I want YYYYMMDD.
If I do this it works:
SELECT CONVERT(varchar(8), GETDATE(), 112)
Gives me this:
20141114
If I treat as parameter it doesn't:
DECLARE @date_start datetime
SET @date_start = CONVERT(varchar(8), GETDATE(), 112)
SELECT @date_start;
Gives me this:
2014-11-14 00:00:00.000
how to pass the converted value in 112 style as a parameter?
I am trying to create a stored procedure that Pulls in Chargeable and Non Chargeable hours for our employees however When I run the Stored Procedure I get this error "Conversion failed when converting date and/or time from character string." I am having a hard time figuring out were this is happening in the Stored Procedure. Also I would like to be able to Add a parameter that would be the StartDate and EndDate for which the stored procedure would pull time for.
ALTER PROCEDURE [dbo].[Chargeability]
-- Add the parameters for the stored procedure here
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
[Code] ......
Hi,
It is not exactly what I stated in the subject - It's an outcome - exception thrown while executing non-query command.
I get this exception when I try to execute my stored procedure that takes datetime as one of its parameters.
I am using dataset designer to create table adapters and build queries. Then I simply use objectdatasource component that uses one of the table adapters and bind it to for example a detailsview control.
When I run this in debug mode and trace the objects everything looks perfect including these datetime parameters. It is sql server that throws the exception. I ran the sql profiler to see what exactly is going on, and I captured the command that is sent by ADO - it's broken into several lines right in the middle of my datetime parameters... this is the source of the problem. Everything is working fine when I take this command and execute it as a single line in the sql management studio.
Is there anything about ADO that I do not know?
Hi
I have an insert stored procedure with a parameter @eventDate date type date time. I have written a web form that takes the textbox.text value and assigns to the @eventDate parameter using a querystring. Howevr when I run the application I get a SQL Exception error converting data type nvarchar to datetime.
I have tried dssqlInsertEvent.InsertParameters.add("EventDate", convert.todatetime(txtEventDate.text)); wbut received another error.
Any assistance would be greatly appreciated.
I'm getting the error Error converting data type DBTYPE_DBTIMESTAMP to datetime when I try to import a date field from Oracle to SQL Server.
SELECT CAST(cancel_dt as datetime) FROM OPENQUERY(orcldb, 'SELECT cancel_dt FROM tablename WHERE id= 12345')
The date in Oracle is 19-JUN-99, but it's coming over as 06/19/0999 and it throws the error because the year 999 is invalid in SQL Server. Any ideas on why Oracle or SQL server would convert the year to 0999 instead of 1999?
This is also happening on a value 24-SEP-07 coming over as 09/24/0207
Most other date values work, so I'd really like to get in depth into the process that occurs when converting to a SQL Server datetime.
hi
i want to pass a datetime variable from a asp page to MSSQL through a stored procedure, & i get this error:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E07)
[Microsoft][ODBC SQL Server Driver][SQL Server]Error converting data type varchar to datetime.
this is the code that i use in page:
strsql="sp_inventory @timee=' " & RecievedDate & " ' "
also i use this one:
but i still get this error
strsql="sp_inventory @timee=' " & cdate(RecievedDate) & " ' "
this is maybe useful that i get this errot on some PCs, not all the computeres.
sometimes work well, & sth not work.
Here is the stored procedure
the data type for the column b_trn_tentdte is decimal(8,0).
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER Procedure Prc_New_cus_wo_prev_posted
@b_trn_tendte_Beg_Date datetime
,@b_trn_tendte_End_Date datetime
@b_trn_tendte_Beg_Date1 datetime
,@b_trn_tendte_End_Date2 datetime
as
declare @Beg_tentdte datetime
declare @End_tentdte datetime
declare @Beg_tentdte1 datetime
declare @Beg_tentdte2 datetime
set @Beg_tentdte = convert(varchar(10), @b_trn_tendte_Beg_Date, 112)
set @End_tentdte = convert(varchar(10), @b_trn_tendte_End_Date, 112)
set @Beg_tentdte1 = convert(varchar(10), @b_trn_tendte_Beg_Date1, 112)
set @Beg_tentdte2 = convert(varchar(10), @b_trn_tendte_End_Date2, 112)
/* this query looks for customers with posted
transactions but none prior to the date range
in question */
Select distinct b_cus_cname
from
bar_cus_db_rec
,bar_trn_db_rec b
where b.b_trn_instid = ''
and b.b_trn_instid = b_cus_instid
and b.b_trn_actid = b_cus_cusid
and convert(varchar(10), b.b_trn_tentdte) between @Beg_tentdte and @End_tentdte
and not exists (select c.b_trn_actid
from bar_trn_db_rec c
where c.b_trn_instid = b.b_trn_instid
--and c.b_trn_tentdte between 19970901 and 20030229
and convert(varchar(10), c.b_trn_tentdte) between @Beg_tentdte1 and @Beg_tentdte2
and c.b_trn_actid = b.b_trn_actid)
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
every time I run the query, I get this error message:
Error converting data type varchar to datetime.
thanks for your assistance.
An application i am using creates an error.
Using SQL-profiler i catch this statement:
exec sp_executesql N'insert into RECORDING_SCHEDULE (programme_oid, capture_source_oid, filename, status, recording_group, recording_type, manual_channel_oid,
manual_start_time, manual_end_time, quality_level, pre_pad_minutes, post_pad_minutes) values (@P1,@P2,@P3,@P4,@P5,@P6,@P7,@P8,@P9,@P10,@P11,@P1 2)',N'@P1 int,@P2 int,@P3
nvarchar(19),@P4 int,@P5 int,@P6 int,@P7 int,@P8 datetime,@P9 datetime,@P10 int,@P11 int,@P12 int',177748,2,N'Lilla röda traktorn',4,40,5,16,''2006-06-21
17:00:00:000'',''2006-06-21 20:00:00:000'',1,1,2
After removing the double ' around the date and time parts i get the following error when running in QA:
Msg 8114, Level 16, State 5, Line 0
Error converting data type varchar to datetime.
If a remove the time portion it works.
The DDL for the table is:
CREATE TABLE [dbo].[RECORDING_SCHEDULE](
[oid] [int] IDENTITY(1,1) NOT NULL,
[programme_oid] [int] NULL,
[capture_source_oid] [int] NULL,
[status] [smallint] NOT NULL,
[filename] [varchar](255) NULL,
[recording_type] [int] NULL,
[recording_group] [int] NULL,
[manual_start_time] [datetime] NULL,
[manual_end_time] [datetime] NULL,
[manual_channel_oid] [int] NULL,
[quality_level] [int] NULL CONSTRAINT [DF__RECORDING__quali__38996AB5] DEFAULT ((0)),
[pre_pad_minutes] [int] NULL CONSTRAINT [DF__RECORDING__pre_p__398D8EEE] DEFAULT ((0)),
[post_pad_minutes] [int] NULL CONSTRAINT [DF__RECORDING__post___3A81B327] DEFAULT ((0)),
CONSTRAINT [aaaaaRECORDING_SCHEDULE_PK] PRIMARY KEY NONCLUSTERED
What am I missing?
Hi
I am trying to transfer data from Access 2000 database to SQL server 2005 via SSIS. My access database table has a field with data type Date/Time and SQL server table has a field with data type datetime. When I am running the SSIS package, it is throwing the following error and stops execution.
[SQL Server Destination [12466]] Error: An OLE DB error has occurred. Error code: 0x80040E07. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E07 Description: "Error converting data type DBTYPE_DBTIMESTAMP to datetime.".
Please help.
Thanks in advance,
Ramzee
Hi
I am trying to migrate data from oracle to sql server 2005 in sql server management studio express, most of my data in oracle have been successfully moved into sql server 2005 by using storage procedure. But some of data can't move across becasue i got this error:
Error converting data type DBTYPE_DBTIMESTAMP to datetime
Does anyone know why? Please help?
Thanks
Li
Hi,
I'm pretty desperat after trying solving the above problem in several days. I hope somone here can help me :-)
I have this stored procedure. When I try to Execute the storedprocedure where I have a date as parameter I get the above error.
I checked (many times), that the input parameter is a datetime format (30-05-2008) and also I checked the tabel and it is datetime format. I checked the table to see if it was english datetime format - but all the datetimes that are listet are listed in danish datetime format DD-MM-YYYY.
In the stored procedure I try this:
fProjectSkuTimeStamp >= @ReducedTime
I can't figure out where it gets that nvarchar from?
My stored procedure look like this:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
set NOCOUNT ON
go
ALTER PROCEDURE [dbo].[GetProjectSkuList]
@fProjectFId AS INTEGER = null, --ProjektId
@ReducedTime AS DATETIME --Tidsrum fra
AS
BEGIN
SELECT tProjectSku.fProjectSkuPId, tProjectSku.fCompanyFId, tProjectSku.fProjectFId,
tProjectSku.fProjectSkuDate,
tProjectSku.fOurContactFId, tProjectSku.fOurContactF2Id, tProjectSku.fOrderFId,
tProjectSku.fProjectSkuTimeStamp,
tProjectSku.fProjectSkuNote1, tProjectSku.fProjectSkuNote2, tProjectSku.fContactFId,
tProjectSku.fStoreTransactionsFId,
tProjectSku.fProjectSkuSalesPrice, tCompany.fCompanyName, tProject.fProjectName,
tOurContact.fOurContactFirstName + ' ' + tOurContact.fOurContactLastName AS CreatedBy,
tOurContact_1.fOurContactFirstName + ' ' + tOurContact_1.fOurContactLastName AS Responsible,
tContact.fContactFirstName + ' ' + tContact.fContactLastName AS ContactFullName,
tStoreTransactions.fStoreTransactionsCostPrice,
tStoreTransactions.fStoreTransactionsSerialNo
FROM tOurContact AS tOurContact_1 RIGHT OUTER JOIN
tContact RIGHT OUTER JOIN
tProjectSku LEFT OUTER JOIN
tStoreTransactions ON tProjectSku.fStoreTransactionsFId = tStoreTransactions.fStoreTransactionsPId ON
tContact.fContactPId = tProjectSku.fContactFId LEFT OUTER JOIN
tOrder ON tProjectSku.fOrderFId = tOrder.fOrderPId ON tOurContact_1.fOurContactPId = tProjectSku.fOurContactF2Id LEFT OUTER JOIN
tOurContact ON tProjectSku.fOurContactFId = tOurContact.fOurContactPId LEFT OUTER JOIN
tProject ON tProjectSku.fProjectFId = tProject.fProjectPId LEFT OUTER JOIN
tCompany ON tProjectSku.fCompanyFId = tCompany.fCompanyPId
WHERE
(tProjectSku.fProjectFId = @fProjectFId) AND
--fProjectSkuTimeStamp >= CONVERT(datetime, @ReducedTime, 120)
fProjectSkuTimeStamp >= @ReducedTime
ORDER BY tProjectSku.fProjectSkuPId DESC
END
Kind regards,
simsen :-)
I am trying to convert a column (nvarchar) to date time.
Here is an example of some values:
20110905
20110901
20111003
As expected, I received the following error: 'Conversion failed when converting date and/or time from character string.'
However, I am unsure how I should approach updating the whole column. I would like the format to be '103'.
Hi,
I am havin problems with the following giving a message
Msg 8114, Level 16, State 4, Line 0
Error converting data type varchar to datetime.
exec sp_executesql
@stmt=N'UPDATE CUSTOMER
SET [REQUEST] = @19, [DISC_EXPRY] = @28, [GROUP1] = @29, [GROUP2] = @31, [PR_LEVEL] = @48, [MOD_DATE] = @55, [MEM_CODE] = @63, [MEM_DATE] = @64, [HO_MOD] = @66, [LASTUPDATE] = @78
WHERE [ID] = @Old_1'
, @params=N'@19 nvarchar(4),@28 DateTime,@29 nvarchar(5),@31 nvarchar(5),@48 nvarchar(1),@55 DateTime,@63 nvarchar(7),@64 DateTime,@66 Integer,@78 Float,@Old_1 Integer',
@19= 'NRMA',@28= '1752-09-14',@29= 'ALBUM',@31= 'FRAME',@48= 'A',@55= '2006-10-10',@63= '1003.50',@64= '2006-10-10',@66= 3,@78= 39000.190633,@Old_1= 454636
however, as soon as I remove the datetime fields it works
exec sp_executesql
@stmt=N'UPDATE CUSTOMER
SET [REQUEST] = @19, [GROUP1] = @29, [GROUP2] = @31, [PR_LEVEL] = @48, [MEM_CODE] = @63, [HO_MOD] = @66, [LASTUPDATE] = @78
WHERE [ID] = @Old_1'
, @params=N'@19 nvarchar(4),@29 nvarchar(5),@31 nvarchar(5),@48 nvarchar(1),@63 nvarchar(7),@66 Integer,@78 Float,@Old_1 Integer',
@19= 'NRMA',@29= 'ALBUM',@31= 'FRAME',@48= 'A',@63= '1003.50',@66= 3,@78= 39000.190633,@Old_1= 454636
what am I doing wrong with the datetime parameters?
Grimhael
Hi all,
I need to migrate from a DB with a column containing dates as varchar to a new DB which will have a column with the same content as the source DB but in datetime format.
I have tried to use the cast function but i always get a message saying that the conversion result in an out of range error.
Someone can help me? PLEASE
Thanks
In my sql statement, I don't have any datatype as INT, when I run it, give me error as 'Arithmetic overflow error converting expression to data type int'.
example :
select column1, 2, 3 .....
from (select sum(float) as column1 , ....)
When I hop my cursor on top of column1, it shows (int,null)
I have an issue with validating an XML file I have from a 3rd party.
Willing to improve and standardise company's process, I have created an XML schema collection (SQL 2008R2), but when I validate the XML file against it I always keep getting the above error: Invalid simple type value dateTime.
Definition of dateTime from w3schools website says:
------ Start of quote ----
"DateTime Data Type
The dateTime data type is used to specify a date and a time.
The dateTime is specified in the following form "YYYY-MM-DDThh:mm:ss" where:
YYYY indicates the year
MM indicates the month
DD indicates the day
T indicates the start of the required time section
hh indicates the hour
mm indicates the minute
ss indicates the second
Note: All components are required!
The following is an example of a dateTime declaration in a schema:
<xs:element name="startdate" type="xs:dateTime"/>
An element in your document might look like this:
<startdate>2002-05-30T09:00:00</startdate>
------ End of quote ----
So I would assume that dates like 2012-10-24T14:23:00 or 2012-10-24T14:15:00 should be fine, but no -fails.
It works though only if I add "Z" at the end. Obviously 3rd party do not want to change anything, as it works for ages.
Hi all,In the beginning of this month I've build a website with a file-upload-control. When uploading a file, a record (filename, comment, datetime) gets written to a SQLExpress database, and in a gridview a list of the files is shown. On the 7th of September I uploaded some files to my website, and it worked fine. In the database, the datetime-record shows "07/09/2006 11:45". When I try to upload a file today, it gives me the following error: Error: Arithmetic overflow error converting expression to data type datetime. The statement has been terminated.While searching in google, i found it might have something to do with the language settings of my SQLExpress, I've tried changing this, but it didn't help. What I find weird is that it worked fine, and now it doesn't anymore. Here is my code of how I get the current date to put it into the database:1 SqlDataSource2.InsertParameters.Add("DateInput", DateTime.Now.ToString());
Am I doing something wrong, or am I searching for a solution in the wrong place? best regards, Dimitri
Hi,
I'm having this error with my page, user picks the date -using the AJAX Control Toolkit Calender with the format of ( dd/MM/yyyy ).
It looks like the application current format is MM/dd/yyyy, because it shows the error page if the day is greater than 12, like: 25/03/2007
What is wrong?
Here is the error page:
Server Error in '/' Application.
Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Any help will be appreciated!
The following codes give me the error "arithmetic overflow error converting expression to data type datetime" Unfortunately, the datatype of date of this database is still varchar(50)
select date from tbltransaction
where datepart(wk,convert(datetime,date,103)) = 15
I have the following code and i want to passed more than one value:
DECLARE @myvendedor AS varchar(255)
SET @myvendedor = '87,30'
print @myvendedor
SELECT top 10 ECOM.COM1,* from ecom (nolock) WHERE ecom.PORVEND=1 AND ECOM.VENDEDOR IN (@myvendedor)
Table Field ECOM.VENDEDOR is Numeric(4,0)
This error occur:
87,30 --Result of PRINT
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
I change :
DECLARE @myvendedor AS numeric(4,0)
and this error appear:
Msg 8114, Level 16, State 5, Line 2
Error converting data type varchar to numeric.
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014]
GO
IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL
DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
[code]....
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric
declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedAfter testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedHey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View RelatedHi,
I have a column of type datetime in sqlserver 2000. Whenever I try to insert the date
'31/08/2006 23:28:59'
I get the error "...datetime data type resulted in an out-of-range datetime value"
I've looked everywhere and I can't solve the problem. Please note, I first got this error from an asp.net page and in order to ensure that it wasn't some problem with culture settings I decided to run the query straight in Sql Query Anaylser. The results were the same. What else could it be?
cheers,
Ernest
I am inserting date and time data into a SQL Server 2012 Express table from an application. The application is providing the date and time as a string data type. Is there a TSQL way to convert the date and time string to an SQL datetime date type? I want to do the conversion, because SQL displays an error due to the
My date and time string from the application looks like : 3/11/2014 12:57:57 PM
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHi, I got this field (dateSubmitted) having a data type of DateTime but I receive this error "Unable to cast object of type 'System.DateTime' to type 'System.String'." All value for dateSubmitted field are 12/27/2007 12:00:00 AM. cheers,imperialx
View 3 Replies View Related