3 @ 4:30pm
I want to figure out which weight recording is the closest to a given temperature recording and return that one row.
View 2 Replies
View Related
Sep 25, 2015
I have been away from SQL for a couple of months, and for the life of me cannot work out a simple way to do what i want to do.
select bu1.name,bu2.name, bu3.name, bu4.name, bu5.name
from
Sale
INNER JOIN
Sysuser on sale.userid = sysuser.userid
INNER JOIN businessunitBU1
on BU1.Businessunitid = sysuser.businessunitid
left JOIN businessunitBU2
on BU2.Businessunitid = bu1.parentbusinessunitid
left JOIN businessunitBU3
on BU3.Businessunitid = bu2.parentbusinessunitid
left JOIN businessunitBU4
on BU4.Businessunitid = bu3.parentbusinessunitid
left JOIN businessunitBU5
on BU5.Businessunitid = bu4.parentbusinessunitid
So effectively i am trying to go through the hierarchy to find all the levels. Unforunately not every entry has the same amount of levels.
So its coming out like this.....
Bu1 BU2 BU3 BU4 BU5
L5 L4 L3 L2 L1
L4 L3 L2 L1
L3 L2 L1
L5 L4 L3 L2 L1
So whats the easiest way to move everything along to fill in the blanks, but move the blanks to the end - so it would be more like this:
Bu1 BU2 BU3 BU4 BU5
L5 L4 L3 L2 L1
L4 L3 L2 L1
L3 L2 L1
L5 L4 L3 L2 L1
View 8 Replies
View Related
Mar 30, 2015
In Outer join, I would like to add the outer columns that don't exist in the right table for each order number. So currently the columns that don't exist in the right table only appear once for the entire set. How can I go about adding PCity, PState to each order group, so that PCity and PState would be added as null rows to each group of orders?
if OBJECT_ID('tempdb..#left_table') is not null
drop table #left_table;
if OBJECT_ID('tempdb..#right_table') is not null
drop table #right_table;
create table #left_table
[Code]....
View 2 Replies
View Related
Aug 11, 2014
I have a patient record and emergency contact information. I need to find duplicate phone numbers in emergency contact table based on relationship type (RelationType0 between emergency contact and patient. For example, if patient was a child and has mother listed twice with same number, I need to filter these records. The case would be true if there was a father listed, in any cases there should be one father or one mother listed for patient regardless. The link between patient and emergency contact is person_gu. If two siblings linked to same person_gu, there should be still one emergency contact listed.
Below is the schema structure:
Person_Info: PersonID, Person Info contains everyone (patient, vistor, Emergecy contact) First and last names
Patient_Info: PatientID, table contains patient ID and other information
Patient_PersonRelation: Person_ID, patientID, RelationType
Address: Contains address of all person and patient (key PersonID)
Phone: Contains phone # of everyone (key is personID)
The goal to find matching phone for same person based on relationship type (If siblings, then only list one record for parent because the matching phones are not duplicates).
View 9 Replies
View Related
Oct 2, 2014
I have a MySql Database i need to extract data from based on matching info in a local SQL Server database,
I will ultimately need to cycle through 20 of these MySql databases , but the query below is taking 1 minute and 20 plus seconds...Just for one..
Is there a simple tweak that would speed it up?
USE [CAS]
GO
DECLARE @PhoneDB varchar(max),
@SQL NVARCHAR(MAX);
set @PhoneDB = '[PHONEDB_PHI]';
set @SQL = 'SELECT
[Code]....
View 4 Replies
View Related
Apr 3, 2014
I need to know /observe for a period like 10 days in a row HOW MANY TIMES a specific Stored Proc is executed on the server. How can I do that? is there a way to precisely know a number of such calls via DMVs?
View 9 Replies
View Related
Jul 28, 2014
I am trying to create an index for a specific query that is used a lot.
Unfortunately I am keep getting a clustered index scan. (4.6 mil rows)
Googling "AND" and "OR" is tricky, but did lead met to many articles about filtered indexes.
None of which gave me a clear answer.
How can I make an index for this query?
Here's the code setup
------------------------------------------------------------------------------------------
-- Setup
------------------------------------------------------------------------------------------
IF OBJECT_ID('FilterTbl') IS NOT NULL
DROP TABLE FilterTbl
CREATE TABLE FilterTbl
(
SurroIDInt IDENTITY PRIMARY KEY,
CompIDSmallInt,
[code]....
View 3 Replies
View Related
Dec 28, 2014
This is my table:
use tempdb
go
if object_id('Data', 'u') is not null drop table Data
go
with temp as (
select top 10000 row_number() over (order by c1.object_id) Id
from sys.columns c1 cross join sys.columns c2
[code]....
What index would be best for these three queries? With best I mean the execution time, I don't care about additional space.
This is the index I currently use:
create nonclustered index Ix_Data on Data (StateId, PalletId, BoxId, Id)
The execution plan is SELECT (0%) - Stream Aggregate (10%) - Index Scan (90%).
Can this be optimized (maybe to use Index Seek method)?
View 7 Replies
View Related
Mar 23, 2015
I have data like below
Potter, James J
Williams, Ted R
Allen, Gary G
I want to remove Middle Name from the output
Potter, James
Williams, Ted
Allen, Gary
My Query:
SELECT
CASE WHEN CHARINDEX(' ', Supervisor, CHARINDEX(' ', Supervisor, 0) + 1) > 0 THEN
REPLACE(Supervisor, SUBSTRING(Supervisor, CHARINDEX(' ', Supervisor, CHARINDEX(' ', Supervisor, 0) + 1), LEN(Supervisor)), '')
ELSE Supervisor END AS NewSupervisor from data d
However, I stumble when Middle Name exists somewhere in the name as Replace function repalces every occurrence of the string. For ex: "Allen, Gary G" becomes "Allen,ary"
Do we have any way to say sql to replace after certain index?
View 3 Replies
View Related
Sep 16, 2015
I've a table that stores operationcode for each jobnumber. The jobnumber can have multiple operationcode. From the below DDL, I need to show all the jobs that have operation codes as 2001 and 2002. In the below DDL Jobnumber 80011 has both the operation codes 2001 and 2002 so this job will display on the report.
On the other hand Job 80021 only has operationcode 2001 and I do not want this job to show up on the report.
I need to show all the operationcodes for a job if it has operationcode 2001 and 2002.
USE tempdb;
GO
DECLARE @TEST_DATA TABLE
(
DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED
, OperationCodeVARCHAR(10) NOT NULL
, EmployeeCode VARCHAR(10) NOT NULL
[Code] ....
View 9 Replies
View Related
Sep 18, 2015
I need to build a CTE query to find for the same Cabstamp (document) where i have different Origin.
I know that i can build this with a correlated subquery, but i´am curious about using CTE.
I post sample create Script:
create table #temp (Cabstamp varchar(10), account varchar(10),document varchar(15), origin varchar(2), debit numeric(10,2), credit numeric(10,2), datalc datetime)
insert into #temp (Cabstamp,account,Document, origin, debit, credit, datalc)
select 'ADM12345',111,'CMP-01','FO',1000,0, '20150110'
union
select 'ADM12345',112,'CMP-01','FO', 500, 0,'20150110'
union
select 'ADM12345',6811,'CMP-01','DO',0,1500,'20150110'
union
[code]....
View 5 Replies
View Related
Apr 17, 2014
I have a few questions about the following t-sql 2008 r2 sql code listed below that is calling a stored procedure:
DECLARE@return_value int,
@endYear SMALLINT = 2014,
@CustomerID INT = '9999',
@Schedules CHAR(1) = N'C'
EXEC [dbo].[sproom] @endYear
,@CustomerID
,@Schedules
The sql listed above does execute the stored procedure called [dbo].[sproom] successfully and returns all the data all the rows from the stored procedure multiple times. However can you tell me the following:
1. How can I have the stored procedure return distinct rows?
2. I want the stored procedure to return selected columns. I tried using the OUTPUT parameter for some of the columns, but I got the error message, "Procedure or function spHomeroom has too many arguments specified.".
when I change the sql above to:
DECLARE @return_value int,
@endYear SMALLINT = 2014,
@CustomerID INT = '9999',
@Schedules CHAR(1) = N'C',
@CustName varchar(50)
EXEC [dbo].[sproom] @endYear
,@CustomerID
,@Schedules
,@CustName
That is when I get the error message.
A solution might be to change the stored procedure, but I would prefer not to since this is a generic stored procedure that I believe a lot of t-sqls and stored procedures will use.
View 3 Replies
View Related
May 11, 2015
I have a stored procedure that runs every 5 minutes. I have one block in the procedure that will only run if there are records in a temp table. In addition, I would like this block to run only if the current time is between 0 and 5 minutes past the hour or between 30 and 35 minutes past the hour.
Currently, my block looks like this:
IF OBJECT_ID('tempdb..#tmpClosedPOs') IS NOT NULL
BEGIN
I can get the current minutes of the current time by using:
Select DATEPART(MINUTE,GetDate())
I know that it should be simple, but I'm pretty new at Stored Procedures. How do I alter the IF statement to check for the time and only run the block if it's between the times I stated? I started to DECLARE @Minutes INT, but wasn't sure where to go from there.
View 7 Replies
View Related
Nov 4, 2007
Hi,This should be straight forward, but I've searched high and low on the net.I have a FORM which allows me to INSERT data, SQL Server 2005 backend. I populate the all the mandatory fields. But when I click on the Insert button, it won't let me save and says:Column 'PERSONAL_ID' does not allow nullsI'm
using tableadapters, business logic layers etc. and pausing clearly
shows that the values from the form are being passed to the procedure
that I have created "AddNewRecord". And PERSONAL_ID is definitely not
NULL! It fails on Line 971: Me.Rows.Add(row)PERSONAL_ID
is a primary key which I generate. The pause also shows that for
PERSONAL_ID it says " {"Conversion from type 'DBNull' to type 'String'
is not valid."}Function AddNewRecord looks like this:<System.ComponentModel.DataObjectMethodAttribute(System.ComponentModel.DataObjectMethodType.Insert, True)> _
Public Function AddNewRecord(ByVal PERSONAL_ID As String, ByVal SURNAME
As String, ByVal CHRISTIAN_NAME As String, ByVal SEX As String, _
ByVal FAMILY_POSITION As String, ByVal FAMILY_ID As String, ByVal
ADDRESS_1 As String, ByVal ADDRESS_2 As String, _ ByVal ADDRESS_3
As String, ByVal ADDRESS_4 As String, ByVal ADDRESS_5 As String, ByVal
ADDRESS_6 As String, ByVal POSTCODE As String, ByVal COUNTRY As String,
ByVal ORG_ID As String) As Boolean ' create a new details row instance Dim details As New smDetails.smTbl_DetailsIDDataTable Dim detail As smDetails.smTbl_DetailsIDRow = details.NewsmTbl_DetailsIDRow details.AddsmTbl_DetailsIDRow(detail)...my formview code is this: <InsertItemTemplate> PERSONAL_ID: <asp:TextBox ID="PERSONAL_IDTextBox" runat="server" Text='<%# Bind("PERSONAL_ID") %>' AutoPostBack="True" /> <br /> SURNAME: <asp:TextBox ID="SURNAMETextBox" runat="server" Text='<%# Bind("SURNAME") %>' AutoPostBack="True" /> <br /> CHRISTIAN_NAME: <asp:TextBox ID="CHRISTIAN_NAMETextBox" runat="server" Text='<%# Bind("CHRISTIAN_NAME") %>' /> <br /> SEX: <asp:TextBox ID="SEXTextBox" runat="server" Text='<%# Bind("SEX") %>' /> <br /> FAMILY_POSITION: <asp:TextBox ID="FAMILY_POSITIONTextBox" runat="server" Text='<%# Bind("FAMILY_POSITION") %>' /> <br /> FAMILY_ID: <asp:TextBox ID="FAMILY_IDTextBox" runat="server" Text='<%# Bind("FAMILY_ID") %>' /> <br /> ADDRESS_1: <asp:TextBox ID="ADDRESS_1TextBox" runat="server" Text='<%# Bind("ADDRESS_1") %>' /> <br /> ADDRESS_2: <asp:TextBox ID="ADDRESS_2TextBox" runat="server" Text='<%# Bind("ADDRESS_2") %>' /> <br /> ADDRESS_3: <asp:TextBox ID="ADDRESS_3TextBox" runat="server" Text='<%# Bind("ADDRESS_3") %>' /> <br /> ADDRESS_4: <asp:TextBox ID="ADDRESS_4TextBox" runat="server" Text='<%# Bind("ADDRESS_4") %>' /> <br /> ADDRESS_5: <asp:TextBox ID="ADDRESS_5TextBox" runat="server" Text='<%# Bind("ADDRESS_5") %>' /> <br /> ADDRESS_6: <asp:TextBox ID="ADDRESS_6TextBox" runat="server" Text='<%# Bind("ADDRESS_6") %>' /> <br /> POSTCODE: <asp:TextBox ID="POSTCODETextBox" runat="server" Text='<%# Bind("POSTCODE") %>' /> <br /> COUNTRY: <asp:TextBox ID="COUNTRYTextBox" runat="server" Text='<%# Bind("COUNTRY") %>' /> <br /> ORG_ID: <asp:TextBox ID="ORG_IDTextBox" runat="server" Text='<%# Bind("ORG_ID") %>' /> <br /> <asp:LinkButton ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert" Text="Insert" /> <asp:LinkButton ID="InsertCancelButton" runat="server" CausesValidation="False" CommandName="Cancel" Text="Cancel" /> </InsertItemTemplate> Any pointers in the right direction would be appreciated. Thanks in advanceTushar
View 3 Replies
View Related
Apr 25, 2008
Hello, all.
I am new to SQL querying and I came across an issue while experimenting.
Say, I have two tables like the following, a Users table at the top, and a Roles table at the bottom (drawing the issue as I'm not fluent in English to explain):
(Users table)
UserId | RoleId | RoleOldId
-------+--------+----------
1......|x.......|11........
2......|y.......|22........
3......|z.......|22........
(Roles table)
RoleId | RoleOldId | RoleName
-------+-----------+-------------
10.....|11.........|Anonymous....
20.....|22.........|Superuser....
30.....|33.........|Administrator
The Roles table was changed to include a new column Roles.RoleId and the old column is named Roles.RoleOldId. Same is done for Users table.
Assume these are not foreign and/or primary keys. How can I fill Users.RoleId with new Roles.RoleIds, matching RoleOldIds at each tables? The resulting (x, y, z) set of Users table will be (10, 20, 20).
Thank you for your time.
View 3 Replies
View Related
Mar 22, 2008
I need to write a statement that returns the name, city, and state of each vendor that’s located in a unique city and state. In other words, I can not include vendors that have a city and state in common with another vendor.
Any help?
Thanks.
View 2 Replies
View Related
Nov 18, 2005
I have a table that stores part numbers and manufactuers. Somehow this table has become corrupt showing different manufacturers with the same part numbers.
I know this will take a bit of manual digging to fix, but I want to find a way to pull all rows that have the same part number that have different manufacturers, or just pull up any "duplicate" part numbers and I can determine what is right or wrong as far as the manufactuers and make those changes.
I have tried this, but it does not seem to want to work.
Code:
Select * from my_table
Where partnumber = (select partnumber from my_table) and compName <> (select compName from my_table)
I have tried other variations of the same, but nothing seems to want to show me just the items that have the same part numnbers and different manufacturers. I do not care if there are duplicates of the same part number/manufacturer entries, just if the part number is duplicated where the manufacturers are not the same.
These are the rows I want to edit and group by part number. I have almost a million rows of entries and this is not something I want to go through row by row. :-P
Any ideas?
View 2 Replies
View Related
Feb 26, 2014
From standard SELECT need to display specific column values normally, together with any NULLs in the same column not as NULL. My below effort parses however does not change to <new_value>.
SELECT[Server],
[db_name],
(CASE WHEN last_db_bkup_date IS NULL THEN '<new_value>' ELSE last_db_bkup_date END) AS last_bkup_date, [Backup Age (Hours)]
FROM [tbl]
View 5 Replies
View Related
Apr 2, 2015
I have tables in my database, tblNames1, tblNames2, tblNames3, and a main addresses table (currently empty). Once I've imported the address data I need to match the addressIDs in the names tables to the Primary ID in the address table based on the values of a field CompanyName (which is common to all the tables) My issue is that I have a huge CSV file with the master address information but obviously SQL server needs to assign foreign keys so the names tables can linked to corresponding rows in address table. It's a a many to 1 relationship as their will be one address with multiple name entries. All the names are normalized so everything can be matched up...
View 9 Replies
View Related
Jul 31, 2015
I need a script which will tell me Table name and column name where a given text is matching.
Example: search string = "I want to search something"
Output: Table T1 , Column C3.
DB: Microsoft SQL Server 2005 / 2008
View 1 Replies
View Related
