T-SQL (SS2K8) :: Updating Statement Depending On 2 Fields
Sep 30, 2015
I need to build an update query for all my article beginning with '0.%' for my varchar field refkey, but depending on some conditions.
For example.
Case st.base <> '' and st.qttbase <> 0
Theo refkey = B
Case st.cos <>'' and st.qttcos <> 0
Then refkey = C
Case st.refo <> '' and st.qttrefo <> 0
Then refkey = R
But my problem are That i can have Many combination on refkey, for example:
B,BC,BCR,C,CB,CBR,R...and so on.
Also i need to separate the letters with comma, like:
In a package we have statements pointing to 2(or more) different databases on the server. When moving between environments, is there an easy way to change statements like:
UPDATE t1 SET t1.name = t2.name, t1.age = t2.age FROM DB1..Person t1 INNER JOIN DB2..PersonToo t2 ON t1.PersonID = t2.PersonID
I can think only of building the statements replacing the database names with variables, but that's not an easy way. I do not know how to use package variables in this situation. 1 way of doing this may be by using a Lookup or Conditional Split and use the resulting dataflow in a SP or such to update, using parameters... It all sounds very messy, and I still don't know how Any ideas?
How can I update each record in a table, based on a value in another tablewith a single SQL statement?For example, suppose I have the following two tables:Table1Name Something Color-----------------------------------------John GHAS BlueJohn DDSS BlueJohn EESS BluePaul xxxx RedRingo HJKS RedRingo FFFS RedSara hjkd PurpleSara TTHE PurpleJimi sdkjls GreenTable2Name Color------------------------John ?Paul ?Ringo ?Sara ?Jimi ?How can I update the color field in table 2 to correspond with the colorfield in table1 (so I can normalize the db and delete the color field fromtable1)?I know I could open table2 and loop through within my app; just wonderingabout a single SQL statement that would do it. I need a similar technique inother places as part of my app.Thanks,Calan
I am trying to update text fields where the field only has the value"closed." So a field that has closed and anything else will not beupdated.update dbo.Histset dbo.Hist.Notes = ''FROM dbo.HistWHERE (Notes LIKE 'closed_')update dbo.Histset dbo.Hist.Notes = ''FROM dbo.HistWHERE (Notes LIKE 'closed%') and len(convert(varchar(7000),notes)) = 7Neither code works and i get this error: "Subquery returned more than1 value. This is not permitted when the subquery follows =, !=, <, <=, >, >= or when the subquery is used as an expression.The statement has been terminated."What's another way to make the update?
My client wants to minimize concurrency issues by only updating fields that the user actually changed. Whereas most update stored procedures I have created just updated all of the fields WHERE key=value, they want to update individual fields.
What I came up with so far does not look very efficient and I was wondering if anyone has suggestions for improvement.
I have a table where one of the fields contains XML as in the following. Is there an SQL update statement that can change any occurrences of timezoneIdfrom 0 to 1, and timezone from America/New_York to America/Chicago and time to time - 1 hour?
I need to update a empty column in our SQL database with the login ID for employees of our company.The table is called SY01200 and were I need to put the login ID is column INET5, and the login ID is just me stripping off the company's email address(removing the @company.com), and I need to update the INET5 column only where Master_Type = 'EMP'
And here is the Query that I am using to strip the email select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp'And here is what I thought the Query would be to update however I got and error saying more than 1 arguement returned
UPDATE sy01200 SET INET5 = (select LEFT(convert(varchar(40),EmailToAddress),LEN(convert(varchar(40),EmailToAddress))-14) As LoginName from sy01200 where Master_Type = 'emp') WHERE Master_Type = 'EMP'
I need to update the ilocationid from Table 1 to all Table 2 records related to Table 1but there is no direct relation from Table 1 to Table 2. I needed Table 3 to make the connection from Table 1 to 2.
1. Copy old data from each table in LiveDB to same table in ArchiveDB. 2. Delete the data from each table in LiveDB which is in ArchiveDB
Both DBs SIMPLE recovery mode.
Each table has a clustered PK on a single int value. In both DBs
The tables with varchar(max) columns are taking a v.long time to copy over.
IS there anything I can change in the ArchiveDB to make it run faster.
It is the insert that is taking the time. I've tried dropping the clustered PKs in ArchiveDB tables and then rebuilding afterwards but it has not made any difference. After all I am adding data to the ArchiveDB in clustered index order, so wouldn't have expected it to.
How I can change the Archive DB but cannot touch the schema/settings of Live DB.
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
I'm writing a query that will be used in Jasper Ireports, but prefer to have the values done ahead of time using SQL rather than relying on the report to do the lifting.The fields are pretty straight forward, only the display is where I have a question.
Fields Used: PERIOD ('MON-yyyy') and VALUE
The results must start with the CURRENT PERIOD (AUG-2014) in one column and the VALUE for the current period multiplied by 1/12 (VALUE*(1/12)).The next column should return the VALUE for CURRENT PERIOD - 1 (JUL-2014) and multiply by 2/12 (VALUE*(2/12))
This should continue for the last 11 months and would end with OCT-2013 with the value being multiplied (VALUE*(11/12)).Is the easiest solution to this a CASE statement looking at PERIOD then PERIOD minus one month, minus two months...etc?
I have the following result set but I want to stack or transpose the 3 fields into a single column. I may add more fields later, but right now I want to know what's the best and simplest way.
I need to retrieve the pts from table #test1 based on the fields when mapped..
Name & Type columns should match ..Based on the data below the output should be
id NameTypeCode CityIType BPS 1EGFN432 HY F2 10 2 EG FN 432 ON F1 20 3 EG FN 433 On F1 30
It has order of priority to get points
1.When all of the field matches then get the respective pts . 2.When name and Type matched and rest fields doesnt match but is null in #test2 table then retrieve those pts
--drop table #test --drop table #test1 Create table #test ( id int identity(1,1) not null, Name varchar(100) NULL,
How to identify different fields with in a group of records?
Example: create table #test (ID int, Text varchar(10)) insert into #test select 1, 'ab' union all select 1, 'ab'
[Code] ...
I want to show additional field as Matched as ID 1 has same Text field on both the records, and for the ID 2 I want to show Unmatched as the Text fields are different but with the same ID.
I can't get my form to update my db. Is there something wrong with the update statement? I'm not getting any errors either. I have two check Box Lists: Dim strStep1 As String = ""Dim s As ListItemFor Each s In cblStep1.ItemsIf s.Selected ThenstrStep1 += s.Text + ", "End IfNext Dim strStep2 As String = ""Dim s2 As ListItemFor Each s2 In cblStep2.ItemsIf s2.Selected ThenstrStep2 += s2.Text + ", "End IfNext Dim ConnString As String = ConfigurationManager.AppSettings("ConnectionString")Dim Conn As New SqlConnection(ConnString)Dim CommandString As String = "UPDATE [tblAccess] SET [complete1] = ?, [complete2] = ?" & _"WHERE empName = @empName" Dim Command As New SqlCommand(ConnString, Conn)Command.Parameters.AddWithValue("complete1", strStep1)Command.Parameters.AddWithValue("complete2", strStep2) Any help is appreciated!
TRUNCATE TABLE [Temp_Export]; INSERT INTO [Temp_Export] (
[Code]....
The issue I'm having is that I am getting more records in the VIEW than records updated. What can explain such a discrepancy? I am updating the records based on the PK/FK Temp_Import_ID column, which exists in both tables. where the view would yield more records than those matched by the update statement?
INNER JOIN qryPRDGroupDets on Prdct.ProdGrp=qryPRDGroupDets.PGCode
where supersed ='' And OrigPr Not Like '9%' And OrigPr Not Like '%MDM%' And LISTPR1>'0' And STANCOST>'0'
Which works fine, but what I need to do is reference the "OrigPr" field and mark it as "valid" or "Invalid", the "OrigPr" the field contains alpha numeric data e.g. A000, A001, A002 - ZZ99 and so on, amongst all of the potential different types of codes we have codes that end in treble Zero (0) e.g. A000 which are valid, but if they end in double 00 e.g. AA00 then this is invalid, the problem I have is I can't just add
Code: 'Marker'= Case When Right(OrigPr, 2) = '00' Then 'Invalid' ELSE 'Valid' End
For it will mark the A000 as invalid, is there a way of getting around this...
I have a query that I need a hand on. I am trying to add togther somefiends based on values of another.What I would like to add a billing total by saying more or less thefollowing:SELECT labor_hours, labor_cost, expidite_fee, flat_rate,include_repair_cost, include_cal, include_flat_rate, include_parts,cur_bill,(labor_hours * labor_cost) AS labor_total,(ISNULL((SELECT TOP 1 cal_cost FROM calID WHERE orderID=79559 ORDER BYdateCAL DESC),0)) AS cal_total,(ISNULL((SELECT SUM((qty * cost) + premium_charge) AS gptotal FROMrepair_partsID WHERE orderID=79559),0) +ISNULL((SELECT SUM(qty_needed * cust_cost) AS gnptotal FROMmisc_part_assocID WHERE orderID=79559),0)) AS parts_total,((labor_hours * labor_cost) + expidite_fee + flat_rate +ISNULL((SELECT TOP 1 cal_cost FROM calID WHERE orderID=79559 ORDER BYdateCAL DESC),0) +ISNULL((SELECT SUM((qty * cost) + premium_charge) AS gptotal FROMrepair_partsID WHERE orderID=79559),0) +ISNULL((SELECT SUM(qty_needed * cust_cost) AS gnptotal FROMmisc_part_assocID WHERE orderID=79559),0)) AS actual_total,(expidite_feeIF include_repair_cost = 1+ (labor_hours * labor_cost)IF include_flat_rate = 1+ flat_rateIF include_cal = 1+ ISNULL((SELECT TOP 1 cal_cost FROM calID WHERE orderID=79559 ORDERBY dateCAL DESC),0)IF include_parts = 1+ ISNULL((SELECT SUM((qty * cost) + premium_charge) AS gptotal FROMrepair_partsID WHERE orderID=79559),0) +ISNULL((SELECT SUM(qty_needed * cust_cost) AS gnptotal FROMmisc_part_assocID WHERE orderID=79559),0)) AS billing_totalFROM view_inventoryWHERE orderID=79559I know the IF part is whacked, that's where I need the help. Is thistype of thing even possible? Or even efficent? Is it wise to subqueryfor totals (not like I have a choice based on the applicationrequirements)? help.
I have a single update statement that updates the same column multipletimes in the same update statement. Basically i have a column thatlooks like .1.2.3.4. which are id references that need to be updatedwhen a group of items is copied. I can successfully do this withcursors, but am experimenting with a way to do it with a single updatestatement.I have verified that each row being returned to the Update statement(in an Update..From) is correct, but that after the first update to acolumn, the next row that does an update to that same row/column combois not using the updated data from the first update to that column.Does anybody know of a switch or setting that can make this work, or doI need to stick with the cursors?Schema detail:if exists( select * from sysobjects where id = object_id('dbo.ScheduleTask') and type = 'U')drop table dbo.ScheduleTaskgocreate table dbo.ScheduleTask (Id int not null identity(1,1),IdHierarchy varchar(200) not null,CopyTaskId int null,constraint PK_ScheduleTask primary key nonclustered (Id))goUpdate query:Update ScheduleTask SetScheduleTask.IdHierarchy = Replace(ScheduleTask.IdHierarchy, '.' +CAST(TaskCopyData.CopyTaskId as varchar) + '.', '.' +CAST(TaskCopyData.Id as varchar) + '.')FromScheduleTaskINNER JOIN ScheduleTask as TaskCopyData ONScheduleTask.CopyTaskId IS NOT NULL ANDTaskCopyData.CopyTaskId IS NOT NULL ANDcharindex('.' + CAST(TaskCopyData.CopyTaskId as varchar) + '.',ScheduleTask.IdHierarchy) > 0Query used to verify that data going into update is correct:selectScheduleTask.Id, TaskCopyData.Id, ScheduleTask.IdHierarchy, '.' +CAST(TaskCopyData.CopyTaskId as varchar) + '.', '.' +CAST(TaskCopyData.Id as varchar) + '.'FromScheduleTaskINNER JOIN ScheduleTask as TaskCopyData ONScheduleTask.CopyTaskId IS NOT NULL ANDTaskCopyData.CopyTaskId IS NOT NULL ANDcharindex('.' + CAST(TaskCopyData.CopyTaskId as varchar) + '.',ScheduleTask.IdHierarchy) > 0
The data I have has a 1 in for each Yes answer and a 2 for each no answer. I just want the select statement to show the word yes when there's a 1 and the word no when there's a 2. I don't need to update or change the database. Could anyone lead me in the right direction here? Thanks
Hi,Is there a way to exclude fields in a query other than just includingthe ones you want. If there are 20 fields and you want to see all but3, it would be a lot easier to exclude the 3.Thanks
I thought this was working, but apparently it was not. I was wondering how I would create a SELECT Statement for values that are blank (Equal to ""). I really could have swore that this was working, but I guess it wasn't.
// create an open the connection OleDbConnection conn = new OleDbConnection(conString); OleDbCommand command = new OleDbCommand(); command = conn.CreateCommand();
// create the DataSet DataSet ds = new DataSet();
// run the query command.CommandText = "SELECT ID AS [#], Company AS [Company], FName AS [First Name], LName AS [Last Name], Type AS [Type] FROM Table1 WHERE Tags = @P0;"; OleDbDataAdapter adapter = new OleDbDataAdapter(); adapter = new OleDbDataAdapter(command); command.Parameters.Add("@P0", OleDbType.VarChar).Value = ""; adapter.Fill(ds);
// close the connection conn.Close();
bindingSource1.DataSource = ds.Tables[0];
DataGridView.DataSource = bindingSource1;
// set the size of the dataGridView Columns this.DataGridView.Columns[0].Visible = false; this.DataGridView.Columns[1].Width = 234; this.DataGridView.Columns[2].Width = 50; this.DataGridView.Columns[3].Width = 50; this.DataGridView.Columns[4].Width = 75;
//Sort on the Title Column DataGridViewColumn sortColumn = DataGridView.Columns[1]; ListSortDirection direction; direction = ListSortDirection.Ascending; DataGridView.Sort(sortColumn, direction);
//Set the Selected Property of the First Row to False DataGridView.Rows[0].Selected = false; } catch { }
I have someone telling me that I should have put my AND statement in the join instead of the where part, so is there a difference in the where I put it. Is there a difference in the results in any way between the two here in the results in anyway?
Example: Given a query: But let’s take a simple one here:
Query(1) Select ct1.Name, ct1.address, ct1.city, ct1.state, ct1.zipcode From cutTableA ct1 Left join cutTableA ct2 On ct1.ID = ct2.ID Where ct1.zipcode = '14124' AND ct1.Name = 'Bob'
Query(2) Select ct1.Name, ct1.address, ct1.city, ct1.state, ct1.zipcode From cutTableA ct1 Left join cutTableA ct2 On ct1.ID = ct2.ID AND ct1.zipcode = '14124' Where ct1.Name = 'Bob'
I am running a DTS Package.I have a temp table with 1494 records. I am inserting a 'Y' or'N'into a temp table #HasClaims.The TempTable name with the Provider Id's(PRPR_ID) is#TempFACETSNODupesThe @identityID is an identity field counting back from 1494 to 1I count back from the Max value of the identityid (1494) in the Whileloop until I get through all the records. The idea is to check for theexistance of a claims and authorization record and put a 'Y' or 'N'record in the temptable #HasClaims.This is running in the Execute SQL Task object of the DTS Package.The Package runs successfully but only inserts 200 rows into the newtemp table. There should be a row for each provider. Each time itruns, the number of rows it returns is different. Sometimes it is 205,then 185, then 210, before it completes the DTS package.Has anyone run into While looping problems within an Execute SQL taskin a DTS package(SQL 2000)like this--------------------------------------------------------------SELECT @identityID = MAX(IDENTITYID) FROM #TempFACETSNODupesWhile @identityID >= 1BEGIN@PRPRID is the placeholder for the PRPR_ID (Provider)SELECT @PRPRID = PRPR_ID FROM #TempFACETSNODupes WHERE IDENTITYID =@identityIDIF exists( SELECT CLCL_ID FROM dbo.CMC_CLCL_CLAIM CLCL WHERECLCL.PRPR_ID = @PRPRID)BEGININSERT INTO #HasClaims (PRPR_ID, HasClaims, IdentityID)VALUES( @PRPRID, 'Y', @identityID)ENDELSE INSERT INTO #HasClaims (PRPR_ID, HasClaims, IdentityID)VALUES( @PRPRID, 'N', @identityID)------------------------------------------------------------SELECT @identityID = @identityID - 1END
I am working on a project in which a customer wants to be able to list and search their inventory and display the items in a table/grid on a web page.Each item in their inventory has a set of properties - for example, manufacturer, price, serial number, name, etc. The complicated part is that they want an admin to be able to modify/add/delete the set of properties. So for example, they could add the attribute "size." Given that, I think what is needed is 3 tables - one to store the set of properties schema, one for the items, and one to store the actual properties for each item. I know i COULD use alter table statements to add and delete columns, but that doesn't seem like the "right" solution.I would like to be able to write a query such that each row returns the item and all its properties - then i can easily bind to a datagrid. However, what would the query be to do this? I also need to be able to allow the customer to query for items with certain properties - i imagine the sql for that to be similar to this:SELECT * FROM items d WHERE d.Id IN(SELECT a.ItemId FROM attributes a WHERE a.Name = "Manufacturer" AND a.Value = "Samsung") AND d.Id IN(SELECT a.ItemId FROM attributes a WHERE a.Name = "SerialNumber" AND a.Value = "3223")
