T-SQL (SS2K8) :: Varbinary (max) Parameters In Nested Stored Procedures By Value Or Reference
Sep 15, 2014
Consider a situation where a stored procedure taking a varbinary(max) (BLOB) input parameter then calls a nested stored procedure and passes along that varbinary(max) as an input parameter to the nested stored procedure.
Is a copy of the BLOB provided to the nested stored procedure (passed by value) OR is the BLOB passed by reference.
My interest is in understanding the potential memory hit when handling large BLOBs in this environment.
For example, if the BLOB is 200MB, will SQL server need to allocate memory for a new copy each time it's passed to another stored procedure?
Looks like table type parameters are passed by reference, but I haven't been able to find any info on BLOBS in this context.
View 8 Replies
ADVERTISEMENT
Oct 21, 2014
I have several tables a varbinary column in a database. They have names like CSB_BLOB or OBJECT_BLOB. Now I am having intermittent success with getting the data out.
For example this query returns readable text from this data.
0x46726F6D3A20226465616E6E6167726.....etc --data as stored in the column
SELECT CAST(CSB_BLOB AS VARCHAR(MAX)) AS 'Message' FROM OBJECT_BLOB
However this column has the following query results.
0x0001000000FFFFFFFF01000000000000000C....etc. --data as stored in column
--this query returns empty result
SELECT (CSB_BLOB AS VARCHAR(MAX)) AS 'Message' FROM CSB_STATUS_LOG
--this query returns no change???
SELECT CONVERT(VARCHAR(MAX), CONVERT(VARBINARY(MAX), CSB_BLOB, 2), 2) FROM CSB_STATUS_LOG
0001000000FFFFFFFF01000000000000000C....etc
Obviously there is a difference between the two but I am not educated enough to interpret this difference. What do I need to learn / read so I can look at the data in one of these BLOB columns and know how to convert it to something meaningful?
Something like:
1. Try to cast as varchar to see if it is text.
2. Turn into a byte array and see if it is a jpg
3. Turn into a byte array and see if it is a pdf
4. Convert it to hex and then cast as varchar
5. etc....
View 3 Replies
View Related
Nov 25, 2001
I cannot seem to get nesting of stored procedures to work. I must have the syntax wrong. Should the following work:
SELECT *
FROM spWod_rptWoStatusSummary
Where spWod_rptWoStatusSummary is a Stored Procedure.
The above does not work. I get an error telling me that spWod_rptWoStatusSummary is an object that does not exit.
Does anyone know what the correct syntax is?
View 1 Replies
View Related
Nov 25, 2001
I cannot seem to get nesting of stored procedures to work. I must have the syntax wrong. Should the following work:
SELECT *
FROM spWod_rptWoStatusSummary
(Where spWod_rptWoStatusSummary is a Stored Procedure).
The above does not work. I get an error telling me that spWod_rptWoStatusSummary is an object that does not exit.
Does anyone know what the correct syntax is?
View 1 Replies
View Related
Dec 5, 2005
Hi Out There
The attempt to create the following stored procedure, which is supposed to call the previously created stored procedures inside it,
causes the following errors.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferIDTwo'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferIDThree'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferID'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferID'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferID'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferID'.
Create Procedure spPrepareOfferSimulation
@OfferIDOne int
As
exec spPopulateOfferTables @OfferID
go
exec spPopulateOfferProduct @OfferID
go
exec spPopulateOfferDictionary @OfferID
go
exec spPopulateOfferCondition @OfferID
go
exec spPopulateOfferError @OfferID
go
exec spPopulateOfferLimit @OfferID
go
exec spPopulateOfferQA @OfferID
go
Can someone provide me with some productive input to fix this mess?
View 10 Replies
View Related
Apr 14, 2008
I have a caller stored procedure (sp_A) which calls several stored procedures (sp_1,sp_2,sp_3,sp_4, sp_5)
The statements in the called stored procedures sp_1 to sp_5 are all contained within BEGIN TRY -- BEGIN TRAN and BEGIN CATCH blocks which ensure that any errors in the SQL statements are rolled back when an error occurs.
However, I have noticed that when the called stored procedure fails, the caller procedure does not fail Rather it continues processing the remaining sps. I want to add code in my calling sp to stop this fom happening. Any ideas?
I have used this statement within my calling sp but no joy yet.
set @ErrCode = 0
exec @ErrCode = sp_executesql @Sql
if @ErrCode <> 0
begin
return 1
end
Any one with ideas? Thanks
View 12 Replies
View Related
Sep 28, 2007
I need the output of a stored procedure in another SP. That's simple (using a temporary table). But there's a small (big error ) problem.
Since I have to manually define the temporary table with it's fields and datatype to recieve the output from the nested SP , this approach would fail if, in the future more parameters are required to be returned . Is it possible to immunise my SP to such a consequence at creation time, rather them having to amend the temporary table later ?
Any idea how to overcome the above problem ? Is there a way that the temporary table can be automatically created like we have in a SQL statement with the INTO keyword. Any ideas ?
Thanks,
Alec
View 9 Replies
View Related
Apr 30, 2008
I have a stored procedure that returns a scalar value and I want to use that value (among other places) within another stored procedure.
-- The general purpose stored procedure is far too long to include here but I've included the last several lines of code at the bottom to show general gist of it and how it exits.--
The only way I can find to use that returned value "criteria" in a stored procedure is to define a temporary table, INSERT it into the table and then extract it from the temprary table into the variable where I actually wanted it.... i.e.
DECLARE @CriteriaTable TABLE ( Criteria VARCHAR(8000) )INSERT INTO @CriteriaTable (Criteria) EXEC psp_WRP_DisplayCriteria @UserID, 'Dealers, Prefix, Serial Range, Models, Makes, Sold Date', @UserGroup SELECT @Criteria=Criteria FROM @CriteriaTable
This seems like a ridiculously long winded and confusing way of doing things, especially since Im doing it in a dozen different procedures, half a dozen reports and 1 (so fasr) asp.net/VB web site - and I can't help thinking there must be a better way using just one or even zero extra lines of code to do this.
e.g. SELECT@Criteria = (EXEC dbo.psp etc...)
... or some variation thereof with the correct syntax.
or even better going to where that variable is used and changing ...
EXEC dbo.[psp_InsertWarrantyReportTracking]
@UserID = @UserID ,
@ReportName = 'rptChassisTrackExtdWarranty', -- <------
@ReportCriteria = @Criteria
to ...
EXEC dbo.[psp_InsertWarrantyReportTracking] @UserID = @UserID , @ReportName = 'rptChassisTrackExtdWarranty', -- <------ @ReportCriteria = (EXEC dbo.psp_ etc...)... or some variation thereof with the correct syntax.
But no matter how I try and how I search I can't find any way other than in what is otherwise a completely supefluous temporary table.
Am I missing something or is that REALLY the only way to get a hold of that returned value?
------ Last portion of the general purpose routine I'm trying to call ---------------------If Patindex('%RO Audit%',@Parmlist) > 0
Begin
set @Criteria = @Criteria + '- RO Audit date'
select @All=ROAuditAll, @From = ROAuditFrom, @To = ROAuditTo
from dbo.tblWRParameters where @UserID = UserName
If @All = 1
set @Criteria = @Criteria + '- ALL' + @NL
else
set @Criteria = @Criteria + 'is between ' + rtrim(@From) + ' and ' + rtrim(@to) + @NL
END
--Return the combined parameter field
select @Criteria as Criteria
END
View 12 Replies
View Related
Mar 22, 2001
Has anyone faced problems in calling one stored procedure from within another stored procedure ? I am considering using nested SPs, and would appreciate any inputs on it.
Thks,
SC
View 2 Replies
View Related
Sep 11, 2014
We have a stored procedure that makes a decision to pull records from one of two servers.
If one of these servers became unavailable but was no longer queried would the stored procedure still work? Doesn't SQL recompile stored procedures periodically?
Something like this:
If @ServerAIsDown=1
begin
select * from ServerB.dbo.MyTable
end
else
begin
select * from ServerA.dbo.MyTable
end
View 2 Replies
View Related
Mar 21, 2008
I have nested a Stored Procedure within a stored procedure. The nested stored procedure ends in a select statement. What I'd like to do is either capture the results of the select statement (it will be 1 row with 3 columns, I only need the contents of first column), or suppress the select statement from displaying in the final results of the Stored Procedure it is nested in.
Is there any way to do either of those?
View 1 Replies
View Related
Jan 7, 2008
For every trigger and stored procedure I have a try-catch that writes to an error_log table.
The problem is the inner error is not preserved, always get:
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.
As seen below - though commented out:
I tried commiting any transactions - though I didn't create one.
I played with the
XACT_STATE though that was 0
My test case was last procedure has 1/0
Thanks,
Russ
-----------------------------------------------------------
Below is what I have
Step 1)
ALTER Trigger [trg_ActivityLogEntryReportsError] ON [dbo].[ActivityLog]
FOR INSERT AS
DECLARE @ActivityLogID int
,@AlertMessageTypeID int
,@comment nvarchar(max)
,@Error_Source nvarchar(max)
--- etc.
SELECT
@ActivityLogID = ActivityLogID
,@AlertMessageTypeID = AlertMessageTypeID
,@Comment = Comment
FROM INSERTED
BEGIN TRY
if @AlertMessageTypeID = 2 -- activity reported an error
begin
exec proc_CreateAlertLogEntry_forError
@ActivityLogID
,@Comment
update ActivityLog
set flgActivityChecked = 1
where @activityLogId = activityLogID
end
END TRY
BEGIN CATCH
select
@Error_Source = 'trg_ActivityLogEntryReportsError '
,@Error_Procedure = ERROR_Procedure()
--- etc.
INSERT INTO ERROR_LOG
( Error_Source
,Error_Procedure
,Error_Message
--- etc.
)
VALUES
(
@Error_Source
,@Error_Procedure
,@Error_Message
---etc.
,@Error_Comment )
-- if @@TRANCOUNT > 0
--begin
--commit
--end
END CATCH
Step 2)
/*
This will be called by a Trigger
*/
ALTER Procedure [dbo].[proc_CreateAlertLogEntry_forError]
(@ActivityLogID int
,@Comment nvarchar(max))
AS
Declare
@ProcessScheduleID int
,@ProcessID int
--,@comment nvarchar(max)
,@Error_Source nvarchar(max)
---etc
BEGIN TRY
insert into AlertLog
(
AlertMessageTypeID
,comment
,ActivityLogID
)
values
(
2 -- error
,@comment
,@ActivityLogID
)
end
END TRY
BEGIN CATCH
PRINT 'ERROR OCCURED'
PRINT ERROR_Procedure() + ' ' + ERROR_MESSAGE()
select
@Error_Source = 'proc_CreateAlertLogEntry_forError '
---etc.
INSERT INTO ERROR_LOG
( Error_Source
,Error_Procedure
,Error_Message
---etc.
)
VALUES
(
@Error_Source
,@Error_Procedure
,@Error_Message
--- etc.)
-- if @@TRANCOUNT > 0
--begin
--commit
--end
END CATCH
update ActivityLog
set
flgActivityChecked = 1
,UpdatedDate = getdate()
,UpdatedBy = suser_sname()
where
ActivityLogID = @ActivityLogID
STEP 3
ALTER Trigger [trg_AlertLogEntry_SendsOnInsert] ON [dbo].[AlertLog]
FOR INSERT AS
declare
@AlertLogID Int
,@AlertMessageTypeID int
,@Comment nvarchar(max)
,@Error_Source nvarchar(max)
,@Error_Procedure nvarchar(max)
,@Error_Message nvarchar(max)
--- etc.
SELECT
@AlertLogID = AlertLogID
,@AlertMessageTypeID = AlertMessageTypeID
,@Comment = isnull(Comment,'')
,@ActivityLogID = isnull(ActivityLogID,-1)
FROM INSERTED
BEGIN TRY
PRINT 'trg_AlertLogEntry_SendsOnInsert'
PRINT @COMMENT
exec proc_SendEmail
@AlertLogID
,@AlertMessageTypeID
,@comment
,@ActivityLogID
END TRY
BEGIN CATCH
select
@Error_Source = 'trg_AlertLogEntry_SendsOnInsert '
,@Error_Procedure = ERROR_Procedure()
,@Error_Message = ERROR_MESSAGE()
--- etc.
INSERT INTO ERROR_LOG
( Error_Source
,Error_Procedure
-- etc.)
VALUES
(
@Error_Source
,@Error_Procedure
,@Error_Message
---etc.)
-- if @@TRANCOUNT > 0
--begin
--commit
--end
END CATCH
STEP 4
ALTER Procedure [dbo].[proc_SendEmail]
(
@AlertLogID Int
,@AlertMessageTypeID int
,@Comment nvarchar(max) = ''
,@ActivityLogID int = -1
)
AS
declare @AlertSubject nvarchar(512)
,@AlertBody nvarchar(max)
,@myQuery nvarchar(512)
,@profile_name1 nvarchar(128)
,@return_value int
,@mymailitem int
,@Error_Source nvarchar(max)
---etc.
,@Error_Comment nvarchar(max)
,@Test int
/*
@return_value int -- not using at this point but 0 is OK 1 is failure
@mymailitem int -- not using now could store mailitem_id which is on msdb.dbo.sysmail_mailitems
sysmail_mailitems.sent_status could be either 0 new, not sent, 1 sent, 2 failure or 3 retry.
*/
select top 1 @profile_name1 = [name] from msdb.dbo.sysmail_profile
order by profile_id
set @profile_name1 = rtrim(ltrim(@profile_name1))
print '@profile_name1: ' + @profile_name1
print '@comment: ' + @comment
Declare @CrsrRecipient Cursor
BEGIN TRY
PRINT 'proc_SendEmail'
--set @test = 1/0 'test crashing
select
@AlertSubject = 'AlertSubject'
,@AlertBody = 'AlertBody'
,@recipients = 'russ@test.com'
print 'sending email ' + CAST(getdate() as nvarchar(100))
EXEC @return_value = msdb.dbo.sp_send_dbmail
@profile_name = @profile_name1
,@recipients = @EMAILID
,@body = @AlertBody
,@subject = @AlertSubject
,@mailitem_id = @mymailitem OUTPUT
print 'Done ' + CAST(getdate() as nvarchar(100))
print cast(@return_value as nvarchar(100))
update alertlog
set AlertSendStatusID = 1 --sent
where
@AlertLogID = AlertLogID
END TRY
BEGIN CATCH
PRINT 'ERROR OCCURED'
PRINT ERROR_Procedure() + ' ' + ERROR_MESSAGE()
select
@Error_Source = ' proc_SendEmail '
,@Error_Procedure = ERROR_Procedure()
--- etc.
INSERT INTO ERROR_LOG
( Error_Source
,Error_Procedure
---etc.)
VALUES
(
@Error_Source
,@Error_Procedure
,@Error_Message
--- etc.)
update alertlog
set AlertSendStatusID = 2 --error
where
@AlertLogID = AlertLogID
--if @@TRANCOUNT > 0
--begin
--commit
--end
END CATCH
View 5 Replies
View Related
Jun 8, 2001
We are migrating a SQL 6.5 application with 1900 stored procedures that use 100's of temp tables to SQL 2000.
A problem we have encountered was that we started out getting an "invalid column" errors on certain procedures. Investigation determined that the error was being generated in a nested procedure. The table that caused the error ended up being a temp table that was created using "select into". The following select statement from that temp table gave the invalid column error.
First thinking it was the "Select Into" we then discovered that the outer most procedure had created a temp table of the same name prior to executing the lower level procedure. After the select into, the next statement was a SELECT that went against what it thought was the inner temp table. However, it grabbed the outermost temp table and then couldn't find the appropriate columns and generated the error.
The solution, of course, was to rename the inner most temp table. We also remove the "select into" in the procedure by explicitly creating the temp table.
We tried creating some test procedures to attempt to reproduce this scenario without complete success.
Our test created 3 procedures (sp1 calling sp2 calling sp3) to mimic the current scenario. Sp1 created a temp table and executed sp2, which executed sp3. Sp3 created another temp table using the same name as the one created in sp1.
If we create all three procedures at the same time, it doesn't matter if we change the order in which they are created or whether we create the inner temp table explicitly or with a "select into", SQL Query Analyzer won't let us create the procedure because it finds that the temp table has been declared twice. If we create the procedures separately however, they compile and allow sp3 to create a temp table by the same name as sp1. After creating the procedures independently, they runs properly in all cases with everything in proper scope and no problems.
Admittedly, this is bad coding to start with, but what is happening with the scope of the temp tables within the stored procedures?
Thanks,
Glen Smith
View 1 Replies
View Related
Jul 23, 2005
Hi,I'm adapting access queries to sql server and I have difficulties withthe following pattern :query1 : SELECT * FROM Query2 WHERE A=@param1query 2: SELECT * FROM Table2 WHERE B=@param2The queries are nested, and they both use parameters.In MS Acccess the management of nested queries with parameters is soeasy (implicit declaration of parameters, transmission of parametersfrom main query to nested query)that I don't know what the syntax should be for stored procedures.The corresponding stored procedure would be something likeCREATE TABLE #TempTable (...table definition...)INSERT INTO #TempTable ExecProc spQuery2 @Param2SELECT * FROM #TempTable WHERE A=@Param1And spQuery2 would be : SELECT * FROM Table2 WHERE B=@ParamI was wondering if this syntax would work and if I can skip theexplicit declaration of #TempTable definition.Thanks for your suggestions.
View 5 Replies
View Related
Feb 11, 2006
Hi there,I have a data manipulation process written in a Nested Stored procedurethat have four levels deeper. When I run these individual proceduresindividually they all seems to be fine. Where as when I run them alltogether as Nested proces (calling one in another as sub-procedures) Logfile is growing pretty bad like 25 to 30GB.. and finally getting kickedafter running disk space. This process is running around 3hrs on a SQLserever Standard Box having dual processer and 2gb ram.This procedures have bunch of bulk updates and at least one cursor ineacch procedure that gets looped through.I was wondering if anybody experienced this situation or have any clueas to why is this happening and how to resolve this?I am in a pretty bad shape to deliver this product and in need of urgenthelp.Any ideas would be greatly appreciated..Thanks in advance*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Apr 16, 2007
Hi all,
I had developed all my reports using CRXI and stored procedures of MSSQL 2000. Now I am migrating from CRXI to SSRS. But i have a problem because of my report stored procedures. These stored procedures are complex and nested. When i try to use procedures in a report, it gives a error. When i comment out my EXEC line in my procedures, it goes OK.
Please help me to do this ?
View 1 Replies
View Related
Nov 6, 2007
I surfed a lot of the internet piecing this together. I have a database that gets copied every night from a live database so users can run queries against it, so I needed to be able to recreate a stored procedure from within ASP.NET. Also, I needed to take information I was importing from a .CSV file and compare it using the stored procedure to find specific information and import it into another database. I was able to do this using the SQLDMO reference object.
Here are some clipits of what you need.
Imports SQLDMOPrivate myServer As New SQLServer
Dim serverName As String = System.Configuration.ConfigurationManager.AppSettings("Server").ToString()Dim userName As String = System.Configuration.ConfigurationManager.AppSettings("UserName").ToString()
Dim password As String = System.Configuration.ConfigurationManager.AppSettings("Password").ToString()
Dim storedProcedure As New StoredProcedure
Dim qresults As SQLDMO.QueryResults
Example Stored Procedure
Try
myServer.Connect(serverName, userName, password)
storedProcedure.Text = "IF EXISTS (SELECT * FROM sysobjects WHERE name='memb_proc' AND user_name(uid)='dbo') DROP PROCEDURE dbo.memb_proc"myServer.Databases.Item("<databasename>", "dbo").StoredProcedures.Add(storedProcedure)
storedProcedure.Text = "CREATE PROCEDURE dbo.memb_proc @lastname varchar(50) = '', @firstname varchar(50) = '', @zip varchar(5) = '', @membrowno varchar(50) OUTPUT AS Select @membrowno = rowno from memb where lastname LIKE @lastname and name LIKE @firstname and zip1 LIKE @zip "myServer.Databases.Item("<databasename>", "dbo").StoredProcedures.Add(storedProcedure)
Label1.Text = "Creation of stored procedure successful"Catch ex As Exception
Label1.Text = "Creation of stored procedure failed"
Finally
myServer.DisConnect()End Try
Run Stored Procedure and Obtain Results
myServer.Connect(serverName, userName, password)
qresults = myServer.ExecuteWithResults("USE [databasename] DECLARE @return_value int,@membrowno varchar(50) EXEC @return_value = [dbo].[memb_proc] @lastname = N'" & Last & "', @firstname = N'" & First & "',@zip = N'" & ZIP & "', @membrowno = @membrowno OUTPUT SELECT @membrowno as N'@membrowno'")For num = 1 To qresults.Rows
MemberRowNo = qresults.GetColumnString(num, 1)
Next
myServer.DisConnect()
View 3 Replies
View Related
Jul 9, 2006
Hi,
I would like to use a stroed procedure within another stored procedure ( nested sp )
in a SQL project in VS.NET 2005. Since I have to use "context connection = true" as
connection string, I wont be able to use this connection for another sqlconnection
object. Because its already open. and If i try to use a regular connection string
("server=localhost;...") it will raise a security permission error. Having this
problem, Im not able to use nested stored procedures. Would anyone please give me a
hint how to resolve this issue?
View 4 Replies
View Related
Oct 1, 2014
I am calling stored procedure called GetCommonItemCount within another stored procedure called CheckBoxAvailability, the first stored procedure should return a count to second stored procedure and based on that some logic will be executed.
I have 2 problems in that
1. The result is not coming from first stored so the variable called @Cnt is always 0 although it should be 18
2. At the end i need to see in the output the result from second stored procedure only while now i am seeing multiple results of record sets coming.
I have attached the scripts also, the line i described in step1 is
View 9 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
Aug 10, 2015
One of our Oracle Tables changed and I am wondering if there's any way that I can query all of our Stored Procedures to try and find out if that Oracle Table Name is referenced in any of our SQL Server Stored Procedures OPENQUERY statements?
View 2 Replies
View Related
Nov 22, 2006
How many parameters can I use for a Stored Procedure.
View 4 Replies
View Related
Jun 18, 2004
Hi all,
Just a quick question regarding the use of stored procedures with parameters.
How do I call a stored procedure with a different number of parameters?
For example if:
new SqlParameter("@SectionID", "3"),
new SqlParameter("@Sessionid", Session["ID"])
SqlHelper.ExecuteNonQuery(conn, CommandType.StoredProcedure, spName, sqlParams);
were to change to the following on a different page:
new SqlParameter("@SectionID", "3"),
new SqlParameter("@Sessionid", Session["ID"]),
new SqlParameter("@ExtraVariable", ExtraVariable)
SqlHelper.ExecuteNonQuery(conn, CommandType.StoredProcedure, spName, sqlParams);
How would I handle the different number of parameters in the Stored Procedure?
cheers,
Pete
View 1 Replies
View Related
Jun 23, 1998
I want to create a stored procedure with SQL Server 6.5 that CAN take 3 parameters, all of which are optional. The declaration for the stored procedure is :
CREATE PROCEDURE BackOrdersII @CustCode varchar(10), @FromDate datetime, @ToDate datetime AS
SELECT * FROM ISO_Details
WHERE DATEDIFF(dd, fldEst_Del_Date, getdate()) > 0 AND CONVERT(char(12),fldActual_Del_Date,3)=`01/01/00` AND CONVERT(char(12),fldEst_Del_Date,3)<>`01/01/00` AND fldDeleted<>1
ORDER BY DATEDIFF(dd, fldEst_Del_Date, getdate()) DESC
How do I formulate the procedure to allow me to select from the table, keeping the current WHERE clause but adding extra items to allow the results to be further filtered depending upon which of the parameters are given to the procedure. Any one, two, or all three parameters could be given.
Sorry if this seems like a simple question but I am only just getting into using stored procedures.
Thanks Rupert
View 1 Replies
View Related
Aug 24, 2004
Have looked everywhere and cannot find the answer! So perhaps someone here can answer.
I have an Access 2000 front-end to a SQL Server 2000 database.
I know how to create Stored Procedures that receive parameters; and also how to open a Stored Procedure in the query results window using the DoCmd object. For example,
Application.DoCmd.OpenStoredProcedure "MyProc", acViewNormal, acReadOnly
Does anyone know of a way to pass parameters to Stored Procedures & open the result using the DoCmd object? Without getting a parm input dialog?
Alternatively, does anyone know of a way to open a Stored Procedure in the query results view without using the DoCmd object?
Will appreciate any guidance you can provide! Thanks!
CarlR
View 3 Replies
View Related
Jul 20, 2005
I use a stored procedure that is calling several other stored procedurewhich update or append values in several tables. All of them are storedprocedures with input parameters by which they filter rows to be updated orinserted into other tables.Filtration is based on certain actual values on forms (form with severalsubforms).My question is following: How to pass parameters to those stored proceduresthat are triggered by a button?Those stored procedures are not recordset of forms, so I can't pass it usingInput Parameters property of forms (or I can?).Thanks.Zlatko
View 1 Replies
View Related
Apr 16, 2014
In t-sql 2008 r2 I need execute a stored procedure called StudentData and pass 3 parameter values to the stored procedure. The stored procedure will then return 5 values that are needed for the main sql. My problem is I do not know how to have the t-sql call the stored procedure with the 3 parameter values and pass back the 5 different unique data values that I am looking for.
The basic dataset is the following:
SELECT SchoolNumber,
SchoolName,
StudentNumber,
from [Trans].[dbo].[Student]
order by SchoolNumber,
SchoolName,
StudentNumber
I basically want to pass the 3 parameters of SchoolNumber, SchoolName, and StudentNumber to the stored procedure called StudentData from the data I obtain from the [Trans].[dbo].[Student]. The 3 parameter values will be obtained from the sql listed above.
The columns that I need from the stored procedure called StudentData will return the following data columns
that I need for the report: StudnentName, StudentAddress, Studentbirthdate, StudentPhoneNumber, GuardianName.
Thus can you show me how to setup the sql to meet this requirement I have?
View 2 Replies
View Related
Mar 28, 2007
My colleague and I (both are newbie’s to .NET) are divided on whether to use stored procedures or parameters.
His viewpoint is, using stored procedures you are spreading the load i.e. SQL server and web server etc. This is not a good solution because it is not a portable when it has to be relocated.
Is he right?
I thought to avoid SQL injection it is best to use stored procedures but I do see his reasoning as well.
Yazzy is Very confused!!
Thanks in advance for any of your thoughts
View 2 Replies
View Related
Dec 9, 2007
How can I pass a name of a table to a stored procedure.
I want to pass the name as a parameter. The table already exists in the db.
After that, I will do
"SELECT .....
FROM @tableparameter"
What is the right way to do that?
View 3 Replies
View Related
Feb 17, 2005
Hello,
I seached around for an answer to this question but didn't have much luck. Hopefully someone can help.
I am passing two parameters from a web page to a stored procedure. The first paramater @Field is the name of the field in the database I want to search, the second @Value is the value to seach for. The @Value works fine but the SP does not seem to recongnize the field parameter. I'm not sure if what I am attemping is not supported or wheather I just need to format the @Field in a different manner. The code and stored procedure is below.
Thanks for your help, Gary
Here is the web code:
Dim conMSS As New SqlConnection(ConfigurationSettings.AppSettings("dsnMSS"))
Dim cmdItems As New SqlCommand("DS-SPRS.dbo.s_ItemLookUp", conMSS)
cmdItems.CommandType = CommandType.StoredProcedure
cmdItems.Parameters.Add(New SqlParameter("@Field", SqlDbType.VarChar, 50))
cmdItems.Parameters.Add(New SqlParameter("@Value", SqlDbType.VarChar, 50))
cmdItems.Parameters("@Value").Value = txtValue.Text & "%"
cmdItems.Parameters("@Field").Value = lstField.SelectedValue
conMSS.Open()
dgdItems.DataSource = cmdItems.ExecuteReader
dgdItems.DataBind()
conMSS.Close()
Here is the stored procedure:
CREATE PROCEDURE s_ItemLookUp
@Field AS VARCHAR(50),
@Value AS VARCHAR(50)
AS
SELECT DIV_NO, DIV_NM, LN_NO, LN_DS, ITM_NO, PRD_DS, ITM_MFG_NO, VND_HFC_NM
FROM PRODUCT
WHERE @Field LIKE @Value
ORDER BY DIV_NO, LN_NO, ITM_NO
GO
View 4 Replies
View Related
Nov 18, 2005
I am creating a stored Procedure and I am getting an error which relates to DATENAME.
SELECT COUNT(*) AS calls, DATENAME(@varDate, CALLSTARTTIME) AS 'Total Calls'
FROM CALL_LOG_MASTER
WHERE (COMMERCIALS='1') AND (CALLSTARTTIME >= @StartDate) AND (CALLENDTIME <=@EndDatesql doesn't like: DATENAME( @varDate, CallStartTime)sql works fine if I change @varDate into 'yy', 'mm', 'dd', or 'wk'Since I do not want to make 5 unique Stored Proc just because of @varDate.....Is there any way to work around this problem?
View 8 Replies
View Related
Mar 5, 1999
I need to create a SP that will accept a varying number of input parameters. A form that the user completes has a several controls that serve to narrow the number of records returned. The more parameters given, the fewer rows returned. In the past I have accomplished this by dynamically building an SQL statement. I dosen't appear possible to pass an SQL statement in a variable to a SP. Any help or pointers would be appreciated.
View 1 Replies
View Related
Feb 15, 2012
I need to set date parameters within Stored Procedures using a sql 2008 R2, with an access 2007 front end. The procedure needs to allow me to set parameters for a start date and an end date.
View 1 Replies
View Related
