T-SQL (SS2K8) :: Winscp To Get Only Current Days Files?
Jan 21, 2015
I have to download the files from SFTP server, for which i am using WINSCP and i am able to successfully automate the process to download the files. But it is downloading all the files instead of only current day's files. Ihave searched for WINSCP documentation for time query parameter to pass to the get command. But its not working.
My source file name contains Datefield as "Filenameexample_150120_N001.txt".
Here 150120 mean Jan 20 2015.
Winscp has no functionality to query the files to parse using datefield. how to look for files which are from today's date.
Currently i am downloading files which contain *.* (meaning all files).
I am pulling data that shows appt information on a patient:
FName,LName, PhoneNumber, ApptDate, ApptTime, and Status that equals Active. I need to pull this info everyday. How can I set this up in a stored procedure to pull all this information automatically on a daily basis where it pulls by Appt Date that is 2 days greater than the current date?
I have a dynamic sql query where in I am comparing two tables and loading data for last 15 days. e.g today 2050921 then I am going to load till 20150906.
I pass on 2 variables @currentdate and @currentdate-1 to the query which are in date format 'yyyymmdd'
I need to do this for last 15 days how do I do this using while loop.
Note my date format is YYYYMMDD.
DECLARE @SQL VARCHAR(MAX) @sql = ' insert into target select from table_1_currentdate a LEFT JOIN Table_2_currentdate-1 b on a.col1=b.col1 where b.col1 is null '
exec(@sql)
I have to use while loop and decrement it every time and load data for last 15 days comparing two tables. I tried so many times I am not getting it right .
The following query was used for retrieving dates for the last 7 days . Untill February this query was running fine and would return the last seven days date including today.
SELECT DISTINCT TOP 7 Convert(DateTime, DATEDIFF(DAY, 0, DateCreated)) AS DateCreated, datepart(dw,DateCreated) AS WeekNum from [TechnologyRepository].[helpdsk].[WorkDetails] WHERE DATEDIFF(DAY, Convert(DateTime, DATEDIFF(DAY, 0, DateCreated)),GETDATE()) <= 7
However from March (not sure of the exact date)..the query below would only give us 7 days until yesterday..i.e it would list dates from 3/19,3/20,3/21,3/22,3/23,3/24,3/25 and not 3/26 ..
I changed the query to <= 6 and it works as expected. But still not sure why it would not return todays date with <= 7.
SELECT DISTINCT TOP 7 Convert(DateTime, DATEDIFF(DAY, 0, DateCreated)) AS DateCreated, datepart(dw,DateCreated) AS WeekNum from [TechnologyRepository].[helpdsk].[WorkDetails] WHERE DATEDIFF(DAY, Convert(DateTime, DATEDIFF(DAY, 0, DateCreated)),GETDATE()) <= 6
--From the rows I want to know how many number of days a person was active for the given date range.
create table [dbo].[personstatus] ( id int identity(1,1), name varchar(100), DateAdded date, InactivationDate date ) ; insert into [dbo].[personstatus] values
[Code] ....
--The output I am looking for. /* 1) FromDt = '2014-01-01' ToDt ='2014-01-30' KRISS = 7 VDENTI = 7 days
Hi I have created a job to backup all our database. It works fine and creates .bak files in default folder. I have scheduled the task to run every 4 hours.
My question is how can i modify or program this backup plan to keep the backup files for only last 3 days and delete older backup files?
How can we write a query to achieve this while keeping in mind:
- We do not want to do unnecessary record lookups and Updates - We only update records that corresponds to new entries. For example, we should not touch the record for InvoiceID = 2 in the above example
I am novice to intermediate writer of T-SQL. Here is my current Query:
SELECT [FISCALYEAR], [ACCTPERIOD], SUM([ACTIVITYDEBIT]) AS TrialBalanceDebit, [POSTINGTYPE] FROM [dbo].[TB_Lookup] WHERE [POSTINGTYPE]='Profit & Loss' GROUP BY [FISCALYEAR],[ACCTPERIOD], [POSTINGTYPE] ORDER BY acctperiod ASCand this is what is produces.
FISCALYEARACCTPERIODTrialBalanceDebitPOSTINGTYPE 2014 201401 282361372.13000 Profit & Loss 2014 201402 227246272.86000 Profit & Loss 2014 201403 315489534.33000 Profit & Loss 2014 201404 287423793.76150 Profit & Loss 2014 201405 256521290.76000 Profit & Loss 2014 201406 65582951.30000 Profit & Loss
Now I need a way to add another field that takes the TrialBalanceDebit from current ACCTPERIOD and adds it to the Previous ACCTPERIOD TrialBalanceDebit.
I have a query that will go into an ssis package (eventually). The package will run every night at 3am. I need to capture the last 24 hours of by using something like:
SELECT worktype, changedate, woclass where siteid = 'GTM' and woclass = 'WORKORDER' and istask = 0 [highlight=#ffff11]and changedate between '2015-01-13 03:00:00' and '2015-01-14 03:00:00'[/highlight]
I know I am not doing the between correctly to get the changedate between the last 24 hours. Is there a way to correct this so that I am only getting the change date that is between 3am today and 3am yesterday on any given day I happen to run this?
I've tried all sorts of code i.e. cross apply, running totals, etc. Cannot get this to work. I am trying to add a previous row value but only doing it for each group.
I would like to set the start time of the next row to be equal to the previous row time + duration. I know the start time of each group of 'Items' when the 'Sequence' number = 1. The last 'duration' value in the group would be ignored.
I want to delete files on windows from a directory which are 2 days old. I understand we can do that using xp_cmdshell. Anybody with a script would really help me.
What I am trying to do: Obtain attendance percentages for schools for the last five days. The outcome would look like this:
DISTRICTGROUPING, SCHOOLNAME, 5 DAYS AGO PCTG, 4 DAYS AGO PCTG, 3 DAYS AGO PCTG, 2 DAYS AGO PCTG, 1 DAY AGO PCTG I am using nested subqueries for each day as follows: (total enrollment-total absent/total enrollment) ,( ((SELECTCOUNT(*)--GET TOTAL ENROLLMENT COUNT FOR SPECIFIED DATE
[Code]....
The query works with the following exceptions:
My issues are:
1. Avoid the "division by zero" error. This can occur if a school is closed for a day or if a smaller school has no absences for a day.
2. Avoid weekend dates. I need the query to display only weekdays
3. Currently I am using "PERCENTAGE 5: as a column header whereas I need the actual date as the header.
I am working on some payroll related code which currently has the following hard-coded CASE statement (I won't include the entire thing, it is lengthy):
AND b.TCDateTime BETWEEN '2013-01-01 0:00' and '2013-12-31 23:59'
I want to get rid of the hard coding, and have this use current year dates. So for 2014, it should reference rows where the TCDateTime is >='2014-01-01 0:00' AND <'2015-01-01 0:00'..I think the following would accomplish this, but would like confirmation that this is the 'best' way (and that it will work!)
SELECT CONVERT(DATETIME, CONVERT(CHAR(4), DATEPART(yyyy, GETDATE())) + '0101') AS curryrbegin --output should be yyyy-01-01 00:00:00.0 where yyyy is current year SELECT CONVERT(DATETIME, CONVERT(CHAR(4), DATEPART(yyyy + 1, GETDATE())) + '0101') AS nextyrbegin --output s/b nextyear-01-01-00:00:00.0
Then, change the CASE statement to read:
AND (b.TCDateTime >= curryrbegin AND < nextyrbegin)
I am working on a report and the data source is Teradata. now I have situation where I want to get order id details based on the current quarter and year I am posting this same data. For TD related queries I do not where to post.
We are trying to compare our current calendar week (based on Monday being the first day of the week) with the previous calendar week.
I'm trying to produce a line chart with 2 axis:
- x axis; the day of the week (Mon, Tues, Wed etc - it is fine for this to be a # rather than text e.g. 1 = Mon, 2 = Tues etc) - y axis; the cumulative number of orders
The chart needs two series:
Previous Week. The running count of orders placed that week. Current Week. The running count of orders placed this week.
Obviously in such a chart the 'Current Week' series is going not going to have values along the whole axis until the end of the week. This is expected and the aim of the chart is to see the current week compares against the previous week for the same day.
I have two tables:
Orders TableCalendar Table
The calendar table's main date column is [calDate] and there are columns for the usual [calWeekNum], [calMonth] etc.
My measure for counting orders is simply; # Orders: = countrows[orders].
How do I take this measure and then work out my two series. I have tried numerous things such as adapting TOTALMTD(), following articles such as these:
- [URL] ... - [URL] ...
But I have had no luck. The standard cumulative formulas do work e.g. if I wanted a MTD or YTD table I would be ok, it's just adjusting to a WTD that is causing me big issues.
I am using the backup task and backing up a database but want to delete all backup files older than 5 days old. I am using the file task for this and have built the path in a variable but am trying to use a wildcard for the time. I am getting illegal character in path. How can I go about this.
I currently have E:MSSQL.1MSSQLBackupdatabasename_backup_20070309*.bak in my input variable and am trying to delete the file databasename_backup_200703091532.bak
CREATE TABLE #TEMP ( TYPE VARCHAR(10), SEQ INT, SUB_TYPE VARCHAR(10))
[Code] ....
Now for each type the seq is very important. Effectively by order of seq the subtype stays the same until another subtype changes it. So for TYPE1 100,110 and 150 are A. 170, 200,220 are B. 230 and 250 are C and so on.
However as you can see the data isnt actually stored in the row. I need a select statement that shows this data.
I have done this:
SELECT t1.*,t3.SUB_TYPE FROM #TEMP t1 CROSS APPLY (SELECT MAX(SEQ) SEQ FROM #TEMP AS t2 WHERE t1.SEQ >= t2.seq AND t2.SUB_TYPE <>'' AND t1.TYPE = t2.TYPE GROUP BY t2.TYPE) t2 INNER JOIN #TEMP t3 ON t3.TYPE = t1.TYPE AND t2.SEQ = t3.SEQ
And it seems to work. Is this the easiest way to do it or am i missing something?
I need help with creating a query that compares the current date with a stored date field. If the difference between the two dates is greater or equal to 5 days for example, I need to be able to return these records. I am not sure if this can be done through a query alone but any help and suggestions would greatly be appreciated. Thanks in advance.
I'm trying to call WinSCP in a SSIS Execute Process Task using a .bat file to automate. SSIS is returning a generic failure error message ("Error: 0xC0029151 at Execute Process Task, Execute Process Task: In Executing "MyServerC$Program Files (x86)WinSCPWinSCP.exe" "-script=MyNASShareWinSCPFTP.bat " at "", The process exit code was "1" while the expected was "0"."). So now I'm trying to run the .bat file by itself. Unfortunately, the command prompt rushes by so fast that I can't see what the server is doing.
I can't find anything on the WinSCP site that indicates how to slow down the .bat file processing or log the remote server responses. I do see how to use the /log switch when using the interactive command line console, but that's not what I want to do.
I want to delete all files in a given folder that are older than 3 days from today's date.
I tried using a "Foreach Loop container" with a "File System" task inside it but found I couldn't access any file properties such as the file creation date. Am I using the wrong task for this job?
TIA,
Barkingdog
P.S. History of the problem:
I used the sql 2005 Database maintenance program to setup our database backup jobs. One day I noticed that the free space on the drive where we keep the dumps had grown small. I found that we had at least 4 weeks of dumps in there, not the 3 days I wanted to keep! I looked but could not find the "delete file" option in the SSIS package generated by the Database Maintenance Wizard. No wonder the files were piling up.
I would like to generate a working schedule for employees for x-days ahead based on a starting date that the user can enter.
I have got 3 relevant tables:
1. Table X with (1) resourcenumber, (2) starting date working schedule and (3) the daynumber representing the starting date (this is ISO so 1 for Monday, 2 for Tuesday etc.)
2. Table Y has the schedule itself and can hold a 7-days schedule or a 14-days schedule. In case of 7 days schedule there a 14 (!) records with (1) resourcenumber, (2) daynumber, (3) starting hour a.m. (4) ending hour a.m (5) starting hour p.m and (6) ending hour p.m. In case of a 14-days schedule there are 28 records (a.m. and p.m. records)
3. Table Z with resource data.
An example to clarify (for fake employee 100):
Table X: Resource: 100 Starting date: 2012-03-01 (from this date the schedule will be effective) Daynumber: 4 (2012-03-01 was a Thursday)
Table Y (Resource has a 14 days schedule because per 2 weeks Monday is an off-day):
Record 1 shows: Resource: 100, Daynumber: 1 (= Monday, working day), AM-Starting hour: 09:00, AM-Ending hour: 13:00, PM-starting hour: 13:30, PM-ending hour: 17:30 Record 2: same but daynumber is 2 Record 3: same but daynumber is 3 etc. ... Record 8 shows: Resource: 100, Daynumber: 8 (= Monday, off-day), AM-Starting hour: 00:00, AM-Ending hour: 00:00, PM-starting hour: 00:00, PM-ending hour: 00:00 Record 9: same as record 2 but daynumber is 9. etc. ... Record 14: same as record 7 but day is 14 (= last day)
The weekend days show as 00:00 for the hours (same as day 8 in example)
I generated the working schedule with a CROSS APPLY function based on the starting date and the x-number of days ahead.
I then evaluate the actual daynumber corresponding with that date with the daynumber in table Y. That works fine with a 7-days schedule but I can't get it fixed with a 14-days schedule. Day 8 in that schedule represents an actual day 1 but how do I know what actual date day 8 is ... I think I have to start with the starting date in table X ...
I think ideally I would like to have the generated days as follows (as an example in case of a 14-days schedule starting 2014-05-01 for 30 days ahead):
2014-05-01 = day 4 (= actual daynumber) 2014-05-02 = day 5 2014-05-03 = day 6 ... 2014-05-10 = day 13 2014-05-11 = day 14 2014-05-12 = day 1 2014-05-13 = day 2 2014-05-14 = day 3 ... 2014-05-24 = day 13 2014-05-25 = day 14 2014-05-26 = day 1 2014-05-27 = day 2 ... 2014-05-31 = day 6
With this done I can compare the actual daynumber with the daynumber in Table Y.
The rownumber that the CROSS APPLY function generates has to be reset to 1 after day 14. I tried PARTITION BY in THE ROW_NUMBER function but to no avail ... The only field I can partition by is the maximum value of the daynumber (14 is the example) but that is not allowed in the rownumber function.
I am using MSSQL Server 2008R2 and I am interested in returning rows from a 'financial' table that fall within the current year (each row contains a 'Entered Date'). I am located in Australia so my financial year consists of all entries between the date 01/07/xx to the 30/06/yy.
Perhaps using the datediff() function, or other functions as required to achieve what I need?
I have a table with score info for each group, and the table also contains historical data, I need to get the ranking for the current week and previous week, here is what I did and the result is apparently wrong:
select CurRank = row_number() OVER (ORDER BY cr.CurScore desc) , cr.group_name,cr.CurScore , lastWeek.PreRank, lastWeek.group_name,lastWeek.PreScore from (select group_name, Avg(case when datediff(day, asAtDate, getdate()) <= 7 then sumscore else 0 end) as CurScore
[Code] ....
The query consists two parts: from current week and previous week respectively. Each part returns correct result, the final merged result is wrong.
I have Developed ETL Package Which Supplying the CSV File, if I run the package Next time if Same File name is there I need to Rename the that File with Currentdatetime need to move in to Archive Folder. if that File is not exist in that location no need to move the file into Archive file.
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U')) DROP TABLE [dbo].[table_Data] GO /****** Object: Table [dbo].[table_Data] Script Date: 04/21/2015 22:07:49 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
I would like to add to it the actual file size in mb or gb of each file to the results.
select sd.name,mf.name as logical_name,mf.physical_name, case when dm.mirroring_state is null then 'No' else 'Yes' end as Mirrored from sys.sysdatabases sd JOIN sys.master_files mf on sd.dbid = mf.database_id join sys.database_mirroring dm on sd.dbid = dm.database_id
The sp_spaceused procedure does a nice job on it's own giving me what I want (only one db though), plus a bonus allocated space column. How can I combine this sp with my other query, or is there a better way to ad this information?
