T-SQL (SS2K8) :: Delete All Rows Satisfying Certain Condition From Table A And Related Records From B And C
Apr 14, 2015
I have around 3 tables having around 20 to 30gb of data. My table A related to table B by a FK and same way table B related to table C by FK. I would like to delete all rows satisfying certain condition from table A and all corresponding related records from table B and C. I have created a query to delete the grandchild first, followed by child table and finally parent. I have used inner join in my delete query. As you all know, inner join delete operations, are going to be extremely resource Intensive especially on bigger tables.
What is the best approach to delete all these rows? There are many constraints, triggers on these tables. Also, there might be some FK relations to other tables as well.
I need to delete records from a table (Table1) which has a foreign key column in a related table (Table2).
Table1 columns are: table1Id; Name. Table2 columns include Table2.table1Id which is the foreign key to Table1.
What is the syntax to delete records from Table1 using Table1.Name='some name' and remove any records in Table2 that have Table2.table1Id equal to Table1.table1Id?
--Table 1 "Employee" CREATE TABLE [MyCompany].[Employee]( [EmployeeGID] [int] IDENTITY(1,1) NOT NULL, [BranchFID] [int] NOT NULL, [FirstName] [varchar](50) NOT NULL, [MiddleName] [varchar](50) NOT NULL, [LastName] [varchar](50) NOT NULL, CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED ( [EmployeeGID] ) GO ALTER TABLE [MyCompany].[Employee] WITH CHECK ADD CONSTRAINT [FK_Employee_BranchFID] FOREIGN KEY([BranchFID]) REFERENCES [myCompany].[Branch] ([BranchGID]) GO ALTER TABLE [MyCompany].[Employee] CHECK CONSTRAINT [FK_Employee_BranchFID]
-- Table 2 "Branch" CREATE TABLE [Mycompany].[Branch]( [BranchGID] [int] IDENTITY(1,1) NOT NULL, [BranchName] [varchar](50) NOT NULL, [City] [varchar](50) NOT NULL, [ManagerFID] [int] NOT NULL, CONSTRAINT [PK_Branch] PRIMARY KEY CLUSTERED ( [BranchGID] ) GO ALTER TABLE [MyCompany].[Branch] WITH CHECK ADD CONSTRAINT [FK_Branch_ManagerFID] FOREIGN KEY([ManagerFID]) REFERENCES [MyCompany].[Employee] ([EmployeeGID]) GO ALTER TABLE [MyCompany].[Branch] CHECK CONSTRAINT [FK_Branch_ManagerFID]
--Foreign IDs = FID --generated IDs = GID Then I try a simple single row DELETE
DELETE FROM MyCompany.Employee WHERE EmployeeGID= 39
Well this might look like a very basic error: I get this Error after trying to delete something from Table €œEmployee€?
The DELETE statement conflicted with the REFERENCE constraint "FK_Branch_ManagerFID". The conflict occurred in database "MyDatabase", table "myCompany.Branch", column 'ManagerFID'.
Yes what I€™ve been doing is to deactivate the foreign key constraint, in both tables when performing these kinds of operations, same thing if I try to delete a €œBranch€? entry, basically each entry in €œbranch€? and €œEmployee€? is child of each other which makes things more complicated.
My question is, is there a simple way to overcome this obstacle without having to deactivate the foreign key constraints every time or a good way to prevent this from happening in the first place? Is this when I have to use €œON DELETE CASCADE€? or something?
I am trying to delete the records in 2 related tables. The 'child' table has a field called [SETA],
I want to delete all the records in this table that contain the same info, as well all the fields in the parent table that is related to this table. They share the [ID] field as key. This is my code:
Code: DELETE FROM Student a full outer JOIN Qualification b on a.[ID] =b.[ID] WHERE b.[SETA] = @SETA
I have the following scenario : CustomerDetail customerid customername status app_no
[status = 0 means customer virtually deleted]
CustomerArchive archiveno [autoincrement] customerid customername status
At the end of the month, I have to physically delete customers. I have written two stored procs:
proc1 create proc spoc_startdeletion as declare @app_no int select @app_no = (select app_no from customerdetail where status=0) EXEC spoc_insertcustomerarchive @app_no -- After transferrin, physically delete delete from customerdetail where status=0
proc2 create proc spoc_insertcustomerarchive @app_no int as insert into customerarchive(customerid,customername,status) select customerid,customername,status from customerdetail where app_no = @app_no
It works fine if there is only one row with status=0, however the problem is that when there are multiple rows in customerdetail with status=0, it returns 'Subquery returned more than one value'
How can i transfer multiple rows one by one from the customerdetail to customerarchive and then delete the rows once they are transferred.
I can't get my head around this:I want to select all IDs from table A that do not have a related record intable B according to some condition:Table A contains, say, Parents and table B contains Children. I want toselect all Parents that have no children called "Sally" (this is a noddyexample, reminds me of being at Uni again :) ).Any ideas?Thanks
Im trying to delete duplicate records from the output of the query below, if they also meet certain conditions ie 'different address type' then I would merge the records. From the following query how do I go about achieving one and/or the other from either the output, or as an extension of the query itself?
The problem of mine is, I have a datagrid, Which displays data from a Employee(parent) table. Now I want to delete some records based on the user selected checkbox,only those records which has no related records in the EmployeeProject(child) can be deleted.I want to know which are all the record that cannot be deleted? How can I achieve this?
PeopleID in People Table is the primarykey and foreign Key in PeopleCosts Table. PeopleID is an autonumber
The major fields in People Table are PeopleID | MajorVersion | SubVersion. I want to create a new copy of data for existing subversion (say from sub version 1 to 2) in the same table. when the new data is copied my PeopleID is getting incremented and how to copy the related data in the other table (PeopleCosts Table) with the new set of PeopleIDs..
I have 5 columns in my database. 1 column is coming like a dynamic.
I want to convert records from rows to columns. Currently I have a data like this.
Race AgeRange Amount
W 17-20 500 W 21-30 400 W 31-40 200 A 17-20 100 H 41-50 250 H 51-60 290
So age range is not fixed and it can be any and I have one separate relational table for age range where it's coming from. Now I want to convert it into columns like
/****** Object: StoredProcedure [dbo].[dbo.ServiceLog] Script Date: 07/18/2014 14:30:59 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER proc [dbo].[ServiceLogPurge]
-- Purge records dbo.ServiceLog older than 3 months: -- Purge records in small portions to avoid locking production tables -- for a long time. The process takes longer, but can co-exist with -- normal usage of the tables.
[Code] ...
*** Getting this error below when executing the code ***
Msg 102, Level 15, State 1, Procedure ServiceLogPurge, Line 45 Incorrect syntax near 'Failed:'.
I wanted to update Catrgory coulmn of all records in the Master table with the Value of LastUpdate of the CategoryTable the where the ID of the both the table are same
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[Â Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:- GO ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details] @Class_Id int AS BEGIN
I have a table with about half a million records, each representing a patient in my county.
Each record has a field (RRank) which basically sorts the patients as to how "unwell" they are according to a previously-applied algorithm. The most unwell patient has an RRank of 1, the next-most unwell has RRank=2 etc.
I have just deleted several hundred records (which relate to patients now deceased) from the table, thereby leaving gaps in the RRank sequence. I want to renumber the remaining recs to get rid of the gaps.
I can see what I want to accomplish by using ROW_NUMBER, thus:
SELECT ROW_NUMBER() Over (ORDER BY RRank) as RecNumber, RRank FROM RPL ORDER BY RRank
I see the numbers in the RecNumber column falling behind the RRank as I scan down the results
My question is: How to convert this into an UPDATE statement? I had hoped that I could do something like:
UPDATE RISC_PatientList_TEMP SET RRank = ROW_NUMBER() Over (ORDER BY RRank);
but the system informs that window functions will only work on SELECT (which UPDATE isn't) or ORDER BY (which I can't legally add).
I need to find the rows that exist in one table but not in the otherwith this condition:(prod_name exist in table1 and not in table2.prod_name ) AND(prod_name exist in table1 and not in table2.'S'+prod_name )explanation:i want to know if the product not exit and if the combination of thecharachter "S" with the product Name also not exist at the othertableB.Ryuvi
I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2 select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB] GO /****** Object: Trigger   Script Date: 24/07/2015 3:41:38 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON
I am working on SQL server 2005 Reports. I have one report, one dataset is assigned to it, and one table which displays it. Now I come accros requirement that, the column value in the filter condition for the table is present in one textbox.
I can not use textbox i.e. reportItems in filter condition. Can someone suggest me how to use textbox value in filters?
I want to display parent/child records on report. I am not getting the proper solution.
The data is like this:
Sequence ItemCode IsParent
1 XYZ 0 'do not have child record
2 PQR 1 'have child records with sequence no 3
3 ASD 0
3 AFDGE 0
3 VDC 0
4 ASR 1 'have child records with sequence no 5 5 ASR 0
If IsParent = 1, that record has child records with sequence = parent sequenece + 1
I think u can understand the data I need to bind, and it is like:
XYZ
+ PQR
ASD
AFDGE
VDC
ASR
On + click we can do show/hide of child records.
I m not getting how to achive this in SQL server report. Can u give some hint?
Auto_ID Account_ID Account_Name Account_Contact Priority 1 3453463 Tire Co Doug 1 2 4363763 Computers Inc Sam 1 3 7857433 Safety First Heather 1 4 2326743 Car Dept Clark 1 5 2342567 Sales Force Amy 1 6 4363763 Computers Inc Jamie 2 7 2326743 Car Dept Jenn 2
I'm trying to delete all duplicate Account_IDs, but only for the highest priority (in this case it would be the lowest number).
I know the following would delete duplicate Account_IDs:
DELETE FROM staging_account WHERE auto_id NOT IN (SELECT MAX(auto_id) FROM staging_account GROUP BY account_id)
The problem is this doesn't take into account the priority; in the above example I would want to keep auto_ids 2 and 4 because they have a higher priority (1) than auto_ids 6 and 7 (priority 2).
How can I take priority into account and still remove duplicates in this scenario?
What I want is to divide the row value for 'OB Dial Attempts' by the row value for '# Ready To Work Inventory', both in the same table.The code below will work, however I think there is a flaw in my logic. The actual table only has one row per category (MatrixCat) and will always have only one row per category.
CREATE TABLE #NumVals (MatrixCat VARCHAR(100), MatrixVal VARCHAR(100)); INSERT INTO #NumVals (MatrixCat, MatrixVal) VALUES ('# Ready To Work Inventory','606'), ('OB Dial Attempts','255');
I need to query to return a result for each unique machine with the latest date. The example result below would be returned because they have the latest date.
MachineA 5/7/2011 MachineB 5/5/2010
Select Distinct would almost do it, but I need each unique machine that has the latest date.
I have two tables that are related by keys. For instance,Table employee {last_name char(40) not null,first_name char(40) not null,department_name char(40) not null,age int not null,...}Employee table has a primary key (combination of last_name and first_name).Table address {last_name char(40) not null,first_name char(40) not null,street char(200) not null,city char(100) not null,...}Address table has a primary key (combination of last_name, first_name andstreet in which (last_name, first_name) reference (last_name, first_name) inemployee table.Now I want to delete some rows in Address table based on department_name inEmployee table. What is sql for this delete?I appreciate your help. Please ignore table design and I just use it for myproblem illustration.Jim
:confused: Urgent!! Hi there. I use MS SQL server. I would like to separate the data from one table to two tables refer to two reference tables and the following conditions:
Let say these two reference tables are called: Table A & Table B
Group A: 1. Same date in Table A & Table B 2. Same ID in Table A & Table B (ID is not unique) 3. Same name in Table A & Table B (Name is not unique)
Combine all of these three conditions for unique identifier.
I used the following SQL code to separate the required data that match the above conditions to the new table. (Code) select a.Project, a.Site, a.S_number, a.Field_ID, a.Method, a.Analyte, a.Result, a.Units, a.Qualifier, a.Dilution_Factor, a.Reporting_limit, a.Recovery_, a.Matrix, a.CAS_Number, a.Sample_Date, a.Received_Date, a.Prep_Date, a.Analysis_Date, a.Batch_ID, a.Data_Package_num_SDG, a.Lab_Sample_ID, a.Lab into APPL_union_exist from APPL_union_update a, Before_01012004_report b where a.Field_ID = b.[Field Sample] and a.Sample_Date = b.Collected and a.Analyte = b.Analyte
However, I don't know how to delete the data that copied to the new table in original table, or separate that to the new table. Wish someone can help me. Thanks a lot
We have a table setup to track changes that are made to another table, for auditing purposes. How do we compare the most recent record in the change table with the previous record in the change table? Particularly, we have a column named DUE_DATE in the change table and want to identify when the most recent change has a different DUE_DATE than the previous change made.