T-SQL (SS2K8) :: Write Into A Table User-entered Value And Increment That Number N Times As Existing Rows

Jun 25, 2014

I need to have a script where it ask the user for a value, the script will search for all records that match the value. Then it will display the numbers of records found and ask the user to enter a different value. The rest of the script will use this new value and increment by 1 n times as the number of records found. I started the script where it will ask for "HANDLE" and display the number of records found with that "HANDLE"

declare @HANDLE as varchar(30)
declare @COUNT as varchar(10)
declare @STARTINV as varchar(20)

set @HANDLE = ?C --This is the parameter to search for records with this value
set @STARTINV = ?C --User will input the starting invoice number
SELECT COUNT as OrderCount FROM SHIPHIST
where HANDLE = @HANDLE

I just can't figure out how to proceed to use the entered invoice # and increment by 1 until it reach the number of records found.

This will be the end results:

Count=5 --results from query
STARTINV=00010 --Value entered by user

Handle,Inv_Num
AAABBB,00010
AAABBB,00011
AAABBB,00012
AAABBB,00013
AAABBB,00014

View 9 Replies


ADVERTISEMENT

T-SQL (SS2K8) :: Updating Existing Table With Max (value) And Row Number (partition By 2 Columns)

Sep 15, 2015

I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null

job_cdpermit_nbrreference_nbr
ABC1 990 100002
ABC1 990 100002
ABC1991100003
ABC1992100004
ABC1993100005
ABC2880100006
ABC2881100007
ABC2881100007
ABC2882100008
ABC2882100008

View 2 Replies View Related

Add Column To Existing Table With Large Number Of Rows

Dec 24, 2007

Hey Guys

i need to add a datetime column to an exisitng table that has like 1.2 million records and its being accessed frequently
but i cant afford to stop the db at all

whenever i do : alter table mytable add Updated_date datetime

it just takes too long and i have to stop executing the query after a couple of mins
I am running sql express 2005 sp2. db size is over 3 gb but still under the 4 gb limit

can u plz advice on how to add this column. its urgent!!

thanks in advance

View 5 Replies View Related

T-SQL (SS2K8) :: Number Of Rows And Range For Each Partition In A Table?

Mar 13, 2015

Is it possible to show the number of rows and the range for each partition in a table ?

This shows me the range but not the row count per partition

SELECT sprv.value AS [Value], sprv.boundary_id AS [ID] FROM sys.partition_functions AS spf
INNER JOIN sys.partition_range_values sprv
ON sprv.function_id=spf.function_id
WHERE (spf.name=N'myDateRangePF')
ORDER BY [ID] ASC

View 4 Replies View Related

Deleting Large Number Of Rows Times Out

Sep 14, 2007

I have a table with about 10 million rows, its been logging data incorrectly and I want to start again.

DELETE FROM tblLog

I just get a message about the server timing out, what can I do?

Thanks

View 5 Replies View Related

Adding An Auto-increment Column To Existing Table With A Particular Order

Oct 19, 2005

Hello all,I'm using SS2K on W2k.I'v got a table say, humm, "Orders" with two fields in the PK:OrderDate and CustomerID. I would like to add an "ID" column whichwould be auto-increment (and would be the new PK). But, I would reallylike to have orders with the oldest OrderDate having the smallest IDnumber and, for a same OrderDate, I'd to have the smallest CustomerIDfirst. So my question is:How could I add an auto-increment column to a table and make it createits values in a particular order (sort by OrderDate then CustomerIDhere)?In the real situation, the table I want to modify has around 500krecords and the PK has 5 fields and I want to sort on three of them.Thanks for you helpYannick

View 7 Replies View Related

Add Sequence Number To Existing Table

Nov 14, 2013

I have a table with no sequence column. I created a new column, but I need a way to add sequence number. This is not going to be a Primary key or indexed. I assume I will use update, but how do I do this?

Example

Before
Name | Seq
Paul | NULL
Tom | NULL
Grant | NULL

After
Name | Seq
Paul | 1
Tom | 2
Grant | 3

View 1 Replies View Related

How To Enter More Number Of Rows In A Table Having More Number Of Columns At A Time

Sep 24, 2007

Hi

I want to enter rows into a table having more number of columns

For example : I have one employee table having columns (name ,address,salary etc )
then, how can i enter 100 employees data at a time ?

Suppose i am having my data in .txt file (or ) in .xls

( SQL Server 2005)

View 1 Replies View Related

T-SQL (SS2K8) :: How To Write Script Without Using Temp Table Or Cursor

Jun 4, 2015

I have a cte:
With cte as
(
Select distinct Incident_ID,
ACTUAL_SEVERITY ,
Policy
From
table)

There are 3 ACTUAL_SEVERITY value: 1-High, 2-Medium and 3-Low

I need the final result be like:
Policy High Medium/Low

How do I write the script with out using temp table or cursor?

View 6 Replies View Related

T-SQL (SS2K8) :: Search Based On Table Name And Add Code To Existing Stored Procedures

Jun 30, 2014

Below is sample SQL:

SQL_1: Creates a database
SQL_2: Creates 2 stored procedures

Now, I need to search database SP`s for Table2 t2 ON t2.CID = t1.CID and ALTER them with Table2 t2 ON t2.CID = t1.CID.

INNER JOIN Table3 t3 ON t3.CID = t1.CID
WHERE CustGroup = 'Employees'SQL_1:
USE [master]
GO

[code]...

View 6 Replies View Related

T-SQL (SS2K8) :: Finding Rows Where User Has Access To Contents But Not Record

Mar 27, 2014

I'm got a "folder" structure application which we'll be using as an in-house directory viewer. (In case you're wondering, it doesn't relate to any "real" folders, so using xp_cmdshell is out! )

Each folder and file record can have its own permissions, however these are assumed to inherit from the parent folder if no specific access rules have been set, basically in the same way file systems work. Each file record can only have one parent, and a folder can either have a parent or be at the root level.

Right now I'm having an issue with the inheritance of permissions. Say if I want to grant access to "Folder 1" to "Group A", then "Group B" shouldn't be able to see it. However, if I grant access to "File 1" in "Folder 1" to "Group B", then "Group B" should be able to see "Folder 1", but only see "File 1" and not the rest of the contents.

I thought I could do this with a CTE, but I'm having a bit of difficulty..

Here's the code:

CREATE TABLE #FileSystem (
FSIDINTEGER NOT NULL IDENTITY(1,1) PRIMARY KEY
,ParentFSIDINTEGER NULL
,NameVARCHAR(100)
,RecordTypeVARCHAR(1)-- (F)older, or Fi(L)e

[Code] ....

View 1 Replies View Related

Copying All Rows From One Table Into Another Existing Table And Overwriting Data

Feb 15, 2005

i have 2 tables (both containing the same column names/datatypes), say table1 and table2.. table1 is the most recent, but some rows were deleted on accident.. table2 was a backup that has all the data we need, but some of it is old, so what i want to do is overwrrite the rows in table 2 that also exist in table 1 with the table 1 rows, but the rows in table 2 that do not exist in table one, leave those as is.. both tables have a primary key, user_id.

any ideas on how i could do this easily?

thanks

View 1 Replies View Related

Inserting Rows Into Existing SQL Table

May 21, 2008

Hi all,

I am trying to insert some new rows into an existing SQL table. The table name is Agt_table, and I want to add some data for some new agents into existing columns:
Agent name, agent code, phone number, fax number

Example -
I want to add the following record to my existing table Agt_table
Agent name: ABC Company
Agent code: 012345
Phone #: 555-555-5555
Fax#: 555-555-5555

How would I write the sql statement to do that?

Thanks so much!!!

View 12 Replies View Related

SQL 2012 :: Get Total Number Of Each Distinct Value In Column And Write To Another Table

Jul 14, 2014

How can i get the total number of each distinct value in the column and write it to another table e.g.

MyTable

Id Fruit
1 Apple
2 Banana
3 Apple
4 Watermelon
5 Banana
6 Watermelon
7 Apple

Result

Fruit Count
Apple 3
Banana 2
Watermelon 2

View 9 Replies View Related

Select Multiple Rows Of Data Not From Any Pre-existing Table

Apr 29, 2008

I know that this is legal sql: "SELECT 1 AS Blah"
I want to do something like this except for I need to select multiple rows each with a different value for Blah. The query needs to be legal to be passed to the SqlCommand.ExecuteReader Method. Is this possible?

View 3 Replies View Related

Displaying User Entered Data

Jun 25, 2007

I have a procedure that allows a user to enter two dates to run a query. I would like to display those dates on the generated report underneath the title. "5-01-07 to 5-31-07" How would I do this?

View 3 Replies View Related

User Entered Data Error

Jul 6, 2007

Hi Guys,

I'm having a problem with some data in our database, basically a web app is storing data into the DB and then recalling it to display to a user. The problem I am having is that for one particular function the DB is causing the app to fail, the app code works for 95% of the data inserted into the DB by the users but it is failing on a few records.. I'v gone through the data manually checking for funny characters or spaces or anything else which is different from the other records, but everything seems to be in order. I doubt very much that this is a system app code problem as the code is working perfectly for all the other records...

Can anyone advise me on what else I can check.. really stuck on this one guys

Thanks Gurj

View 3 Replies View Related

Transact SQL :: Existing Table Change To Support Multiple Rows?

Nov 4, 2015

Existing table structure is below:

Table name: Student

Columns in Student are below:

Student_Id
Subject_Id
Quarter
Col1
Col2

Combination of Student_Id, Subject_Id and Quarter columns is the primary key. One student can take one subject in a quarter. Now the new requirement is a student can take multiple subjects in a quarter. So need to add another table like below:

NEW table name: Student_Subject and
column are below:
Student_id
Subject_Id
Quarter1

All the above three columns combination is primary key.

After the new table Student_Subject created,
remove Subject_Id column
from Student table.

When the user clicks on a button after selecting multiple subjects and provide col1 and col2 data then one row gets inserted into Student table and multiple rows gets inserted into Student_Subject table.

Is there any other table design that satisfies one student can take multiple subjects in a quarter?

View 15 Replies View Related

Inserting A New Record Into Sql Db Using User-entered Information

Nov 22, 2006

Im trying to add a new rcord to my db on a button click usign the following code
 
'data adapter
Dim dAdapt1 As New SqlClient.SqlDataAdapter
'create a command object
Dim objCommand As New SqlClient.SqlCommand
'command builder
Dim builderT As SqlClient.SqlCommandBuilder
'connection string
Dim cnStr As String = "Data Source=ELEARN-FRM-BETA;Initial Catalog=StudentPlayGround;Integrated Security=True"
'dataset
Dim dsT As DataSet
Private Sub connect()
'connection
objCommand.Connection = New SqlClient.SqlConnection(cnStr)
'associating the builder with the data adapter
builderT = New SqlClient.SqlCommandBuilder(dAdapt1)
'opening the connection
objCommand.Connection.Open()
'query string
Dim query As String = "SELECT * from StudentPlayground..Employees"
'setting the select command
dAdapt1.SelectCommand = New SqlClient.SqlCommand(query, objCommand.Connection)
'dataset
dsT = New DataSet("Trainee Listings")
dAdapt1.Fill(dsT, "Employees")
End Sub
Private Sub BindData()
connect()
DataBind()
End Sub
Protected Sub submitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submitButton.Click
Dim empID As Integer = CType(FindControl("TextBox8"), TextBox).Text
BindData()
Dim firstName As String = CType(FindControl("TextBox1"), TextBox).Text
BindData()
Dim lastName As String = CType(FindControl("TextBox2"), TextBox).Text
BindData()
Dim location As String = CType(FindControl("TextBox3"), TextBox).Text
BindData()
Dim termDate As Date = CType(FindControl("TextBox4"), TextBox).Text
BindData()
Dim hireDate As Date = CType(FindControl("TextBox7"), TextBox).Text
BindData()
Dim dept As String = CType(FindControl("TextBox5"), TextBox).Text
BindData()
Dim super As String = CType(FindControl("TextBox6"), TextBox).Text
BindData()
Dim newRow As DataRow = dsT.Tables("Employees").NewRow
newRow.BeginEdit()
newRow.Item(0) = empID
newRow.Item(1) = firstName
newRow.Item(2) = lastName
newRow.Item(3) = location
newRow.Item(4) = hireDate
newRow.Item(5) = termDate
newRow.Item(6) = dept
newRow.Item(7) = super
newRow.EndEdit()
 
'do the update
Dim insertStr As String = "INSERT INTO Employees" + _
"(EmployeeID,FirstName,LatName,Location,HireDate,TerminationDate,Supervisor)" + _
"VALUES (empID,firstName,lastName,location,hireDate,termDate,dept,super)"
Dim insertCmd As SqlClient.SqlCommand = New SqlClient.SqlCommand(insertStr, objCommand.Connection)
dAdapt1.InsertCommand() = insertCmd
 
dAdapt1.Update(dsT, "Employees")
'Dim insertCmd As new SqlClient.SqlCommand = (builderT.GetInsertCommand()).ToString())
'dAdapt1.InsertCommand = New SqlClient.SqlCommand(insertCmd.ToString(), objCommand.Connection)
BindData()
objCommand.Connection.Close()
objCommand.Connection.Dispose()
End Sub
 
im not sure wats going wrong because the record is not being added. Please help!!

View 4 Replies View Related

I Want To Know The Emailid Entered By User Is Valid Or Not How Can I Do That Please Any One Know The Answer Let Me Know?

Dec 26, 2007



hi
Actually in my project we need to validate the mailid entered by the user not simple validation ,i need to validate wheather the mailid exists .Ex: ravishankar@yahoo.com entered by user whether this mailid is existed in the yahoo or not i,e we want wheather it exists or not................
Please if any one know the solution please send to me .............

Thanks and regards
RavishankerMaduri

View 1 Replies View Related

Change Increment Value For Existing Identity Column

Jul 20, 2004

Hi,
How to Change Increment Value for existing Identity Column (MS SQL2000) ?

I know how to change the seed :
DBCC CHECKIDENT (activity, RESEED,4233596)

but I need the future id generated with step 2
4233596
4233598
4233600
I would like to do it using T-sql because I will need to do it every day after syncronising with another SQL server .

Thanks,
Natalia

View 1 Replies View Related

T-SQL (SS2K8) :: One Table Two Rows

Feb 4, 2015

What I want is to divide the row value for 'OB Dial Attempts' by the row value for '# Ready To Work Inventory', both in the same table.The code below will work, however I think there is a flaw in my logic. The actual table only has one row per category (MatrixCat) and will always have only one row per category.

CREATE TABLE #NumVals (MatrixCat VARCHAR(100), MatrixVal VARCHAR(100));
INSERT INTO #NumVals (MatrixCat, MatrixVal) VALUES
('# Ready To Work Inventory','606'),
('OB Dial Attempts','255');

[code]....

View 8 Replies View Related

SQL Server 2012 :: Update Table Based On Existing Values In Multiple Rows?

Oct 1, 2015

The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.

Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-

The CustID is the same.

Order #2 has a more recent order date.

Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).

So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.

I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.

update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,

[code]....

View 4 Replies View Related

T-SQL (SS2K8) :: Compare Rows In The Same Table?

Aug 7, 2014

We have a table setup to track changes that are made to another table, for auditing purposes. How do we compare the most recent record in the change table with the previous record in the change table? Particularly, we have a column named DUE_DATE in the change table and want to identify when the most recent change has a different DUE_DATE than the previous change made.

View 8 Replies View Related

T-SQL (SS2K8) :: Get Rows And Sum In Joined Table?

May 2, 2015

I want to return all rows in table giftregistryitems with an additional column that holds the sum of column `amount` in table giftregistrypurchases for the respective item in table giftregistryitems.

What I tried, but what returns NULL for purchasedamount, where I want purchasedamount to be the sum of the `amount` for THAT item, based on giftregistrypurchases.itemid=giftregistryitems.id:

SELECT (SELECT SUM(amount) from giftregistrypurchases gps where registryid=gi.registryid AND gp.itemid=gps.itemid) as purchasedamount,*
FROM giftregistryitems gi
LEFT JOIN giftregistrypurchases gp on gp.registryid=gi.id
WHERE gi.registryid=2

How can I achieve what I need?

Here's my table definition and data:

USE [tt]
GO
/****** Object: Table [dbo].[giftregistry] Script Date: 09-05-15 11:15:18 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[giftregistry](
[id] [int] IDENTITY(1,1) NOT NULL,

[code]....

Desired results:

purchasedamountidregistryidtitleogimgdescriptionURLamountpricecreatedate

[URL]

View 9 Replies View Related

How To Archiv Table To Another Table With Unique Number For All Rows Once + Date

Apr 28, 2008

need help
how to archiv table to another table with unique number for all rows once + date time (not the second only day time +minute)
i need whan i insert to the another table add 2 more fields (unique number , date_time )

this is the table 1 i select from
ID fname new_date val_holiday
----------------------------------------------------

111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 1
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1
111 aaaa 20/03/2008 1
111 aaaa 21/03/2008 1

222 bbb 02/05/2008 3
222 bbb 03/05/2008 3
222 bbb 04/05/2008 3
222 bbb 05/05/2008 3
222 bbb 06/05/2008 3
222 bbb 07/05/2008 3
222 bbb 08/05/2008 3
222 bbb 09/05/2008 3

333 ccc 03/04/2008 4
333 ccc 04/04/2008 4

this is the table 2 i insert into
----------------------------------
ID fname new_date val_holiday unique number date_time
--------------------------------------------------------------------------------------------------------------------

111 aaaa 15/03/2008 1 666 15/04/2008 17:03
111 aaaa 16/03/2008 1 666 15/04/2008 17:03
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1 666 15/04/2008 17:03
111 aaaa 20/03/2008 1 666 15/04/2008 17:03
111 aaaa 21/03/2008 1 666 15/04/2008 17:03

222 bbb 02/05/2008 3 666 15/04/2008 17:03
222 bbb 03/05/2008 3
222 bbb 04/05/2008 3 666 15/04/2008 17:03
222 bbb 05/05/2008 3 666 15/04/2008 17:03
222 bbb 06/05/2008 3 666 15/04/2008 17:03
222 bbb 07/05/2008 3 666 15/04/2008 17:03
222 bbb 08/05/2008 3 666 15/04/2008 17:03
222 bbb 09/05/2008 3 666 15/04/2008 17:03

333 ccc 03/04/2008 4 666 15/04/2008 17:03
333 ccc 04/04/2008 4 666 15/04/2008 17:03

for evry archiv table to another table (insert) i need to get a unique number + date time (not the second only day time +minute)

next insert ......
ID fname new_date val_holiday unique number date_time
--------------------------------------------------------------------------------------------------------------------

111 aaaa 15/03/2008 1 667 15/04/2008 17:15
111 aaaa 16/03/2008 1 667 15/04/2008 17:15
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1 667 15/04/2008 17:15

.........................
.....................................................................667 15/04/2008 17:15


next insert ......
ID fname new_date val_holiday unique number date_time
--------------------------------------------------------------------------------------------------------------------

111 aaaa 15/03/2008 1 668 15/04/2008 08:15
111 aaaa 16/03/2008 1 668 15/04/2008 08:15
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1 668 15/04/2008 08:15

.........................
.....................................................................668 15/04/2008 08:15



TNX

View 3 Replies View Related

Number Of Rows In A Table

Nov 18, 2007

HI!
1.select count(*) from sales
2.select rows from sysindexes where id=object_id('sales') and indid<2

both queries return number of rows.
can anyone tell me which one is better?

View 2 Replies View Related

T-SQL (SS2K8) :: Can It Change Columns Of A Table Values To Rows

May 14, 2014

I have a table with this info:

NrCard numberPersonAuto123456789101112
11111111111111111111User1VW Jetta6,46,46,46,45,825,825,825,825,825,825,826,4
22222222222222222222User2Honda CR-V 13,2113,2113,2112,0112,0112,0112,0112,0112,0112,0113,2113,21

How I can get this result:

NrCard numberPersonAutomonthvalue
11111111111111111111User1VW Jetta16,4
11111111111111111111User1VW Jetta26,4
11111111111111111111User1VW Jetta36,4
11111111111111111111User1VW Jetta45,82
11111111111111111111User1VW Jetta55,82
11111111111111111111User1VW Jetta65,82

[code]....

Should I use unpivot or pivot?

View 2 Replies View Related

What Is The Easiest Way To Get The Number Of Rows In A Table?

Jul 24, 2007

With classic asp I would do something like this:
set conn = server.createobject("ADODB.Connection")
conn.open "PROVIDER=SQLOLEDB;DATA SOURCE=sqlservername;UID=username;PWD=password;DATABASE=databasename "set rs = conn.execute("select count(*) from myTable")response.write rs(0)How can I do this with asp.net in the fewest number of lines?  

View 3 Replies View Related

Return Number Of Rows From A Table

Dec 9, 2007

Im am trying to return the number of rows in a table and i only can get a response of true thanks for any help 

View 3 Replies View Related

How To Find The Number Of Rows In A Table

May 12, 2006

I try to find the number of rows in a table with this commands:
CountRec = New SqlParameterCountRec.ParameterName = "@countrec"CountRec.SqlDbType = SqlDbType.IntCountRec.Value = 0MyCommand = New Data.SqlClient.SqlCommand()MyCommand.CommandText = "select count(*) as @countrec from Customer;"MyCommand.CommandType = Data.CommandType.TextMyCommand.Connection = MyConnectionMyCommand.Parameters.Add(CountRec)MyCommand.Connection.Open()MyReader = MyCommand.ExecuteReaderiRecordCount = CountRec.Value
This is the result:
Incorrect syntax near '@countrec'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '@countrec'.Source Error:




Line 39:
Line 40: MyCommand.Connection.Open()
Line 41: MyReader = MyCommand.ExecuteReader
Line 42: iRecordCount = CountRec.Value
Line 43:
Source File: E:DevelopWebASPwebAccessTimberSalesUserEntry.aspx.vb    Line: 41
What to do? I need a complete example to see how it works.
Thanks...

View 3 Replies View Related

Number Of Table Rows In The Catalog

Mar 11, 2008

Hi,

What catalog table has the number of rows of a table ?

View 11 Replies View Related

Limit Of Number Of Rows In A Table ?

Jun 28, 2007

Is there a limit of how many rows a table can have in SQL compact Edition? I didn't find anything in the documentation, but I get regularly a funny error message "Expression evaluation caused an overflow. [ Name of function (if known) = ]" when I try to create record number 32768 (is equal to 2 to the power of 15).

Where is this limit documented ?




Code Snippet

const string connectionString = "Data Source='" + dbFileName + "'; Max Database Size = 4091; temp file max size = 4091";



using (SqlCeEngine testEngine = new SqlCeEngine(connectionString)) {
testEngine.CreateDatabase();
}






using (SqlCeCommand addMValuesTableComand = testDbConnection.CreateCommand()) {
addMValuesTableComand.CommandText = "CREATE TABLE MValues (MSerieId int, TimeStamp smallint, Value real, PRIMARY KEY(MSerieId, TimeStamp))";
addMValuesTableComand.ExecuteNonQuery();
}

//fill table
StatusLabel.Text = "fill MValues Table";
using (SqlCeCommand fillTableComand = testDbConnection.CreateCommand()) {
int i = 0;
try {
int iterationCount = (int)RecordsCountNumericUpDown.Value;

ProgressBar.Value = 0;
ProgressBar.Maximum = iterationCount;
for (i = 0;i < iterationCount;i++) {
fillTableComand.CommandText = "INSERT MValues VALUES (1, " + i.ToString() + ", " + (i/100.0).ToString() + ")";
fillTableComand.ExecuteNonQuery();
ProgressBar.Value = i+1;
}
} catch (Exception ex) {
ErrorTextBox.Text = "Error occured" + Environment.NewLine +
"Iterations: " + i.ToString() + Environment.NewLine +
"Error Message: " + ex.ToString();
}
}

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved